Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 17 6月, 2009 21 次提交
    • K
      vmscan: low order lumpy reclaim also should use PAGEOUT_IO_SYNC · 78dc583d
      由 KOSAKI Motohiro 提交于 
      Commit 33c120ed ("more aggressively use
lumpy reclaim") increased how aggressive lumpy reclaim was by isolating
both active and inactive pages for asynchronous lumpy reclaim on
costly-high-order pages and for cheap-high-order when memory pressure is
high.  However, if the system is under heavy pressure and there are dirty
pages, asynchronous IO may not be sufficient to reclaim a suitable page in
time.

This patch causes the caller to enter synchronous lumpy reclaim for
costly-high-order pages and for cheap-high-order pages when under memory
pressure.

Minchan.kim@gmail.com said:

Andy added synchronous lumpy reclaim with
c661b078.  At that time, lumpy reclaim is
not agressive.  His intension is just for high-order users.(above
PAGE_ALLOC_COSTLY_ORDER).

After some time, Rik added aggressive lumpy reclaim with
33c120ed.  His intention was to do lumpy
reclaim when high-order users and trouble getting a small set of
contiguous pages.

So we also have to add synchronous pageout for small set of contiguous
pages.

Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NMinchan Kim <Minchan.kim@gmail.com>
Reviewed-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      78dc583d
    • N
      mm: clean up get_user_pages_fast() documentation · d2bf6be8
      由 Nick Piggin 提交于 
      Move more documentation for get_user_pages_fast into the new kerneldoc comment.
Add some comments for get_user_pages as well.

Also, move get_user_pages_fast declaration up to get_user_pages. It wasn't
there initially because it was once a static inline function.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Andy Grover <andy.grover@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d2bf6be8
    • W
      readahead: enforce full sync mmap readahead size · 7ffc59b4
      由 Wu Fengguang 提交于 
      Now that we do readahead for sequential mmap reads, here is a simple
evaluation of the impacts, and one further optimization.

It's an NFS-root debian desktop system, readahead size = 60 pages.
The numbers are grabbed after a fresh boot into console.

approach        pgmajfault      RA miss ratio   mmap IO count   avg IO size(pages)
   A            383             31.6%           383             11
   B            225             32.4%           390             11
   C            224             32.6%           307             13

case A: mmap sync/async readahead disabled
case B: mmap sync/async readahead enabled, with enforced full async readahead size
case C: mmap sync/async readahead enabled, with enforced full sync/async readahead size
or:
A = vanilla 2.6.30-rc1
B = A plus mmap readahead
C = B plus this patch

The numbers show that
- there are good possibilities for random mmap reads to trigger readahead
- 'pgmajfault' is reduced by 1/3, due to the _async_ nature of readahead
- case C can further reduce IO count by 1/4
- readahead miss ratios are not quite affected

The theory is
- readahead is _good_ for clustered random reads, and can perform
  _better_ than readaround because they could be _async_.
- async readahead size is guaranteed to be larger than readaround
  size, and they are _async_, hence will mostly behave better
However for B
- sync readahead size could be smaller than readaround size, hence may
  make things worse by produce more smaller IOs
which will be fixed by this patch.

Final conclusion:
- mmap readahead reduced major faults by 1/3 and no obvious overheads;
- mmap io can be further reduced by 1/4 with this patch.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7ffc59b4
    • W
      readahead: remove redundant test in shrink_readahead_size_eio() · 61b7cbdb
      由 Wu Fengguang 提交于 
      Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      61b7cbdb
    • W
      readahead: introduce context readahead algorithm · 10be0b37
      由 Wu Fengguang 提交于 
      Introduce page cache context based readahead algorithm.
This is to better support concurrent read streams in general.

RATIONALE
---------
The current readahead algorithm detects interleaved reads in a _passive_ way.
Given a sequence of interleaved streams 1,1001,2,1002,3,4,1003,5,1004,1005,6,...
By checking for (offset == prev_offset + 1), it will discover the sequentialness
between 3,4 and between 1004,1005, and start doing sequential readahead for the
individual streams since page 4 and page 1005.

The context readahead algorithm guarantees to discover the sequentialness no
matter how the streams are interleaved. For the above example, it will start
sequential readahead since page 2 and 1002.

The trick is to poke for page @offset-1 in the page cache when it has no other
clues on the sequentialness of request @offset: if the current requenst belongs
to a sequential stream, that stream must have accessed page @offset-1 recently,
and the page will still be cached now. So if page @offset-1 is there, we can
take request @offset as a sequential access.

BENEFICIARIES
-------------
- strictly interleaved reads  i.e. 1,1001,2,1002,3,1003,...
  the current readahead will take them as silly random reads;
  the context readahead will take them as two sequential streams.

- cooperative IO processes   i.e. NFS and SCST
  They create a thread pool, farming off (sequential) IO requests to different
  threads which will be performing interleaved IO.

  It was not easy(or possible) to reliably tell from file->f_ra all those
  cooperative processes working on the same sequential stream, since they will
  have different file->f_ra instances. And NFSD's file->f_ra is particularly
  unusable, since their file objects are dynamically created for each request.
  The nfsd does have code trying to restore the f_ra bits, but not satisfactory.

  The new scheme is to detect the sequential pattern via looking up the page
  cache, which provides one single and consistent view of the pages recently
  accessed. That makes sequential detection for cooperative processes possible.

USER REPORT
-----------
Vladislav recommends the addition of context readahead as a result of his SCST
benchmarks. It leads to 6%~40% performance gains in various cases and achieves
equal performance in others.                http://lkml.org/lkml/2009/3/19/239

OVERHEADS
---------
In theory, it introduces one extra page cache lookup per random read.  However
the below benchmark shows context readahead to be slightly faster, wondering..

Randomly reading 200MB amount of data on a sparse file, repeat 20 times for
each block size. The average throughputs are:

                       	original ra	context ra	gain
 4K random reads:	 65.561MB/s	 65.648MB/s	+0.1%
16K random reads:	124.767MB/s	124.951MB/s	+0.1%
64K random reads: 	162.123MB/s	162.278MB/s	+0.1%

Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Tested-by: NVladislav Bolkhovitin <vst@vlnb.net>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      10be0b37
    • W
      readahead: move the random read case to bottom · 045a2529
      由 Wu Fengguang 提交于 
      Split all readahead cases, and move the random one to bottom.

No behavior changes.

This is to prepare for the introduction of context readahead, and make it
easy for inserting accounting/tracing points for each case.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Vladislav Bolkhovitin <vst@vlnb.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      045a2529
    • W
      radix-tree: add radix_tree_prev_hole() · dc566127
      由 Wu Fengguang 提交于 
      The counterpart of radix_tree_next_hole(). To be used by context readahead.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Vladislav Bolkhovitin <vst@vlnb.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dc566127
    • W
      readahead: record mmap read-around states in file_ra_state · d30a1100
      由 Wu Fengguang 提交于 
      Mmap read-around now shares the same code style and data structure with
readahead code.

This also removes do_page_cache_readahead().  Its last user, mmap
read-around, has been changed to call ra_submit().

The no-readahead-if-congested logic is dumped by the way.  Users will be
pretty sensitive about the slow loading of executables.  So it's
unfavorable to disabled mmap read-around on a congested queue.

[akpm@linux-foundation.org: coding-style fixes]
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d30a1100
    • W
      readahead: enforce full readahead size on async mmap readahead · 2fad6f5d
      由 Wu Fengguang 提交于 
      We need this in one particular case and two more general ones.

Now we do async readahead for sequential mmap reads, and do it with the
help of PG_readahead.  For normal reads, PG_readahead is the sufficient
condition to do a sequential readahead.  But unfortunately, for mmap
reads, there is a tiny nuisance:

[11736.998347] readahead-init0(process: sh/23926, file: sda1/w3m, offset=0:4503599627370495, ra=0+4-3) = 4
[11737.014985] readahead-around(process: w3m/23926, file: sda1/w3m, offset=0:0, ra=290+32-0) = 17
[11737.019488] readahead-around(process: w3m/23926, file: sda1/w3m, offset=0:0, ra=118+32-0) = 32
[11737.024921] readahead-interleaved(process: w3m/23926, file: sda1/w3m, offset=0:2, ra=4+6-6) = 6
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~                                                 ~~~~~~~~~~~~~

An unfavorably small readahead.  The original dumb read-around size could
be more efficient.

That happened because ld-linux.so does a read(832) in L1 before mmap(),
which triggers a 4-page readahead, with the second page tagged
PG_readahead.

L0: open("/lib/libc.so.6", O_RDONLY)        = 3
L1: read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\342"..., 832) = 832
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L2: fstat(3, {st_mode=S_IFREG|0755, st_size=1420624, ...}) = 0
L3: mmap(NULL, 3527256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fac6e51d000
L4: mprotect(0x7fac6e671000, 2097152, PROT_NONE) = 0
L5: mmap(0x7fac6e871000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x154000) = 0x7fac6e871000
L6: mmap(0x7fac6e876000, 16984, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fac6e876000
L7: close(3)                                = 0

In general, the PG_readahead flag will also be hit in cases

- sequential reads

- clustered random reads

A full readahead size is desirable in both cases.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2fad6f5d
    • W
      readahead: sequential mmap readahead · 70ac23cf
      由 Wu Fengguang 提交于 
      Auto-detect sequential mmap reads and do readahead for them.

The sequential mmap readahead will be triggered when
- sync readahead: it's a major fault and (prev_offset == offset-1);
- async readahead: minor fault on PG_readahead page with valid readahead state.

The benefits of doing readahead instead of read-around:
- less I/O wait thanks to async readahead
- double real I/O size and no more cache hits

The single stream case is improved a little.
For 100,000 sequential mmap reads:

                                    user       system    cpu        total
(1-1)  plain -mm, 128KB readaround: 3.224      2.554     48.40%     11.838
(1-2)  plain -mm, 256KB readaround: 3.170      2.392     46.20%     11.976
(2)  patched -mm, 128KB readahead:  3.117      2.448     47.33%     11.607

The patched (2) has smallest total time, since it has no cache hit overheads
and less I/O block time(thanks to async readahead). Here the I/O size
makes no much difference, since there's only one single stream.

Note that (1-1)'s real I/O size is 64KB and (1-2)'s real I/O size is 128KB,
since the half of the read-around pages will be readahead cache hits.

This is going to make _real_ differences for _concurrent_ IO streams.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      70ac23cf
    • L
      readahead: clean up and simplify the code for filemap page fault readahead · ef00e08e
      由 Linus Torvalds 提交于 
      This shouldn't really change behavior all that much, but the single rather
complex function with read-ahead inside a loop etc is broken up into more
manageable pieces.

The behaviour is also less subtle, with the read-ahead being done up-front
rather than inside some subtle loop and thus avoiding the now unnecessary
extra state variables (ie "did_readaround" is gone).

Fengguang: the code split in fact fixed a bug reported by Pavel Levshin:
the PGMAJFAULT accounting used to be bypassed when MADV_RANDOM is set, in
which case the original code will directly jump to no_cached_page reading.

Cc: Pavel Levshin <lpk@581.spb.su>
Cc: <wli@movementarian.org>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ef00e08e
    • W
      readahead: remove sync/async readahead call dependency · 51daa88e
      由 Wu Fengguang 提交于 
      The readahead call scheme is error-prone in that it expects the call sites
to check for async readahead after doing a sync one.  I.e.

			if (!page)
				page_cache_sync_readahead();
			page = find_get_page();
			if (page && PageReadahead(page))
				page_cache_async_readahead();

This is because PG_readahead could be set by a sync readahead for the
_current_ newly faulted in page, and the readahead code simply expects one
more callback on the same page to start the async readahead.  If the
caller fails to do so, it will miss the PG_readahead bits and never able
to start an async readahead.

Eliminate this insane constraint by piggy-backing the async part into the
current readahead window.

Now if an async readahead should be started immediately after a sync one,
the readahead logic itself will do it.  So the following code becomes
valid: (the 'else' in particular)

			if (!page)
				page_cache_sync_readahead();
			else if (PageReadahead(page))
				page_cache_async_readahead();

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      51daa88e
    • W
      readahead: increase interleaved readahead size · 160334a0
      由 Wu Fengguang 提交于 
      Make sure interleaved readahead size is larger than request size.  This
also makes the readahead window grow up more quickly.
Reported-by: NXu Chenfeng <xcf@ustc.edu.cn>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      160334a0
    • W
      readahead: remove one unnecessary radix tree lookup · caca7cb7
      由 Wu Fengguang 提交于 
      (hit_readahead_marker != 0) means the page at @offset is present, so we
can search for non-present page starting from @offset+1.
Reported-by: NXu Chenfeng <xcf@ustc.edu.cn>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      caca7cb7
    • W
      readahead: apply max_sane_readahead() limit in ondemand_readahead() · fc31d16a
      由 Wu Fengguang 提交于 
      Just in case someone aggressively sets a huge readahead size.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fc31d16a
    • W
      readahead: move max_sane_readahead() calls into force_page_cache_readahead() · f7e839dd
      由 Wu Fengguang 提交于 
      Impact: code simplification.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f7e839dd
    • W
      readahead: make mmap_miss an unsigned int · 1ebf26a9
      由 Wu Fengguang 提交于 
      This makes the performance impact of possible mmap_miss wrap around to be
temporary and tolerable: i.e.  MMAP_LOTSAMISS=100 extra readarounds.

Otherwise if ever mmap_miss wraps around to negative, it takes INT_MAX
cache misses to bring it back to normal state.  During the time mmap
readaround will be _enabled_ for whatever wild random workload.  That's
almost permanent performance impact.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1ebf26a9
    • A
      mm: consolidate init_mm definition · bb1f17b0
      由 Alexey Dobriyan 提交于 
      * create mm/init-mm.c, move init_mm there
* remove INIT_MM, initialize init_mm with C99 initializer
* unexport init_mm on all arches:

  init_mm is already unexported on x86.

  One strange place is some OMAP driver (drivers/video/omap/) which
  won't build modular, but it's already wants get_vm_area() export.
  Somebody should look there.

[akpm@linux-foundation.org: add missing #includes]
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bb1f17b0
    • Y
      firmware_map: fix hang with x86/32bit · 3b0fde0f
      由 Yinghai Lu 提交于 
      Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13484

Peer reported:
| The bug is introduced from kernel 2.6.27, if E820 table reserve the memory
| above 4G in 32bit OS(BIOS-e820: 00000000fff80000 - 0000000120000000
| (reserved)), system will report Int 6 error and hang up. The bug is caused by
| the following code in drivers/firmware/memmap.c, the resource_size_t is 32bit
| variable in 32bit OS, the BUG_ON() will be invoked to result in the Int 6
| error. I try the latest 32bit Ubuntu and Fedora distributions, all hit this
| bug.
|======
|static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
|                  const char *type,
|                  struct firmware_map_entry *entry)

and it only happen with CONFIG_PHYS_ADDR_T_64BIT is not set.

it turns out we need to pass u64 instead of resource_size_t for that.

[akpm@linux-foundation.org: add comment]
Reported-and-tested-by: NPeer Chen <pchen@nvidia.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3b0fde0f
    • R
      spi: takes size of a pointer to determine the size of the pointed-to type · 02141546
      由 Roel Kluin 提交于 
      Do not take the size of a pointer to determine the size of the pointed-to
type.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      02141546
    • A
      time: move PIT_TICK_RATE to linux/timex.h · 08604bd9
      由 Arnd Bergmann 提交于 
      PIT_TICK_RATE is currently defined in four architectures, but in three
different places.  While linux/timex.h is not the perfect place for it, it
is still a reasonable replacement for those drivers that traditionally use
asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency.

Note that for Alpha, the actual value changed from 1193182UL to 1193180UL.
 This is unlikely to make a difference, and probably can only improve
accuracy.  There was a discussion on the correct value of CLOCK_TICK_RATE
a few years ago, after which every existing instance was getting changed
to 1193182.  According to the specification, it should be
1193181.818181...
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      08604bd9
  3. 16 6月, 2009 10 次提交
  5. 15 6月, 2009 9 次提交