- 01 9月, 2015 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB updates from Greg KH: "Here's the big USB and PHY patchset for 4.3-rc1. As usual, the majority of the changes are in the USB gadget portion of the tree, lots of little changes all over the place for bugs and new hardware. Other than that, the normal mix of new hardware support and bugfixes. All have been in linux-next with no reported issues" * tag 'usb-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (261 commits) USB: qcserial: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module USB: ftdi_sio: Added custom PID for CustomWare products USB: usb_wwan: silence read errors on disconnect USB: option: silence interrupt errors USB: symbolserial: Correct transferred data size USB: symbolserial: Use usb_get_serial_port_data usb: misc: usbtest: format max packet size for iso transfer usb: host: ehci-sys: delete useless bus_to_hcd conversion Revert "usb: interface authorization: Declare authorized attribute" Revert "usb: interface authorization: Introduces the default interface authorization" Revert "usb: interface authorization: Control interface probing and claiming" Revert "usb: interface authorization: Introduces the USB interface authorization" Revert "usb: interface authorization: SysFS part of USB interface authorization" Revert "usb: interface authorization: Documentation part" Revert "usb: interface authorization: Use a flag for the default device authorization" usb: core: hub: Removed some warnings generated by checkpatch.pl USB: host: ohci-at91: merge loops in ohci_hcd_at91_drv_probe USB: host: ohci-at91: merge ohci_at91_of_init in ohci_hcd_at91_drv_probe USB: host: ohci-at91: depend on OF USB: host: ohci-at91: move at91_usbh_data definition in c file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial driver updates from Greg KH: "Here is the big tty/serial driver update for 4.3-rc1. Not many major things, a number of driver updates and changes, and the 8250 driver got split up a bit to make it easier to work with by moving some functions to a new file. Full details are in the shortlog. All have been in linux-next with no reported issues" * tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits) serial: imx: save and restore context in the suspend path serial: imx: allow waking up on RTSD serial: imx: introduce serial_imx_enable_wakeup() serial: imx: remove unbalanced clk_prepare serial: 8250: move rx_running out of the bitfield tty: serial: 8250_omap: do not use RX DMA if pause is not supported serial:8250_dw: do not alter CTS and DCTS since AFE is enabled tty: serial: men_z135_uart.c: Don't initialize port->lock tty: serial: men_z135_uart.c: Fix race between IRQ and set_termios() serial: 8250: bind to ALi Fast Infrared Controller (ALI5123) serial: 8250: don't bind to SMSC IrCC IR port serial: mxs-auart: fix baud rate range serial: mxs-auart: keep the AUART unit in reset state when not in use serial: mxs-auart: use a function name to reflect what it really does serial: 8250_pci: fix mode after S3/S4 resume for F81504/508/512 sc16is7xx: constify devtype sc16is7xx: support multiple devices sc16is7xx: save and use per-chip line number uart: pl011: Add support to ZTE ZX296702 uart uart: pl011: Improve LCRH register access decision ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver updates from Greg KH: "Here is the big staging driver updates for 4.3-rc1. Lots of things all over the place, almost all of them trivial fixups and changes. The usual IIO updates and new drivers and we have added the MOST driver subsystem which is getting cleaned up in the tree. The ozwpan driver is finally being deleted as it is obviously abandoned and no one cares about it. Full details are in the shortlog, and all of these have been in linux-next with no reported issues" * tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (912 commits) staging/lustre/o2iblnd: remove references to ib_reg_phsy_mr() staging: wilc1000: fix build warning with setup_timer() staging: wilc1000: remove DECLARE_WILC_BUFFER() staging: wilc1000: remove void function return statements that are not useful staging: wilc1000: coreconfigurator.c: fix kmalloc error check staging: wilc1000: coreconfigurator.c: use kmalloc instead of WILC_MALLOC staging: wilc1000: remove unused codes of gps8ConfigPacket staging: wilc1000: remove unnecessary void pointer cast staging: wilc1000: remove WILC_NEW and WILC_NEW_EX staging: wilc1000: use kmalloc instead of WILC_NEW staging: wilc1000: Process WARN, INFO options of debug levels from user staging: wilc1000: remove unneeded tstrWILC_MsgQueueAttrs typedef staging: wilc1000: delete wilc_osconfig.h staging: wilc1000: delete wilc_log.h staging: wilc1000: delete wilc_timer.h staging: wilc1000: remove WILC_TimerStart() staging: wilc1000: remove WILC_TimerCreate() staging: wilc1000: remove WILC_TimerDestroy() staging: wilc1000: remove WILC_TimerStop() staging: wilc1000: remove tstrWILC_TimerAttrs typedef ...
-
- 31 8月, 2015 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core updates from Greg KH: "Here is the new patches for the driver core / sysfs for 4.3-rc1. Very small number of changes here, all the details are in the shortlog, nothing major happening at all this kernel release, which is nice to see" * tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: bus: subsys: update return type of ->remove_dev() to void driver core: correct device's shutdown order driver core: fix docbook for device_private.device selftests: firmware: skip timeout checks for kernels without user mode helper kernel, cpu: Remove bogus __ref annotations cpu: Remove bogus __ref annotation of cpu_subsys_online() firmware: fix wrong memory deallocation in fw_add_devm_name() sysfs.txt: update show method notes about sprintf/snprintf/scnprintf usage devres: fix devres_get()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver patches from Greg KH: "Here's the "big" char/misc driver update for 4.3-rc1. Not much really interesting here, just a number of little changes all over the place, and some nice consolidation of the nvmem drivers to a common framework. As usual, the mei drivers stand out as the largest "churn" to handle new devices and features in their hardware. All have been in linux-next for a while with no issues" * tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits) auxdisplay: ks0108: initialize local parport variable extcon: palmas: Fix build break due to devm_gpiod_get_optional API change extcon: palmas: Support GPIO based USB ID detection extcon: Fix signedness bugs about break error handling extcon: Drop owner assignment from i2c_driver extcon: arizona: Simplify pdata symantics for micd_dbtime extcon: arizona: Declare 3-pole jack if we detect open circuit on mic extcon: Add exception handling to prevent the NULL pointer access extcon: arizona: Ensure variables are set for headphone detection extcon: arizona: Use gpiod inteface to handle micd_pol_gpio gpio extcon: arizona: Add basic microphone detection DT/ACPI bindings extcon: arizona: Update to use the new device properties API extcon: palmas: Remove the mutually_exclusive array extcon: Remove optional print_state() function pointer of struct extcon_dev extcon: Remove duplicate header file in extcon.h extcon: max77843: Clear IRQ bits state before request IRQ toshiba laptop: replace ioremap_cache with ioremap misc: eeprom: max6875: clean up max6875_read() misc: eeprom: clean up eeprom_read() misc: eeprom: 93xx46: clean up eeprom_93xx46_bin_read/write ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm updates from Paolo Bonzini: "A very small release for x86 and s390 KVM. - s390: timekeeping changes, cleanups and fixes - x86: support for Hyper-V MSRs to report crashes, and a bunch of cleanups. One interesting feature that was planned for 4.3 (emulating the local APIC in kernel while keeping the IOAPIC and 8254 in userspace) had to be delayed because Intel complained about my reading of the manual" * tag 'kvm-4.3-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) x86/kvm: Rename VMX's segment access rights defines KVM: x86/vPMU: Fix unnecessary signed extension for AMD PERFCTRn kvm: x86: Fix error handling in the function kvm_lapic_sync_from_vapic KVM: s390: Fix assumption that kvm_set_irq_routing is always run successfully KVM: VMX: drop ept misconfig check KVM: MMU: fully check zero bits for sptes KVM: MMU: introduce is_shadow_zero_bits_set() KVM: MMU: introduce the framework to check zero bits on sptes KVM: MMU: split reset_rsvds_bits_mask_ept KVM: MMU: split reset_rsvds_bits_mask KVM: MMU: introduce rsvd_bits_validate KVM: MMU: move FNAME(is_rsvd_bits_set) to mmu.c KVM: MMU: fix validation of mmio page fault KVM: MTRR: Use default type for non-MTRR-covered gfn before WARN_ON KVM: s390: host STP toleration for VMs KVM: x86: clean/fix memory barriers in irqchip_in_kernel KVM: document memory barriers for kvm->vcpus/kvm->online_vcpus KVM: x86: remove unnecessary memory barriers for shared MSRs KVM: move code related to KVM_SET_BOOT_CPU_ID to x86 KVM: s390: log capability enablement and vm attribute changes ...
-
由 Linus Torvalds 提交于
-
- 30 8月, 2015 1 次提交
-
-
由 Javi Merino 提交于
Commit cf736ea6 ("thermal: power_allocator: do not use devm* interfaces") forgot to change a devm_kcalloc() to just kcalloc(), but it's corresponding devm_kfree() was changed to kfree(). Allocate with kcalloc() to match the kfree(). Fixes: cf736ea6 ("thermal: power_allocator: do not use devm* interfaces") Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: NJavi Merino <javi.merino@arm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 8月, 2015 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixlet from Tejun Heo: "Simple blacklist entry addition" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: Add factory recertified Crucial M500s to blacklist
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Here are stable fixes that have been gathered since rc8: fixes for HD-audio widget power control regressions since 4.1, a NULL fix for HD-audio HDMI, a noise fix for Conexant codecs and a quirk addition for USB-Audio DSD" * tag 'sound-fix-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix path power activation ALSA: hda - Check all inputs for is_active_nid_for_any() ALSA: hda: fix possible NULL dereference ALSA: hda - Shutdown CX20722 on reboot/free to avoid spurious noises ALSA: usb: Add native DSD support for Gustard DAC-X20U
-
- 28 8月, 2015 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "Fix MSI/MSI-X on pseries from Guilherme" * tag 'powerpc-4.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/PCI: Disable MSI/MSI-X interrupts at PCI probe time in OF case PCI: Make pci_msi_setup_pci_dev() non-static for use by arch code
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Some straggler bug fixes here: 1) Netlink_sendmsg() doesn't check iterator type properly in mmap case, from Ken-ichirou MATSUZAWA. 2) Don't sleep in atomic context in bcmgenet driver, from Florian Fainelli. 3) The pfkey_broadcast() code patch can't actually ever use anything other than GFP_ATOMIC. And the cases that right now pass GFP_KERNEL or similar will currently trigger an RCU splat. Just use GFP_ATOMIC unconditionally. From David Ahern. 4) Fix FD bit timings handling in pcan_usb driver, from Marc Kleine-Budde. 5) Cache dst leaked in ip6_gre tunnel removal, fix from Huaibin Wang. 6) Traversal into drivers/net/ethernet/renesas should be triggered by CONFIG_NET_VENDOR_RENESAS, not a particular driver's config option. From Kazuya Mizuguchi. 7) Fix regression in handling of igmp_join errors in vxlan, from Marcelo Ricardo Leitner. 8) Make phy_{read,write}_mmd_indirect() properly take the mdio_lock mutex when programming the registers. From Russell King. 9) Fix non-forced handling in u32_destroy(), from WANG Cong. 10) Test the EVENT_NO_RUNTIME_PM flag before it is cleared in usbnet_stop(), from Eugene Shatokhin. 11) In sfc driver, don't fetch statistics firmware isn't capable of, from Bert Kenward. 12) Verify ASCONF address parameter location in SCTP, from Xin Long" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state sctp: asconf's process should verify address parameter is in the beginning sfc: only use vadaptor stats if firmware is capable net: phy: fixed: propagate fixed link values to struct usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared drivers: net: xgene: fix: Oops in linkwatch_fire_event cls_u32: complete the check for non-forced case in u32_destroy() net: fec: use reinit_completion() in mdio accessor functions net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect() vxlan: re-ignore EADDRINUSE from igmp_join net: compile renesas directory if NET_VENDOR_RENESAS is configured ip6_gre: release cached dst on tunnel removal phylib: Make PHYs children of their MDIO bus, not the bus' parent. can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters net: Fix RCU splat in af_key net: bcmgenet: fix uncleaned dma flags net: bcmgenet: Avoid sleeping in bcmgenet_timeout netlink: mmap: fix tx type check
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull nvdimm fixlet from Dan Williams: "This is a libnvdimm ABI fixup. I pushed back on this change quite hard given the late date, that it appears to be purely cosmetic, sysfs is not necessarily meant to be a user friendly UI, and the kernel interprets the reversed polarity of the ACPI_NFIT_MEM_ARMED flag correctly. When this flag is set, the energy source of an NVDIMM is not armed and any new writes to the DIMM may not be preserved. However, Bob Moore warned me that it is important to get these things named correctly wherever they appear otherwise we run the risk of a less than cautious firmware engineer implementing the polarity the wrong way. Once a mistake like that escapes into production platforms the flag becomes useless and we need to move to a new bit position. Bob has agreed to take a change through ACPICA to rename ACPI_NFIT_MEM_ARMED to ACPI_NFIT_MEM_NOT_ARMED, and the patch below from Toshi brings the sysfs representation of these flags in line with their respective polarities. Please pull for 4.2 as this is the first kernel to expose the ACPI NFIT sysfs representation, and this is likely a kernel that firmware developers will be using for checking out their NVDIMM enabling" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: Clarify memory device state flags strings
-
由 lucien 提交于
Commit f8d96052 ("sctp: Enforce retransmission limit during shutdown") fixed a problem with excessive retransmissions in the SHUTDOWN_PENDING by not resetting the association overall_error_count. This allowed the association to better enforce assoc.max_retrans limit. However, the same issue still exists when the association is in SHUTDOWN_RECEIVED state. In this state, HB-ACKs will continue to reset the overall_error_count for the association would extend the lifetime of association unnecessarily. This patch solves this by resetting the overall_error_count whenever the current state is small then SCTP_STATE_SHUTDOWN_PENDING. As a small side-effect, we end up also handling SCTP_STATE_SHUTDOWN_ACK_SENT and SCTP_STATE_SHUTDOWN_SENT states, but they are not really impacted because we disable Heartbeats in those states. Fixes: Commit f8d96052 ("sctp: Enforce retransmission limit during shutdown") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 lucien 提交于
in sctp_process_asconf(), we get address parameter from the beginning of the addip params. but we never check if it's really there. if the addr param is not there, it still can pass sctp_verify_asconf(), then to be handled by sctp_process_asconf(), it will not be safe. so add a code in sctp_verify_asconf() to check the address parameter is in the beginning, or return false to send abort. note that this can also detect multiple address parameters, and reject it. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NMarcelo Ricardo Leitner <mleitner@redhat.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Toshi Kani 提交于
ACPI 6.0 NFIT Memory Device State Flags in Table 5-129 defines NVDIMM status as follows. These bits indicate multiple info, such as failures, pending event, and capability. Bit [0] set to 1 to indicate that the previous SAVE to the Memory Device failed. Bit [1] set to 1 to indicate that the last RESTORE from the Memory Device failed. Bit [2] set to 1 to indicate that platform flush of data to Memory Device failed. As a result, the restored data content may be inconsistent even if SAVE and RESTORE do not indicate failure. Bit [3] set to 1 to indicate that the Memory Device is observed to be not armed prior to OSPM hand off. A Memory Device is considered armed if it is able to accept persistent writes. Bit [4] set to 1 to indicate that the Memory Device observed SMART and health events prior to OSPM handoff. /sys/bus/nd/devices/nmemX/nfit/flags shows this flags info. The output strings associated with the bits are "save", "restore", "smart", etc., which can be confusing as they may be interpreted as positive status, i.e. save succeeded. Change also the dev_info() message in acpi_nfit_register_dimms() to be consistent with the sysfs flags strings. Reported-by: NRobert Elliott <elliott@hp.com> Signed-off-by: NToshi Kani <toshi.kani@hp.com> [ross: rename 'not_arm' to 'not_armed'] Cc: Ross Zwisler <ross.zwisler@linux.intel.com> [djbw: defer adding bit5, HEALTH_ENABLED, for now] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Bert Kenward 提交于
Some of the stats handling code differs based on SR-IOV support, and SRIOV support is only available if full-featured firmware is used. Do not use vadaptor stats if firmware mode is not set to full-featured. Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Madalin Bucur 提交于
The fixed link values parsed from the device tree are stored in the struct fixed_phy member status. The struct phy_device members speed, duplex were not updated. Signed-off-by: NMadalin Bucur <madalin.bucur@freescale.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull amr64 kvm fix from Will Deacon: "We've uncovered a nasty bug in the arm64 KVM code which allows a badly behaved 32-bit guest to bring down the host. The fix is simple (it's what I believe we call a "brown paper bag" bug) and I don't think it makes sense to sit on this, particularly as Russell ended up triggering this rather than just somebody noticing a potential problem by inspection. Usually arm64 KVM changes would go via Paolo's tree, but he's on holiday at the moment and the deal is that anything urgent gets shuffled via the arch trees, so here it is. Summary: Fix arm64 KVM issue when injecting an abort into a 32-bit guest, which would lead to an illegal exception return at EL2 and a subsequent host crash" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: KVM: Fix host crash when injecting a fault into a 32bit guest
-
- 27 8月, 2015 2 次提交
-
-
由 Marc Zyngier 提交于
When injecting a fault into a misbehaving 32bit guest, it seems rather idiotic to also inject a 64bit fault that is only going to corrupt the guest state. This leads to a situation where we perform an illegal exception return at EL2 causing the host to crash instead of killing the guest. Just fix the stupid bug that has been there from day 1. Cc: <stable@vger.kernel.org> Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk> Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Two fixes in this pull request: - The writeback regression fix from Tejun, which has been weeks in the making. This fixes a case where we would sometimes not issue writeback when we should have. - An older fix for a memory corruption issue in mtip32xx. It was deferred since we wanted a better fix for this (driver should not have to handle that case), but given the timing, it's better to put the simple fix in for 4.2 release" * 'for-linus' of git://git.kernel.dk/linux-block: mtip32x: fix regression introduced by blk-mq per-hctx flush writeback: sync_inodes_sb() must write out I_DIRTY_TIME inodes and always call wait_sb_inodes()
-
- 26 8月, 2015 19 次提交
-
-
由 Guillermo A. Amaral 提交于
The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by: NGuillermo A. Amaral <g@maral.me> Signed-off-by: NTejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
-
由 Guilherme G. Piccoli 提交于
Since commit 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI"), the setup of dev->msi_cap/msix_cap and the disable of MSI/MSI-X interrupts isn't being done at PCI probe time, as the logic responsible for this was moved in the aforementioned commit from pci_device_add() to pci_setup_device(). The latter function is not reachable on PowerPC pseries platform during Open Firmware PCI probing time. This exhibits as drivers not being able to enable MSI, eg: bnx2x 0000:01:00.0: no msix capability found This patch calls pci_msi_setup_pci_dev() explicitly to disable MSI/MSI-X during PCI probe time on pSeries platform. Fixes: 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Flesh out change log and clarify comment] Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Guilherme G. Piccoli 提交于
Commit 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") changed the location of the code that initialises dev->msi_cap/msix_cap and then disables MSI/MSI-X interrupts at PCI probe time in devices that have this flag set. It moved the code from pci_msi_init_pci_dev() to a new function named pci_msi_setup_pci_dev(), called by pci_setup_device(). The pseries PCI probing code does not call pci_setup_device(), so since the aforementioned commit the function pci_msi_setup_pci_dev() is not called and MSI/MSI-X interrupts are left enabled. Additionally because dev->msi_cap/msix_cap are not initialised no driver can ever enable MSI/MSI-X. To fix this, the pseries PCI probe should manually call pci_msi_setup_pci_dev(), so this patch makes it non-static. Fixes: 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Update change log to mention dev->msi_cap/msix_cap] Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Eugene Shatokhin 提交于
It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in usbnet_stop(), but its value should be read before it is cleared when dev->flags is set to 0. The problem was spotted and the fix was provided by Oliver Neukum <oneukum@suse.de>. Signed-off-by: NEugene Shatokhin <eugene.shatokhin@rosalab.ru> Acked-by: NOliver Neukum <oneukum@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull LSM regression fix from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: LSM: restore certain default error codes
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull nvdimm fix from Dan Williams: "A single fix for status register read size in the nd_blk driver. The effect of getting the width of this register read wrong is that all I/O fails when the read returns non-zero. Given the availability of ACPI 6 NFIT enabled platforms, this could reasonably wait to come in during the 4.3 merge window with a tag for 4.2-stable. Otherwise, this makes the 4.2 kernel fully functional with devices that conform to the mmio-block-apertures defined in the ACPI 6 NFIT (NVDIMM Firmware Interface Table)" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit, nd_blk: BLK status register is only 32 bits
-
由 Iyappan Subramanian 提交于
[ 1065.801569] Internal error: Oops: 96000006 [#1] SMP ... [ 1065.866655] Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0 Apr 22 2015 [ 1065.873937] Workqueue: events_power_efficient phy_state_machine [ 1065.879837] task: fffffe01de105e80 ti: fffffe00bcf18000 task.ti: fffffe00bcf18000 [ 1065.887288] PC is at linkwatch_fire_event+0xac/0xc0 [ 1065.892141] LR is at linkwatch_fire_event+0xa0/0xc0 [ 1065.896995] pc : [<fffffe000060284c>] lr : [<fffffe0000602840>] pstate: 200001c5 [ 1065.904356] sp : fffffe00bcf1bd00 ... [ 1066.196813] Call Trace: [ 1066.199248] [<fffffe000060284c>] linkwatch_fire_event+0xac/0xc0 [ 1066.205140] [<fffffe000061167c>] netif_carrier_off+0x54/0x64 [ 1066.210773] [<fffffe00004f1654>] phy_state_machine+0x120/0x3bc [ 1066.216578] [<fffffe00000d8d10>] process_one_work+0x15c/0x3a8 [ 1066.222296] [<fffffe00000d9090>] worker_thread+0x134/0x470 [ 1066.227757] [<fffffe00000df014>] kthread+0xe0/0xf8 [ 1066.232525] Code: 97f65ee9 f9420660 d538d082 8b000042 (885f7c40) The fix is to call phy_disconnect() from xgene_enet_mdio_remove, which in turn call cancel_delayed_work_sync(). Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
In commit 1e052be6 ("net_sched: destroy proto tp when all filters are gone") I added a check in u32_destroy() to see if all real filters are gone for each tp, however, that is only done for root_ht, same is needed for others. This can be reproduced by the following tc commands: tc filter add dev eth0 parent 1:0 prio 5 handle 15: protocol ip u32 divisor 256 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:2 u32 ht 15:2: match ip src 10.0.0.2 flowid 1:10 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:3 u32 ht 15:2: match ip src 10.0.0.3 flowid 1:10 Fixes: 1e052be6 ("net_sched: destroy proto tp when all filters are gone") Reported-by: NAkshat Kakkar <akshat.1984@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Beulich 提交于
While in most cases commit b1d9e6b0 ("LSM: Switch to lists of hooks") retained previous error returns, in three cases it altered them without any explanation in the commit message. Restore all of them - in the security_old_inode_init_security() case this led to reiserfs using uninitialized data, sooner or later crashing the system (the only other user of this function - ocfs2 - was unaffected afaict, since it passes pre-initialized structures). Signed-off-by: NJan Beulich <jbeulich@suse.com> Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Ross Zwisler 提交于
Only read 32 bits for the BLK status register in read_blk_stat(). The format and size of this register is defined in the "NVDIMM Driver Writer's guide": http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdfSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Reported-by: NNicholas Moulin <nicholas.w.moulin@linux.intel.com> Tested-by: NNicholas Moulin <nicholas.w.moulin@linux.intel.com> Reviewed-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Russell King 提交于
Rather than re-initialising the entire completion on every mdio access, use reinit_completion() which only resets the completion count. This avoids possible reinitialisation of the contained spinlock and waitqueue while they may be in use (eg, mid-completion.) Such an event could occur if there's a long delay in interrupt handling causing the mdio accessor to time out, then a second access comes in while the interrupt handler on a different CPU has called complete(). Another scenario where this has been observed is while locking has been missing at the phy layer, allowing concurrent attempts to access the MDIO bus. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
The phy layer is missing locking for the above two functions - it has been observed that two threads (userspace and the phy worker thread) can race, entering the bus ->write or ->read functions simultaneously. This causes the FEC driver to initialise a completion while another thread is waiting on it or while the interrupt is calling complete() on it, which causes spinlock unlock-without-lock, spinlock lockups, and completion timeouts. Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers.") Fixes: 0c1d77df ("net: libphy: Add phy specific function to access mmd phy registers") Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
Before 56ef9c90[1] it used to ignore all errors from igmp_join(). That commit enhanced that and made it error out whatever error happened with igmp_join(), but that's not good because when using multicast groups vxlan will try to join it multiple times if the socket is reused and then the 2nd and further attempts will fail with EADDRINUSE. As we don't track to which groups the socket is already subscribed, it's okay to just ignore that error. Fixes: 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope") Reported-by: NJohn Nielsen <lists@jnielsen.net> Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'linux-can-fixes-for-4.2-20150825' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is the updated pull request of one patch by me for the peak_usb driver. It fixes the driver, so that non FD adapters don't provide CAN FD bittimings. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kazuya Mizuguchi 提交于
Currently the renesas ethernet driver directory is compiled if SH_ETH is configured rather than NET_VENDOR_RENESAS. Although incorrect that was quite harmless as until recently as SH_ETH configured the only driver in the renesas directory. However, as of c156633f ("Renesas Ethernet AVB driver proper") the renesas directory includes another driver, configured by RAVB, and it makes little sense for it to have a hidden dependency on SH_ETH. Signed-off-by: NKazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [horms: rewrote changelog] Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 huaibin Wang 提交于
When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov <xeb@mail.ru> Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by: Nhuaibin Wang <huaibin.wang@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Moyer 提交于
Hi, After commit f70ced09 (blk-mq: support per-distpatch_queue flush machinery), the mtip32xx driver may oops upon module load due to walking off the end of an array in mtip_init_cmd. On initialization of the flush_rq, init_request is called with request_index >= the maximum queue depth the driver supports. For mtip32xx, this value is used to index into an array. What this means is that the driver will walk off the end of the array, and either oops or cause random memory corruption. The problem is easily reproduced by doing modprobe/rmmod of the mtip32xx driver in a loop. I can typically reproduce the problem in about 30 seconds. Now, in the case of mtip32xx, it actually doesn't support flush/fua, so I think we can simply return without doing anything. In addition, no other mq-enabled driver does anything with the request_index passed into init_request(), so no other driver is affected. However, I'm not really sure what is expected of drivers. Ming, what did you envision drivers would do when initializing the flush requests? Signed-off-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Tejun Heo 提交于
e7972912 ("writeback: don't issue wb_writeback_work if clean") updated writeback path to avoid kicking writeback work items if there are no inodes to be written out; unfortunately, the avoidance logic was too aggressive and broke sync_inodes_sb(). * sync_inodes_sb() must write out I_DIRTY_TIME inodes but I_DIRTY_TIME inodes dont't contribute to bdi/wb_has_dirty_io() tests and were being skipped over. * inodes are taken off wb->b_dirty/io/more_io lists after writeback starts on them. sync_inodes_sb() skipping wait_sb_inodes() when bdi_has_dirty_io() breaks it by making it return while writebacks are in-flight. This patch fixes the breakages by * Removing bdi_has_dirty_io() shortcut from bdi_split_work_to_wbs(). The callers are already testing the condition. * Removing bdi_has_dirty_io() shortcut from sync_inodes_sb() so that it always calls into bdi_split_work_to_wbs() and wait_sb_inodes(). * Making bdi_split_work_to_wbs() consider the b_dirty_time list for WB_SYNC_ALL writebacks. Kudos to Eryu, Dave and Jan for tracking down the issue. Signed-off-by: NTejun Heo <tj@kernel.org> Fixes: e7972912 ("writeback: don't issue wb_writeback_work if clean") Link: http://lkml.kernel.org/g/20150812101204.GE17933@dhcp-13-216.nay.redhat.comReported-and-bisected-by: NEryu Guan <eguan@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.com> Cc: Ted Ts'o <tytso@google.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 David Daney 提交于
commit 18ee49dd ("phylib: rename mii_bus::dev to mii_bus::parent") changed the parent of PHY devices from the bus to the bus parent. Then, commit 4dea547f ("phylib: rework to prepare for OF registration of PHYs") moved the code into phy_device.c At this point, it is somewhat unclear why the change was seen as necessary. But, when we look at the device model tree in /sys/devices, it is clearly incorrect. The PHYs should be children of their MDIO bus. Change the PHY's parent device to be the MDIO bus device. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NDavid Daney <david.daney@cavium.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-