- 11 9月, 2013 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device-mapper updates from Mike Snitzer: "Add the ability to collect I/O statistics on user-defined regions of a device-mapper device. This dm-stats code required the reintroduction of a div64_u64_rem() helper, but as a separate method that doesn't slow down div64_u64() -- especially on 32-bit systems. Allow the error target to replace request-based DM devices (e.g. multipath) in addition to bio-based DM devices. Various other small code fixes and improvements to thin-provisioning, DM cache and the DM ioctl interface" * tag 'dm-3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm stripe: silence a couple sparse warnings dm: add statistics support dm thin: always return -ENOSPC if no_free_space is set dm ioctl: cleanup error handling in table_load dm ioctl: increase granularity of type_lock when loading table dm ioctl: prevent rename to empty name or uuid dm thin: set pool read-only if breaking_sharing fails block allocation dm thin: prefix pool error messages with pool device name dm: allow error target to replace bio-based and request-based targets math64: New separate div64_u64_rem helper dm space map: optimise sm_ll_dec and sm_ll_inc dm btree: prefetch child nodes when walking tree for a dm_btree_del dm btree: use pop_frame in dm_btree_del to cleanup code dm cache: eliminate holes in cache structure dm cache: fix stacking of geometry limits dm thin: fix stacking of geometry limits dm thin: add data block size limits to Documentation dm cache: add data block size limits to code and Documentation dm cache: document metadata device is exclussive to a cache dm: stop using WQ_NON_REENTRANT
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md update from Neil Brown: "Headline item is multithreading for RAID5 so that more IO/sec can be supported on fast (SSD) devices. Also TILE-Gx SIMD suppor for RAID6 calculations and an assortment of bug fixes" * tag 'md/3.12' of git://neil.brown.name/md: raid5: only wakeup necessary threads md/raid5: flush out all pending requests before proceeding with reshape. md/raid5: use seqcount to protect access to shape in make_request. raid5: sysfs entry to control worker thread number raid5: offload stripe handle to workqueue raid5: fix stripe release order raid5: make release_stripe lockless md: avoid deadlock when dirty buffers during md_stop. md: Don't test all of mddev->flags at once. md: Fix apparent cut-and-paste error in super_90_validate raid6/test: replace echo -e with printf RAID: add tilegx SIMD implementation of raid6 md: fix safe_mode buglet. md: don't call md_allow_write in get_bitmap_file.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs pile 3 (of many) from Al Viro: "Waiman's conversion of d_path() and bits related to it, kern_path_mountpoint(), several cleanups and fixes (exportfs one is -stable fodder, IMO). There definitely will be more... ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: split read_seqretry_or_unlock(), convert d_walk() to resulting primitives dcache: Translating dentry into pathname without taking rename_lock autofs4 - fix device ioctl mount lookup introduce kern_path_mountpoint() rename user_path_umountat() to user_path_mountpoint_at() take unlazy_walk() into umount_lookup_last() Kill indirect include of file.h from eventfd.h, use fdget() in cgroup.c prune_super(): sb->s_op is never NULL exportfs: don't assume that ->iterate() won't feed us too long entries afs: get rid of redundant ->d_name.len checks
-
由 Linus Torvalds 提交于
When I moved the RCU walk termination into unlazy_walk(), I didn't copy quite all of it: for the successful RCU termination we properly add the necessary reference counts to our temporary copy of the root path, but for the failure case we need to make sure that any temporary root path information is cleared out (since it does _not_ have the proper reference counts from the RCU lookup). We could clean up this mess by just always dropping the temporary root information, but Al points out that that would mean that a single lookup through symlinks could see multiple different root entries if it races with another thread doing chroot. Not that I think we should really care (we had that before too, back before we had a copy of the root path in the nameidata). Al says he has a cunning plan. In the meantime, this is the minimal fix for the problem, even if it's not all that pretty. Reported-by: NMace Moneta <moneta.mace@gmail.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 9月, 2013 27 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine由 Linus Torvalds 提交于
Pull dmaengine update from Dan Williams: "Collection of random updates to the core and some end-driver fixups for ioatdma and mv_xor: - NUMA aware channel allocation - Cleanup dmatest debugfs interface - ioat: make raid-support Atom only - mv_xor: big endian Aside from the top three commits these have all had some soak time in -next. The top commit fixes a recent build breakage. It has been a long while since my last pull request, hopefully it does not show. Thanks to Vinod for keeping an eye on drivers/dma/ this past year" * tag 'dmaengine-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: dmaengine: dma_sync_wait and dma_find_channel undefined MAINTAINERS: update email for Dan Williams dma: mv_xor: Fix incorrect error path ioatdma: silence GCC warnings dmaengine: make dma_channel_rebalance() NUMA aware dmaengine: make dma_submit_error() return an error code ioatdma: disable RAID on non-Atom platforms and reenable unaligned copies mv_xor: support big endian systems using descriptor swap feature mv_xor: use {readl, writel}_relaxed instead of __raw_{readl, writel} dmatest: print message on debug level in case of no error dmatest: remove IS_ERR_OR_NULL checks of debugfs calls dmatest: make module parameters writable
-
由 Jon Mason 提交于
dma_sync_wait and dma_find_channel are declared regardless of whether CONFIG_DMA_ENGINE is enabled, but calling the function without CONFIG_DMA_ENGINE enabled results "undefined reference" errors. To get around this, declare dma_sync_wait and dma_find_channel as inline functions if CONFIG_DMA_ENGINE is undefined. Signed-off-by: NJon Mason <jon.mason@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late before the merge window, or had dependencies on previous branches. Highlights: - ux500: misc. cleanup, fixup I2C devices - exynos: DT updates for RTC; PM updates - at91: DT updates for NAND; new platforms added to generic defconfig - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks - highbank: LPAE fixes, select necessary ARM errata - omap: PM fixes and improvements; OMAP5 mailbox support - omap: basic support for new DRA7xx SoCs" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: dts: vexpress: Add CCI node to TC2 device-tree ARM: EXYNOS: Skip C1 cpuidle state for exynos5440 ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 ARM: highbank: clean-up some unused includes ARM: sun7i: Enable the A20 clocks in the DTSI ARM: sun6i: Enable clock support in the DTSI ARM: sun5i: dt: Use the A10s gates in the DTSI ARM: at91: at91_dt_defconfig: enable rm9200 support ARM: dts: add ADC device tree node for exynos5420/5250 ARM: dts: Add RTC DT node to Exynos5420 SoC ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC ARM: dts: Fix the RTC DT node name for Exynos5250 irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver ARM: OMAP: AM33xx: clock: Add RNG clock data ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX ARM: OMAP4: clock: Lock PLLs in the right sequence ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC driver update from Kevin Hilman: "This contains the ARM SoC related driver updates for v3.12. The only thing this cycle are core PM updates and CPUidle support for ARM's TC2 big.LITTLE development platform" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()
-
git://git.linaro.org/people/mturquette/linux由 Linus Torvalds 提交于
Pull clock framework changes from Michael Turquette: "The common clk framework changes for 3.12 are dominated by clock driver patches, both new drivers and fixes to existing. A high percentage of these are for Samsung platforms like Exynos. Core framework fixes and some new features like automagical clock re-parenting round out the patches" * tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linux: (102 commits) clk: only call get_parent if there is one clk: samsung: exynos5250: Simplify registration of PLL rate tables clk: samsung: exynos4: Register PLL rate tables for Exynos4x12 clk: samsung: exynos4: Register PLL rate tables for Exynos4210 clk: samsung: exynos4: Reorder registration of mout_vpllsrc clk: samsung: pll: Add support for rate configuration of PLL46xx clk: samsung: pll: Use new registration method for PLL46xx clk: samsung: pll: Add support for rate configuration of PLL45xx clk: samsung: pll: Use new registration method for PLL45xx clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_plls clk: samsung: exynos4: Remove checks for DT node clk: samsung: exynos4: Remove unused static clkdev aliases clk: samsung: Modify _get_rate() helper to use __clk_lookup() clk: samsung: exynos4: Use separate aliases for cpufreq related clocks clocksource: samsung_pwm_timer: Get clock from device tree ARM: dts: exynos4: Specify PWM clocks in PWM node pwm: samsung: Update DT bindings documentation to cover clocks clk: Move symbol export to proper location clk: fix new_parent dereference before null check clk: wm831x: Initialise wm831x pointer on init ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing updates from Steven Rostedt: "Not much changes for the 3.12 merge window. The major tracing changes are still in flux, and will have to wait for 3.13. The changes for 3.12 are mostly clean ups and minor fixes. H Peter Anvin added a check to x86_32 static function tracing that helps a small segment of the kernel community. Oleg Nesterov had a few changes from 3.11, but were mostly clean ups and not worth pushing in the -rc time frame. Li Zefan had small clean up with annotating a raw_init with __init. I fixed a slight race in updating function callbacks, but the race is so small and the bug that happens when it occurs is so minor it's not even worth pushing to stable. The only real enhancement is from Alexander Z Lam that made the tracing_cpumask work for trace buffer instances, instead of them all sharing a global cpumask" * tag 'trace-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/rcu: Do not trace debug_lockdep_rcu_enabled() x86-32, ftrace: Fix static ftrace when early microcode is enabled ftrace: Fix a slight race in modifying what function callback gets traced tracing: Make tracing_cpumask available for all instances tracing: Kill the !CONFIG_MODULES code in trace_events.c tracing: Don't pass file_operations array to event_create_dir() tracing: Kill trace_create_file_ops() and friends tracing/syscalls: Annotate raw_init function with __init
-
由 Alex Elder 提交于
In __clk_init(), after a clock is mostly initialized, a scan is done of the orphan clocks to see if the clock being registered is the parent of any of them. This code assumes that any clock that provides a get_parent method actually has at least one parent, and that's not a valid assumption. As a result, an orphan clock with no parent can return *something* as the parent index, and that value is blindly used to dereference the orphan's parent_names[] array (which will be ZERO_SIZE_PTR or NULL). Fix this by ensuring get_parent is only called for orphans with at least one parent. Signed-off-by: NAlex Elder <elder@linaro.org> Signed-off-by: NMike Turquette <mturquette@linaro.org>
-
由 Al Viro 提交于
Separate "check if we need to retry" from "unlock if we are done and had seq_writelock"; that allows to use these guys in d_walk(), where we need to recheck every time we ascend back to parent, but do *not* want to unlock until the very end. Lift rcu_read_lock/rcu_read_unlock out into callers. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
Pull xfs updates from Ben Myers: "For 3.12-rc1 there are a number of bugfixes in addition to work to ease usage of shared code between libxfs and the kernel, the rest of the work to enable project and group quotas to be used simultaneously, performance optimisations in the log and the CIL, directory entry file type support, fixes for log space reservations, some spelling/grammar cleanups, and the addition of user namespace support. - introduce readahead to log recovery - add directory entry file type support - fix a number of spelling errors in comments - introduce new Q_XGETQSTATV quotactl for project quotas - add USER_NS support - log space reservation rework - CIL optimisations - kernel/userspace libxfs rework" * tag 'xfs-for-linus-v3.12-rc1' of git://oss.sgi.com/xfs/xfs: (112 commits) xfs: XFS_MOUNT_QUOTA_ALL needed by userspace xfs: dtype changed xfs_dir2_sfe_put_ino to xfs_dir3_sfe_put_ino Fix wrong flag ASSERT in xfs_attr_shortform_getvalue xfs: finish removing IOP_* macros. xfs: inode log reservations are too small xfs: check correct status variable for xfs_inobt_get_rec() call xfs: inode buffers may not be valid during recovery readahead xfs: check LSN ordering for v5 superblocks during recovery xfs: btree block LSN escaping to disk uninitialised XFS: Assertion failed: first <= last && last < BBTOB(bp->b_length), file: fs/xfs/xfs_trans_buf.c, line: 568 xfs: fix bad dquot buffer size in log recovery readahead xfs: don't account buffer cancellation during log recovery readahead xfs: check for underflow in xfs_iformat_fork() xfs: xfs_dir3_sfe_put_ino can be static xfs: introduce object readahead to log recovery xfs: Simplify xfs_ail_min() with list_first_entry_or_null() xfs: Register hotcpu notifier after initialization xfs: add xfs sb v4 support for dirent filetype field xfs: Add write support for dirent filetype field xfs: Add read-only support for dirent filetype field ...
-
由 Olof Johansson 提交于
Not using the return value can in the generic case be racy, so it's in general good practice to check the return value instead. This also resolved the warning caused on ARM and other architectures: fs/direct-io.c: In function 'sb_init_dio_done_wq': fs/direct-io.c:557:2: warning: value computed is not used [-Wunused-value] Signed-off-by: NOlof Johansson <olof@lixom.net> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: H Peter Anvin <hpa@zytor.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Waiman Long 提交于
When running the AIM7's short workload, Linus' lockref patch eliminated most of the spinlock contention. However, there were still some left: 8.46% reaim [kernel.kallsyms] [k] _raw_spin_lock |--42.21%-- d_path | proc_pid_readlink | SyS_readlinkat | SyS_readlink | system_call | __GI___readlink | |--40.97%-- sys_getcwd | system_call | __getcwd The big one here is the rename_lock (seqlock) contention in d_path() and the getcwd system call. This patch will eliminate the need to take the rename_lock while translating dentries into the full pathnames. The need to take the rename_lock is to make sure that no rename operation can be ongoing while the translation is in progress. However, only one thread can take the rename_lock thus blocking all the other threads that need it even though the translation process won't make any change to the dentries. This patch will replace the writer's write_seqlock/write_sequnlock sequence of the rename_lock of the callers of the prepend_path() and __dentry_path() functions with the reader's read_seqbegin/read_seqretry sequence within these 2 functions. As a result, the code will have to retry if one or more rename operations had been performed. In addition, RCU read lock will be taken during the translation process to make sure that no dentries will go away. To prevent live-lock from happening, the code will switch back to take the rename_lock if read_seqretry() fails for three times. To further reduce spinlock contention, this patch does not take the dentry's d_lock when copying the filename from the dentries. Instead, it treats the name pointer and length as unreliable and just copy the string byte-by-byte over until it hits a null byte or the end of string as specified by the length. This should avoid stepping into invalid memory address. The error cases are left to be handled by the sequence number check. The following code re-factoring are also made: 1. Move prepend('/') into prepend_name() to remove one conditional check. 2. Move the global root check in prepend_path() back to the top of the while loop. With this patch, the _raw_spin_lock will now account for only 1.2% of the total CPU cycles for the short workload. This patch also has the effect of reducing the effect of running perf on its profile since the perf command itself can be a heavy user of the d_path() function depending on the complexity of the workload. When taking the perf profile of the high-systime workload, the amount of spinlock contention contributed by running perf without this patch was about 16%. With this patch, the spinlock contention caused by the running of perf will go away and we will have a more accurate perf profile. Signed-off-by: NWaiman Long <Waiman.Long@hp.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull mtd updates from David Woodhouse: - factor out common code from MTD tests - nand-gpio cleanup and portability to non-ARM - m25p80 support for 4-byte addressing chips, other new chips - pxa3xx cleanup and support for new platforms - remove obsolete alauda, octagon-5066 drivers - erase/write support for bcm47xxsflash - improve detection of ECC requirements for NAND, controller setup - NFC acceleration support for atmel-nand, read/write via SRAM - etc * tag 'for-linus-20130909' of git://git.infradead.org/linux-mtd: (184 commits) mtd: chips: Add support for PMC SPI Flash chips in m25p80.c mtd: ofpart: use for_each_child_of_node() macro mtd: mtdswap: replace strict_strtoul() with kstrtoul() mtd cs553x_nand: use kzalloc() instead of memset mtd: atmel_nand: fix error return code in atmel_nand_probe() mtd: bcm47xxsflash: writing support mtd: bcm47xxsflash: implement erasing support mtd: bcm47xxsflash: convert to module_platform_driver instead of init/exit mtd: bcm47xxsflash: convert kzalloc to avoid invalid access mtd: remove alauda driver mtd: nand: mxc_nand: mark 'const' properly mtd: maps: cfi_flagadm: add missing __iomem annotation mtd: spear_smi: add missing __iomem annotation mtd: r852: Staticize local symbols mtd: nandsim: Staticize local symbols mtd: impa7: add missing __iomem annotation mtd: sm_ftl: Staticize local symbols mtd: m25p80: add support for mr25h10 mtd: m25p80: make CONFIG_M25PXX_USE_FAST_READ safe to enable mtd: m25p80: Pass flags through CAT25_INFO macro ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394由 Linus Torvalds 提交于
Pull firewire updates from Stefan Richter: - Fix a regression since 3.2 inclusive: The subsystem workqueue deadlocked between transaction completion handling and bus reset handling if the worker pool could not be increased in time. - janitorial updates * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: Fix deadlock at bus reset firewire: ohci: Change module_pci_driver to module_init/module_exit firewire: ohci: beautify some macro definitions firewire: ohci: change confusing name of a struct member firewire: core: typecast from gfp_t to bool more safely firewire: WQ_NON_REENTRANT is meaningless and going away
-
由 Dan Williams 提交于
Returned to intel.com Cc: Vinod Koul <vinod.koul@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jon Mason <jon.mason@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Neil Brown <neilb@suse.de> Cc: Shaohua Li <shli@kernel.org> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
git://git.linaro.org/people/mszyprowski/linux-dma-mapping由 Linus Torvalds 提交于
Pull DMA mapping update from Marek Szyprowski: "This contains an addition of Device Tree support for reserved memory regions (Contiguous Memory Allocator is one of the drivers for it) and changes required by the KVM extensions for PowerPC architectue" * 'for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: init: add support for reserved memory defined by device tree drivers: of: add initialization code for dma reserved memory drivers: of: add function to scan fdt nodes given by path drivers: dma-contiguous: clean source code and prepare for device tree
-
由 Sachin Kamat 提交于
Return directly if memory allocation fails. There is no need of dma_free_coherent(). Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Saeed Bishara <saeed@marvell.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull virtio update from Rusty Russell: "More console fixes; these are the theoretical ones which didn't get CC:stable. But for that reason, I did a merge with master partway through to avoid an unnecessary conflict. Also: a fun lguest bug turns out if you don't clear the TF flag when trapping Bad Things happen to the guest kernel as the stack overflows..." * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_pci: pm: Use CONFIG_PM_SLEEP instead of CONFIG_PM lguest: fix GPF in guest when using gdb. lguest: fix guest kernel stack overflow when TF bit set. lguest: fix BUG_ON() in invalid guest page table. virtio: console: prevent use-after-free of port name in port unplug virtio: console: cleanup an error message virtio: console: fix locking around send_sigio_to_port() virtio: console: add locking in port unplug path virtio: console: add locks around buffer removal in port unplug path tools/lguest: offer VIRTIO_F_ANY_LAYOUT for net device. virtio tools: add .gitignore lguest: Point to the right directory for the lguest launcher
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO update from Alex Williamson: "VFIO updates include safer default file flags for VFIO device fds, an external user interface exported to allow other modules to hold references to VFIO groups, a fix to test for extended config space on PCIe and PCI-x, and new hot reset interfaces for PCI devices which allows the user to do PCI bus/slot resets when all of the devices affected by the reset are owned by the user. For this last feature, the PCI bus reset interface, I depend on changes already merged from Bjorn's PCI pull request. I therefore merged my tree up to commit cb3e4330, which I think was the correct action, but as Stephen Rothwell noted, I failed to provide a commit message indicating why the merge was required. Sorry for that. Thanks, Alex" * tag 'vfio-v3.12-rc0' of git://github.com/awilliam/linux-vfio: vfio: fix documentation vfio-pci: PCI hot reset interface vfio-pci: Test for extended config space vfio-pci: Use fdget() rather than eventfd_fget() vfio: Add O_CLOEXEC flag to vfio device fd vfio: use get_unused_fd_flags(0) instead of get_unused_fd() vfio: add external user support
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client updates from Trond Myklebust: "Highlights include: - Fix NFSv4 recovery so that it doesn't recover lost locks in cases such as lease loss due to a network partition, where doing so may result in data corruption. Add a kernel parameter to control choice of legacy behaviour or not. - Performance improvements when 2 processes are writing to the same file. - Flush data to disk when an RPCSEC_GSS session timeout is imminent. - Implement NFSv4.1 SP4_MACH_CRED state protection to prevent other NFS clients from being able to manipulate our lease and file locking state. - Allow sharing of RPCSEC_GSS caches between different rpc clients. - Fix the broken NFSv4 security auto-negotiation between client and server. - Fix rmdir() to wait for outstanding sillyrename unlinks to complete - Add a tracepoint framework for debugging NFSv4 state recovery issues. - Add tracing to the generic NFS layer. - Add tracing for the SUNRPC socket connection state. - Clean up the rpc_pipefs mount/umount event management. - Merge more patches from Chuck in preparation for NFSv4 migration support" * tag 'nfs-for-3.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (107 commits) NFSv4: use mach cred for SECINFO_NO_NAME w/ integrity NFS: nfs_compare_super shouldn't check the auth flavour unless 'sec=' was set NFSv4: Allow security autonegotiation for submounts NFSv4: Disallow security negotiation for lookups when 'sec=' is specified NFSv4: Fix security auto-negotiation NFS: Clean up nfs_parse_security_flavors() NFS: Clean up the auth flavour array mess NFSv4.1 Use MDS auth flavor for data server connection NFS: Don't check lock owner compatability unless file is locked (part 2) NFS: Don't check lock owner compatibility in writes unless file is locked nfs4: Map NFS4ERR_WRONG_CRED to EPERM nfs4.1: Add SP4_MACH_CRED write and commit support nfs4.1: Add SP4_MACH_CRED stateid support nfs4.1: Add SP4_MACH_CRED secinfo support nfs4.1: Add SP4_MACH_CRED cleanup support nfs4.1: Add state protection handler nfs4.1: Minimal SP4_MACH_CRED implementation SUNRPC: Replace pointer values with task->tk_pid and rpc_clnt->cl_clid SUNRPC: Add an identifier for struct rpc_clnt SUNRPC: Ensure rpc_task->tk_pid is available for tracepoints ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse bugfixes from Miklos Szeredi: "Just a bunch of bugfixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use list_for_each_entry() for list traversing fuse: readdir: check for slash in names fuse: hotfix truncate_pagecache() issue fuse: invalidate inode attributes on xattr modification fuse: postpone end_page_writeback() in fuse_writepage_locked()
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw由 Linus Torvalds 提交于
Pull GFS2 updates from Steven Whitehouse: "This is possibly the smallest ever set of GFS2 patches for a merge window. Also, most of them are bug fixes this time. Two of my three patches (moving gfs2_sync_meta and merging the two writepage implementations) are clean ups with the third (taking the glock ref in examine_bucket) being a fix for a difficult to hit race condition. The removal of an unused memory barrier is a clean up from Bob Peterson, and the "spectator" relates to a rarely used mount option. Ben Marzinski's patch fixes a corner case where the incorrect inode flags were being set, resulting in incorrect behaviour on fsync" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: GFS2: dirty inode correctly in gfs2_write_end GFS2: Don't flag consistency error if first mounter is a spectator GFS2: Remove unnecessary memory barrier GFS2: Merge ordered and writeback writepage GFS2: Take glock reference in examine_bucket() GFS2: Move gfs2_sync_meta to lops.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull ceph updates from Sage Weil: "This includes both the first pile of Ceph patches (which I sent to torvalds@vger, sigh) and a few new patches that add support for fscache for Ceph. That includes a few fscache core fixes that David Howells asked go through the Ceph tree. (Thanks go to Milosz Tanski for putting this feature together) This first batch of patches (included here) had (has) several important RBD bug fixes, hole punch support, several different cleanups in the page cache interactions, improvements in the truncate code (new truncate mutex to avoid shenanigans with i_mutex), and a series of fixes in the synchronous striping read/write code. On top of that is a random collection of small fixes all across the tree (error code checks and error path cleanup, obsolete wq flags, etc)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (43 commits) ceph: use d_invalidate() to invalidate aliases ceph: remove ceph_lookup_inode() ceph: trivial buildbot warnings fix ceph: Do not do invalidate if the filesystem is mounted nofsc ceph: page still marked private_2 ceph: ceph_readpage_to_fscache didn't check if marked ceph: clean PgPrivate2 on returning from readpages ceph: use fscache as a local presisent cache fscache: Netfs function for cleanup post readpages FS-Cache: Fix heading in documentation CacheFiles: Implement interface to check cache consistency FS-Cache: Add interface to check consistency of a cached object rbd: fix null dereference in dout rbd: fix buffer size for writes to images with snapshots libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calc rbd: fix I/O error propagation for reads ceph: use vfs __set_page_dirty_nobuffers interface instead of doing it inside filesystem ceph: allow sync_read/write return partial successed size of read/write. ceph: fix bugs about handling short-read for sync read mode. ceph: remove useless variable revoked_rdcache ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag由 Linus Torvalds 提交于
Pull metag architecture changes from James Hogan: - Device tree updates for TZ1090 GPIO drivers merged via GPIO tree. - Add driver for ImgTec PDC irqchip as found in TZ1090 SoC. - Add linux-metag mailing list to MAINTAINERS file. * tag 'metag-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: irq-imgpdc: add ImgTec PDC irqchip driver MAINTAINERS: add linux-metag mailing list metag: tz1090: instantiate gpio-tz1090-pdc metag: tz1090: select and instantiate gpio-tz1090 metag: tz1090: select and instantiate irq-imgpdc
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC changes from Vineet Gupta: - ARC MM changes: - preparation for MMUv4 (accomodate new PTE bits, new cmds) - Rework the ASID allocation algorithm to remove asid-mm reverse map - Boilerplate code consolidation in Exception Handlers - Disable FRAME_POINTER for ARC - Unaligned Access Emulation for Big-Endian from Noam - Bunch of fixes (udelay, missing accessors) from Mischa * tag 'arc-v3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: fix new Section mismatches in build (post __cpuinit cleanup) Kconfig.debug: Add FRAME_POINTER anti-dependency for ARC ARC: Fix __udelay calculation ARC: remove console_verbose() from setup_arch() ARC: Add read*_relaxed to asm/io.h ARC: Handle un-aligned user space access in BE. ARC: [ASID] Track ASID allocation cycles/generations ARC: [ASID] activate_mm() == switch_mm() ARC: [ASID] get_new_mmu_context() to conditionally allocate new ASID ARC: [ASID] Refactor the TLB paranoid debug code ARC: [ASID] Remove legacy/unused debug code ARC: No need to flush the TLB in early boot ARC: MMUv4 preps/3 - Abstract out TLB Insert/Delete ARC: MMUv4 preps/2 - Reshuffle PTE bits ARC: MMUv4 preps/1 - Fold PTE K/U access flags ARC: Code cosmetics (Nothing semantical) ARC: Entry Handler tweaks: Optimize away redundant IRQ_DISABLE_SAVE ARC: Exception Handlers Code consolidation ARC: Add some .gitignore entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68knommu fixes from Greg Ungerer: "Just a small collection of cleanups and fixes this time, no big changes. The most interresting are to make the m68k and m68knommu consistently use CONFIG_IOMAP, clean out some unused board config options and flush the cache on signal stack creation" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: remove 16 unused boards in Kconfig.machine m68k: define 'VM_DATA_DEFAULT_FLAGS' no matter whether has 'NOMMU' or not m68knommu: user generic iomap to support ioread*/iowrite* m68k/coldfire: flush cache when creating the signal stack frame m68knommu: Mark functions only called from setup_arch() __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML updates from Richard Weinberger: "This pile contains mostly fixes and improvements for issues identified by Richard W M Jones while adding UML as backend to libguestfs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add irq chip um/mask handlers um: prctl: Do not include linux/ptrace.h um: Run UML in it's own session. um: Cleanup SIGTERM handling um: ubd: Introduce submit_request() um: ubd: Add REQ_FLUSH suppport um: Implement probe_kernel_read() um: hostfs: Fix writeback
-
- 09 9月, 2013 8 次提交
-
-
由 Ian Kent 提交于
When reconnecting to automounts at startup an autofs ioctl is used to find the device and inode of existing mounts so they can be used to open a file descriptor of possibly covered mounts. At this time the the caller might not yet "own" the mount so it can trigger calling ->d_automount(). This causes automount to hang when trying to reconnect to direct or offset mount types. Consequently kern_path() can't be used but kern_path_mountpoint() can be. Signed-off-by: NIan Kent <raven@themaw.net> Cc: Jeff Layton <jlayton@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
This is the fix that the last two commits indirectly led up to - making sure that we don't call dput() in a bad context on the dentries we've looked up in RCU mode after the sequence count validation fails. This basically expands d_rcu_to_refcount() into the callers, and then fixes the callers to delay the dput() in the failure case until _after_ we've dropped all locks and are no longer in an RCU-locked region. The case of 'complete_walk()' was trivial, since its failure case did the unlock_rcu_walk() directly after the call to d_rcu_to_refcount(), and as such that is just a pure expansion of the function with a trivial movement of the resulting dput() to after 'unlock_rcu_walk()'. In contrast, the unlazy_walk() case was much more complicated, because not only does convert two different dentries from RCU to be reference counted, but it used to not call unlock_rcu_walk() at all, and instead just returned an error and let the caller clean everything up in "terminate_walk()". Happily, one of the dentries in question (called "parent" inside unlazy_walk()) is the dentry of "nd->path", which terminate_walk() wants a refcount to anyway for the non-RCU case. So what the new and improved unlazy_walk() does is to first turn that dentry into a refcounted one, and once that is set up, the error cases can continue to use the terminate_walk() helper for cleanup, but for the non-RCU case. Which makes it possible to drop out of RCU mode if we actually hit the sequence number failure case. Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aaron Lu 提交于
The virtio_pci_freeze/restore are defined under CONFIG_PM but is used by SET_SYSTEM_SLEEP_PM_OPS macro, which is defined under CONFIG_PM_SLEEP. So if CONFIG_PM_SLEEP is not cofigured but CONFIG_PM_RUNTIME is, the following warning message appeared: drivers/virtio/virtio_pci.c:770:12: warning: ‘virtio_pci_freeze’ defined but not used [-Wunused-function] static int virtio_pci_freeze(struct device *dev) ^ drivers/virtio/virtio_pci.c:790:12: warning: ‘virtio_pci_restore’ defined but not used [-Wunused-function] static int virtio_pci_restore(struct device *dev) ^ Fix it by changing CONFIG_PM to CONFIG_PM_SLEEP. Signed-off-by: NAaron Lu <aaron.lu@intel.com> Reviewed-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... and move the extern from linux/namei.h to fs/internal.h, along with that of vfs_path_lookup(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... and massage it a bit to reduce nesting Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
This simplifies the RCU to refcounting code in particular. I was originally intending to leave this for later, but walking through all the dput() logic (see previous commit), I realized that the dput() "might_sleep()" check was misleadingly weak. And I removed it as misleading, both for performance profiling and for debugging. However, the might_sleep() debugging case is actually true: the final dput() can indeed sleep, if the inode of the dentry that you are releasing ends up sleeping at iput time (see dentry_iput()). So the problem with the might_sleep() in dput() wasn't that it wasn't true, it was that it wasn't actually testing and triggering on the interesting case. In particular, just about *any* dput() can indeed sleep, if you happen to race with another thread deleting the file in question, and you then lose the race to the be the last dput() for that file. But because it's a very rare race, the debugging code would never trigger it in practice. Why is this problematic? The new d_rcu_to_refcount() (see commit 15570086: "vfs: reimplement d_rcu_to_refcount() using lockref_get_or_lock()") does a dput() for the failure case, and it does it under the RCU lock. So potentially sleeping really is a bug. But there's no way I'm going to fix this with the previous complicated "lockref_get_or_lock()" interface. And rather than revert to the old and crufty nested dentry locking code (which did get this right by delaying the reference count updates until they were verified to be safe), let's make forward progress. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This is me being a bit OCD after all the dentry optimization work this merge window: profiles end up showing 'dput()' as a rather expensive operation, and there were two unrelated bad reasons for that. The first reason was reading d_lockref.count for debugging purposes, which touches the lockref cacheline (for reads) before really need to. More importantly, the debugging test in question is _wrong_, and has hidden bugs. It's true that we can only sleep when the count goes down to zero, but the test as-is hides the much more subtle bug that happens if we race with somebody else deleting the file. Anyway we _will_ touch that cacheline, but let's do it for a write and in the right routine (ie in "lockref_put_or_lock()") which annotates the costs better. So remove the misleading debug code. The other was an unnecessary access to the cacheline that contains the d_lru list, just to check whether we already were on the LRU list or not. This is exactly what we have d_flags for, so that we can avoid touching extra cache lines for the common case. So just add another bit for "is this dentry on the LRU". Finally, mark the tests properly likely/unlikely, so that the common fast-paths are dense in the instruction stream. This makes the profiles look much saner. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 9月, 2013 1 次提交
-
-
git://git.infradead.org/users/willy/linux-nvme由 Linus Torvalds 提交于
Pull NVM Express driver update from Matthew Wilcox. * git://git.infradead.org/users/willy/linux-nvme: NVMe: Merge issue on character device bring-up NVMe: Handle ioremap failure NVMe: Add pci suspend/resume driver callbacks NVMe: Use normal shutdown NVMe: Separate controller init from disk discovery NVMe: Separate queue alloc/free from create/delete NVMe: Group pci related actions in functions NVMe: Disk stats for read/write commands only NVMe: Bring up cdev on set feature failure NVMe: Fix checkpatch issues NVMe: Namespace IDs are unsigned NVMe: Update nvme_id_power_state with latest spec NVMe: Split header file into user-visible and kernel-visible pieces NVMe: Call nvme_process_cq from submission path NVMe: Remove "process_cq did something" message NVMe: Return correct value from interrupt handler NVMe: Disk IO statistics NVMe: Restructure MSI / MSI-X setup NVMe: Use kzalloc instead of kmalloc+memset
-