- 22 8月, 2014 3 次提交
-
-
由 Alex Deucher 提交于
bug: https://bugs.freedesktop.org/show_bug.cgi?id=82912Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Display fixes from Ville and Imre, all cc: stable. * tag 'drm-intel-fixes-2014-08-21' of git://anongit.freedesktop.org/drm-intel: drm/i915: don't try to retrain a DP link on an inactive CRTC drm/i915: make sure VDD is turned off during system suspend drm/i915: cancel hotplug and dig_port work during suspend and unload drm/i915: fix HPD IRQ reenable work cancelation drm/i915: take display port power domain in DP HPD handler drm/i915: Don't try to enable cursor from setplane when crtc is disabled drm/i915: Skip load detect when intel_crtc->new_enable==true drm/i915: Fix locking for intel_enable_pipe_a()
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
more radeon fixes * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/radeon: Use write-combined CPU mappings of ring buffers with PCIe" drm/radeon: fix active_cu mask on SI and CIK after re-init (v3) drm/radeon: fix active cu count for SI and CIK drm/radeon: re-enable selective GPUVM flushing drm/radeon: Sync ME and PFP after CP semaphore waits v4 drm/radeon: fix display handling in radeon_gpu_reset drm/radeon: fix pm handling in radeon_gpu_reset drm/radeon: Only flush HDP cache for indirect buffers from userspace drm/radeon: properly document reloc priority mask
-
- 20 8月, 2014 3 次提交
-
-
由 Alex Deucher 提交于
This reverts commit 1490434f. Several people have reported regressions with this patch on kabini.
-
由 Alex Deucher 提交于
Need to initialize the mask to 0 on init, otherwise it keeps increasing. bug: https://bugzilla.kernel.org/show_bug.cgi?id=82581 v2: also fix cu count v3: split count fix into separate patch Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
This fixes the CU count reported to userspace for OpenCL. bug: https://bugzilla.kernel.org/show_bug.cgi?id=82581Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Cc: stable@vger.kernel.org
-
- 19 8月, 2014 6 次提交
-
-
由 Alex Deucher 提交于
Now that the PFP and ME synchronization is fixed, we can enable this again reliably. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
-
由 Christian König 提交于
Fixes lockups due to CP read GPUVM faults when running piglit on Cape Verde. v2 (chk): apply the fix to R600+ as well, on CIK only the GFX CP has a PFP, add more comments to R600 code, enable flushing again v3: (agd5f): only apply to 7xx+. r6xx does not have the packet. v4: (agd5f): split flush change into a separate patch, fix formatting Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
-
由 Alex Deucher 提交于
If the display hw was reset or a hard reset was used, we need to re-init some of the common display hardware as well. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
pm_suspend is handled in the radeon_suspend callbacks. pm_resume has special handling depending on whether dpm or legacy pm is enabled. Change radeon_gpu_reset to mirror the behavior in the suspend and resume pathes. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
-
由 Michel Dänzer 提交于
It isn't necessary for command streams generated by the kernel (at least not while we aren't storing ring or indirect buffers in VRAM). Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Instead of hard coding the value properly document that this is an userspace interface. No intended functional change. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 18 8月, 2014 9 次提交
-
-
由 Imre Deak 提交于
Atm we may retrain the DP link even if the CRTC is inactive through HPD work->intel_dp_check_link_status(). This in turn can lock up the PHY (at least on BYT), since the DP port is disabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81948Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org (3.16+) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Imre Deak 提交于
Atm we may leave eDP VDD enabled during system suspend after the CRTCs are disabled through an HPD->DPCD read event. So disable VDD during suspend at a point when no HPDs can occur. Note that runtime suspend doesn't have the same problem, since there the RPM ref held by VDD provides already the needed serialization. v2: - add note to commit message about the runtime suspend path (Ville) - use edp_panel_vdd_off_sync(), so we can keep the WARN in edp_panel_vdd_off() (Ville) v3: - rebased on -fixes (for_each_intel_encoder()->list_for_each_entry()) (Imre) Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2) Cc: stable@vger.kernel.org (3.16+) [Jani: fix sparse warning reported by Fengguang Wu] Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Imre Deak 提交于
Make sure these work handlers don't run after we system suspend or unload the driver. Note that we don't cancel the handlers during runtime suspend. That could lead to a lockup, since we take a runtime PM ref from the handlers themselves. Fortunaltely canceling there is not needed since the RPM ref itself provides for the needed serialization. v2: - fix the order of canceling dig_port_work wrt. hotplug_work (Ville) - zero out {long,short}_hpd_port_mask and hpd_event_bits for speed (Ville) Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org (3.16+) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Imre Deak 提交于
Atm, the HPD IRQ reenable timer can get rearmed right after it's canceled. Also to access the HPD IRQ mask registers we need to wake up the HW. Solve both issues by converting the reenable timer to a delayed work and grabbing a runtime PM reference in the work. By this we can also forgo canceling the timer during runtime suspend, since the only important thing there is that the HW is awake when we write the registers and that's ensured by the RPM ref. So do the cancelation only during driver unload time; this is also a requirement for an upcoming patch where we want to cancel all HPD related works only during system suspend and driver unload time, but not during runtime suspend. Note that there is still a race between the HPD IRQ reenable work and drm_irq_uninstall() during driver unload, where the work can reenable the HPD IRQs disabled by drm_irq_uninstall(). This isn't a problem since the HPD IRQs will still be effectively masked by the first level interrupt mask. v2-3: - unchanged v4: - use proper API for changing the expiration time for an already pending delayed work (Jani) Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2) Cc: stable@vger.kernel.org (3.16+) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Imre Deak 提交于
Ville noticed that we can call ibx_digital_port_connected() which accesses the HW without holding any power well/runtime pm reference. Fix this by holding a display port power domain reference around the whole hpd_pulse handler. Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org (3.16+) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
radeon fixes for 3.17, kind of all over the place (dpm, GPUVM, etc.) * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Remove duplicate include from Makefile drm/radeon/dpm: select the appropriate vce power state for KV/KB/ML drm/radeon: Add ability to get and change dpm state when radeon PX card is turned off drm/radeon: Add missing lines to ci_set_thermal_temperature_range drm/radeon: Always flush VM again on < CIK drm/radeon: add a check for allocation failure (v2) drm/radeon: use pfp for all vm_flush related updates drm/radeon: add bapm module parameter
-
由 Ville Syrjälä 提交于
Make sure the cursor gets fully clipped when enabling it on a disabled crtc via setplane. This will prevent the lower level code from attempting to enable the cursor in hardware. Cc: Paulo Zanoni <przanoni@gmail.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ville Syrjälä 提交于
During suspend we turn off the crtcs, but leave the staged config in place so that we can restore the display(s) to their previous state on resume. During resume when we attempt to apply the force pipe A quirk we use the load detect mechanism. That doesn't check whether there was an already staged configuration for the crtc since that's not even possible during normal runtime load detection. But during resume it is possible, and if we just blindly go and overwrite the staged crtc configuration for the load detection we can no longer restore the display to the correct state. Even worse, we don't even clear all the staged connector->encoder->crtc links so we may end up using a cloned setup for the load detection, and after we're done we just clear the links related to the VGA output leaving the links for the other outputs in place. This will eventually result in calling intel_set_mode() with mode==NULL but with valid connector->encoder->crtc links which will result in dereferencing the NULL mode since the code thinks it will have to a modeset. To avoid these problems don't use any crtc with new_enabled==true for load detection. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org (for 3.16) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ville Syrjälä 提交于
intel_enable_pipe_a() gets called with all the modeset locks already held (by drm_modeset_lock_all()), so trying to grab the same locks using another drm_modeset_acquire_ctx is going to fail miserably. Move most of the drm_modeset_acquire_ctx handling (init/drop/fini) out from intel_{get,release}_load_detect_pipe() into the callers (intel_{crt,tv}_detect()). Only the actual locking and backoff handling is left in intel_get_load_detect_pipe(). And in intel_enable_pipe_a() we just share the mode_config.acquire_ctx from drm_modeset_lock_all() which is already holding all the relevant locks. It's perfectly legal to lock the same ww_mutex multiple times using the same ww_acquire_ctx. drm_modeset_lock() will convert the returned -EALREADY into 0, so the caller doesn't need to do antyhing special. Fixes a hang on resume on my 830. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 17 8月, 2014 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 16 8月, 2014 18 次提交
-
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Matthew Garrett: "A moderate number of changes, but nothing awfully significant. A lot of const cleanups, some reworking and additions to the rfkill quirks in the asus driver, a new driver for generating falling laptop events on Toshibas and some misc fixes. Maybe vendors have stopped inventing things" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits) platform/x86: Enable build support for toshiba_haps Documentation: Add file about toshiba_haps module platform/x86: Toshiba HDD Active Protection Sensor asus-nb-wmi: Add wapf4 quirk for the U32U alienware-wmi: make hdmi_mux enabled on case-by-case basis ideapad-laptop: Constify DMI table and other r/o variables asus-nb-wmi.c: Rename x401u quirk to wapf4 compal-laptop: correct invalid hwmon name toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list toshiba_acpi: Add extra check to backlight code Fix log message about future removal of interface ideapad-laptop: Disable touchpad interface on Yoga models asus-nb-wmi: Add wapf4 quirk for the X550CC intel_ips: Make ips_mcp_limits variables static thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst hp-wmi: Add missing __init annotations to initialization code hp_accel: Constify ACPI and DMI tables fujitsu-tablet: Mark DMI callbacks as __init code dell-laptop: Mark dell_quirks[] DMI table as __initconst ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module fix from Rusty Russell: "Nasty potential bug if someone uses a known module param with an invalid value (we don't fail unknown module params any more, just warn)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Clean up ro/nx after early module load failures
-
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio由 Linus Torvalds 提交于
Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs updates from Chris Mason: "These are all fixes I'd like to get out to a broader audience. The biggest of the bunch is Mark's quota fix, which is also in the SUSE kernel, and makes our subvolume quotas dramatically more accurate. I've been running xfstests with these against your current git overnight, but I'm queueing up longer tests as well" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: disable strict file flushes for renames and truncates Btrfs: fix csum tree corruption, duplicate and outdated checksums Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch Btrfs: fix compressed write corruption on enospc btrfs: correctly handle return from ulist_add btrfs: qgroup: account shared subtrees during snapshot delete Btrfs: read lock extent buffer while walking backrefs Btrfs: __btrfs_mod_ref should always use no_quota btrfs: adjust statfs calculations according to raid profiles
-
git://git.samba.org/jlayton/linux由 Linus Torvalds 提交于
Pull file locking bugfixes from Jeff Layton: "Most of these patches are to fix a long-standing regression that crept in when the BKL was removed from the file-locking code. The code was converted to use a conventional spinlock, but some fl_release_private ops can block and you can end up sleeping inside the lock. There's also a patch to make /proc/locks show delegations as 'DELEG'" * tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux: locks: update Locking documentation to clarify fl_release_private behavior locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped locks: don't reuse file_lock in __posix_lock_file locks: don't call locks_release_private from locks_copy_lock locks: show delegations as "DELEG" in /proc/locks
-
git://git.kvack.org/~bcrl/aio-next由 Linus Torvalds 提交于
Pull aio updates from Ben LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: use iovec array rather than the single one aio: fix some comments aio: use the macro rather than the inline magic number aio: remove the needless registration of ring file's private_data aio: remove no longer needed preempt_disable() aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx() aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()
-
由 Azael Avalos 提交于
Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
This patch provides information about the Toshiba HDD Active Protection Sensor driver module toshiba_haps. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
This driver adds support for the built-in accelereometer found on recent Toshiba laptops with HID TOS620A. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and reseting the HDD protection interface. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mario Limonciello 提交于
Not all HW supporting WMAX method will support the HDMI mux feature. Explicitly quirk the HW that does support it. Signed-off-by: NMario Limonciello <mario_limonciello@dell.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Mathias Krause 提交于
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table and the ideapad_attribute_group attribute group. There's no need to have them writeable during runtime. Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Ike Panhc <ike.pan@canonical.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Hans de Goede 提交于
The actual x401u does not use the so named x401u quirk but the x55u quirk. All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to stop the confusion. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Roald Frederickx 提交于
Change the name of the hwmon interface from "compal-laptop" to "compal". A dash is an invalid character for a hwmon name and caused the call to hwmon_device_register_with_groups() to fail. Signed-off-by: NRoald Frederickx <roald.frederickx@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
The Toshiba Qosmio X75-A series models also come with the new keymap layout. This patch adds this model to the alt_keymap_dmi list, along with an extra key found on these models. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Azael Avalos 提交于
Some Toshiba models (most notably Qosmios) come with an incomplete backlight method where the AML code doesn't check for write or read commands and always returns HCI_SUCCESS and the actual brightness (and in some cases the max brightness), thus allowing the backlight interface to be registered without write support. This patch changes the set_lcd_brightness function, checking the returned values for values greater than zero to avoid registering a broken backlight interface. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
由 Martin Kepplinger 提交于
If this is going away, it won't be in 2012. Signed-off-by: NMartin Kepplinger <martink@posteo.de> Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
-