- 21 3月, 2006 40 次提交
-
-
由 Chuck Lever 提交于
Factor out the common piece of completing an NFS direct I/O request. Test plan: Compile kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Factor out a small common piece of the path that allocate nfs_direct_req structures. Test plan: Compile kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
We're about to add asynchrony to the NFS direct write path. Begin by abstracting out the common pieces in the read path. The first piece is nfs_direct_read_wait, which works the same whether the process is waiting for a read or a write. Test plan: Compile kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
For async iocb's, the NFS direct read path should return EIOCBQUEUED and call aio_complete when all the requested reads are finished. The synchronous part of the NFS direct read path behaves exactly as it was before. Test plan: aio-stress with "-O". OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Pass the iocb argument all the way down to the direct read request scheduler, and make it available in nfs_direct_read_result. Test plan: Compile the kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Millions of fsx-odirect ops. OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Eliminate the persistent use of automatic storage in all parts of the NFS client's direct read path to pave the way for introducing support for aio against files opened with the O_DIRECT flag. Test plan: Compile the kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Millions of fsx-odirect ops. OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
size_t is used for holding byte counts, so use it for variables storing rsize. Note that the write path will be updated as we add support for async O_DIRECT writes. Test plan: Need to verify that existing comparisons against new size_t variables behave correctly. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Update to latest coding style standards. Remove block comments on statically defined functions, and place function definitions all on one line. Test plan: Compile kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The NFS client's a_ops->direct_IO method, nfs_direct_IO, is required to be present to allow NFS files to be opened with O_DIRECT, but is never called because the NFS client shunts reads and writes to files opened with O_DIRECT directly to its own routines. Gut the nfs_direct_IO function. This eliminates the only part of the NFS client's direct I/O path that requires support for multi-segment iovs, allowing further simplification in subsequent patches. Test plan: Compile the kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Millions of fsx-odirect ops. OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Same callback hierarchy inversion as for the NFS write calls. This patch is not strictly speaking needed by the O_DIRECT code, but avoids confusing differences between the asynchronous read and write code. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This patch inverts the callback hierarchy for NFS write calls. Instead of having the NFSv2/v3/v4-specific code set up the RPC callback ops, we allow the original caller to do so. This allows for more flexibility w.r.t. how to set up and tear down the nfs_write_data structure while still allowing the NFSv3/v4 code to perform error handling. The greater flexibility is needed by the asynchronous O_DIRECT code, which wants to be able to hold on to the original nfs_write_data structures after the WRITE RPC call has completed in order to be able to replay them if the COMMIT call determines that the server has rebooted. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Currently lockd identifies its own locks using the FL_LOCKD flag. This doesn't scale well to multiple lock managers--if we did this in nfsv4 too, for example, we'd be left with only one free flag bit. Instead, we just check whether the file manager ops (fl_lmops) set on this lock are our own. The only use for this is in nlm_traverse_locks, which uses it to find locks that need cleaning up when freeing a host or a file. In the long run it might be nice to do reference counting instead of traversing all the locks like this.... Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
posix_test_lock() returns a pointer to a struct file_lock which is unprotected and can be removed while in use by the caller. Move the conflicting lock from the return to a parameter, and copy the conflicting lock. In most cases the caller ends up putting the copy of the conflicting lock on the stack. On i386, sizeof(struct file_lock) appears to be about 100 bytes. We're assuming that's reasonable. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
posix_lock_file() is used to add a blocked lock to Lockd's block, so posix_block_lock() is no longer needed. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Reorganize nlmsvc_lock() to make full use of posix_lock_file(), which does eveything nlmsvc_lock() needs - no need to call posix_test_lock(), posix_locks_deadlock(), or posix_block_lock() separately. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Reorganize nlmsvc_grant_blocked() to make full use of posix_lock_file(). Note that there's no need for separate calls to posix_test_lock(), posix_locks_deadlock(), or posix_block_lock(). Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Slightly more consistent dprintk error reporting, consolidate some up()'s. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Reuse NFSDBG_DIRCACHE and NFSDBG_LOOKUPCACHE to provide additional diagnostic messages that trace the operation of the NFS client's directory behavior. A few new messages are now generated when NFSDBG_VFS is active, as well, to trace normal VFS activity. This compromise provides better trace debugging for those who use pre-built kernels, without adding a lot of extra noise to the standard debug settings. Test-plan: Enable NFS trace debugging with flags 1, 2, or 4. You should be able to see different types of trace messages with each flag setting. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
RPC_DEBUG_DATA no longer needed in net/sunrpc/xprt.c. Test plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean-up: replace rpc_call() helper with direct call to rpc_call_sync. This makes NFSv2 and NFSv3 synchronous calls more computationally efficient, and reduces stack consumption in functions that used to invoke rpc_call more than once. Test plan: Compile kernel with CONFIG_NFS enabled. Connectathon on NFS version 2, version 3, and version 4 mount points. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add fields to the rpc_procinfo struct that allow the display of a human-readable name for each procedure in the rpc_iostats output. Also fix it so that the NFSv4 stats are broken up correctly by sub-procedure number. NFSv4 uses only two real RPC procedures: NULL, and COMPOUND. Test plan: Mount with NFSv2, NFSv3, and NFSv4, and do "cat /proc/self/mountstats". Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
NFS client now shows various RPC I/O metrics in /proc/self/mountstats. Test plan: Mount/umount while doing "cat /proc/self/mountstats", multiple iterations of connectathon locking suite. Test with NFS version 2, 3, and 4. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add a simple mechanism for collecting stats in the RPC client. Stats are tabulated during xprt_release. Note that per_cpu shenanigans are not required here because the RPC client already serializes on the transport write lock. Test plan: Compile kernel with CONFIG_NFS enabled. Basic performance regression testing with high-speed networking and high performance server. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Account for various things that occur while an RPC task is executed. Separate timers for RPC round trip and RPC execution time show how long RPC requests wait in queue before being sent. Eventually these will be accumulated at xprt_release time in one place where they can be viewed from userland. Test plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Monitor generic transport events. Add a transport switch callout to format transport counters for export to user-land. Test plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
RPC wait queue length will eventually be exported to userland via the RPC iostats interface. Test plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add a field in nfs_server to record a timestamp when a mount succeeds. Report the number of seconds the file system has been mounted via nfs_show_stats(). Test plan: Mount an NFS file system, watch the mountstats reports and compare with clock time. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Make an inode or an nfs_server struct available in the logic that handles JUKEBOX/DELAY type errors so the NFS client can account for them. This patch is split out from the main nfs iostat patch to highlight minor architectural changes required to support this statistic. Test plan: None. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Invoke the byte and event counter macros where we want to count bytes and events. Clean-up: fix a possible NULL dereference in nfs_lock, and simplify nfs_file_open. Test-plan: fsx and iozone on UP and SMP systems, with and without pre-emption. Watch for memory overwrite bugs, and performance loss (significantly more CPU required per op). Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add a per-superblock performance counter facility to the NFS client. This facility mimics the counters available for block devices and for networking. Expose these new counters via the new /proc/self/mountstats interface. Thanks to Andrew Morton and Trond Myklebust for their review and comments. Test plan: fsx and iozone on UP and SMP systems, with and without pre-emption. Watch for memory overwrite bugs, and performance loss (significantly more CPU required per op). Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Get rid of "lock" and "posix", and spell out "vers=". Test plan: None. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Sometimes it's important to know the exact RPC retransmit settings the kernel is using for an NFS mount point. Add this facility to the NFS client's show_options method. Test plan: Set various retransmit settings via the mount command, and check that the settings are reflected in /proc/mounts. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Create a new file under /proc/self, called mountstats, where mounted file systems can export information (configuration options, performance counters, and so on). Use a mechanism similar to /proc/mounts and s_ops->show_options. This mechanism does not violate namespace security, and is safe to use while other processes are unmounting file systems. Thanks to Mike Waychison for his review and comments. Test-plan: Test concurrent mount/unmount operations while cat'ing /proc/self/mountstats. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Levent Serinol 提交于
This patch adds server ip address to be printed out when "server requires stronger authentication" error occured. Signed-off-by: NLevent Serinol <lserinol@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Goldwyn Rodrigues 提交于
read_cache_mtime is no longer used in nfs_inode. This patch removes references of read_cache_mtime in the code comments. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Ingo Molnar 提交于
semaphore to mutex conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build and boot tested. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Eric Sesterhenn 提交于
this converts fs/nfs to kzalloc() usage. compile tested with make allyesconfig Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
nfs4_open_revalidate: 'res' may be used uninitialized nfs4_callback_compound: ‘hdr_res.nops’ may be used uninitialized 'op_nr’ may be used uninitialized encode_getattr_res: ‘savep’ may be used uninitialized Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The reason is that the idmapper cleanup may call flush_workqueue() on rpciod_workqueue. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If not, we cannot guarantee that idmap->idmap_dentry, gss_auth->dentry and clnt->cl_dentry are valid dentries. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-