- 24 11月, 2011 10 次提交
-
-
git://github.com/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: libata: fix build without BMDMA [libata] ahci_platform: fix DT probing
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs PCI: pciehp: wait 100 ms after Link Training check PCI: pciehp: wait 1000 ms before Link Training check PCI: pciehp: Retrieve link speed after link is trained PCI: Let PCI_PRI depend on PCI PCI: Fix compile errors with PCI_ATS and !PCI_IOV PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Extend array bounds for all filename chars eCryptfs: Flush file in vma close eCryptfs: Prevent file create race condition
-
由 Tyler Hicks 提交于
From mhalcrow's original commit message: Characters with ASCII values greater than the size of filename_rev_map[] are valid filename characters. ecryptfs_decode_from_filename() will access kernel memory beyond that array, and ecryptfs_parse_tag_70_packet() will then decrypt those characters. The attacker, using the FNEK of the crafted file, can then re-encrypt the characters to reveal the kernel memory past the end of the filename_rev_map[] array. I expect low security impact since this array is statically allocated in the text area, and the amount of memory past the array that is accessible is limited by the largest possible ASCII filename character. This patch solves the issue reported by mhalcrow but with an implementation suggested by Linus to simply extend the length of filename_rev_map[] to 256. Characters greater than 0x7A are mapped to 0x00, which is how invalid characters less than 0x7A were previously being handled. Signed-off-by: NTyler Hicks <tyhicks@canonical.com> Reported-by: NMichael Halcrow <mhalcrow@google.com> Cc: stable@kernel.org
-
由 Tyler Hicks 提交于
Dirty pages weren't being written back when an mmap'ed eCryptfs file was closed before the mapping was unmapped. Since f_ops->flush() is not called by the munmap() path, the lower file was simply being released. This patch flushes the eCryptfs file in the vm_ops->close() path. https://launchpad.net/bugs/870326Signed-off-by: NTyler Hicks <tyhicks@canonical.com> Cc: stable@kernel.org [2.6.39+]
-
由 Tyler Hicks 提交于
The file creation path prematurely called d_instantiate() and unlock_new_inode() before the eCryptfs inode info was fully allocated and initialized and before the eCryptfs metadata was written to the lower file. This could result in race conditions in subsequent file and inode operations leading to unexpected error conditions or a null pointer dereference while attempting to use the unallocated memory. https://launchpad.net/bugs/813146Signed-off-by: NTyler Hicks <tyhicks@canonical.com> Cc: stable@kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Check parent options for iterated tests
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Make i2cdev_notifier_call static i2c: Delete ANY_I2C_BUS i2c: Fix device name for 10-bit slave address i2c-algo-bit: Generate correct i2c address sequence for 10-bit target
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: TPS65910: Fix VDD1/2 voltage selector count
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) drm: integer overflow in drm_mode_dirtyfb_ioctl() drivers/gpu/vga/vgaarb.c: add missing kfree drm/radeon/kms/atom: unify i2c gpio table handling drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real ttm: Don't return the bo reserved on error path drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS drm/i915: Fix inconsistent backlight level during disabled drm, i915: Fix memory leak in i915_gem_busy_ioctl(). drm/i915: Use DPCD value for max DP lanes. drm/i915: Initiate DP link training only on the lanes we'll be using drm/i915: Remove trailing white space drm/i915: Try harder during dp pattern 1 link training drm/i915: Make DP prepare/commit consistent with DP dpms drm/i915: Let panel power sequencing hardware do its job drm/i915: Treat PCH eDP like DP in most places drm/i915: Remove link_status field from intel_dp structure drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control drm/i915: Module parameters using '-1' as default must be signed type drm/i915: Turn on another required clock gating bit on gen6. drm/i915: Turn on a required 3D clock gating bit on Sandybridge. ...
-
- 23 11月, 2011 19 次提交
-
-
由 Afzal Mohammed 提交于
Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: NAfzal Mohammed <afzal@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Shubhrajyoti D 提交于
The function i2cdev_notifier_call is used only in i2c-dev file making it static. Also removes the following sparse warning drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call' was not declared. Should it be static? Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Last piece of code using ANY_I2C_BUS was deleted almost 2 years ago, so ANY_I2C_BUS can go away as well. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
10-bit addresses overlap with traditional 7-bit addresses, leading in device name collisions. Add an arbitrary offset to 10-bit addresses to prevent this collision. The offset was chosen so that the address is still easily recognizable. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NWolfram Sang <w.sang@pengutronix.de>
-
由 Jeffrey (Sheng-Hui) Chu 提交于
The wrong bits were put on the wire, fix that. This fixes kernel bug #42562. Signed-off-by: NSheng-Hui J. Chu <jeffchu@broadcom.com> Cc: stable@kernel.org Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Xi Wang 提交于
There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by: NHaogang Chen <haogangchen@gmail.com> Signed-off-by: NXi Wang <xi.wang@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Linus Torvalds 提交于
This reverts commit dc937280. As requested by Ben Herrenschmidt: "This breaks some powerpc platforms at least. The practice of having a node provide an explicit "interrupt-parent" property pointing to itself is an old trick that we've used in the past to allow a device-node to have interrupts routed to different controllers. In that case, the node also contains an interrupt-map, so the node is its own parent, the interrupt resolution hits the map, which then can route each individual interrupt to a different parent." Grant says: "Ah, nuts, yes that is broken then. Yes, please revert the commit and Rob & I will come up with a better solution. Rob, I think it can be done by explicitly checking for np == desc->interrupt_parent in of_irq_init() instead of relying on of_irq_find_parent() returning NULL." Requested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org> Cc: Tanmay Inamdar <tinamdar@apm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mount_subtree() pointless use-after-free iio: fix a leak due to improper use of anon_inode_getfd() microblaze: bury asm/namei.h
-
由 Julia Lawall 提交于
kbuf is a buffer that is local to this function, so all of the error paths leaving the function should release it. Signed-off-by: NJulia Lawall <julia@diku.dk> Cc: Jesper Juhl <jj@chaosbits.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Split the quirks and i2c_rec assignment into separate functions used by both radeon_lookup_i2c_gpio() and radeon_atombios_i2c_init(). This avoids duplicating code and cases where quirks were only added to one of the functions. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
An unlikely race could case a bo to be returned reserved on an error path. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~keithp/linux由 Dave Airlie 提交于
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (25 commits) drm/i915: Fix inconsistent backlight level during disabled drm, i915: Fix memory leak in i915_gem_busy_ioctl(). drm/i915: Use DPCD value for max DP lanes. drm/i915: Initiate DP link training only on the lanes we'll be using drm/i915: Remove trailing white space drm/i915: Try harder during dp pattern 1 link training drm/i915: Make DP prepare/commit consistent with DP dpms drm/i915: Let panel power sequencing hardware do its job drm/i915: Treat PCH eDP like DP in most places drm/i915: Remove link_status field from intel_dp structure drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control drm/i915: Module parameters using '-1' as default must be signed type drm/i915: Turn on another required clock gating bit on gen6. drm/i915: Turn on a required 3D clock gating bit on Sandybridge. drm/i915: enable cacheable objects on Ivybridge drm/i915: add constants to size fence arrays and fields drm/i915: Ivybridge still has fences! drm/i915: forcewake warning fixes in debugfs drm/i915: Fix object refcount leak on mmappable size limit error path. drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work ...
-
由 Al Viro 提交于
d'oh... we'd carefully pinned mnt->mnt_sb down, dropped mnt and attempt to grab s_umount on mnt->mnt_sb. The trouble is, *mnt might've been overwritten by now... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ams_delta_serio - include linux/module.h Input: elantech - adjust hw_version detection logic Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
* git://www.linux-watchdog.org/linux-watchdog: watchdog: fix initialisation printout in s3c2410_wdt watchdog: Don't overwrite error value in wm831x_wdt_set_timeout() watchdog: adx_wdt.c: remove driver
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Revert pnfs ugliness from the generic NFS read code path SUNRPC: destroy freshly allocated transport in case of sockaddr init error NFS: Fix a regression in the referral code nfs: move nfs_file_operations declaration to bottom of file.c (try #2) nfs: when attempting to open a directory, fall back on normal lookup (try #5)
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: remove free-space-cache.c WARN during log replay Btrfs: sectorsize align offsets in fiemap Btrfs: clear pages dirty for io and set them extent mapped Btrfs: wait on caching if we're loading the free space cache Btrfs: prefix resize related printks with btrfs: btrfs: fix stat blocks accounting Btrfs: avoid unnecessary bitmap search for cluster setup Btrfs: fix to search one more bitmap for cluster setup btrfs: mirror_num should be int, not u64 btrfs: Fix up 32/64-bit compatibility for new ioctls Btrfs: fix barrier flushes Btrfs: fix tree corruption after multi-thread snapshots and inode_cache flush
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux由 Linus Torvalds 提交于
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: remove vm_dirties and task->dirties writeback: hard throttle 1000+ dd on a slow USB stick mm: Make task in balance_dirty_pages() killable
-
- 22 11月, 2011 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fix more ET131X build errors staging: et131x depends on NET staging: slicoss depends on NET linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits) USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c USB: option: add PID of Huawei E173s 3G modem OHCI: final fix for NVIDIA problems (I hope) USB: option: release new PID for ZTE 3G modem usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c USB: storage: ene_ub6250: fix compile warnings USB: option: add id for 3G dongle Model VT1000 of Viettel USB: serial: pl2303: rm duplicate id USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH usb-storage: Accept 8020i-protocol commands longer than 12 bytes USB: quirks: adding more quirky webcams to avoid squeaky audio powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit USB: at91: at91-ohci: fix set/get power USB: cdc-acm: Fix disconnect() vs close() race USB: add quirk for Logitech C600 web cam USB: EHCI: fix HUB TT scheduling issue with iso transfer USB: XHCI: resume root hubs when the controller resumes USB: workaround for bug in old version of GCC USB: ark3116 initialisation fix ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: TTY: ldisc, wait for ldisc infinitely in hangup TTY: ldisc, move wait idle to caller TTY: ldisc, allow waiting for ldisc arbitrarily long Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs" RS485: fix inconsistencies in the meaning of some variables pch_uart: Fix DMA resource leak issue serial,mfd: Fix CMSPAR setup tty/serial: Prevent drop of DCD on suspend for Tegra UARTs pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor pch_uart: Support new device LAPIS Semiconductor ML7831 IOH pch_uart: Fix hw-flow control issue tty: hvc_dcc: Fix duplicate character inputs jsm: Change maintainership
-
由 Linus Torvalds 提交于
Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers/base/node.c: fix compilation error with older versions of gcc uio: documentation fixups device.h: Fix struct member documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
* 'char-misc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: ad525x_dpot: Fix AD8400 spi transfer size. pch_phub: Fix MAC address writing issue for LAPIS ML7831 pch_phub: Improve ADE(Address Decode Enable) control pch_phub: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor pch_phub: Support new device LAPIS Semiconductor ML7831 IOH pcie-gadget-spear: Add "platform:" prefix for platform modalias MAINTAINERS: add CHAR and MISC driver maintainers
-
由 Al Viro 提交于
it can fail and in that case ->release() will *not* be called... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
altroot support has been gone for years, along with arch/*/asm/namei.h; looks like a dummy survivor that sat it out in microblaze tree... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'dev' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix up a undefined error in ext4_free_blocks in debugging code ext4: add blk_finish_plug in error case of writepages. ext4: Remove kernel_lock annotations ext4: ignore journalled data options on remount if fs has no journal
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: Allocate larger oid buffer in request msgs ceph: initialize root dentry ceph: fix iput race when queueing inode work
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Log the fact that we've given ELOOP rather than creating a loop minixfs: kill manual hweight(), simplify fs/minix: Verify bitmap block counts before mounting
-
由 Al Viro 提交于
wrong register returned... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-