- 14 2月, 2014 5 次提交
-
-
由 Barak Bercovitz 提交于
When the chip is in ELP mode read/write to FW is invalid and may cause the lower layers to get stuck. The reads/writes concerning ELP wakeup are the exception here and are checked for. In addition to blocking the IO, produce a warning. Signed-off-by: NBarak Bercovitz <barak@wizery.com> Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arik Nemtsov 提交于
Sometimes a tx_flush during suspend fails, but the FW manages to flush out the packets during the time when the host is supsended. Cancel the Tx-watchdog on suspend to not cause a spurious recovery on resume for that case. Set a flag to reinit the watchdog on the first Tx after resume, so we'll still recover if the FW is not empty and there's indeed a problem. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Nadim Zubidat 提交于
zero rx_filter_enabled array after recovery to avoid cases were the driver will keep trying to clear a filter which is not configured in FW. Such case will cause consecutive recoveries due to command execution failures. While on it, convert rx_filter_enabled to bitmap, to save some memory and make sparse happy (it doesn't like sizeof(bool array)). Signed-off-by: NNadim Zubidat <nadimz@ti.com> Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 ZHAO Gang 提交于
Use ieee80211_channel_to_frequency() to replace b43_channel_to_freq_{2,5}ghz(), and remove unused b43_freq_to_channel_{2,5}ghz(). Signed-off-by: NZHAO Gang <gamerh2o@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 2月, 2014 35 次提交
-
-
由 Avinash Patil 提交于
This patch adds key material V2 support to mwifiex. Newer FW supports this feature and FW KEY API version is used to determine which command structure needs to be used. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds support to parse FW API version TLVs. Currently only API version for key_material is supported. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
During deauthenticate/link lost event, disable all TDLS links as TDLS would not work when infra connection is not active. Also this will avoid an issue where ping to peer station doesn't work after reassociation to AP where we had created TDLS link in earlier association. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
If TDLS link is 11ac enabled i.e. we as well as peer station supports VHT, configure seprate TX & RX window sizes during BA setup. So even if BSS does not support 11ac, we can use VHT capabilities and higher window sizes on direct link. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
During TDLS setup request/response, if HW is 11ac capable, we add VHT Capability IEs in outgoing data frame. Also while processing received setup request/response, we preserve peer's 11ac capability retrieved from IEs. Patch also gets VHT parameters from config_station handlers and sets it to FW using TDLS config command. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch changes mwifiex_fill_vht_cap_tlv function to pass struct ieee80211_vht_cap instead of mwifiex_ie_types_vhtcap so that it can be used generically. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds AMPDU support for TDLS link. We have set 11n capabilities including AMPDU parameters during ENABLE_LINK. We set a variable in RA list to indicate this as TDLS link. This patch uses these capabilities to know if AMPDU is allowed on TDLS link and enables AMPDU aggregation for TX and RX reording support for RA list for this peer. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
1. If data packet is addressed to TDLS peer for which link is established, mark these packets with TDLS flag so that FW can send them on direct link instead of sending via AP. 2. If data packet is addressed to TDLS peer and TDLS setup is underway, move these packets to TDLS queue. 3. If this packet is TDLS setup packet, do not block it. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
While TDLS link is being setup, few packets from this station to peer station may be buffered at AP. It may happen that once TDLS link is setup, packets sent from station to peer on direct link get delivered before traffic from AP arrives at peer station. This results into packet reordering issue at peer station. To avoid this, we hold data packets destined to TDLS peer during TDLS setup. These packets are moved to temperory TDLS TX queue. Upon successful TDLS setup, they are moved to RA list created for this peer. Upon failure, packets are moved back to AP's RA list for that particular TID. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds cfg80211 change_station handler support for mwifiex which is needed for TDLS link setup. Driver creates a command to modify peer link capabilities and issues command to FW. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds cfg80211 add_station handler support for mwifiex which is needed for TDLS setup. Driver issues create TDLS link command to FW upon receiving add_station from cfg80211. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds cfg80211 handler tdls_oper handler support to mwifiex. Upon enable link, driver sets status as TDLS status as setup complete and also sets AMSDU size, AMPDU params for direct link. Upon disable link, driver issues command to FW to delete this link in FW. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds support for parsing TDLS action frames during station receive handler. Peer station capabilities are stored into station node. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds support for TDLS management frames transmit handler. mwifiex driver supports TDLS with external support, i.e. expects user space application to form TDLS frames. Same is advertised to cfg80211 during registration. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Pass 'struct ieee80211_ht_cap' pointer to mwifiex_fill_cap_info() instead of 'struct mwifiex_ie_types_htcap' pointer, because the routine internally uses the later one. This patch also adds WARN_ON_ONCE check for NULL band. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
These functions are now needed by TDLS while managing station list. Move them from AP related file to utility file. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
tos_to_tid_inv values are needed even during TDLS restore operations. Currently tos_to_tid_inv is part of wmm.c and is declared static. Make it part of private structure so that it can be used in other files as well. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch fixes a bug where we were checking for AP's AMPDU param setting even when transmitting traffic to associated station. Patch adds provision to pass additional parameter ra_list pointer to function which checks if AMPDU is allowed. If current BSS type is AP, we check station's AMPDU params else we check AP's AMPDU params. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Currently MU/SU beamformer and MU beamformee features are not supported. Hence this patch modifies VHT capability information accordingly. Number of sounding dimensions should be zero in this case. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
This patch makes sure that beamforming capability field in ht capability info gets filled if hardware supports the feature. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Aaron Durbin 提交于
The current mwifiex pcie driver assumed that it would get its cmdrsp_complete() callback called before another command was sent to unmap the command's skbuff. However, that is not true. The mwifiex_check_ps_cond() will send a sleep command to the card without having adapter->curr_cmd set. Within the workqueue's state machine the adapter's state would be set to allow commands (curr_cmd = NULL && cmd_sent = false) after having receieved the response from the sleep command. The card->cmd_buf would then be overridden with the new command but the first command's skbuff was not unmapped. This leaks mapped skbuffs when a bounce buffer is employed. To rectify this unmap the card->cmd_buf when the response is received from the card instead of waiting for the cmdrsp_complete() callback. Signed-off-by: NAaron Durbin <adurbin@chromium.org> Reviewed-by: NPaul Stewart <pstew@chromium.org> Reviewed-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Aaron Durbin 提交于
Depending on the underlying DMA implementation its not possible to partially unmap DMA buffers. Moreover its not possible to understand the intent of passing 0 as the size to dma unmap. The intent of this driver is unmap the entire skb buffer. The only way to ensure that the size matches on unmap is to store both the dma address and the size in the skb ca field. Introduce a mwifiex_dma_mapping structure which tracks the dma address and the size. Additionally, provide a mwifiex_unmap_pci_memory() that utilizes the new structure. This also provide symmetry within the internal API. Signed-off-by: NAaron Durbin <adurbin@chromium.org> Reviewed-by: NPaul Stewart <pstew@chromium.org> Reviewed-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
In extended scan, host gets scan results through one or multiple events instead of scan command response. Host will send next scan command when all the events are received. Legacy scan sometimes truncates scan results in a noisy environment due to buffer length limitation. This issue is addressed in extended scan. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
This new function will be useful later for extended scan feature. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
This new function will be useful later for extended scan feature. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
'mwifiex_bcn_param' structure contains five parameters which are present in beacon buffer in case of legacy scan. 'rssi' field won't be there in this buffer for extended scan. Hence 'bssid' and 'rssi' are removed from the structure and it is renamed as 'mwifiex_fixed_bcn_param' so that we can have common parsing logic later for both. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
bit12 in fw_cap_info is for testing only. Remove all related code. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
1) rename max_mcs to mcs; 2) initialize 'i' and 'nss' as 1 instead of 0 in nss lookup; 3) use GET_VHTNSSMCS(mcs_map, nss) macro; 4) use IEEE80211_VHT_MCS_* definitions instead of hard coding Reported-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
Remove these local array variables and define them as static const array in global space. The duplicated mcs_rate table is removed automatically with this change. Reported-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
Remove driver's macro and use ieee80211's definition instead Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
This patch adds a routine to calculate the median IQ correction values for AR955x, which is used for outlier detection. The normal method which is used for all other chips is bypassed for AR955x. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
This will be used for storing data for mutiple IQ calibration runs, for AR955x. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
IQ calibration post-processing for AR955x is different from other chips - instead of just doing it as part of AGC calibration once, it is triggered 3 times and a median is determined. This patch adds initial support for changing the calibration behavior for AR955x. Also, to simplify things, a helper routine to issue/poll AGC calibration is used. For non-AR955x chips, the iqcal_idx (which will be used in subsequent patches) is set to zero. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Incorrect values are programmed in the registers containing the IQ correction coefficients by the IQ-CAL post-processing code. Fix this. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
Use ar9003_hw_tx_iq_cal_outlier_detection instead. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-