- 17 6月, 2007 21 次提交
-
-
由 Jan Kara 提交于
We have to take care that when we call udf_discard_prealloc() from udf_clear_inode() we have to write inode ourselves afterwards (otherwise, some changes might be lost leading to leakage of blocks, use of free blocks or improperly aligned extents). Also udf_discard_prealloc() does two different things - it removes preallocated blocks and truncates the last extent to exactly match i_size. We move the latter functionality to udf_truncate_tail_extent(), call udf_discard_prealloc() when last reference to a file is dropped and call udf_truncate_tail_extent() when inode is being removed from inode cache (udf_clear_inode() call). We cannot call udf_truncate_tail_extent() earlier as subsequent open+write would find the last block of the file mapped and happily write to the end of it, although the last extent says it's shorter. [akpm@linux-foundation.org: Make checkpatch.pl happier] Signed-off-by: NJan Kara <jack@suse.cz> Cc: Eric Sandeen <sandeen@sandeen.net> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
If ARCH_KMALLOC_MINALIGN is set to a value greater than 8 (SLUBs smallest kmalloc cache) then SLUB may generate duplicate slabs in sysfs (yes again) because the object size is padded to reach ARCH_KMALLOC_MINALIGN. Thus the size of the small slabs is all the same. No arch sets ARCH_KMALLOC_MINALIGN larger than 8 though except mips which for some reason wants a 128 byte alignment. This patch increases the size of the smallest cache if ARCH_KMALLOC_MINALIGN is greater than 8. In that case more and more of the smallest caches are disabled. If we do that then the count of the active general caches that is displayed on boot is not correct anymore since we may skip elements of the kmalloc array. So count them separately. This approach was tested by Havard yesterday. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Benjamin Herrenschmidt 提交于
Some changes done a while ago to avoid pounding on ptep_set_access_flags and update_mmu_cache in some race situations break sun4c which requires update_mmu_cache() to always be called on minor faults. This patch reworks ptep_set_access_flags() semantics, implementations and callers so that it's now responsible for returning whether an update is necessary or not (basically whether the PTE actually changed). This allow fixing the sparc implementation to always return 1 on sun4c. [akpm@linux-foundation.org: fixes, cleanups] Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: David Miller <davem@davemloft.net> Cc: Mark Fortescue <mark@mtfhpc.demon.co.uk> Acked-by: NWilliam Lee Irwin III <wli@holomorphy.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Mackall 提交于
(As reported by linux@horizon.com) Folding is done to minimize the theoretical possibility of systematic weakness in the particular bits of the SHA1 hash output. The result of this bug is that 16 out of 80 bits are un-folded. Without a major new vulnerability being found in SHA1, this is harmless, but still worth fixing. Signed-off-by: NMatt Mackall <mpm@selenic.com> Cc: <linux@horizon.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
The x86_64 a.out.h got a definition of STACK_TOP_MAX, which interferes with the UML version. So, just undef it like STACK_TOP. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Distros seem to be removing PAGE_SIZE from asm/page.h. So, the libc side of UML should stop using it. I replace it with UM_KERN_PAGE_SIZE, which is defined to be the same as PAGE_SIZE on the kernel side of the house. I could also use getpagesize(), but it's more important that UML have the same value of PAGE_SIZE everywhere. It's conceivable that it could be built with a larger PAGE_SIZE, and use of getpagesize() would break that badly. PAGE_MASK got the same treatment, as it is closely tied to PAGE_SIZE. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Update two points in the SPI interface documentation: - Update description of the "chip stays selected after message ends" mode. In some cases it's required for correctness; it isn't just a performance tweak. (Yes: to use this mode on mult-device busses, another programming interface will be needed. One draft has been circulated already.) - Clarify spi_setup(), highlighting that callers must ensure that no requests are queued (can't change configuration except between I/Os), and that the device must be deselected when this returns (which is a key part of why it's called during device init). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Accetta 提交于
If raid1/repair (which reads all block and fixes any differences it finds) hits a read error, it doesn't reset the bio for writing before writing correct data back, so the read error isn't fixed, and the device probably gets a zero-length write which it might complain about. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
1/ When resyncing a degraded raid10 which has more than 2 copies of each block, garbage can get synced on top of good data. 2/ We round the wrong way in part of the device size calculation, which can cause confusion. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
fs/fuse/inode.c:658:3: error: Initializer entry defined twice fs/fuse/inode.c:661:3: also defined here Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Björn Steinbrink 提交于
Fix oops triggered during: echo 0 > /proc/sys/kernel/nmi_watchdog The culprit seems to be 09198e68: [PATCH] i386: Clean up NMI watchdog code In two places, the parameters to release_{evntsel,perfctr}_nmi got interchanged during the cleanup. Fix interchanged parameters to release_{evntsel,perfctr}_nmi. Signed-off-by: NBjörn Steinbrink <B.Steinbrink@gmx.de> Cc: Stephane Eranian <eranian@hpl.hp.com> Cc: Andi Kleen <ak@suse.de> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Fix oops caused by 'cat /dev/snapshot', reported by Arkadiusz Miskiewicz, and make it impossible to thaw tasks with the help of the swsusp userland interface while there is a snapshot image ready to save. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix section error (allyesconfig). The exit function is called from init, so functions that are called by the exit function cannot be marked __exit. WARNING: drivers/built-in.o(.text+0xe5bc6): Section mismatch: reference to .exit. text: (between 'toshiba_acpi_exit' and 'hci_raw') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Jackson 提交于
The cpuset code to present a list of tasks using a cpuset to user space could write to an array that it had kmalloc'd, after a kmalloc request of zero size. The problem was that the code didn't check for writes past the allocated end of the array until -after- the first write. This is a race condition that is likely rare -- it would only show up if a cpuset went from being empty to having a task in it, during the brief time between the allocation and the first write. Prior to roughly 2.6.22 kernels, this was also a benign problem, because a zero kmalloc returned a few usable bytes anyway, and no harm was done with the bogus write. With the 2.6.22 kernel changes to make issue a warning if code tries to write to the location returned from a zero size allocation, this problem is no longer benign. This cpuset code would occassionally trigger that warning. The fix is trivial -- check before storing into the array, not after, whether the array is big enough to hold the store. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
It is not safe to use pte_update_defer() in ptep_test_and_clear_young(): its only user, /proc/<pid>/clear_refs, drops pte lock before flushing TLB. Use the safe though less efficient pte_update() paravirtop in its place. Likewise in ptep_test_and_clear_dirty(), though that has no current use. These are macros (header file dependency stops them from becoming inline functions), so be more liberal with the underscores and parentheses. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Zachary Amsden <zach@vmware.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Badari Pulavarty 提交于
shmid used to be stored as inode# for shared memory segments. Some of the proc-ps tools use this from /proc/pid/maps. Recent cleanups to newseg() changed it. This patch sets inode number back to shared memory id to fix breakage. Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Cc: "Albert Cahalan" <acahalan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
The data structure to manage the information gathered about functions allocating and freeing objects is allocated when the list_lock has already been taken. We need to allocate with GFP_ATOMIC instead of GFP_KERNEL. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Björn Steinbrink 提交于
When disabled through /proc/sys/kernel/nmi_watchdog, the NMI watchdog uses the stop() method directly, which does not decrement the activity counter, leading to a BUG(). Use the wrapper function instead to fix that. Signed-off-by: NBjörn Steinbrink <B.Steinbrink@gmx.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Björn Steinbrink 提交于
At system boot time, the NMI watchdog no longer reserved its MSRs, allowing other subsystems to mess with them. Fix that. Signed-off-by: NBjörn Steinbrink <B.Steinbrink@gmx.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Fulghum 提交于
Restore tty locked ioctl handler which was replaced with an unlocked ioctl handler in hung_up_tty_fops by the patch: commit e10cc1df Author: Paul Fulghum <paulkf@microgate.com> Date: Thu May 10 22:22:50 2007 -0700 tty: add compat_ioctl This was reported in: [Bug 8473] New: Oops: 0010 [1] SMP The bug is caused by switching to hung_up_tty_fops in do_tty_hangup. An ioctl call can be waiting on BLK after testing for existence of the locked ioctl handler in the normal tty fops, but before calling the locked ioctl handler. If a hangup occurs at that point, the locked ioctl fop is NULL and an oops occurs. (akpm: we can remove my debugging code from do_ioctl() now, but it'll be OK to do that for 2.6.23) Signed-off-by: NPaul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Woodhouse 提交于
Commit 9b01bd5b introduced a compat_ioctl handler for RADEON_SETPARAM, the sole purpose of which was to handle the fact that on i386, alignof(uint64_t)==4. Unfortunately, this handler was installed for _all_ 64-bit architectures, instead of only x86_64 and ia64. And thus it breaks 32-bit compatibility on every other arch, where 64-bit integers are aligned to 8 bytes in 32-bit mode just the same as in 64-bit mode. Arnd has a cunning plan to use 'compat_u64' with appropriate alignment attributes according to the 32-bit ABI, but for now let's just make the compat_radeon_cp_setparam routine entirely disappear on 64-bit machines whose 32-bit compat support isn't for i386. It would be a no-op with compat_u64 anyway. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 6月, 2007 14 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide-scsi: fix OOPS in idescsi_expiry() Resume from RAM on HPC nx6325 broken
-
drive->driver_data contains pointer to Scsi_Host not idescsi_scsi_t. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Rafael J. Wysocki 提交于
generic_ide_resume() should check if dev->driver is not NULL before applying to_ide_driver() to it. Fix that. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [RXRPC] net/rxrpc/ar-connection.c: fix NULL dereference [TCP]: Fix logic breakage due to DSACK separation [TCP]: Congestion control API RTT sampling fix
-
由 Paul Mundt 提交于
When building with memory hotplug enabled and cpu hotplug disabled, we end up with the following section mismatch: WARNING: mm/built-in.o(.text+0x4e58): Section mismatch: reference to .init.text: (between 'free_area_init_node' and '__build_all_zonelists') This happens as a result of: -> free_area_init_node() -> free_area_init_core() -> zone_pcp_init() <-- all __meminit up to this point -> zone_batchsize() <-- marked as __cpuinit fo This happens because CONFIG_HOTPLUG_CPU=n sets __cpuinit to __init, but CONFIG_MEMORY_HOTPLUG=y unsets __meminit. Changing zone_batchsize() to __devinit fixes this. __devinit is the only thing that is common between CONFIG_HOTPLUG_CPU=y and CONFIG_MEMORY_HOTPLUG=y. In the long run, perhaps this should be moved to another section identifier completely. Without this, memory hot-add of offline nodes (via hotadd_new_pgdat()) will oops if CPU hotplug is not also enabled. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> -- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits) Blackfin SMC91X ethernet supporting driver: SMC91C111 LEDs are note drived in the kernel like in uboot Blackfin SPI driver: fix bug SPI DMA incomplete transmission Blackfin SPI driver: tweak spi cleanup function to match newer kernel changes Blackfin RTC drivers: update MAINTAINERS information Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENB Blackfin serial driver: actually implement the break_ctl() function Blackfin serial driver: ignore framing and parity errors Blackfin serial driver: hook up our UARTs STP bit with userspaces CMSPAR Blackfin arch: move HI/LO macros into blackfin.h and punt the rest of macros.h as it includes VDSP macros we never use Blackfin arch: redo our linker script a bit Blackfin arch: make sure we initialize our L1 Data B section properly based on the linked kernel Blackfin arch: fix bug can not wakeup from sleep via push buttons Blackfin arch: add support for Alon Bar-Lev's dynamic kernel command-line Blackfin arch: add missing gpio.h header to fix compiling in some pm configurations Blackfin arch: As Mike pointed out range goes form m..MAX_BLACKFIN_GPIO -1 Blackfin arch: fix spelling typo in output Blackfin arch: try to split up functions like this into smaller units according to LKML review Blackfin arch: add proper ENDPROC() Blackfin arch: move more of our startup code to .init so it can be freed once we are up and running Blackfin arch: unify differences between our diff head.S files -- no functional changes ...
-
git://git.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block: splice: only check do_wakeup in splice_to_pipe() for a real pipe splice: fix leak of pages on short splice to pipe splice: adjust balance_dirty_pages_ratelimited() call
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: Prevent guest fpu state from leaking into the host
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix builds where MSC01E_xxx is undefined. [MIPS] Separate performance counter interrupts [MIPS] Malta: Fix for SOCitSC based Maltas
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32由 Linus Torvalds 提交于
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Define ARCH_KMALLOC_MINALIGN to L1_CACHE_BYTES [AVR32] STK1000: Set SPI_MODE_3 in the ltv350qv board info [AVR32] gpio_*_cansleep() fix [AVR32] ratelimit segfault reporting rate
-
由 Tejun Heo 提交于
SCSI marks internal commands with REQ_PREEMPT and push it at the front of the request queue using blk_execute_rq(). When entering suspended or frozen state, SCSI devices are quiesced using scsi_device_quiesce(). In quiesced state, only REQ_PREEMPT requests are processed. This is how SCSI blocks other requests out while suspending and resuming. As all internal commands are pushed at the front of the queue, this usually works. Unfortunately, this interacts badly with ordered requeueing. To preserve request order on requeueing (due to busy device, active EH or other failures), requests are sorted according to ordered sequence on requeue if IO barrier is in progress. The following sequence deadlocks. 1. IO barrier sequence issues. 2. Suspend requested. Queue is quiesced with part or all of IO barrier sequence at the front. 3. During suspending or resuming, SCSI issues internal command which gets deferred and requeued for some reason. As the command is issued after the IO barrier in #1, ordered requeueing code puts the request after IO barrier sequence. 4. The device is ready to process requests again but still is in quiesced state and the first request of the queue isn't REQ_PREEMPT, so command processing is deadlocked - suspending/resuming waits for the issued request to complete while the request can't be processed till device is put back into running state by resuming. This can be fixed by always putting !fs requests at the front when requeueing. The following thread reports this deadlock. http://thread.gmane.org/gmane.linux.kernel/537473Signed-off-by: NTejun Heo <htejun@gmail.com> Acked-by: NDavid Greaves <david@dgreaves.com> Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
This patch fixes a NULL dereference spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Commit 6f74651a is found guilty of breaking DSACK counting, which should be done only for the SACK block reported by the DSACK instead of every SACK block that is received along with DSACK information. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Commit 164891aa broke RTT sampling of congestion control modules. Inaccurate timestamps could be fed to them without providing any way for them to identify such cases. Previously RTT sampler was called only if FLAG_RETRANS_DATA_ACKED was not set filtering inaccurate timestamps nicely. In addition, the new behavior could give an invalid timestamp (zero) to RTT sampler if only skbs with TCPCB_RETRANS were ACKed. This solves both problems. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 6月, 2007 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix console output getting dropped on platforms without udbg_putc [POWERPC] Fix per-cpu allocation on oldworld SMP powermacs
-
由 Jens Axboe 提交于
We only ever set do_wakeup to non-zero if the pipe has an inode backing, so it's pointless to check outside the pipe->inode check. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
If the destination pipe is full and we already transferred data, we break out instead of waiting for more pipe room. The exit logic looks at spd->nr_pages to see if we moved everything inside the spd container, but we decrement that variable in the loop to decide when spd has emptied. Instead we want to compare to the original page count in the spd, so cache that in a local variable. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
As we have potentially dirtied more than 1 page, we should indicate as such to the dirty page balancing. So call balance_dirty_pages_ratelimited_nr() and pass in the approximate number of pages we dirtied. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Avi Kivity 提交于
The lazy fpu changes did not take into account that some vmexit handlers can sleep. Move loading the guest state into the inner loop so that it can be reloaded if necessary, and move loading the host state into vmx_vcpu_put() so it can be performed whenever we relinquish the vcpu. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-