- 27 6月, 2017 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Complete the switch to using te pr_{warning,error,etc} error reporting facilities. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-3l9gr6237b4aqyo0rsspixe2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
And switch from warning() to pr_warning(), to elliminate another duplication: too many error reporting facilities. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-pkzcjrhek3uuqc4i5i9ealwd@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The warning(str_error_r(errno)) pattern can be replaced with a function, do it. And while at it use pr_warning(), we have way too many error reporting facilities, time to drop some, starting with the one we got from the git sources. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-lbak5npj1ri1uuvf1en3c0p0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Richter 提交于
This patch adds platform dependency into the test case 15 (perf_event_attr). It is based on a suggestion from Jiri Olsa. Add a new optional attribute named 'arch' in the [config] section of the test case file. It is a comma separated list of architecture names this test can be executed on. For example: arch = x86_64,alpha,ppc If this attribute is missing the test is executed on any platform. This does not break existing behavior. The values listed for this attribute should be identical to uname -m output. If the list starts with an exclamation mark (!) the comparison is inverted, for example for arch = !s390x,ppc the test is not executed on s390x or ppc platforms. The exclamation mark must be at the beginnning of the list. Here is an example debug output: [root@s35lp76]# fgrep arch tests/attr/test-stat-C2 arch = x86_64,alpha,ppc [root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \ -d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1 provides the following output: running './tests/attr//test-stat-C1' test limitation 'x86_64,alpha,ppc' <--- new loading expected events Event event:base-stat fd = 1 group_fd = -1 ..... Here is the output when a test is skipped: [root@s35lp76]# fgrep arch tests/attr/test-stat-C1 arch = !s390x [root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \ -d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1 provides the following output: test limitation '!s390x' <--- new skipped [s390x] './tests/attr//test-stat-C1' <--- new The test is skipped with return code 0. Suggested-and-Acked-by: NJiri Olsa <jolsa@redhat.com> Reviewed-by: NArnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/20170622073625.86762-1-tmricht@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 22 6月, 2017 1 次提交
-
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo-4.13-20170621' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Add support to measure SMI cost in 'perf stat' (Kan Liang) - Add support for unwinding callchains in powerpc with libdw (Paolo Bonzini) Fixes: - Fix message: cpu list option is -C not -c (Adrian Hunter) - Fix 'perf script' message: field list option is -F not -f (Adrian Hunter) - Intel PT fixes: (Adrian Hunter) o Fix missing stack clear o Ensure IP is zero when state is INTEL_PT_STATE_NO_IP o Fix last_ip usage o Ensure never to set 'last_ip' when packet 'count' is zero o Clear FUP flag on error o Fix transactions_sample_type Infrastructure changes: - Intel PT cleanups/refactorings (Adrian Hunter) o Use FUP always when scanning for an IP o Add missing __fallthrough o Remove redundant initial_skip checks o Allow decoding with branch tracing disabled o Add default config for pass-through branch enable o Add documentation for new config terms o Add decoder support for ptwrite and power event packets o Add reserved byte to CBR packet payload o Add decoder support for CBR events - Move find_process() to the only place that uses it, skimming some more fat from util.[ch] (Arnaldo Carvalho de Melo) - Do parameter validation earlier on fetch_kernel_version() (Arnaldo Carvalho de Melo) - Remove unused _ALL_SOURCE define (Arnaldo Carvalho de Melo) - Add sysfs__write_int function (Kan Liang) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 21 6月, 2017 22 次提交
-
-
由 Adrian Hunter 提交于
Fix message because field list option is -F not -f. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-20-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Fix message because cpu list option is -C not -c Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-19-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
'transactions_sample_type' is needed to correctly inject transactions samples but it was not being set. Set it from the event sample type. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-18-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
'initial_skip' is checked inside the sample synthesis functions which means it is actually being done twice for 'instructions' and 'transactions' samples. Remove the redundant checks. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-17-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Add decoder support for informing the tools of changes to the core-to-bus ratio (CBR). Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-16-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Future proof CBR packet decoding by passing through also the undefined 'reserved' byte in the packet payload. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-15-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Add decoder support for PTWRITE, MWAIT, PWRE, PWRX and EXSTOP packets. This patch only affects the decoder, so the tools still do not select or consume the new information. That is added in subsequent patches. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-14-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Add documentation for new config terms. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-13-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Branch tracing is enabled by default, so a fake config bit called 'pt' (pass-through) was added to allow the 'branch enable' bit to have affect. Add default config 'pt,branch' which will allow users to disable branch tracing using 'branch=0' instead of having to specify 'pt,branch=0'. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-12-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The kernel now supports the disabling of branch tracing, however the decoder assumes branch tracing is always enabled. Pass through a parameter to indicate whether branch tracing is enabled and use it to avoid cases when the decoder is expecting branch packets. There are 2 such cases. First, FUP packets which can bind to an IP even when there is no branch tracing. Secondly, the decoder will try to use branch packets to find an IP to start decoding or to recover from errors. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-11-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
perf tools uses __fallthrough. Add missing __fallthrough to a switch statement. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-10-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Sometimes a FUP packet is associated with a TSX transaction and a flag is set to indicate that. Ensure that flag is cleared on any error condition because at that point the decoder can no longer assume it is correct. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1495786658-18063-9-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The decoder will try to use branch packets to find an IP to start decoding or to recover from errors. Currently the FUP packet is used only in the case of an overflow, however there is no reason for that to be a special case. So just use FUP always when scanning for an IP. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1495786658-18063-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is not updated when a branch target has been suppressed, which is indicated by IPBytes == 0. IPBytes is stored in the packet 'count', so ensure never to set 'last_ip' when packet 'count' is zero. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1495786658-18063-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is considered to be reset to zero whenever there is a synchronization packet (PSB). The decoder wasn't doing that, and was treating the zero value to mean that there was no last IP, whereas compression can be done against the zero value. Fix by setting last_ip to zero when a PSB is received and keep track of have_last_ip. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1495786658-18063-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
A value of zero is used to indicate that there is no IP. Ensure the value is zero when the state is INTEL_PT_STATE_NO_IP. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1495786658-18063-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The return compression stack must be cleared whenever there is a PSB. Fix one case where that was not happening. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1495786658-18063-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The decoder uses its current timestamp in samples. Usually that is a timestamp that has already passed, but in some cases it is a timestamp for a branch that the decoder is walking towards, and consequently hasn't reached. Improve that situation by using the pkt_state to determine when to use the current or previous timestamp. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1495786658-18063-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Move decoder error setting into one condition. Cc'ed to stable because later fixes depend on it. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1495786658-18063-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Paolo Bonzini 提交于
Porting PPC to libdw only needs an architecture-specific hook to move the register state from perf to libdw. The ARM and x86 architectures already use libdw, and it is useful to have as much common code for the unwinder as possible. Mark Wielaard has contributed a frame-based unwinder to libdw, so that unwinding works even for binaries that do not have CFI information. In addition, libunwind is always preferred to libdw by the build machinery so this cannot introduce regressions on machines that have both libunwind and libdw installed. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NMilian Wolff <milian.wolff@kdab.com> Acked-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1496312681-20133-1-git-send-email-pbonzini@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
Implementing a new --smi-cost mode in perf stat to measure SMI cost. During the measurement, the /sys/device/cpu/freeze_on_smi will be set. The measurement can be done with one counter (unhalted core cycles), and two free running MSR counters (IA32_APERF and SMI_COUNT). In practice, the percentages of SMI core cycles should be more useful than absolute value. So the output will be the percentage of SMI core cycles and SMI#. metric_only will be set by default. SMI cycles% = (aperf - unhalted core cycles) / aperf Here is an example output. Performance counter stats for 'sudo echo ': SMI cycles% SMI# 0.1% 1 0.010858678 seconds time elapsed Users who wants to get the actual value can apply additional --no-metric-only. Signed-off-by: NKan Liang <Kan.liang@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Elliott <elliott@hpe.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1495825538-5230-3-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
Add sysfs__write_int() to ease up writing int to sysfs. New interface is: int sysfs__write_int(const char *entry, int value); Also, introducing filename__write_int() which is useful for new helpers to write sysctl values. Signed-off-by: NKan Liang <Kan.liang@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Elliott <elliott@hpe.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1495825538-5230-2-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 20 6月, 2017 13 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Curious as to what this was for I looked at /usr/include/ and only some python headers define this, and it ends up being to enable "extensions" on some old OSes: /* Enable extensions on AIX 3, Interix */ I guess we can remove this one safely. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-omnundlxo2brs552bdl6m0j1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
While trying to reduce util.[ch] I noticed that fetch_kernel_version() and fetch_ubuntu_kernel_version() do lots of operations only to check if they are needed, i.e. it checks if the pointer where to return the kernel version is NULL only after obtaining the kernel version from /proc/version_signature or by parsing the results from uname(). Do it earlier not to confuse people reading this code in the future :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-i94qwyekk4tzbu0b9ce1r1mz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
And make it static, nobody else uses it, if we ever need it in more places we can carve a new source file for process related methods, for now lets reduce util.{c,h} a tad more. Link: http://lkml.kernel.org/n/tip-zgb28rllvypjibw52aaz9p15@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo-4.13-20170719' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Allow adding and removing fields to the default 'perf script' columns, using + or - as field prefixes to do so (Andi Kleen) - Display titles in left frame in the annotate browser (Jin Yao) - Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso' (Mark Santaniello) - Support function filtering in 'perf ftrace' (Namhyung Kim) - Allow specifying function call depth in 'perf ftrace' (Namhyumg Kim) Infrastructure changes: - Adopt __noreturn, __printf, __scanf, noinline, __packed and __aligned __alignment__(()) markers, to make the tools/ source code base to be more compact and look more like kernel code (Arnaldo Carvalho de Melo) - Remove unnecessary check in annotate_browser_write() (Jin Yao) - Return arch from symbol__disassemble() so that callers, such as the annotate TUI browser to use arch specific formattings, such as the upcoming instruction micro-op fusion on Intel Core (Jin Yao) - Remove superfluous check before use in the coresight code base (Kim Phillips) - Remove unused SAMPLE_SIZE defines and BTS priv array (Kim Phillips) - Error handling fix/tidy ups in 'perf config' (Taeung Song) - Avoid error in the BPF proggie built with clang in 'perf test llvm' when PROFILE_ALL_BRANCHES is set (Wang Nan) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Taeung Song 提交于
To simplify the code related to 'ret' variable in cmd_config(), initialize 'ret' with -1 instead of 0 and use goto to perform resource release at the end of the function, setting ret to zero just before the out_err label, as usual in the kernel sources. Signed-off-by: NTaeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1497671202-20495-1-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Taeung Song 提交于
show_spec_config() and set_config() can be called multiple times in the loop in cmd_config(). However, The error cases of them wasn't checked, so fix it. Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NTaeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1497671197-20450-1-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The -D/--graph-depth option is to set max graph depth. The following example traces max 2-depth of page fault handler. $ sudo perf ftrace -G __do_page_fault -D 2 -- hello ... 0) | __do_page_fault() { 0) 0.063 us | down_read_trylock(); 0) 0.251 us | find_vma(); 0) 5.374 us | handle_mm_fault(); 0) 0.054 us | up_read(); 0) 7.463 us | } ... Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170618142302.25390-4-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The -T/--trace-funcs and -N/--notrace-funcs options are to specify functions to enable/disable tracing dynamically. The -G/--graph-funcs and -g/--nograph-funcs options are to set filters for function graph tracer. For example, to trace fault handling functions only: $ sudo perf ftrace -T *fault hello 0) | __do_page_fault() { 0) | handle_mm_fault() { 0) 2.117 us | __handle_mm_fault(); 0) 3.627 us | } 0) 7.811 us | } 0) | __do_page_fault() { 0) | handle_mm_fault() { 0) 2.014 us | __handle_mm_fault(); 0) 2.424 us | } 0) 2.951 us | } ... To trace all functions executed in __do_page_fault: $ sudo perf ftrace -G __do_page_fault hello 2) | __do_page_fault() { 3) 0.060 us | down_read_trylock(); 3) | find_vma() { 3) 0.075 us | vmacache_find(); 3) 0.053 us | vmacache_update(); 3) 1.246 us | } 3) | handle_mm_fault() { 3) 0.063 us | __rcu_read_lock(); 3) 0.056 us | mem_cgroup_from_task(); 3) 0.057 us | __rcu_read_unlock(); 3) | __handle_mm_fault() { 3) | filemap_map_pages() { 3) 0.058 us | __rcu_read_lock(); 3) | alloc_set_pte() { ... But don't want to show details in handle_mm_fault: $ sudo perf ftrace -G __do_page_fault -g handle_mm_fault hello 3) | __do_page_fault() { 3) 0.049 us | down_read_trylock(); 3) | find_vma() { 3) 0.048 us | vmacache_find(); 3) 0.041 us | vmacache_update(); 3) 0.680 us | } 3) 0.036 us | up_read(); 3) 4.547 us | } /* __do_page_fault */ ... Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170618142302.25390-3-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The 'perf ftrace' command fails to reset tracer after finishing recording like below: $ sudo perf ftrace -v hello write 'nop' to tracing/current_tracer failed: Device or resource busy ... This is because the trace_pipe file is open in pager process. Move the pager setup to before opening the file. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: kernel-team@lge.com Fixes: 58335964 ("perf ftrace: Use pager for displaying result") Link: http://lkml.kernel.org/r/20170618142302.25390-2-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
It'd be better for debugging to show an error message when it fails to setup ftrace for some reason. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170618142302.25390-1-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Mark Santaniello 提交于
The idea here is to make AutoFDO easier in cloud environment with ASLR. It's easiest to show how this is useful by example. I built a small test akin to "while(1) { do_nothing(); }" where the do_nothing function is loaded from a dso: $ cat burncpu.cpp #include <dlfcn.h> int main() { void* handle = dlopen("./dso.so", RTLD_LAZY); if (!handle) return -1; typedef void (*fp)(); fp do_nothing = (fp) dlsym(handle, "do_nothing"); while(1) { do_nothing(); } } $ cat dso.cpp extern "C" void do_nothing() {} $ cat build.sh #!/bin/bash g++ -shared dso.cpp -o dso.so g++ burncpu.cpp -o burncpu -ldl I sampled the execution of this program with perf record -b. Using the existing "brstack,dso", we get absolute addresses that are affected by ASLR, and could be different on different hosts. The address does not uniquely identify a branch/target in the binary: $ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1 0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0 Using the existing "brstacksym,dso" is a little better, because the symbol plus offset and dso name *does* uniquely identify a branch/target in the binary. Ultimately, however, AutoFDO wants a simple offset into the binary, so we'd have to undo all the work perf did to symbolize in the first place: $ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1 do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0 With the new "brstackoff,dso" we get what we need: a simple offset into a specific dso/binary that uniquely identifies a branch/target: $ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1 0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0 Signed-off-by: NMark Santaniello <marksan@fb.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com [ Updated documentation about 'brstackoff' using text from above ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Mark Santaniello 提交于
Perf script can report the dso for "addr" and "ip" fields. This adds the same support for the "brstack" and "brstacksym" fields. This can be helpful for AutoFDO: we can ignore LBR entries unless the source and target address are both in the target module we are about to build. I built a small test akin to "while(1) { do_nothing(); }" where the do_nothing function is loaded from a dso: $ cat burncpu.cpp #include <dlfcn.h> int main() { void* handle = dlopen("./dso.so", RTLD_LAZY); if (!handle) return -1; typedef void (*fp)(); fp do_nothing = (fp) dlsym(handle, "do_nothing"); while(1) { do_nothing(); } } $ cat dso.cpp extern "C" void do_nothing() {} $ cat build.sh #!/bin/bash g++ -shared dso.cpp -o dso.so g++ burncpu.cpp -o burncpu -ldl I sampled the execution with perf record -b. Using the new perf script functionality I can easily find cases where there was a transition from one dso to another: $ perf record -a -b -- sleep 5 [ perf record: Woken up 55 times to write data ] [ perf record: Captured and wrote 18.815 MB perf.data (43593 samples) ] $ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1 0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0 $ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1 do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0 Signed-off-by: NMark Santaniello <marksan@fb.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170619163825.2012979-1-marksan@fb.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-