- 30 8月, 2005 40 次提交
-
-
由 Clemens Ladisch 提交于
USB generic driver The nrpacks module parameter is used only when initializing a playback stream, so it doesn't hurt to make it writeable. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver When determining how many packets are needed for one period, we cannot assume that all packets have their maximum size -- we always use the nominal sample rate when sending data, and could use an even lower rate when the endpoint uses frequency feedback. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver When capturing audio data, we do not know beforehand how many samples the device sends per frame, so we have to use URBs that are as short as possible to make sure that we can handle period boundaries without any additional latencies. Furthermore, the total count of URBs submitted doesn't matter when capturing, so we can just use the maximum number. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Memalloc module,PCM Midlevel,Timer Midlevel,GUS Library,AC97 Codec ALI5451 driver,RME9652 driver Make some functions/variables that are used in only one file static. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Sasha Khapyorsky 提交于
HDA generic driver,HDA Codec driver Support for Si3054/5 HDA modem codecs. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sasha Khapyorsky 提交于
HDA Codec driver,HDA generic driver Summar: hda-codec - MFG support This adds Modem Functional Group (MFG) support and option for 9600 sample rate. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Karsten Wiese 提交于
PCM Midlevel,ALSA<-OSS emulation,USB USX2Y This patch removes open_flag from struct _snd_pcm_substream. All of its uses are substituted by querying struct _snd_pcm_substream's member ffile instead. Signed-off-by: NKarsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
YMFPCI driver Implements mixer controls for the volume of each playback substream of the main PCM device. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Dirk Opfer 提交于
ARM PXA2XX driver - change pxa2xx_ac97_do_suspend and pxa2xx_ac97_do_resume to use the expected arguments Signed-off-by: NDirk Opfer <dirk@do13.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Liam Girdwood 提交于
AC97 Codec This patch fixes a problem whereby the WM9713 has modem functionality incorrectly detected after an AC97 cold reset. Changes:- o Cleared AC97_SCAP_MODEM in wm9713 scaps Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Liam Girdwood 提交于
ARM PXA2XX driver This patch extends the period of an AC97 warm reset on the PXA27x from 50uS to 500uS. The shorter reset didn't always guarantee that the codec would wake up. Changes:- o Change pxa27x warm reset period to 500uS o Removed double semi-colon. Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Documentation,AD1816A driver Added clockfreq module option for the card with a different clock frequency than 33kHz. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Digigram VX core,ENS1370/1+ driver,CA0106 driver,EMU10K1/EMU10K2 driver RME HDSP driver,RME9652 driver For consistency, use the PCM interface instead of MIXER for IEC958 default/mask/stream mixer controls. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
CMI8330 driver,ENS1370/1+ driver,FM801 driver,VIA82xx driver,AC97 Codec ALI5451 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver ICE1712 driver,ICE1724 driver Where appropriate, use the SNDRV_CTL_NAME_IEC958 instead of a literal string. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
Documentation Added clockfreq module option for the card with a different clock frequency than 33kHz. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Henrik Kretzschmar 提交于
ALSA Core This patch adds the __init macro to snd_memory_init(). Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Liam Girdwood 提交于
AC97 Codec,PCI drivers I've made the review changes and as requested I've pasted the RFC by Nicolas below:- 'I would like to know what people think of the following patch. It allows for a codec on an AC97 bus to be shared with other drivers which are completely unrelated to audio. It registers a new bus type, and whenever a codec instance is created then a device for it is also registered with the driver model using that bus type. This allows, for example, to use the extra features of the UCB1400 like the touchscreen interface and the additional GPIOs and ADCs available on that chip for battery monitoring. I have a working UCB1400 touchscreen driver here that simply registers with the driver model happily working alongside with audio features using this.' Changes over RFC:- o Now matches codec name within codec group. o Added ac97_dev_release() to stop kernel complaining about no release method for device. o Added 'config SND_AC97_BUS' to sound/pci/Kconfig and moved 'config SND_AC97_CODEC' out with the PCI=n statement. o module is now called snd-ac97-bus Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Documentation,CS46xx driver,EMU10K1/EMU10K2 driver,AD1848 driver SB16/AWE driver,CMIPCI driver,ENS1370/1+ driver,RME32 driver RME96 driver,ICE1712 driver,ICE1724 driver,KORG1212 driver RME HDSP driver,RME9652 driver This patch changes .iface to SNDRV_CTL_ELEM_IFACE_MIXER whre _PCM or _HWDEP was used in controls that are not associated with a specific PCM (sub)stream or hwdep device, and changes some controls that got inconsitent .iface values due to copy+paste errors. Furthermore, it makes sure that all control that do use _PCM or _HWDEP use the correct number in the .device field. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
VIA82xx driver Added the dxs entry for Acer Aspire 1524 WMLi. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Nicolas Graziano 提交于
HDA Codec driver Fixed LFE volume/switch control. Signed-off-by: NNicolas Graziano <nicolas.graziano@wanadoo.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Added the default config for ASUS P5AD2. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver - Fixed the reordering of surround channels. Originally reported by Nicolas GRAZIANO <nicolas.graziano@wanadoo.fr>. - Show the selected ssid when debug option is set. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Liam Girdwood 提交于
AC97 Codec o Enhanced current WM97xx support to provide additional controls and use the kcontrol suffix naming convention. o Added AC97_HAS_NO_MIC, AC97_HAS_NO_TONE and AC97_HAS_NO_STD_PCM. o Cleaned up WM97xx related comments. o Removed some wm9713 double mono controls and replaced with stereo controls. Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
Merge refs/heads/upstream-fixes from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Andrew Morton 提交于
Damir Perisa <damir.perisa@solnet.ch> reports: drivers/net/s2io.h:765: error: invalid lvalue in assignment drivers/net/s2io.h:766: error: invalid lvalue in assignment That's a gcc4 error. I don't see why the casts are there anyway.. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 David Gibson 提交于
The {BEGIN,END}_FTR_SECTION asm macros used in ppc64 to nop out sections of code at runtime cannot be nested. However, we do nest them in hash_low.S. We get away with it there, because there is nothing between the BEGIN markers for each section. However, that's confusing to someone reading the code. This patch removes the nested ifset and ifclr feature sections, replacing them with a single feature section in the full mask/value form. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Joel Schopp 提交于
This patch fixes a rare memory leak found by Coverity. Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Joel Schopp 提交于
Coverity found more unused code. Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
While ppc64 has the CONFIG_HZ Kconfig option, it wasnt actually being used. Connect it up and set all platforms to 250Hz. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jake Moilanen 提交于
Here's the 970MP's PVR (processor version register) entry for oprofile. Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Some RS64-based machines (p620, F80, others) have problems with firmware returning 0xdeadbeef instead of failure to allocations that end at the 1GB mark. We have two options: 1. Detect the undocumented 0xdeadbeef return value and interpret it as a failure. 2. Avoid allocating that high. (2) is really the cleaner solution here. 768MB is plenty of room so use that as the max alloc_top instead of 1GB. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
They differed in either simple comments or in the protecting ifdefs. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Move the identical files from include/asm-ppc{,64}/ to include/asm-powerpc/. Remove hdreg.h completely as it is unused in the tree. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
The ppc and ppc64 trees are hopefully going to merge over time, so this patch begins the process by creating a place for the merging of the header files. Create include/asm-powerpc (and move linkage.h into it from asm-{ppc,ppc64} since we don't like empty directories). Modify the ppc and ppc64 Makefiles to cope. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Make MODULE_DEVICE_TABLE work for vio devices. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Create vio_bus_ops so that we just pass a structure to vio_bus_init instead of three separate function pointers. Rearrange vio.h to avoid forward references. vio.h only needs struct device_node from prom.h so remove the include and just declare it. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Take some assignments out of vio_register_device_common and rename it to vio_register_device. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Formatting changes to vio.c to bring it closer to the kernel coding standard. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-