- 03 1月, 2009 40 次提交
-
-
由 Hannes Eder 提交于
The sparse warning -Wreturn-void ("returning void-valued expression") is off by default, but it is enabled with -Wall, so add -Wno-return-void to CHECKFLAGS to disable it. Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Mike Frysinger 提交于
Headers in userspace should be using the __xxx__ form of the asm, inline, and volatile keywords. Since people like to revert these things without realizing what's going on, have the headers install step autoconvert these keywords. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Mike Frysinger 提交于
Since prototypes with "extern" refer to kernel functions, they make no sense in userspace, so reject them automatically. Signed-off-by: NMike Frysinger <vapier@gentoo.org> [sam: made it into a warning] Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
We now say where we detect the second source of a file, and where we detect a recursively source of the same file. This makes it easier to fix such errors. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
-
由 Sam Ravnborg 提交于
No functional changes Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
No functional changes - only comments. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Added a few comments - no functional change. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
We had a recursive dependency between MMU_MOTOROLA and MMU_SUN3 Fix it by dropping the unused dependencies on MMU_MOTOROLA. MMU_MOTOROLA is set to y only using select so any dependencies are anyway ignored. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (32 commits) ide-atapi: start dma in a drive-specific way ide-atapi: put the rest of non-ide-cd code into the else-clause of ide_transfer_pc ide-atapi: remove timeout arg to ide_issue_pc ide-cd: remove handler wrappers ide-cd: remove xferlen arg to cdrom_start_packet_command ide-atapi: split drive-specific functionality in ide_issue_pc ide-atapi: assign expiry and timeout based on device type ide-atapi: compute cmd_len based on device type in ide_transfer_pc ide: remove the last ide-scsi remnants ide-atapi: remove ide-scsi remnants from ide_pc_intr() ide-atapi: remove ide-scsi remnants from ide_transfer_pc() ide-atapi: remove ide-scsi remnants from ide_issue_pc ide-cd: move cdrom_timer_expiry to ide-atapi.c ide-atapi: teach ide atapi about drive->waiting_for_dma ide-atapi: accomodate transfer length calculation for ide-cd ide-atapi: setup dma for ide-cd ide-atapi: combine drive-specific assignments ide-atapi: add a dev_is_idecd-inline remove ide-scsi ide-floppy: allocate only toplevel packet commands ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb由 Linus Torvalds 提交于
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (31 commits) uwb: remove beacon cache entry after calling uwb_notify() uwb: remove unused include/linux/uwb/debug.h uwb: use print_hex_dump() uwb: use dev_dbg() for debug messages uwb: fix memory leak in uwb_rc_notif() wusb: fix oops when terminating a non-existant reservation uwb: fix oops when terminating an already terminated reservation uwb: improved MAS allocator and reservation conflict handling wusb: add debug files for ASL, PZL and DI to the whci-hcd driver uwb: fix oops in debug PAL's reservation callback uwb: clean up whci_wait_for() timeout error message wusb: whci-hcd shouldn't do ASL/PZL updates while channel is inactive uwb: remove unused beacon group join/leave events wlp: start/stop radio on network interface up/down uwb: add basic radio manager uwb: add pal parameter to new reservation callback uwb: fix races between events and neh timers uwb: don't unbind the radio controller driver when resetting uwb: per-radio controller event thread and beacon cache uwb: add commands to add/remove IEs to the debug interface ...
-
由 Paul Mackerras 提交于
Ben Herrenschmidt is taking over as the primary powerpc architecture maintainer. I'll still be around as his backup/deputy. Signed-off-by: NPaul Mackerras <paulus@samba.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* i8k-updates: i8k: Add Dell Vostro systems i8k: Enable i8k on Dell Precision Systems
-
由 Federico Heinz 提交于
This trivial patch adds support for i8k on the new Dell Vostro models. I tested it on my Vostro 1400, and it works. It does print a warning when loading the module: i8k: unable to get SMM BIOS version But I couldn't figure out how to fix that. The module seems to work fine, anyway... Signed-off-by: NFederico Heinz <fheinz@vialibre.org.ar> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Spencer 提交于
Patch to enable i8k on Dell Precisions. Signed-off-by: NAndy Spencer <spenceal@rose-hulman.edu> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Brueckl 提交于
Signed-off-by: NIngo Brueckl <ib@wupperonline.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* tty-updates: (75 commits) serial_8250: support for Sealevel Systems Model 7803 COMM+8 hso maintainers update patch hso modem detect fix patch against Alan Cox'es tty tree tty: Fix an ircomm warning and note another bug drivers/char/cyclades.c: cy_pci_probe: fix error path Serial: UART driver changes for Cavium OCTEON. Serial: Allow port type to be specified when calling serial8250_register_port. 8250: Serial driver changes to support future Cavium OCTEON serial patches. 8250: Don't clobber spinlocks. fix for tty-serial-move-port tty: We want the port object to be persistent __FUNCTION__ is gcc-specific, use __func__ serial: RS485 ioctl structure uses __u32 include linux/types.h tty: Drop the lock_kernel in the private ioctl hook synclink_cs: Convert to tty_port tty: use port methods for the rocket driver tty: kref the rocket driver tty: make rocketport use standard port->flags tty: Redo the rocket driver locking tty: Make epca use the port helpers ...
-
由 Flavio Leitner 提交于
Add support for Sealevel Systems Model 7803 COMM+8 Signed-off-by: NFlavio Leitner <fleitner@redhat.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Denis Joseph Barrow 提交于
Added D.J. Barrow as maintainer of hso driver. Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Denis Joseph Barrow 提交于
Fixed incorrect check for the modem port, this prevents crashes caused by issueing a tiocmget_submit_urb on endpoints which don't exist for non modem devices. Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Roel Kluin noted that line is unsigned so one test is unneccessary. Also add a warning for another flaw I noticed while making this change. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
We forgot to release resources in one case. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12137Reported-by: NFlorian Lohoff <flo@rfc822.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
Cavium UART implementation is not covered by existing uart_configS. Define a new uart_config (PORT_OCTEON) which is specified by OCTEON platform device registration code. Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
Add flag value UPF_FIXED_TYPE which specifies that the UART type is known and should not be probed. For this case the UARTs properties are just copied out of the uart_config entry. This allows us to keep SOC specific 8250 probe code out of 8250.c. In this case we know the serial hardware will not be changing as it is on the same silicon as the CPU, and we can specify it with certainty in the board/cpu setup code. The alternative is to load up 8250.c with a bunch of OCTEON specific special cases in the probing code. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
In order to use Cavium OCTEON specific serial i/o drivers, we first patch the 8250 driver to use replaceable I/O functions. Compatible I/O functions are added for existing iotypeS. An added benefit of this change is that it makes it easy to factor some of the existing special cases out to board/SOC specific support code. The alternative is to load up 8250.c with a bunch of OCTEON specific iotype code and bug work-arounds. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
In serial8250_isa_init_ports(), the port's lock is initialized. We should not overwrite it. In early_serial_setup(), only copy in the fields we need. Since the early console code only uses a subset of the fields, these are sufficient. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Signed-off-by: NTomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Beregalov 提交于
Hi Alan next-20081204 crashes with the following message: BUG: unable to handle kernel paging request at ffff88007d320248 IP: [<ffffffff803de934>] uart_remove_one_port+0xef/0x111 kfree(info); 393: 49 8d 7d 10 lea 0x10(%r13),%rdi 397: e8 00 00 00 00 callq 39c <uart_remove_one_port+0xef> Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Move the tty_port and uart_info bits around a little. By embedding the uart_info into the uart_port we get rid of lots of corner case testing and also get the ability to go port<->state<->info which is a bit more elegant than the current data structures. Downsides - we allocate a tiny bit more memory for unused ports, upside we've removed as much code as it saved for most users.. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Whitcroft 提交于
In the commit below a new struct serial_rs485 was introduced for a new ioctl: commit c26c56c0 Author: Alan Cox <alan@redhat.com> Date: Mon Oct 13 10:37:48 2008 +0100 tty: Cris has a nice RS485 ioctl so we should steal it This structure uses the __u32 types for some of its members, which leads to the following compile error: $ cc -I.../include -c X.c In file included from X.c:2: .../include/linux/serial.h:185: error: expected specifier-qualifier-list before ‘__u32’ $ It seems that these types are appropriate for this structure as it is to be exposed to userspace. These types are available via linux/types.h so move the include of that outside the __KERNEL__ section. Signed-off-by: NAndy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Use the tty port operations, add refcounting, and refactor a bit to make the refcounting work cleanly. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Now we have our ducks in order we can begin switching to the port operations Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
We will need this kref fitted to make full use of the port operations. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
We need to this ready for using the standard helpers Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Bring this driver into the port locking model Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Now the locking is straight and the port kref usage is straight we can replace lots of chunks of code with the standard port helpers Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Bring epca into line with the port locking. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Denis Joseph Barrow 提交于
Makes TIOCM ioctls for Data Carrier Detect & related functions work like /drivers/serial/serial-core.c potentially needed for pppd & similar user programs. Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-