- 08 2月, 2007 23 次提交
-
-
由 Oliver Neukum 提交于
if a driver returns an error in fill_read_buffer(), the buffer will be marked as filled. Subsequent reads will return eof. But there is no data because of an error, not because it has been read. Not marking the buffer filled is the obvious fix. Signed-off-by: NOliver Neukum <oliver@neukum.name> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
This patch removes redundant argument checks for kobject_put(). Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
This patch removes redundant argument checks for kobject_put(). Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Frederik Deweerdt 提交于
Lockdep issues the following warning: [ 9.064000] ============================================= [ 9.064000] [ INFO: possible recursive locking detected ] [ 9.064000] 2.6.20-rc3-mm1 #3 [ 9.064000] --------------------------------------------- [ 9.064000] init/1 is trying to acquire lock: [ 9.064000] (&sysfs_inode_imutex_key){--..}, at: [<c03e6afc>] mutex_lock+0x1c/0x1f [ 9.064000] [ 9.064000] but task is already holding lock: [ 9.064000] (&sysfs_inode_imutex_key){--..}, at: [<c03e6afc>] mutex_lock+0x1c/0x1f [ 9.065000] [ 9.065000] other info that might help us debug this: [ 9.065000] 2 locks held by init/1: [ 9.065000] #0: (tty_mutex){--..}, at: [<c03e6afc>] mutex_lock+0x1c/0x1f [ 9.065000] #1: (&sysfs_inode_imutex_key){--..}, at: [<c03e6afc>] mutex_lock+0x1c/0x1f [ 9.065000] [ 9.065000] stack backtrace: [ 9.065000] [<c010390d>] show_trace_log_lvl+0x1a/0x30 [ 9.066000] [<c0103935>] show_trace+0x12/0x14 [ 9.066000] [<c0103a2f>] dump_stack+0x16/0x18 [ 9.066000] [<c0138cb8>] print_deadlock_bug+0xb9/0xc3 [ 9.066000] [<c0138d17>] check_deadlock+0x55/0x5a [ 9.066000] [<c013a953>] __lock_acquire+0x371/0xbf0 [ 9.066000] [<c013b7a9>] lock_acquire+0x69/0x83 [ 9.066000] [<c03e6b7e>] __mutex_lock_slowpath+0x75/0x2d1 [ 9.066000] [<c03e6afc>] mutex_lock+0x1c/0x1f [ 9.066000] [<c01b249c>] sysfs_drop_dentry+0xb1/0x133 [ 9.066000] [<c01b25d1>] sysfs_hash_and_remove+0xb3/0x142 [ 9.066000] [<c01b30ed>] sysfs_remove_file+0xd/0x10 [ 9.067000] [<c02849e0>] device_remove_file+0x23/0x2e [ 9.067000] [<c02850b2>] device_del+0x188/0x1e6 [ 9.067000] [<c028511b>] device_unregister+0xb/0x15 [ 9.067000] [<c0285318>] device_destroy+0x9c/0xa9 [ 9.067000] [<c0261431>] vcs_remove_sysfs+0x1c/0x3b [ 9.067000] [<c0267a08>] con_close+0x5e/0x6b [ 9.067000] [<c02598f2>] release_dev+0x4c4/0x6e5 [ 9.067000] [<c0259faa>] tty_release+0x12/0x1c [ 9.067000] [<c0174872>] __fput+0x177/0x1a0 [ 9.067000] [<c01746f5>] fput+0x3b/0x41 [ 9.068000] [<c0172ee1>] filp_close+0x36/0x65 [ 9.068000] [<c0172f73>] sys_close+0x63/0xa4 [ 9.068000] [<c0102a96>] sysenter_past_esp+0x5f/0x99 [ 9.068000] ======================= This is due to sysfs_hash_and_remove() holding dir->d_inode->i_mutex before calling sysfs_drop_dentry() which calls orphan_all_buffers() which in turn takes node->i_mutex. Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
This patch prevents a race between IO and removing a file from sysfs. It introduces a list of sysfs_buffers associated with a file at the inode. Upon removal of a file the list is walked and the buffers marked orphaned. IO to orphaned buffers fails with -ENODEV. The driver can safely free associated data structures or be unloaded. Signed-off-by: NOliver Neukum <oliver@neukum.name> Acked-by: NManeesh Soni <maneesh@in.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
Change function call order in device_bind_driver(). If we create symlinks (which might fail) before adding the device to the list we don't have to clean up afterwards (which we didn't). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
Don't stop on the first ->probe error that is not -ENODEV/-ENXIO. There might be a driver registered returning an unresonable return code, and this stops probing completely even though it may make sense to try the next possible driver. At worst, we may end up with an unbound device. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
Check the return value of device_register() in platform_bus_init(). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
Make make_class_name() return NULL on error and fixup callers in the driver core. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
/sys/module/usbcore/ |-- drivers | |-- usb:hub -> ../../../subsystem/usb/drivers/hub | |-- usb:usb -> ../../../subsystem/usb/drivers/usb | `-- usb:usbfs -> ../../../subsystem/usb/drivers/usbfs |-- holders | |-- ehci_hcd -> ../../../module/ehci_hcd | |-- uhci_hcd -> ../../../module/uhci_hcd | |-- usb_storage -> ../../../module/usb_storage | `-- usbhid -> ../../../module/usbhid |-- initstate Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This adds the module name to all USB drivers, if they are built into the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/ Cc: Kay Sievers <kay.sievers@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This adds the module name to all SERIO drivers, if they are built into the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/ Cc: Kay Sievers <kay.sievers@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This adds the module name to all PCI drivers, if they are built into the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/ It also fixes up the IDE core, which was calling __pci_register_driver() directly. Cc: Kay Sievers <kay.sievers@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This changes the module core to only create the drivers/ directory if we are going to put something in it. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
If we allow NULL as the new parent in device_move(), we need to make sure that the device is placed into the same place as it would if it was newly registered: - Consider the device virtual tree. In order to be able to reuse code, setup_parent() has been tweaked a bit. - kobject_move() can fall back to the kset's kobject. - sysfs_move_dir() uses the sysfs root dir as fallback. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
device_is_registered() will always be false for a device with no bus. Remove this check and trust the caller to know what they're doing. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This lets the network core have the ability to handle suspend/resume issues, if it wants to. Thanks to Frederik Deweerdt <frederik.deweerdt@gmail.com> for the arm driver fixes. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Cc: <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Cc: <linux-pcmcia@lists.infradead.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
It should be ok to pass in NULL for some kobject functions, so add error checking for all exported kobject functions to be more robust. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: Remove incorrect kgdb define JFS: call io_schedule() instead of schedule() to avoid deadlock JFS: Add lockdep annotations JFS: Avoid BUG() on a damaged file system
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits) [GFS2] make gfs2_writepages() static [GFS2] Unlock page on prepare_write try lock failure [GFS2] nfsd readdirplus assertion failure [DLM] fix softlockup in dlm_recv [DLM] zero new user lvbs [DLM/GFS2] indent help text [GFS2] Fix unlink deadlocks [GFS2] Put back semaphore to avoid umount problem [GFS2] more CURRENT_TIME_SEC [GFS2/DLM] fix GFS2 circular dependency [GFS2/DLM] use sysfs [GFS2] make lock_dlm drop_count tunable in sysfs [GFS2] increase default lock limit [GFS2] Fix list corruption in lops.c [GFS2] Fix recursive locking attempt with NFS [DLM] can miss clearing resend flag [DLM] saved dlm message can be dropped [DLM] Make sock_sem into a mutex [GFS2] Fix typo in glock.c [GFS2] use CURRENT_TIME_SEC instead of get_seconds in gfs2 ...
-
- 07 2月, 2007 17 次提交
-
-
由 Adrian Bunk 提交于
On Mon, Jan 29, 2007 at 08:45:28PM -0800, Andrew Morton wrote: >... > Changes since 2.6.20-rc6-mm2: >... > git-gfs2-nmw.patch >... > git trees >... This patch makes the needlessly global gfs2_writepages() static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
When the try lock of the glock failed in prepare_write we were incorrectly exiting this function with the page still locked. This was resulting in further I/O to this page hanging. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits) [IA64] swiotlb abstraction (e.g. for Xen) [IA64] swiotlb cleanup [IA64] make swiotlb use bus_to_virt/virt_to_bus [IA64] swiotlb bug fixes [IA64] Hook up getcpu system call for IA64 [IA64] clean up sparsemem memory_present call [IA64] show_mem() for IA64 sparsemem NUMA [IA64] missing exports hwsw_sync_... [IA64] virt_to_page() can be called with NULL arg [IA64] alignment bug in ldscript [IA64] register memory ranges in a consistent manner [IA64] Enable SWIOTLB only when needed [IA64-SGI] Check for TIO errors on shub2 Altix [IA64] remove bogus prototype ia64_esi_init() [IA64] Clear IRQ affinity when unregistered [IA64] fix ACPI Kconfig issues [IA64] Fix NULL-pointer dereference in ia64_machine_kexec() [IA64] find thread for user rbs address [IA64] use snprintf() on features field of /proc/cpuinfo [IA64] enable singlestep on system call ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: ocfs2_link() journal credits update
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: USB HID: handle multi-interface devices for Apple macbook pro properly HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG USB HID: fix bogus comment in hid_get_class_descriptor() USB HID: remove hid_find_field_by_usage() HID: API - fix leftovers of hidinput API in USB HID HID: hid debug from hid-debug.h to hid layer hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter hid: quirk for multi-input devices with unneeded output reports hid: allow force feedback for multi-input devices
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Remove obsolete prototypes IB/ehca: Remove use of do_mmap() RDMA/addr: Handle ethernet neighbour updates during route resolution IB: Make sure struct ib_user_mad.data is aligned IB/srp: Don't wait for response when QP is in error state. IB: Return qp pointer as part of ib_wc IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (32 commits) mmc: tifm: replace kmap with page_address mmc: sdhci: fix voltage ocr mmc: sdhci: replace kmap with page_address mmc: wbsd: replace kmap with page_address mmc: handle pci_enable_device() return value in sdhci mmc: Proper unclaim in mmc_block mmc: change wbsd mailing list mmc: Graceful fallback for fancy features mmc: Handle wbsd's stupid command list mmc: Allow host drivers to specify max block count mmc: Allow host drivers to specify a max block size tifm_sd: add suspend and resume functionality tifm_core: add suspend/resume infrastructure for tifm devices tifm_7xx1: prettify tifm_7xx1: recognize device 0xac8f as supported tifm_7xx1: switch from workqueue to kthread tifm_7xx1: Merge media insert and media remove functions tifm_7xx1: simplify eject function Add dummy_signal_irq function to save check in ISR Remove unused return value from signal_irq callback ...
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (37 commits) [S390] Avoid excessive inlining. [S390] Mark kernel text section read-only. [S390] Convert memory detection into C code. [S390] Calibrate delay and bogomips. [S390] Hypervisor filesystem (s390_hypfs) for z/VM [S390] Add crypto support for 3592 tape devices [S390] boot from NSS support [S390] Support for s390 Pseudo Random Number Generator [S390] ETR support. [S390] noexec protection [S390] move crypto options and some cleanup. [S390] cio: Don't spam debug feature. [S390] Cleanup of CHSC event handling. [S390] cio: declare hardware structures packed. [S390] Add set_fs(USER_DS) to start_thread(). [S390] cio: Catch operand exceptions on stsch. [S390] Fix register usage description. [S390] kretprobe_trampoline_holder() in wrong section. [S390] Fix kprobes breakpoint handling. [S390] Update maintainers file. ...
-
由 David Howells 提交于
Fix the key serial number collision avoidance code in key_alloc_serial(). This didn't use to be so much of a problem as the key serial numbers were allocated from a simple incremental counter, and it would have to go through two billion keys before it could possibly encounter a collision. However, now that random numbers are used instead, collisions are much more likely. This is fixed by finding a hole in the rbtree where the next unused serial number ought to be and using that by going almost back to the top of the insertion routine and redoing the insertion with the new serial number rather than trying to be clever and attempting to work out the insertion point pointer directly. This fixes kernel BZ #7727. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Minor cleanup [CIFS] Missing free in error path [CIFS] Reduce cifs stack space usage [CIFS] lseek polling returned stale EOF
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (40 commits) [MIPS] Yosemite: Fix missing parens in SERIAL_READ_1 macro [MIPS] Fix warnings in run_uncached on 32bit kernel [MIPS] Comment fix [MIPS] MT: Nuke duplicate mips_mt_regdump() prototype. [MIPS] Alchemy: Fix PCI-memory access [MIPS] Move .set reorder out of conditional code [MIPS] Check FCSR for pending interrupts before restoring from a context. [MIPS] Jaguar ATX: Fix large number of warnings. [MIPS] Jaguar: Fix MAC address detection after platform_device conversion. [MIPS] SMTC: Make a bunch of functions and variables static. [MIPS] Use compat_sys_pselect6 [MIPS] SMTC: Cleanup idle hook invocation. [MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity [MIPS] IRIX: Linux coding style cleanups. [MIPS] PB1100: Fix pile of warnings [MIPS] Alchemy: Fix bunch of warnings [MIPS] Whitespace cleanups. [MIPS] Alchemy: Fix bunch more warnings. [MIPS] Use ARRAY_SIZE macro when appropriate [MIPS] Fix some whitespace damage ...
-
由 Oleg Verych 提交于
Tildes as in path as in filenames are handled correctly now: only files, containing tilde '~', are backups, thus are not valid. [KJ]: Definition of `space' was removed, scripts/Kbuild.include has one. That definition was taken right from the GNU make manual, while Kbuild's version is original. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Bastian Blank <bastian@waldi.eu.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Verych 提交于
GNU binutils, root users, tmpfiles, external modules ro builds must be fixed to do the right thing now. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Horst Schirmeier <horst@schirmeier.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: Daniel Drake <dsd@gentoo.org> Cc: Andi Kleen <ak@suse.de> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Verych 提交于
Replacing overhead of using some (external) programs instead of good old `sh'. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: William Stearns <wstearns@pobox.com> Cc: Martin Schlemmer <azarah@nosferatu.za.org> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Acked-by: NMark Lord <lkml@rtr.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steve French 提交于
Missing tab. Missing entry in changelog Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
arch/mips/lib/uncached.c: In function 'run_uncached': arch/mips/lib/uncached.c:47: warning: comparison is always true due to limited range of data type arch/mips/lib/uncached.c:48: warning: comparison is always false due to limited range of data type arch/mips/lib/uncached.c:57: warning: comparison is always true due to limited range of data type arch/mips/lib/uncached.c:58: warning: comparison is always false due to limited range of data type Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-