This patch implements the VMPTRST instruction.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch implements the VMPTRLD instruction.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch implements the VMCLEAR instruction.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

VMX instructions specify success or failure by setting certain RFLAGS bits.
This patch contains common functions to do this, and they will be used in
the following patches which emulate the various VMX instructions.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

In this patch we add to vmcs12 (the VMCS that L1 keeps for L2) all the
standard VMCS fields.

Later patches will enable L1 to read and write these fields using VMREAD/
VMWRITE, and they will be used during a VMLAUNCH/VMRESUME in preparing vmcs02,
a hardware VMCS for running L2.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We saw in a previous patch that L1 controls its L2 guest with a vcms12.
L0 needs to create a real VMCS for running L2. We call that "vmcs02".
A later patch will contain the code, prepare_vmcs02(), for filling the vmcs02
fields. This patch only contains code for allocating vmcs02.

In this version, prepare_vmcs02() sets *all* of vmcs02's fields each time we
enter from L1 to L2, so keeping just one vmcs02 for the vcpu is enough: It can
be reused even when L1 runs multiple L2 guests. However, in future versions
we'll probably want to add an optimization where vmcs02 fields that rarely
change will not be set each time. For that, we may want to keep around several
vmcs02s of L2 guests that have recently run, so that potentially we could run
these L2s again more quickly because less vmwrites to vmcs02 will be needed.

This patch adds to each vcpu a vmcs02 pool, vmx->nested.vmcs02_pool,
which remembers the vmcs02s last used to run up to VMCS02_POOL_SIZE L2s.
As explained above, in the current version we choose VMCS02_POOL_SIZE=1,
I.e., one vmcs02 is allocated (and loaded onto the processor), and it is
reused to enter any L2 guest. In the future, when prepare_vmcs02() is
optimized not to set all fields every time, VMCS02_POOL_SIZE should be
increased.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch includes a utility function for decoding pointer operands of VMX
instructions issued by L1 (a guest hypervisor)
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When the guest can use VMX instructions (when the "nested" module option is
on), it should also be able to read and write VMX MSRs, e.g., to query about
VMX capabilities. This patch adds this support.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

An implementation of VMX needs to define a VMCS structure. This structure
is kept in guest memory, but is opaque to the guest (who can only read or
write it with VMX instructions).

This patch starts to define the VMCS structure which our nested VMX
implementation will present to L1. We call it "vmcs12", as it is the VMCS
that L1 keeps for its L2 guest. We will add more content to this structure
in later patches.

This patch also adds the notion (as required by the VMX spec) of L1's "current
VMCS", and finally includes utility functions for mapping the guest-allocated
VMCSs in host memory.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch allows the guest to enable the VMXE bit in CR4, which is a
prerequisite to running VMXON.

Whether to allow setting the VMXE bit now depends on the architecture (svm
or vmx), so its checking has moved to kvm_x86_ops->set_cr4(). This function
now returns an int: If kvm_x86_ops->set_cr4() returns 1, __kvm_set_cr4()
will also return 1, and this will cause kvm_set_cr4() will throw a #GP.

Turning on the VMXE bit is allowed only when the nested VMX feature is
enabled, and turning it off is forbidden after a vmxon.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch allows a guest to use the VMXON and VMXOFF instructions, and
emulates them accordingly. Basically this amounts to checking some
prerequisites, and then remembering whether the guest has enabled or disabled
VMX operation.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch adds to kvm_intel a module option "nested". This option controls
whether the guest can use VMX instructions, i.e., whether we allow nested
virtualization. A similar, but separate, option already exists for the
SVM module.

This option currently defaults to 0, meaning that nested VMX must be
explicitly enabled by giving nested=1. When nested VMX matures, the default
should probably be changed to enable nested VMX by default - just like
nested SVM is currently enabled by default.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

During tracing the emulator, we noticed that init_emulate_ctxt()
sometimes took a bit longer time than we expected.

This patch is for mitigating the problem by some degree.

By looking into the function, we soon notice that it clears the whole
decode_cache whose size is about 2.5K bytes now.  Furthermore, most of
the bytes are taken for the two read_cache arrays, which are used only
by a few instructions.

Considering the fact that we are not assuming the cache arrays have
been cleared when we store actual data, we do not need to clear the
arrays: 2K bytes elimination.  In addition, we can avoid clearing the
fetch_cache and regs arrays.

This patch changes the initialization not to clear the arrays.

On our 64-bit host, init_emulate_ctxt() becomes 0.3 to 0.5us faster with
this patch applied.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use a local pointer to the emulate_ctxt for simplicity.  Then, arrange
the hard-to-read mode selection lines neatly.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

So far kvm_arch_vcpu_setup is responsible for freeing the vcpu struct if
it fails. Move this confusing resonsibility back into the hands of
kvm_vm_ioctl_create_vcpu. Only kvm_arch_vcpu_setup of x86 is affected,
all other archs cannot fail.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In VMX, before we bring down a CPU we must VMCLEAR all VMCSs loaded on it
because (at least in theory) the processor might not have written all of its
content back to memory. Since a patch from June 26, 2008, this is done using
a per-cpu "vcpus_on_cpu" linked list of vcpus loaded on each CPU.

The problem is that with nested VMX, we no longer have the concept of a
vcpu being loaded on a cpu: A vcpu has multiple VMCSs (one for L1, a pool for
L2s), and each of those may be have been last loaded on a different cpu.

So instead of linking the vcpus, we link the VMCSs, using a new structure
loaded_vmcs. This structure contains the VMCS, and the information pertaining
to its loading on a specific cpu (namely, the cpu number, and whether it
was already launched on this cpu once). In nested we will also use the same
structure to hold L2 VMCSs, and vmx->loaded_vmcs is a pointer to the
currently active VMCS.
Signed-off-by: NNadav Har'El <nyh@il.ibm.com>
Acked-by: NAcked-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of blacklisting known-unsupported cpuid leaves, whitelist known-
supported leaves.  This is more conservative and prevents us from reporting
features we don't support.  Also whitelist a few more leaves while at it.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Acked-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Introduce drop_parent_pte to remove the rmap of parent pte and
clear parent pte
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Cleanup the same operation between kvm_mmu_page_unlink_children and
mmu_pte_write_zap_pte
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Parent pte rmap and page rmap are very similar, so use the same arithmetic
for them
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Abstract the operation of rmap to spte_list, then we can use it for the
reverse mapping of parent pte in the later patch
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Fix:

 warning: ‘cs_sel’ may be used uninitialized in this function
 warning: ‘ss_sel’ may be used uninitialized in this function
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Simply use __copy_to_user/__clear_user to write guest page since we have
already verified the user address when the memslot is set
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Simply return from kvm_mmu_pte_write path if no shadow page is
write-protected, then we can avoid to walk all shadow pages and hold
mmu-lock
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

vmcs_readl() and friends are really short, but gcc thinks they are long because of
the out-of-line exception handlers.  Mark them always_inline to clear the
misunderstanding.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We clean up a failed VMREAD by clearing the output register.  Do
it in the exception handler instead of unconditionally.  This is
worthwhile since there are more than a hundred call sites.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Dereference it in the actual users.

This not only cleans up the emulator but also makes it easy to convert
the old emulation functions to the new em_xxx() form later.

Note: Remove some inline keywords to let the compiler decide inlining.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Dereference it in the actual users: only do_insn_fetch_byte().

This is consistent with the way __linearize() dereferences it.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The two macros need special care to use:
  Assume rc, ctxt, ops and done exist outside of them.
  Can goto outside.

Considering the fact that these are used only in decode functions,
moving these right after do_insn_fetch() seems to be a right thing
to improve the readability.

We also rename do_fetch_insn_byte() to do_insn_fetch_byte() to be
consistent.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio: tps65910: add missing breaks in tps65910_gpio_init

All the blkio.throttle.* file names are incorrectly reported without
".throttle" in the documentation. Fix it.
Signed-off-by: NAndrea Righi <andrea@betterlinux.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The list of available general purpose memory allocators in
Documentation/CodingStyle chapter 14 is incomplete. This patch adds
the missing vzalloc() to the list.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move location of quilt series for kernel-doc patches.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (46 commits)
  [media] rc: call input_sync after scancode reports
  [media] imon: allow either proto on unknown 0xffdc
  [media] imon: auto-config ffdc 7e device
  [media] saa7134: fix raw IR timeout value
  [media] rc: fix ghost keypresses with certain hw
  [media] [staging] lirc_serial: allocate irq at init time
  [media] lirc_zilog: fix spinning rx thread
  [media] keymaps: fix table for pinnacle pctv hd devices
  [media] ite-cir: 8709 needs to use pnp resource 2
  [media] V4L: mx1-camera: fix uninitialized variable
  [media] omap_vout: Added check in reqbuf & mmap for buf_size allocation
  [media] OMAP_VOUT: Change hardcoded device node number to -1
  [media] OMAP_VOUTLIB: Fix wrong resizer calculation
  [media] uvcvideo: Disable the queue when failing to start
  [media] uvcvideo: Remove buffers from the queues when freeing
  [media] uvcvideo: Ignore entities for terminals with no supported format
  [media] v4l: Don't access media entity after is has been destroyed
  [media] media: omap3isp: fix a potential NULL deref
  [media] media: vb2: fix allocation failure check
  [media] media: vb2: reset queued_count value during queue reinitialization
  ...

Fix up trivial conflict in MAINTAINERS as per Mauro

The shdr4extnum variable isn't being freed in the cleanup process of
elf_fdpic_core_dump().
Signed-off-by: NDavidlohr Bueso <dave@gnu.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provides the ability to resize a resource that is already allocated.
This functionality is put in place to support reallocation needs of
pci resources.
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

locks_alloc_lock() assumed that the allocated struct file_lock is
already initialized to zero members.  This is only true for the first
allocation of the structure, after reuse some of the members will have
random values.

This will for example result in passing random fl_start values to
userspace in fuse for FL_FLOCK locks, which is an information leak at
best.

Fix by reinitializing those members which may be non-zero after freeing.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fix regression occurring during device removal
  USB: fsl_udc_core: fix build breakage when building for ARM arch