- 05 1月, 2012 1 次提交
-
-
由 Russell King 提交于
Hook these platforms restart code into the new restart hook rather than using arch_reset(). In addition, convert calls to arm_machine_restart() to orion5x_restart() to ensure that they continue to work as intended. Acked-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 10月, 2011 2 次提交
-
-
由 Russell King 提交于
Get rid of the mdesc pointer in the fixup function call. No one uses the mdesc pointer, it shouldn't be modified anyway, and we can't wrap it, so let's remove it. Platform files found by: $ regexp=$(git grep -h '\.fixup.*=' arch/arm | sed 's!.*= *\([^,]*\),* *!\1!' | sort -u | tr '\n' '|' | sed 's,|$,,;s,|,\\|,g') $ git grep $regexp arch/arm Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Sascha Hauer 提交于
Boards used to specify zreladdr in their Makefile.boot with zreladdr-y := x, so conflicting zreladdrs were silently overwritten. This patch changes this to zreladdr-y += x, so that we end up with multiple words in zreladdr in such a case. We can detect this later and complain if necessary. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 9月, 2011 2 次提交
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
由 Nicolas Pitre 提交于
Some platforms (like OMAP not to name it) are doing rather complicated hacks just to determine the base UART address to use. Let's give their addruart macro some slack by providing an extra work register which will allow for much needed cleanups. This is basically a no-op as this commit is only adding the extra argument to the macro but no one is using it yet. Signed-off-by: Nnicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: NKevin Hilman <khilman@ti.com>
-
- 11 9月, 2011 2 次提交
-
-
由 Brian Norris 提交于
Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Brian Norris 提交于
This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 25 8月, 2011 2 次提交
-
-
由 Bryan Wu 提交于
This patch fixed following building error: -- arch/arm/mach-orion5x/pci.c: In function 'orion5x_pci_sys_setup': arch/arm/mach-orion5x/pci.c:563:2: error: 'vga_base' undeclared (first use in this function) arch/arm/mach-orion5x/pci.c:563:2: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [arch/arm/mach-orion5x/pci.o] Error 1 make[1]: *** Waiting for unfinished jobs.... -- Signed-off-by: NBryan Wu <bryan.wu@canonical.com> Acked-by: NRob Herring <rob.herring@calxeda.com>
-
由 Paul Gortmaker 提交于
Upstream commit d5341942 "PCI: Make the struct pci_dev * argument of pci_fixup_irqs const." leaked an extra "const" into an actual call site (vs a proto/decl) which causes this: arch/arm/mach-orion5x/dns323-setup.c: In function 'dns323_pci_map_irq': arch/arm/mach-orion5x/dns323-setup.c:80: error: expected expression before 'const' arch/arm/mach-orion5x/dns323-setup.c:80: error: too few arguments to function 'orion5x_pci_map_irq' make[3]: *** [arch/arm/mach-orion5x/dns323-setup.o] Error 1 Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NNicolas Pitre <nico@fluxnic.net> Acked-by: NRalf Baechle <ralf@linux-mips.org>
-
- 22 8月, 2011 1 次提交
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 08 8月, 2011 1 次提交
-
-
由 Russell King 提交于
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 7月, 2011 1 次提交
-
-
由 Ralf Baechle 提交于
Aside of the usual motivation for constification, this function has a history of being abused a hook for interrupt and other fixups so I turned this function const ages ago in the MIPS code but it should be done treewide. Due to function pointer passing in varous places a few other functions had to be constified as well. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> To: Anton Vorontsov <avorontsov@mvista.com> To: Chris Metcalf <cmetcalf@tilera.com> To: Colin Cross <ccross@android.com> Acked-by: N"David S. Miller" <davem@davemloft.net> To: Eric Miao <eric.y.miao@gmail.com> To: Erik Gilling <konkers@android.com> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> To: "H. Peter Anvin" <hpa@zytor.com> To: Imre Kaloz <kaloz@openwrt.org> To: Ingo Molnar <mingo@redhat.com> To: Ivan Kokshaysky <ink@jurassic.park.msu.ru> To: Jesse Barnes <jbarnes@virtuousgeek.org> To: Krzysztof Halasa <khc@pm.waw.pl> To: Lennert Buytenhek <kernel@wantstofly.org> To: Matt Turner <mattst88@gmail.com> To: Nicolas Pitre <nico@fluxnic.net> To: Olof Johansson <olof@lixom.net> Acked-by: NPaul Mundt <lethal@linux-sh.org> To: Richard Henderson <rth@twiddle.net> To: Russell King <linux@arm.linux.org.uk> To: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-pci@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: x86@kernel.org Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 19 7月, 2011 1 次提交
-
-
由 Imre Kaloz 提交于
During the refactoring of the Orion MPP code, the detection for the 5181l as been used to select the 5181 MPP mask, which is wrong. Select the 5181 mask for all 5181 variants. Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
- 13 7月, 2011 3 次提交
-
-
由 Rob Herring 提交于
Convert the incorrectly named PCIMEM_BASE to a variable called vga_base. This removes the dependency on mach/hardware.h. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rob Herring 提交于
Convert PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM to variables to allow multi-platform builds. This also removes the requirement for a platform to have a mach/hardware.h. The default values for i/o and mem are 0x1000 and 0x01000000, respectively. Per Arnd Bergmann, other values are likely to be incorrect, but this commit does not try to address that issue. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rob Herring 提交于
Convert pcibios_assign_all_busses from a define to inline so platforms can control this setting. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: NArnd Bergmann <arnd@arndb.de>
-
- 17 5月, 2011 11 次提交
-
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
This change removes the interrupt resource. The driver does not use it. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Andrew Lunn 提交于
Changing eg 0xffffffff to DMA_BIT_MASK(32) etc allows easier side by side comparision of identical code which can be consolidated. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 29 3月, 2011 1 次提交
-
-
由 Thomas Gleixner 提交于
Convert to the new function names. Automated with coccinelle. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 06 3月, 2011 3 次提交
-
-
由 Alexander Clouter 提交于
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Alexander Clouter 提交于
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk> [np: used min_t() as suggested by Sergei Shtylyov <sshtylyov@mvista.com>] Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Alexander Clouter 提交于
Originally the FPGA ID checking switch statement left disabled all the TS implemented FPGA devices if the ID was unknown to it. Michael Spang created a fix in f9b1184e that changed the default to enable the devices in the event TS silently release more revisions into the wild, this unfortunately breaks custom FPGA bitstreams. This patch amends the switch statement so that the TS devices are only enabled if on the revision number is unknown (whilst the magic matches). Changelog: v2: neater implementation and some cosmetic changes v1: initial release <20110305112937.GA22117@chipmunk> Signed-off-by: NAlexander Clouter <alex@digriz.org.uk> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
- 05 3月, 2011 1 次提交
-
-
由 Michael Spang 提交于
When the manufacturer increases the revision number the platform devices for the RTC, NAND, and RNG disappear. We should assume new revisions have these devices instead of assuming they do not. Signed-off-by: NMichael Spang <mspang@csclub.uwaterloo.ca> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
- 04 3月, 2011 4 次提交
-
-
由 Lennert Buytenhek 提交于
This patch makes the various mach dirs that use the plat-orion GPIO code pass in GPIO-related platform info (GPIO controller base address, secondary base IRQ number, etc) explicitly, instead of having plat-orion get those values by including a mach dir include file -- the latter mechanism is problematic if you want to support multiple ARM platforms in the same kernel image. Signed-off-by: NLennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Lennert Buytenhek 提交于
This patch makes the various mach dirs that use the plat-orion time code pass in timer and bridge addresses explicitly, instead of having plat-orion get those values by including a mach dir include file -- the latter mechanism is problematic if you want to support multiple ARM platforms in the same kernel image. Signed-off-by: NLennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Alexander Clouter 提交于
New FPGA revisions have been released and seen in the wild on the platform, so it's time to update the list. Signed-off-by: NAlexander Clouter <alex@digriz.org.uk> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 Alexander Clouter 提交于
The NAND supports 32bit reads and writes so lets stop shunting 8bit chunks across the bus. Doing a dumb 'dd' benchmark, this increases performance roughly like so: * read: 1.3MB/s to 3.4MB/s * write: 614kB/s to 882kB/s Signed-off-by: NAlexander Clouter <alex@digriz.org.uk> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
- 18 2月, 2011 1 次提交
-
-
由 Russell King 提交于
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@st.com> Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NMagnus Damm <damm@opensource.se> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NWan ZongShun <mcuos.com@gmail.com> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Acked-by: NEric Miao <eric.y.miao@gmail.com> Acked-by: NJiandong Zheng <jdzheng@broadcom.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 12月, 2010 2 次提交
-
-
由 Russell King 提交于
Defining iounmap() with arguments prevents it from being used as a function pointer, causing platforms to work around this. Instead, define it to be a simple macro. Do the same for __arch_io(re|un)map too. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ash Hughes 提交于
Adds support for Buffalo Linkstation Live v3 (LS-CHL) NAS drives. Signed-off-by: NAsh Hughes <ashley.hughes@blueyonder.co.uk> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-