- 25 1月, 2012 40 次提交
-
-
由 Antonio Quartulli 提交于
In case of a node re-joining the cell the sta_info structure belonging to it is first destroyed and then reinserted. In this way its internal state is reset. The joining operation is recognised thank the Auth frame being received. This operation is helpful in case of a node being rebooted that is joining the ad-hoc cell again, before its purge timeout on other nodes expires. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Antonio Quartulli 提交于
In IBSS mode, whenever a new station is added a 2-way authentication challenge is performed. Actually this event can be used to recognise a new station joining the cell even if its sta_info entry is already in the list. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
Free sk_buff if nfcwilink_send fails. Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
Download TI NFC init script during nfcwilink open operation, after the NFC channel is registered with TI shared transport. TI NFC init script is written in BTS format. First, read the chip version via a special vendor specific command. Second, we request the relevant BTS file from the user space, and then send the BTS commands to the chip. Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
Add endian annotations to TI nfcwilink driver. Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
Add NCI data exchange timer to catch timeouts, and call the data exchange callback with an error. Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
It seems exceedingly unlikely that we'll ever support swapping rate control algorithms at runtime, so remove the unused refcounting code. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Yogesh's patch to destroy aggregation sessions when stations are destroyed was needed, but unnecessarily complex. Clean up this code. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
Export new attributes sensb_res for tech B and sensf_res for tech F in the target info (returned as a response to NFC_CMD_GET_TARGET). The max size of the attributes nfcid1, sensb_res and sensf_res is exported to user space though include/linux/nfc. Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Convert printks to pr_<level> Prefix logging with pr_fmt. Use ##__VA_ARGS__ in some WL_ logging macros. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Convert a couple of pr_debug/print_hex_dump to the standard utility. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Use pr_debug to allow dynamic debugging to work. Move an #endif to allow brcmf_dbg_hex_dump to be outside the #if/#endif block. Move a const char* declaration to be inside a pr_debug so the function doesn't need a #if/#endif block. Don't use temporaries in debugging functions so the code can be optimized away. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
This doesn't do anything anymore. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Reduce the number of #ifdef DEBUG uses by adding a dbg_hex_dump routine which has the appropriate #ifdef DEBUG test. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Allow dynamic debugging. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Current CONFIG_BRCMDBG flag when enabled does not necessarily enable proper pr_debug output when DEBUG is not also enabled. Remove BCMDBG define and just use DEBUG instead. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Antonio Quartulli 提交于
Disable group keys programming when using IBSS RSN. Keys will be managed using software. In this way IBSS RSN can correctly work. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
In the early days, this was a quite useful software feature for testing different regdomains and chain configurations without adding debugfs cruft into the driver. Nowadays, the driver's phy code seems to be stable and there's no need for it anymore. Therefore I decided to removed altogether. Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Antonio Quartulli 提交于
Actually the DA field has already been checked along the rx path (in prepare_for_handlers()) and this check is therefore useless at this point. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
Currently mwifiex_private pointers are derived from wiphy structures. This will always work as long as there is only one net_device associated with one wiphy. In scenarios where there are multiple net_devices associated with single wiphy, one should use net_device to derive the priv. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
Current implementation, for retrieving priv from adapter, uses bss_index. In multi interface environment supporting different types, bss_index may not be unique. Use bss_type along with bss_num to retrieve the priv. bss_index is removed with this change. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The SPROM location has been relocated again for some devices. This patch will log the offset when CONFIG_BCMA_DEBUG has been selected. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hong Wu 提交于
The local maximum transmit power for a channel is defined as the maximum regulatory transmission power minus the local power constraint specified for the channel in the Power Constraint element. (7.3.2.15 IEEE80211 2007) Signed-off-by: NHong Wu <hong.wu@dspg.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hong Wu 提交于
wireless: Save original maximum regulatory transmission power for the calucation of the local maximum transmit power The local maximum transmit power is the maximum power a wireless device allowed to transmit. If Power Constraint is presented, the local maximum power equals to the maximum allowed power defined in regulatory domain minus power constraint. The maximum transmit power is maximum power a wireless device capable of transmitting, and should be used in Power Capability element (7.3.2.16 IEEE802.11 2007). The transmit power from a wireless device should not greater than the local maximum transmit power. The maximum transmit power was not calculated correctly in the current Linux wireless/mac80211 when Power Constraint is presented. Signed-off-by: NHong Wu <hong.wu@dspg.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Nicolas Cavallari 提交于
On carl9170, HW encryption is disabled on IBSS; the mac80211 software-based encryption is used instead. As mac80211 supports IBSS RSN (per-STA GTK), claim its support in the carl9170 PHY. Signed-off-by: NNicolas Cavallari <cavallar@lri.fr> Acked-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Antonio Quartulli 提交于
In case of authentication frame exchange between two IBSS STAs, the DA field must contain the destinatioin address (instead of the BSSID). Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Use a switch statement instead of a list of if statements. Also include AP_VLAN in the list and skip them since the AP interface will also be looked at. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
The function is called with locks held and thus should not use GFP_KERNEL. The semantic patch that makes this report is available in scripts/coccinelle/locks/call_kern.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr> Acked-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
Increase NCI deactivate timeout from 5 sec to 30 sec. NCI deactivate procedure might take a long time, depending on the local and remote parameters. Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
If a target was active, complete the NCI deactivate request only in deactivate_ntf. Otherwise, complete it at deactivate_rsp. Deactivate_ntf represents the actual disconnection event (sent from the NCI controller). Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The original driver contained some conditional code that was not selected, but was not deleted in case it would be used later. That code can now be removed. Reported-by: NJoe Perches <joe@perches.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In https://bugzilla.redhat.com/show_bug.cgi?id=771656, a kernel bug was triggered due to a failed skb allocation that was not checked. This event lead to an audit of all memory allocations in the complete rtlwifi family of drivers. This patch fixes the rest. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohammed Shafi Shajakhan 提交于
we would have bailed out if 'ifibss->fixed_channel' is valid i.e. we had used 'fixed-freq' parameter in iw ibss join command. this is with the state 'IEEE80211_IBSS_MLME_JOINED' so no need to check for it Signed-off-by: NMohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-