- 22 3月, 2012 2 次提交
-
-
由 Bob Moore 提交于
This change expands acpi_os_read_memory and acpi_os_write_memory to a full 64 bits. This allows 64 bit transfers via the acpi_read and acpi_write interfaces. Note: The internal acpi_hw_read and acpi_hw_write interfaces remain at 32 bits, because 64 bits is not needed to access the standard ACPI registers. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Add ACPI_REDUCED_HARDWARE flag that removes all hardware-related code (about 10% code, 5% static data). Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 17 1月, 2012 1 次提交
-
-
由 Bob Moore 提交于
Update all copyrights to 2012. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 07 11月, 2011 1 次提交
-
-
由 Rakib Mullick 提交于
Calling pm-suspend might trigger a recursive lock in it's code path. In function acpi_hw_clear_acpi_status, acpi_os_acquire_lock holds the lock acpi_gbl_hardware_lock before calling acpi_hw_register_write(), then without releasing acpi_gbl_hardware_lock, this function calls acpi_ev_walk_gpe_list, which tries to hold acpi_gbl_gpe_lock. Both acpi_gbl_hardware_lock and acpi_gbl_gpe_lock are at same lock-class and which might cause lock recursion deadlock. Following patch fixes this scenario by just releasing acpi_gbl_hardware_lock before calling acpi_ev_walk_gpe_list. Changes since v0(https://lkml.org/lkml/2011/9/21/355): - Fix changelog, thanks to Lin Ming. Changes since v1 (https://lkml.org/lkml/2011/11/3/89): - Update changelog and rename goto label, courtesy Srivatsa S. Bhat. Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com> Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 19 1月, 2011 1 次提交
-
-
由 Bob Moore 提交于
Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 20 4月, 2010 1 次提交
-
-
由 Bob Moore 提交于
Always use 0x prefix for hex output, use %u for integer output (all integers are unsigned.) Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 23 1月, 2010 1 次提交
-
-
由 Bob Moore 提交于
Add 2010 copyright to all module headers and signons, including the Linux header. This affects virtually every file in the ACPICA core subsystem, iASL compiler, and all utilities. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 27 8月, 2009 1 次提交
-
-
由 Bob Moore 提交于
Needed by drivers for new ACPi tables. Internal versions of these functions still use 32-bit max transfers, in order to minimize disruption and stack use for the standard ACPI registers (FADT-based). Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 27 5月, 2009 1 次提交
-
-
由 Bob Moore 提交于
Mostly for acpiexec, one in the core subsystem. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 28 3月, 2009 4 次提交
-
-
由 Lin Ming 提交于
Affects PM1 Control register only. When reading the register, zero the write-only bits as per the ACPI spec. ACPICA BZ 443. Lin Ming. http://www.acpica.org/bugzilla/show_bug.cgi?id=443Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Protect certain I/O ports from reads/writes. Provides MS compatibility. New module, hwvalid.c Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
As per the ACPI specification, preserve (read/modify/write) all bits that are defined as either reserved or ignored (PM control control registers only.) Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Ignored bits must be preserved according to the ACPI spec. Usually this means a read/modify/write when writing to the register. However, for status registers, writing a one means clear the event. Writing a zero means preserve the event (do not clear.) This behavior is clarified in the ACPI 4.0 spec, and the ACPICA code now simply always writes a zero to the ignored bit. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 27 3月, 2009 5 次提交
-
-
由 Bob Moore 提交于
Added acpi_hw_write_pm1_control. This function writes both of the PM1 control registers (A/B). These registers are different than than the PM1 A/B status and enable registers in that different values can be written to the A/B registers. Most notably, the SLP_TYP bits can be different, as per the values returned from the _Sx predefined methods. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
The PM1B registers are mirrors of the PM1A registers with different bits actually implemented. From the ACPI specification: "Although the bits can be split between the two register blocks (each register block has a unique pointer within the FADT), the bit positions are maintained. The register block with unimplemented bits (that is, those implemented in the other register block) always returns zeros, and writes have no side effects" Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
This function was writing an optional PM1B status register twice. The existing call to the low-level acpi_hw_register_write automatically handles a possibly split PM1 A/B register. ACPICA BZ 751. http://www.acpica.org/bugzilla/show_bug.cgi?id=751Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
On read, shift B register bits above the A bits. On write, shift B bits down to zero before writing the B register. New: acpi_hw_read_multiple, acpi_hw_write_multiple. These two functions now transparently handle the (possible) split registers for PM1 Status, Enable, and Control. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Add new globals for the PM1 status registers (A/B), similar to the way the PM1 enable registers are handled. Instead of overloading the FADT Event Register blocks. This makes the code clearer and less prone to error. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 09 1月, 2009 2 次提交
-
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
also, delete sleep/ and delete ACPI_CFLAGS from Makefile Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 31 12月, 2008 4 次提交
-
-
由 Bob Moore 提交于
acpi.h now includes only the "public" acpica headers. All other acpica headers are "private" and should not be included by acpica users. One new file, accommon.h is used to include the commonly used private headers for acpica code generation. Future plans are to move all private headers to a new subdirectory. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Move public interfaces from hwregs.c to new file, hwxface.c - similar to the structure of the other ACPICA components. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Changed the acpi_hw_low_level_read and acpi_hw_low_level_write functions to the public acpi_read and acpi_write to allow direct access to ACPI registers. Removed the "width" parameter since the width can be obtained from the input GAS structure. Updated the FADT initialization to setup the GAS structures with the proper widths. Some widths are still hardcoded because many FADTs have incorrect register lengths. Signed-off-by: Bob Moore <robert.moore@intel.com Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
This function maps an input GPE index to a GPE block device. Also Added acpi_current_gpe_count to track the current number of GPEs that are being managed by the ACPICA core (both FADT-based GPEs and the GPEs contained in GPE block devices.) Modify drivers/acpi/system.c to use these 2 new interfaces Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 24 4月, 2008 1 次提交
-
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 10 10月, 2007 1 次提交
-
-
由 Alexey Starikovskiy 提交于
use_lock flag is used once for acpi_hw_register_read, and never for acpi_hw_register_write. It will greatly simplify understanding of locking if we just drop this use_lock altogether, and wrap the only call to ..._read in lock/unlock. Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 03 2月, 2007 4 次提交
-
-
由 Bob Moore 提交于
Added 2007 copyright to all module headers and signons. This affects virtually every file in the ACPICA core subsystem, iASL compiler, and the utilities. Signed-off-by: NAlexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Support for 16-bit ACPICA has been completely removed since it is no longer necessary and it clutters the code. All 16-bit macros, types, and conditional compiles have been removed, cleaning up and simplifying the code across the entire subsystem. DOS support is no longer needed since the Linux firmware kit is now available. Signed-off-by: NAlexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Remove flags parameter for acpi_{get,set}_register(). It is no longer necessary now that these functions use a spinlock for mutual exclusion. Signed-off-by: NAlexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
The Table Manager component has been completely redesigned and reimplemented. The new design is much simpler, and reduces the overall code and data size of the kernel-resident ACPICA by approximately 5%. Also, it is now possible to obtain the ACPI tables very early during kernel initialization, even before dynamic memory management is initialized. Signed-off-by: NAlexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 11 10月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
This is needed by at least the Mac Mini's, which (incorrectly) come back from suspend with SCI_EN clear. Thanks to Frdric Riss for hunting this down. Acked-by: NFrdric Riss <frederic.riss@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 6月, 2006 1 次提交
-
-
由 Bob Moore 提交于
Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 14 6月, 2006 3 次提交
-
-
由 Bob Moore 提交于
Converted the locking mutex used for the ACPI hardware to a spinlock. This change should eliminate all problems caused by attempting to acquire a semaphore at interrupt level, and it means that all ACPICA external interfaces that directly access the ACPI hardware can be safely called from interrupt level. Fixed a regression introduced in 20060526 where the ACPI device initialization could be prematurely aborted with an AE_NOT_FOUND if a device did not have an optional _INI method. Fixed an IndexField issue where a write to the Data Register should be limited in size to the AccessSize (width) of the IndexField itself. (BZ 433, Fiodor Suietov) Fixed problem reports (Valery Podrezov) integrated: - Allow store of ThermalZone objects to Debug object. http://bugzilla.kernel.org/show_bug.cgi?id=5369 http://bugzilla.kernel.org/show_bug.cgi?id=5370 Fixed problem reports (Fiodor Suietov) integrated: - acpi_get_table_header() doesn't handle multiple instances correctly (BZ 364) Removed four global mutexes that were obsolete and were no longer being used. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Restructured, flattened, and simplified the internal interfaces for namespace object evaluation - resulting in smaller code, less CPU stack use, and fewer interfaces. (With assistance from Mikhail Kouzmich) Fixed a problem with the CopyObject operator where the first parameter was not typed correctly for the parser, interpreter, compiler, and disassembler. Caused various errors and unexpected behavior. Fixed a problem where a ShiftLeft or ShiftRight of more than 64 bits produced incorrect results with some C compilers. Since the behavior of C compilers when the shift value is larger than the datatype width is apparently not well defined, the interpreter now detects this condition and simply returns zero as expected in all such cases. (BZ 395) Fixed problem reports (Valery Podrezov) integrated: - Update String-to-Integer conversion to match ACPI 3.0A spec http://bugzilla.kernel.org/show_bug.cgi?id=5329 Allow interpreter to handle nested method declarations http://bugzilla.kernel.org/show_bug.cgi?id=5361 Fixed problem reports (Fiodor Suietov) integrated: - acpi_terminate() doesn't free debug memory allocation list objects (BZ 355) - After Core Subsystem shutdown, acpi_subsystem_status() returns AE_OK (BZ 356) - acpi_os_unmap_memory() for RSDP can be invoked inconsistently (BZ 357) - Resource Manager should return AE_TYPE for non-device objects (BZ 358) - Incomplete cleanup branch in AcpiNsEvaluateRelative (BZ 359) - Use acpi_os_free() instead of ACPI_FREE in acpi_rs_set_srs_method_data (BZ 360) - Incomplete cleanup branch in acpi_ps_parse_aml (BZ 361) - Incomplete cleanup branch in acpi_ds_delete_walk_state (BZ 362) - acpi_get_table_header returns AE_NO_ACPI_TABLES until DSDT is loaded (BZ 365) - Status of the Global Initialization Handler call not used (BZ 366) - Incorrect object parameter to Global Initialization Handler (BZ 367) Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bob Moore 提交于
Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 01 4月, 2006 1 次提交
-
-
由 Bob Moore 提交于
Tagged all external interfaces to the subsystem with the new ACPI_EXPORT_SYMBOL macro. This macro can be defined as necessary to assist kernel integration. For Linux, the macro resolves to the EXPORT_SYMBOL macro. The default definition is NULL. Added the ACPI_THREAD_ID type for the return value from acpi_os_get_thread_id(). This allows the host to define this as necessary to simplify kernel integration. The default definition is ACPI_NATIVE_UINT. Valery Podrezov fixed two interpreter problems related to error processing, the deletion of objects, and placing invalid pointers onto the internal operator result stack. http://bugzilla.kernel.org/show_bug.cgi?id=6028 http://bugzilla.kernel.org/show_bug.cgi?id=6151 Increased the reference count threshold where a warning is emitted for large reference counts in order to eliminate unnecessary warnings on systems with large namespaces (especially 64-bit.) Increased the value from 0x400 to 0x800. Due to universal disagreement as to the meaning of the 'c' in the calloc() function, the ACPI_MEM_CALLOCATE macro has been renamed to ACPI_ALLOCATE_ZEROED so that the purpose of the interface is 'clear'. ACPI_MEM_ALLOCATE and ACPI_MEM_FREE are renamed to ACPI_ALLOCATE and ACPI_FREE. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 31 3月, 2006 1 次提交
-
-
由 Bob Moore 提交于
Removed a couple of extraneous ACPI_ERROR messages that appeared during normal execution. These became apparent after the conversion from ACPI_DEBUG_PRINT. Fixed a problem where the CreateField operator could hang if the BitIndex or NumBits parameter referred to a named object. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5359 Fixed a problem where a DeRefOf operation on a buffer object incorrectly failed with an exception. This also fixes a couple of related RefOf and DeRefOf issues. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5360 http://bugzilla.kernel.org/show_bug.cgi?id=5387 http://bugzilla.kernel.org/show_bug.cgi?id=5392 Fixed a problem where the AE_BUFFER_LIMIT exception was returned instead of AE_STRING_LIMIT on an out-of-bounds Index() operation. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5480 Implemented a memory cleanup at the end of the execution of each iteration of an AML While() loop, preventing the accumulation of outstanding objects. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5427 Eliminated a chunk of duplicate code in the object resolution code. From Valery Podrezov. http://bugzilla.kernel.org/show_bug.cgi?id=5336 Fixed several warnings during the 64-bit code generation. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 31 1月, 2006 1 次提交
-
-
由 Bob Moore 提交于
Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 20 1月, 2006 1 次提交
-
-
由 Bob Moore 提交于
Added 2006 copyright. At SuSE's suggestion, enabled all error messages without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros, respectively. This preserves all error and warning messages in the non-debug version of the ACPICA code (this has been referred to as the "debug lite" option.) Over 200 cases were converted to create a total of over 380 error/warning messages across the ACPICA code. This increases the code and data size of the default non-debug version by about 13K. Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages. The size of the debug version remains about the same. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 28 12月, 2005 1 次提交
-
-
由 Bob Moore 提交于
Implemented optional support to allow unresolved names within ASL Package objects. A null object is inserted in the package when a named reference cannot be located in the current namespace. Enabled via the interpreter slack flag which Linux has enabled by default (acpi=strict to disable slack). This should eliminate AE_NOT_FOUND exceptions seen on machines that contain such code. Implemented an optimization to the initialization sequence that can improve boot time. During ACPI device initialization, the _STA method is now run if and only if the _INI method exists. The _STA method is used to determine if the device is present; An _INI can only be run if _STA returns present, but it is a waste of time to run the _STA method if the _INI does not exist. (Prototype and assistance from Dong Wei) Implemented use of the C99 uintptr_t for the pointer casting macros if it is available in the current compiler. Otherwise, the default (void *) cast is used as before. Fixed some possible memory leaks found within the execution path of the Break, Continue, If, and CreateField operators. (Valery Podrezov) Fixed a problem introduced in the 20051202 release where an exception is generated during method execution if a control method attempts to declare another method. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-