Move a couple of MPIC smp routines into mpic.c, they're inside an SMP
block in mpic.c - so they're still only built for SMP.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Move all the pseries kexec code into one file, platforms/pseries/kexec.c
Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't
have to have #ifdef CONFIG_KEXEC in setup.c

Move the initialisation of the ppc_md kexec callbacks into an init routine.
This is well and truly early enough to cause no change in behaviour, we
can't kexec until userspace has given us a kernel to kexec into.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Move some extern declarations from setup.c into the new pseries.h.
While we're at it, provide dummy implementations for !SMP, to avoid
cluttering the C file with more #ifdefs.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Following the example of platforms/pasemi, consolidate a couple of
tiny header files in platforms/pseries into pseries.h.

This gives us a convenient place to put things that need to be
available to the platform code, but not public. And hopefully will
help people resist the temptation of sticking externs in C files.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Eliminate needless invocation of the SYNC macro (which always evaluates to
nothing on BookE) from head_fsl_booke.S (for both arch/ppc & arch/powerpc).
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The code was setting up the debug bus for group 21 when profiling on the
event PPU CYCLES.  The debug bus is not actually used by the hardware
performance counters when counting PPU CYCLES.  Setting up the debug bus
for PPU CYCLES causes signal routing conflicts on the debug bus when
profiling PPU cycles and another PPU event.  This patch fixes the code to
only setup the debug bus to route the performance signals for the non
PPU CYCLE events.
Signed-off-by: NMaynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: NCarl Love <carll@us.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This is a clean up patch that includes the following changes:

 -Some comments were added to clarify the code based on feedback
  from the community.
 -The write_pm_cntrl() and set_count_mode() were passed a
  structure element from a global variable.  The argument was
  removed so the functions now just operate on the global directly.
 -The set_pm_event() function call in the cell_virtual_cntr()
  routine was moved to a for-loop before the for_each_cpu loop
Signed-off-by: NCarl Love <carll@us.ibm.com>
Signed-off-by: NMaynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

I found an exploit in current kernel.
Currently, there is no range check about mmapping "/mem" node in
spufs. Thus, an application can access privilege memory region.

In case this kernel already worked on a public server, I send this
information only here.
If there are such servers in somewhere, please replace it, ASAP.
Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

For SCHED_RR tasks we can do some really trivial timeslicing.  Basically
we fire up a time for every scheduler tick that searches for a higher
or same priority thread that is on the runqueue and if there is one
context switches to it.  Because we can't lock spus from timer context
we actually run this from a delayed runqueue instead of a timer.

A nice optimization would be to skip the actual priority bitmap search
when there are less contexts than physical spus available.  To implement
this I need a so far unpublished patch from Andre, and it will be added
after we have that patch in.

Note that right now we only do the time slicing for SCHED_RR tasks.
The code would work for SCHED_OTHER tasks aswell, but their prio
value is defered from the one the PPU thread has at time of spu_run,
and using this for spu scheduling decisions would make the code very
unfair.  SCHED_OTHER support will be enabled once we the spu scheduler
knows how to calculcate cpu_context.prio (very soon)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

use DECLARE_BITMAP in the spu scheduler instead of reimplementing it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

If we start a spu context with realtime priority we want it to run
immediately and not wait until some other lower priority thread has
finished.  Try to find a suitable victim and use it's spu in this
case.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Give spu_yield a kerneldoc comment and remove the old comment
documenting spu_activate, spu_deactive and spu_yield as all of them
now have descriptive kerneldoc comments of their own.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

If we call spu_remove_from_active_list that spu is always guaranteed
to be on the active list and in runnable state, so we can simply
do a list_del to remove it and unconditionally take the was_active
codepath.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

There is no need to directly wake up contexts in spu_activate when
called from spu_run, so add a flag to surpress this wakeup.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This is the biggest patch in this series, and it reworks the guts of
the spu scheduler runqueue mechanism:

 - instead of embedding a waitqueue in the runqueue there is now a
   simple doubly-linked list, the actual wakeups happen by reusing
   the stop_wq in the spu context (maybe we should rename it one day)
 - spu_free and spu_prio_wakeup are merged into a single spu_reschedule
   function
 - various functionality is split out into small helpers, and kerneldoc
   comments are added in various places to document what's going on.
 - spu_activate is rewritten into a tight loop by removing test for
   various impossible conditions and using the infrastructure in this
   patch.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

It doesn't make any sense to have a priority field in the physical spu
structure.  Move it into the spu context instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Various cleanups in code surrounding the state semaphore:

 - inline spu_acquire/spu_release
 - cleanup spu_acquire_* and add kerneldoc comments to these functions
 - remove spu_release_exclusive and replace it with spu_release
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The r/w semaphore to lock the spus was overkill and can be replaced
with a mutex to make it faster, simpler and easier to debug.  It also
helps to allow making most spufs interruptible in future patches.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Various cleanups to sched.c that don't change the global control flow:

 - add kerneldoc comments to various functions
 - add spu_ prefixes to various functions
 - add/remove context from the runqueue in bind/unbind_context as
   it's part of the logical operation
 - add a call to put_active_spu to spu_unbind_contex as it's logically
   part of the unbind operation
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Only bind_context/unbind_context change the spu context state.  Thus
we can move all assignents of SPU_STATE_RUNNABLE into bind_context,
which parallels the unbind side aswell.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

unbind_context already sets the context state to SPU_STATE_SAVED, thus
the spu_deactivate callers don't need to do it again.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Remove the empty last line in arch/powerpc/platforms/cell/spufs/run.c.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Remove the SPU_CONTEXT_PREEMPT define.  It's unused and won't be used
in this form after the scheduler rework.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This patch updates the defconfig for the MPC8349E-mITX.  In addition to picking
up changes from recent kernels, disables support for e100 (which doesn't ship
with the system), turns off input devices, turns on some I2C support, turns
off HW monitoring (HW not yet supported), turns off OHCI USB (not used), turns
off USB gadget support (HW not yet supported), turns on DOS FS support, and
turns off kernel debugging.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds a defconfig and a DTS for the MPC8349E-mITX-GP, a variant of
the MPC8349E-mITX.

USB is disabled because the only USB port is not setup properly by
firmware/kernel
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add defconfig for the MPC8568 MDS reference board
Signed-off-by: NAndrew Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add support for the MPC8568 MDS reference board
Signed-off-by: NAndrew Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

It looks like we've had some serious bitrot there mostly due to tracking
of address_space's of mmap'ed files getting out of sync with the actual
mmap code. The mfc, mss and psmap were not tracked properly and thus
not invalidated on context switches (oops !)

I also removed the various file->f_mapping = inode->i_mapping;
assignments that were done in the other open() routines since that
is already done for us by __dentry_open.

One improvement we might want to do later is to assign the various
ctx-> fields at mmap time instead of file open/close time so that we
don't call unmap_mapping_range() on thing that have not been mmap'ed

Finally, I added some smp_wmb's after assigning the ctx-> fields to make
sure they are visible to other CPUs. I don't think this is really
necessary as I suspect locking in the fs layer will make that happen
anyway but better safe than sorry.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Struct page are no longer needed for SPUs, so let's not create them
on PS3 anymore.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch removes the need for struct page for SPE local store
and registers from spufs. It also makes the locking much more
obvious and no longer relying on the truncate logic black magic
for protecting against races between unmap_mapping_range() and
new pages faulted in. It does so by switching to a nopfn() handler
and using the new vm_insert_pfn() to setup the PTEs itself while
holding a lock on the SPE.

The nice thing is that this patch actually removes a lot more code
than it adds :-)
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The efika platform used three files efika-pci.c efika-setup.c and
a 2 line efika.h to link the two. The total of code in those is
really not much and therefore, I think they're better merged
in a single file.

There is absolutely _no_code_change_ at all, just merged the files.
Signed-off-by: NSylvain Munaut <tnt@246tNt.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NSylvain Munaut <tnt@246tNt.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Now that the device tree has the good properties, we can
remove all the efika_init code by a single call to common code.

While we're modifying that file, a few whitespaces/alignement/typo
fixes are made (nothing significant).
Signed-off-by: NSylvain Munaut <tnt@246tNt.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>