- 13 10月, 2007 40 次提交
-
-
由 FUJITA Tomonori 提交于
srp transport works for target drivers without supported_mode attribute but it would be better to use it explicitly. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
This adds minimum target driver support like the srp transport does: - fc_remote_port_{rolechg,delete} calls scsi_tgt_it_nexus_{create,destroy} for target drivers. - add callbacks to notify target drivers of the nexus and tmf operation results to fc_function_template. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
This adds supported_mode and active_mode attributes to /sys/class/sys_host/hostX/ for specifying the mode that a lld supports and the currently activated mode. The output format is similar to fc rport roles: luce:/sys/class/scsi_host/host0$ cat supported_mode Initiator luce:/sys/class/scsi_host/host0$ cat active_mode Initiator The mode values uses bitmap since we would support dual-mode llds in the future like this: luce:/sys/class/scsi_host/host0$ cat supported_mode Initiator, Target The supported_mode attribute looks at a scsi_host_template and the active_mode attribute looks at a scsi_host. We would add a hook to a scsi_host_template to change the active_mode attribute dynamically. But now there is no hook since no lld supports that feature. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
should use host->can_queue instead of host->hostt->can_queue. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Gilbert Wu 提交于
Add new HBA PCI ID (0x416) for ASC58300 which has eight port SAS and SATA PCI-X 133MHz low profile host bus adapter with two mini SAS 4x external connectors. Signed-off-by: NGilbert Wu <gilbert_wu@adaptec.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Salyzyn, Mark 提交于
Add the SMC LP, SUN EM and Adaptec 5405 cards to the aacraid documentation list of supported products. These cards are picked up with family match, so no associated code changes. Signed-off-by: NMark Salyzyn <aacraid@adaptec.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 HighPoint Linux Team 提交于
updated patch based on Jeff Garzik's comments. - check adapter firmware version and use appropriate interface accordingly - add new PCI device IDs and use PCI_VDEVICE macro - update driver version string - remove unused data structures - remove unnecessary typecasts Signed-off-by: NHighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christof Schmitt 提交于
Already register the debug feature before the zfcp adapter is set online. This allows to use the debug feature to investigate the online/offline sequence. Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Swen Schillig 提交于
cleanup, using ERP request mempool for all ERP versions of the exchange functions (exchange_config (ECD), exchange_port (EPD) ) providing individual versions of the ECD, EPD functions for ERP and other purposes (_sync). Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christof Schmitt 提交于
This change has already been discussed on linux-scsi: http://marc.info/?t=118771096400003 http://marc.info/?t=118760913100005Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Acked-by: NJames Smart <James.Smart@Emulex.Com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christof Schmitt 提交于
Remove braces for only one statement Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christof Schmitt 提交于
zfcp_adapter_enqueue initialized adapter->ccw_device twice with the same value. Remove the second assignment, since it is not necessary. Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Heiko Carstens 提交于
Avoid "if (whatever) ;" constructs since they seem to confuse people, even if there is a comment. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christof Schmitt 提交于
correct indentation for nested if-else Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mariusz Kozlowski 提交于
In NCR_D700, a4000t, aic7xxx_old, bvme6000, dpt_i2o, gdth, lpfc, megaraid, mvme16x osst, pluto, qla2xxx, zorro7xx Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Prakash, Sathya 提交于
Recently LSI Logic Corp was renamed as LSI Corp, so whereever there is a reference of LSI Logic, it is changed to LSI in mpt fusion driver code. signed-off-by: NSathya Prakash <sathya.prakash@lsi.com> Acked-by: NEric Moore <Eric.Moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Prakash, Sathya 提交于
When there is state change in FC links, a message is displayed with old and new link speed. signed-off-by: NSathya Prakash <sathya.prakash@lsi.com> Acked-by: NEric Moore <Eric.Moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Prakash, Sathya 提交于
The data structure definitions from mptsas.c are moved to a new header file mptsas.h signed-off-by: NSathya Prakash <sathya.prakash@lsi.com> Acked-by: NEric Moore <Eric.Moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Prakash, Sathya 提交于
The call back index requires only u8 but in lot of places it is referred as int, now everywhere the call back index variables are declared as u8 with uniform name cb_idx signed-off-by: NSathya Prakash <sathya.prakash@lsi.com> Acked-by: NEric Moore <Eric.Moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Prakash, Sathya 提交于
Added support for sending the task management requests through High priority request FIFO instead of Doorbell writes when firmware support High priority FIFO. signed-off-by: NSathya Prakash <sathya.prakash@lsi.com> Acked-by: NEric Moore <Eric.Moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Eric Moore 提交于
Per request from Matthew Wilcox - using PCI_VENDOR_ATTO. Add support for ATTO UL4D, they are rebranded 53C1030. The changes are 1. Adding a new PCI vendor ID in pci table 2. The spi_port_page_2 is in different format than that of LSI generic spi_port_page_2 and hence mapping code is added. signed-off-by: NSathya Prakash <sathya.prakash@lsi.com> signed-off-by: NEric Moore <Eric.Moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Eric Moore 提交于
A new PCI_VENDOR_ID for pci_ids.h. signed-off-by: NEric Moore <Eric.Moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Gabriel C 提交于
In file included from drivers/scsi/g_NCR5380_mmio.c:9: drivers/scsi/g_NCR5380.c:559:5: warning: "NCR53C400_PSEUDO_DMA" is not defined Signed-off-by: NGabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Adrian Bunk 提交于
Every file should #include the headers containing the prototypes for its global functions (in this case for scsi_schedule_eh()). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Morton 提交于
drivers/scsi/ips.c: In function 'ips_insert_device': drivers/scsi/ips.c:6957: warning: 'index' may be used uninitialized in this function Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jesper Juhl 提交于
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Acked-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Morton 提交于
Too generic, clashes with ISDN. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NMark Salyzyn <aacraid@adaptec.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jesper Juhl 提交于
The Coverity checker noticed that we may overrun a statically allocated array in drivers/scsi/lpfc/lpfc_sli.c::lpfc_sli_hbqbuf_find(). The case is this; In 'struct lpfc_hba' we have #define LPFC_MAX_HBQS 4 ... struct lpfc_hba { ... struct hbq_s hbqs[LPFC_MAX_HBQS]; ... }; But then in lpfc_sli_hbqbuf_find() we have this code hbqno = tag >> 16; if (hbqno > LPFC_MAX_HBQS) return NULL; if 'hbqno' ends up as exactely 4, then we won't return, and then this list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) { will cause an overflow of the statically allocated array at index 4, since the valid indices are only 0-3. I propose this patch, that simply changes the 'hbqno > LPFC_MAX_HBQS' into 'hbqno >= LPFC_MAX_HBQS' as a possible fix. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Acked-by: NJames Smart <James.Smart@Emulex.Com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 FUJITA Tomonori 提交于
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
The 700+-line comment at the top of the advansys driver fits more comfortably in Documentation/scsi. Delete the sections on: - kernels supported - other files modified (obsolete) - source comments (obsolete) - tests to run - release history (that's what a VCS is for) - contacting connectcom (the domain has expired and the phone number is now in use by another organisation) Known problems/fix list is moved down to the section where jejb put his FIXME. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
Use memcpy to initialise eep_config instead of a loop. For AdvInitFrom38C1600EEP where we need to modify the default EEPROM configuration, do it after the loop, and do it using the structure definition, not by finding the right byte. I think it was wrong for big-endian machines. Also delete some non-useful comments and prototypes. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
The driver kept a copy of the PCI config address; refer to the pci_dev associated with the card instead. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
Convert adv_isr_callback, adv_async_callback and asc_isr_callback into direct calls. Remove the unused asc_exe_callback. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
The cfg structures are supposed to be disposable after initialisation; with the 'dev' used for DMA mapping in there, that's not possible. Move the dev to the board. Also inline AscInitFromAscDvcVar into its only caller, remove some unnecessary prototypes and sort out a few minor formatting issues. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
n_io_port isn't suitable for advansys because some of the boards have more than 255 bytes of io port space. There's already a driver-private replacement, asc_n_io_port, but for some reason the driver was still setting and occasionally reporting n_io_port. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
At some point during Linux 2.1 development, ioremap() gained the ability to handle addresses which weren't page-aligned. Also expand the CONFIG_PCI range to encompass that entire section of wide board initialisation, since all wide boards are PCI. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
By moving a test from AscGetChipBusType into its only caller, we can delete the whole function Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
Remove some useless forward declarations Reformat some comments, debug messages, and the occasional piece of real code Removal of unnecessary braces Remove duplicate setting of shost->irq Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-