- 13 10月, 2007 13 次提交
-
-
由 Mark Fasheh 提交于
ocfs2_queue_orphans() has an open coded readdir loop which can easily just use a directory accessor function. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Reviewed-by: NJoel Becker <joel.becker@oracle.com>
-
由 Mark Fasheh 提交于
filldir_t can take this, so don't turn de->inode into a 32 bit value. Right now this doesn't make a difference since no ocfs2 inodes overflow that, but it could be a nasty surprise later on if some kernel code is calling ocfs2_dir_foreach_blk() and expecting real inode numbers back... Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Reviewed-by: NJoel Becker <joel.becker@oracle.com>
-
由 Mark Fasheh 提交于
Put this in it's own function so that the functionality can be overridden. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Reviewed-by: NJoel Becker <joel.becker@oracle.com>
-
由 Mark Fasheh 提交于
The code for adding, removing, deleting directory entries was splattered all over namei.c. I'd rather have this all centralized, so that it's easier to make changes for inline dir data, and eventually indexed directories. None of the code in any of the functions was changed. I only removed the static keyword from some prototypes so that they could be exported. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Reviewed-by: NJoel Becker <joel.becker@oracle.com>
-
由 Mark Fasheh 提交于
We'll want to reuse most of this when pushing inline data back out to an extent. Keeping this part as a seperate patch helps to keep the upcoming changes for write support uncluttered. The core portion of ocfs2_zero_cluster_pages() responsible for making sure a page is mapped and properly dirtied is abstracted out into it's own function, ocfs2_map_and_dirty_page(). Actual functionality doesn't change, though zeroing becomes optional. We also turn part of ocfs2_free_write_ctxt() into a common function for unlocking and freeing a page array. This operation is very common (and uniform) for Ocfs2 cluster sizes greater than page size, so it makes sense to keep the code in one place. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Reviewed-by: NJoel Becker <joel.becker@oracle.com>
-
由 Mark Fasheh 提交于
By doing this, we can remove any higher level logic which has to have knowledge of btree functionality - any callers of ocfs2_write_begin() can now expect it to do anything necessary to prepare the inode for new data. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com> Reviewed-by: NJoel Becker <joel.becker@oracle.com>
-
由 Mark Fasheh 提交于
ocfs2-tools added some on-disk fields and flags which are used by tunefs.ocfs2. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Denis Cheng 提交于
Signed-off-by: NDenis Cheng <crquan@gmail.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Sunil Mushran 提交于
Implement sops->show_options() so as to allow /proc/mounts to show the mount options. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
This is technically harmless (recovery will clean it out later), but leaves a bogus entry in the slot_map which really shouldn't be there. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
c_used_tail_recs in struct ocfs2_merge_ctxt is only ever set, so we can remove it. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Tao Mao 提交于
delete_tail_recs in ocfs2_try_to_merge_extent() was only ever set, remove it. Signed-off-by: NTao Mao <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Tao Mao 提交于
ocfs2_insert_type->ins_free_records was only used in one place, and was set incorrectly in most places. We can free up some memory and lose some code by removing this. * Small warning fixup contributed by Andrew Mortom <akpm@linux-foundation.org> Signed-off-by: NTao Mao <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
- 12 10月, 2007 27 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ZLIB]: Fix external builds of zlib_inflate code. [TG3]: Fix APE induced regression [SKY2]: version 1.19 [SKY2]: use netdevice stats struct [SKY2]: fiber advertise bits initialization (trivial) [SKY2]: fix power settings on Yukon XL [SKY2]: ethtool register reserved area blackout
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Move zlib_inflate_blob() out into it's own source file, infutil.c, so that things like the powerpc zImage builder in arch/powerpc/boot/Makefile don't end up trying to compile it. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch fixes a bug caused by the recent APE support added for 5761 devices. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Update version to keep track of new changes. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Use builtin statistics structure from net device. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Put initialization in sequential order (same as other constants). Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Make sure PCI register for PHY power gets set correctly. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Make sure and not dump reserved areas of device space. Touching some of these causes machine check exceptions on boards like D-Link DGE-550SX. Coding note, used a complex switch statement rather than bitmap because it is easier to relate the block values to the documentation rather than looking at a encoded bitmask. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
-
由 Linus Torvalds 提交于
* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_mv: more S/G fixes
-
由 Jeff Garzik 提交于
* corruption fix: we only want the lower 16 bits of length (0 == 64kb) * ditto: the upper layer sets max-phys-segments to LIBATA_MAX_PRD, so we must reset it to own hw-specific length. * delete unused mv_fill_sg() return value Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Gibson 提交于
This adds a memchr() implementation to the bootwrapper, which will be needed when libfdt is merged in. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Implement show_unhandled_signals sysctl + support to print when a process is killed due to unhandled signals just as i386 and x86_64 does. Default to having it off, unlike x86 that defaults on. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Valentine Barshak 提交于
Currently find_legacy_serial_ports() can find no serial ports on the OPB with flattened device tree. Thus no legacy boot console can be initialized. Just the early udbg console works, which is initialized with udbg_init_44x_as1 on the UART's physical address specified in kernel config. This happens because we look for ns16750 serial devices only and expect opb node to have a device type property. This patch makes it look for ns16550-compatible devices and use of_device_is_compatible() for opb in case device type is not specified. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Allow a fixed framebuffer address to be assigned to the framebuffer device instead of allocating the framebuffer from the consistent memory pool. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Some custom implementations of the xilinx fb can use resolutions other than 640x480. This patch allows the resolution to be specified in the device tree or the xilinx_platform_data structure. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
The call to xilinxfb_assign is getting unwieldy when adding features to the Xilinx framebuffer driver. Change xilinxfb_assign() to accept a pointer to a xilinxfb_platform_data structure to prepare for adding additition configuration options. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Valentine Barshak 提交于
Add 64-bit physical address support to setup_indirect_pci(). Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (87 commits) mlx4_core: Fix section mismatches IPoIB: Allow setting policy to ignore multicast groups IB/mthca: Mark error paths as unlikely() in post_srq_recv functions IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages. IB/ipath: Remove redundant link state checks IB/ipath: Fix IB_EVENT_PORT_ERR event IB/ipath: Better handling of unexpected GPIO interrupts IB/ipath: Maintain active time on all chips IB/ipath: Fix QHT7040 serial number check IB/ipath: Indicate a couple of chip bugs to userspace IB/ipath: iba6110 rev4 no longer needs recv header overrun workaround IB/ipath: Use counters in ipath_poll and cleanup interrupts in ipath_close IB/ipath: Remove duplicate copy of LMC IB/ipath: Add ability to set the LMC via the sysfs debugging interface IB/ipath: Optimize completion queue entry insertion and polling IB/ipath: Implement IB_EVENT_QP_LAST_WQE_REACHED IB/ipath: Generate flush CQE when QP is in error state IB/ipath: Remove redundant code IB/ipath: Future proof eeprom checksum code (contents reading) IB/ipath: UC RDMA WRITE with IMMEDIATE doesn't send the immediate ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits) [SKY2]: status polling loop (post merge) [NET]: Fix NAPI completion handling in some drivers. [TCP]: Limit processing lost_retrans loop to work-to-do cases [TCP]: Fix lost_retrans loop vs fastpath problems [TCP]: No need to re-count fackets_out/sacked_out at RTO [TCP]: Extract tcp_match_queue_to_sack from sacktag code [TCP]: Kill almost unused variable pcount from sacktag [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L [TCP]: Add bytes_acked (ABC) clearing to FRTO too [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2 [NETFILTER]: x_tables: add missing ip6t_modulename aliases [NETFILTER]: nf_conntrack_tcp: fix connection reopening [QETH]: fix qeth_main.c [NETLINK]: fib_frontend build fixes [IPv6]: Export userland ND options through netlink (RDNSS support) [9P]: build fix with !CONFIG_SYSCTL [NET]: Fix dev_put() and dev_hold() comments [NET]: make netlink user -> kernel interface synchronious [NET]: unify netlink kernel socket recognition [NET]: cleanup 3rd argument in netlink_sendskb ... Fix up conflicts manually in Documentation/feature-removal-schedule.txt and my new least favourite crap, the "mod_devicetable" support in the files include/linux/mod_devicetable.h and scripts/mod/file2alias.c. (The latter files seem to be explicitly _designed_ to get conflicts when different subsystems work with them - that have an absolutely horrid lack of subsystem separation!) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (80 commits) [MIPS] tlbex.c: Cleanup __init usage. [MIPS] WRPPMC serial support move to platform device [MIPS] R1: Fix hazard barriers to make kernels work on R2 also. [MIPS] VPE: reimplement ELF loader. [MIPS] cleanup WRPPMC include files [MIPS] Add BUG_ON assertion for attempt to run kernel on the wrong CPU type. [MIPS] SMP: Use ISO C struct initializer for local structs. [MIPS] SMP: Kill useless casts. [MIPS] Kill num_online_cpus() loops. [MIPS] SMP: Implement smp_call_function_mask(). [MIPS] Make facility to convert CPU types to strings generally available. [MIPS] Convert list of CPU types from #define to enum. [MIPS] Optimize get_unaligned / put_unaligned implementations. [MIPS] checkfiles: Fix "need space after that ','" errors. [MIPS] Fix "no space between function name and open parenthesis" warnings. [MIPS] Allow hardwiring of the CPU type to a single type for optimization. [MIPS] tlbex: Size optimize code by declaring a few functions inline. [MIPS] pg-r4k.c: Dump the generated code [MIPS] Cobalt: Remove cobalt_machine_power_off() [MIPS] Cobalt: Move reset port definition to arch/mips/cobalt/reset.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits) ide: use only ->set_pio_mode method for programming PIO modes (take 2) sis5513: don't change UDMA settings when programming PIO it8213/piix/slc90e66: don't change DMA settings when programming PIO alim15x3: PIO mode setup fixes siimage: fix ->set_pio_mode method to select PIO data transfer cs5520: don't enable VDMA in ->speedproc sc1200: remove redundant warning message from sc1200_tune_chipset() ide-pmac: PIO mode setup fixes (take 3) icside: fix ->speedproc to return on unsupported modes (take 5) sgiioc4: use ide_tune_dma() amd74xx/via82cxxx: use ide_tune_dma() ide: add ide_set{_max}_pio() (take 4) ide: Kconfig face-lift ide: move ide_rate_filter() calls to the upper layer (take 2) sis5513: add ->udma_filter method for chipset_family >= ATA_133 ide: mode limiting fixes for user requested speed changes ide: add missing ide_rate_filter() calls to ->speedproc()-s ide: call udma_filter() before resorting to the UltraDMA mask ide: make jmicron match vendor and device class pdc202xx_new: switch to using pci_get_slot() (take 2) ...
-
git://git.o-hand.com/linux-rpurdie-leds由 Linus Torvalds 提交于
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Update Cobalt Qube series front LED support leds: Add Cobalt Raq series LEDs support leds: Rename leds-cobalt driver
-