- 20 7月, 2007 40 次提交
-
-
由 Trond Myklebust 提交于
Ensure that opendata->state is always initialised when we do state recovery. Ensure that we set the filehandle in the case where we're doing an "OPEN_CLAIM_PREVIOUS" call due to a server reboot. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Bruce's patch broke the ability to compile RPCSEC_GSS as a module. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) [TG3]: Fix msi issue with kexec/kdump. [NET] XFRM: Fix whitespace errors. [NET] TIPC: Fix whitespace errors. [NET] SUNRPC: Fix whitespace errors. [NET] SCTP: Fix whitespace errors. [NET] RXRPC: Fix whitespace errors. [NET] ROSE: Fix whitespace errors. [NET] RFKILL: Fix whitespace errors. [NET] PACKET: Fix whitespace errors. [NET] NETROM: Fix whitespace errors. [NET] NETFILTER: Fix whitespace errors. [NET] IPV4: Fix whitespace errors. [NET] DCCP: Fix whitespace errors. [NET] CORE: Fix whitespace errors. [NET] BLUETOOTH: Fix whitespace errors. [NET] AX25: Fix whitespace errors. [PATCH] mac80211: remove rtnl locking in ieee80211_sta.c [PATCH] mac80211: fix GCC warning on 64bit platforms [GENETLINK]: Dynamic multicast groups. [NETLIKN]: Allow removing multicast groups. ...
-
由 Jens Axboe 提交于
ide-disk calls ide_end_request(drive, 0, 0); to finish an unknown request, but this doesn't work so well for non-fs requests, since ide_end_request() internally looks at ->hard_cur_sectors to see how much data to end. Only file system requests store a transfer value in there, pc requests fill out ->data_len as a byte based transfer value instead. Since we ask to end 0 bytes of that request, it will never be terminated and ide-disk gets stuck in a loop "handling" that same request over and over. Switch __ide_end_request() to take a byte based transfer count, and adjust ide_end_request() to look at the right field to determine how much IO to end when it's being passed in 0. Acked-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Tested-By: NGiacomo Catenazzi <cate@debian.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Bruce and David's patches clashed. fs/afs/flock.c: In function 'afs_do_getlk': fs/afs/flock.c:459: error: void value not ignored as it ought to be Cc: "J. Bruce Fields" <bfields@fieldses.org> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
I've been chasing these comments around this file all week. Hopefully we're straight now. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Doug Thompson 提交于
Updated the EDAC kernel documentation Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Doug Thompson 提交于
Some simple fixes to properly reference counter values from the block attribute level of edac_device objects. Properly sequencing the array pointer was added, resulting in correct identification of block level attributes from their base class functions. Added more verbose debug statement for event tracking. Also during some corner testing, found a bug in the store/show sequence of operations for the block attribute/controls management. An old intermediate structure for 'blocks' was still in the processing pipeline. This patch removes that old structure and correctly utilizes the new struct edac_dev_sysfs_block_attribute for passing control from the sysfs to the low level store/show function of the edac driver. Now the proper kobj pointer to passed downward to the store/show functions. Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Update maintainer information on edac components Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ranganathan Desikan 提交于
New EDAC driver for the i82975x memory controller chipset Used on ASUS motherboards [akpm@linux-foundation.org: fix multiple coding-style bloopers] Signed-off-by: <arvind@acarlab.com> Signed-off-by: NRanganathan Desikan <rdesikan@jetzbroadband.com> Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Doug Thompson 提交于
Fix mutex locking deadlock on the device controller linked list. Was calling a lock then a function that could call the same lock. Moved the cancel workq function to outside the lock Added some short circuit logic in the workq code Added comments of description Code tidying Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Doug Thompson 提交于
Change EXPORT_SYMBOLs to EXPORT_SYMBOLS_GPL Tidy changes: blank lines, inline removal, add comment Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
With feedback, this patch corrects operation of the kobject release operation on kobjects, attributes and controls for the edac_device. Cc: Alan Cox alan@lxorguk.ukuu.org.uk Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Doug Thompson 提交于
This patch refactors the 'releasing' of kobjects for the edac_mc type of device. The correct pattern of kobject release is followed. As internal kobjs are allocated they bump a ref count on the top level kobj. It in turn has a module ref count on the edac_core module. When internal kobjects are released, they dec the ref count on the top level kobj. When the top level kobj reaches zero, it decrements the ref count on the edac_core object, allow it to be unloaded, as all resources have all now been released. Cc: Alan Cox alan@lxorguk.ukuu.org.uk Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Doug Thompson 提交于
Refactoring of sysfs code necessitated the refactoring of the edac_device_alloc() and edac_device_add_device() apis, of moving the index value to the alloc() function. This patch alters the in tree drivers to utilize this new api signature. Having the index value performed later created a chicken-and-the-egg issue. Moving it to the alloc() function allows for creating the necessary sysfs entries with the proper index number Cc: Alan Cox alan@lxorguk.ukuu.org.uk Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Doug Thompson 提交于
Refactoring of sysfs code necessitated the refactoring of the edac_mc_alloc() and edac_mc_add_mc() apis, of moving the index value to the alloc() function. This patch alters the in tree drivers to utilize this new api signature. Having the index value performed later created a chicken-and-the-egg issue. Moving it to the alloc() function allows for creating the necessary sysfs entries with the proper index number Cc: Alan Cox alan@lxorguk.ukuu.org.uk Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
This patch fixes and enhances the driver level set of sysfs attributes that can be added to the 'block' level of an edac_device type of driver. There is a controller information structure, which contains one or more instances of device. Each instance will have one or more blocks of device specific counters. This patch fixes the ability to have more detailed attributes/controls for each of the 'blocks', providing for the addition of controls/attributes from the low level driver to user space via sysfs. Cc: Alan Cox alan@lxorguk.ukuu.org.uk Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Egor Martovetsky 提交于
NEW EDAC driver for the memory controllers on PA Semi PA6T-1682M. Changes since last submission: * Rebased on top of 2.6.22-rc4-mm2 with the EDAC changes merged there. * Minor checkpatch.pl cleanups * Renamed ctl_name * Added dev_name * edac_mc.h -> edac_core.h [akpm@linux-foundation.org: make printk more informative] Cc: Alan Cox alan@lxorguk.ukuu.org.uk Signed-off-by: NEgor Martovetsky <egor@pasemi.com> Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: Doug Thompson <dougthompson@xmission.com Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Grondona 提交于
Found a 'reversal' decoding bug in the driver. This patch fixes that mapping to correctly display the CSROW entries in their proper order. Users will be enable to correctly identifiy the failing DIMM with this fix. [akpm@linux-foundation.org: unneeded (and undesirable) cast of void*] Cc: Alan Cox alan@lxorguk.ukuu.org.uk Signed-off-by: NMark Grondona <mgrondona@llnl.gov> Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Doug Thompson 提交于
A previous patch changed the edac_mc src file from semaphore usage to mutex This patch changes the edac_device src file as well, from semaphore use to mutex operation. Use a mutex primitive for mutex operations, as it does not require a semaphore Cc: Alan Cox alan@lxorguk.ukuu.org.uk Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Removed the no-longer-needed file edac_mc.h Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Refactored the function edac_op_state_toString() to be edac_op_state_to_string() for consistent style, and its callers Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Refactor the edac_align_ptr() function to reduce the noise of casting the aligned pointer to the various types of data objects and modified its callers to its new signature Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
For the file edac_device.c perform some coding style enhancements Add some function header comments Made for better readability commands Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Various code style conformance patches on the i5000 driver Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Patches to conform to coding style, namely static don't need to be initialized to NULL nor '0', as that is the default Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marisuz Kozlowski 提交于
Found a typo in one of the #defines in the driver MTR_DIM_RANKS --> MTR_DIMM_RANK Signed-off-by: NMarisuz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
pci_ids.h needs two of the AMD NB device-ids namely, Addressmap and the Memory Controller devices This patch adds those to the pci_id.h include file Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Compiling this module gave a warning that the return value of 'pci_bus_add_device()' was not checked. This patch adds that check and an output message Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Uhlenkott 提交于
If ERRSTS indicates that there's no error then we don't need to bother reading the other registers. In addition to making the common case faster, this actually fixes a small race where we don't see an error but we clear the error bits anyway, potentially wiping away info on an error that happened in the interim (or where a CE arrives between the first and second read of ERRSTS, causing us to falsely claim "UE overwrote CE"). Signed-off-by: NJason Uhlenkott <juhlenko@akamai.com> Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
1) Remove an old CVS ID string 2) change EDAC from a tristate option to a simple bool option 3) In addition to the X86 arch, PPC and MIPS also have drivers in the submission queue. This patch turns on the EDAC flag for those archs. Each driver will have its respective 'depends on ARCH' set. Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
This patch fixes some remnant spaces inserted by the use of Lindent. Seems Lindent adds some spaces when it shoulded. These have been fixed. In addition, goto targets have issues, these have been fixed in this patch. Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Added new maintainers for the new EDAC drivers. Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Kconfig - modified the help of EDAC Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
The error handling output strings needed to be refactored for better displaying of the error informaton. Also needed to added offset_value for output as well Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Added new controls for the edac_device and edac_mc sysfs folder. These can be initialized by the low level driver to provide misc controls into the low level driver for its use Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Jiang 提交于
Move x86 drivers to new pci controller setup Signed-off-by: NDave Jiang <djiang@mvista.com> Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Run r82600_edac.c file through Lindent for cleanup Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NDave Jiang <djiang@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Douglas Thompson 提交于
Run i82443bxgx.c file through Lindent for cleanup Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NDave Jiang <djiang@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Jiang 提交于
Run e752x_edac.c file through Lindent for cleanup Signed-off-by: NDave Jiang <djiang@mvista.com> Signed-off-by: NDouglas Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-