- 21 6月, 2016 2 次提交
-
-
由 Al Viro 提交于
Return nth positive child after given or NULL if there's less than n left. dcache_readdir() and dcache_dir_lseek() switched to it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Make sure that directory is locked shared in dcache_dir_lseek(); for dcache_readdir() it's already tru, and that's enough to make simple_positive() stable. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 10 6月, 2016 1 次提交
-
-
由 Al Viro 提交于
d_walk() relies upon the tree not getting rearranged under it without rename_lock being touched. And we do grab rename_lock around the places that change the tree topology. Unfortunately, branch reordering is just as bad from d_walk() POV and we have two places that do it without touching rename_lock - one in handling of cursors (for ramfs-style directories) and another in autofs. autofs one is a separate story; this commit deals with the cursors. * mark cursor dentries explicitly at allocation time * make __dentry_kill() leave ->d_child.next pointing to the next non-cursor sibling, making sure that it won't be moved around unnoticed before the parent is relocked on ascend-to-parent path in d_walk(). * make d_walk() skip cursors explicitly; strictly speaking it's not necessary (all callbacks we pass to d_walk() are no-ops on cursors), but it makes analysis easier. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 5月, 2016 1 次提交
-
-
由 Al Viro 提交于
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before we'd hashed the new dentry and attached it to inode, we need ->setxattr() instances getting the inode as an explicit argument rather than obtaining it from dentry. Similar change for ->getxattr() had been done in commit ce23e640. Unlike ->getxattr() (which is used by both selinux and smack instances of ->d_instantiate()) ->setxattr() is used only by smack one and unfortunately it got missed back then. Reported-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Tested-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 09 5月, 2016 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 03 5月, 2016 1 次提交
-
-
由 Al Viro 提交于
no need to lock directory in dcache_dir_lseek(), while we are at it - per-struct file exclusion is enough. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 4月, 2016 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 05 4月, 2016 1 次提交
-
-
由 Kirill A. Shutemov 提交于
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 1月, 2016 1 次提交
-
-
由 Al Viro 提交于
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 31 12月, 2015 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 30 12月, 2015 1 次提交
-
-
由 Al Viro 提交于
all callers are better off with kfree_put_link() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 09 12月, 2015 1 次提交
-
-
由 Al Viro 提交于
new method: ->get_link(); replacement of ->follow_link(). The differences are: * inode and dentry are passed separately * might be called both in RCU and non-RCU mode; the former is indicated by passing it a NULL dentry. * when called that way it isn't allowed to block and should return ERR_PTR(-ECHILD) if it needs to be called in non-RCU mode. It's a flagday change - the old method is gone, all in-tree instances converted. Conversion isn't hard; said that, so far very few instances do not immediately bail out when called in RCU mode. That'll change in the next commits. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 13 8月, 2015 1 次提交
-
-
由 Eric W. Biederman 提交于
Before the make_empty_dir_inode calls were introduce into proc, sysfs, and sysctl those directories when stated reported an i_size of 0. make_empty_dir_inode started reporting an i_size of 2. At least one userspace application depended on stat returning i_size of 0. So modify make_empty_dir_inode to cause an i_size of 0 to be reported for these directories. Cc: stable@vger.kernel.org Reported-by: NTejun Heo <tj@kernel.org> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 01 7月, 2015 1 次提交
-
-
由 Eric W. Biederman 提交于
To ensure it is safe to mount proc and sysfs I need to check if filesystems that are mounted on top of them are mounted on truly empty directories. Given that some directories can gain entries over time, knowing that a directory is empty right now is insufficient. Therefore add supporting infrastructure for permantently empty directories that proc and sysfs can use when they create mount points for filesystems and fs_fully_visible can use to test for permanently empty directories to ensure that nothing will be gained by mounting a fresh copy of proc or sysfs. Cc: stable@vger.kernel.org Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 24 6月, 2015 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 5月, 2015 5 次提交
-
-
由 Al Viro 提交于
similar to kfree_put_link() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
only one instance looks at that argument at all; that sole exception wants inode rather than dentry. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
its only use is getting passed to nd_jump_link(), which can obtain it from current->nameidata Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
a) instead of storing the symlink body (via nd_set_link()) and returning an opaque pointer later passed to ->put_link(), ->follow_link() _stores_ that opaque pointer (into void * passed by address by caller) and returns the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic symlinks) and pointer to symlink body for normal symlinks. Stored pointer is ignored in all cases except the last one. Storing NULL for opaque pointer (or not storing it at all) means no call of ->put_link(). b) the body used to be passed to ->put_link() implicitly (via nameidata). Now only the opaque pointer is. In the cases when we used the symlink body to free stuff, ->follow_link() now should store it as opaque pointer in addition to returning it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
let "fast" symlinks store the pointer to the body into ->i_link and use simple_follow_link for ->follow_link() Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 4月, 2015 1 次提交
-
-
由 David Howells 提交于
library helpers called by filesystem drivers on their own inodes Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 23 2月, 2015 1 次提交
-
-
由 David Howells 提交于
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 05 2月, 2015 1 次提交
-
-
由 Theodore Ts'o 提交于
Add a new mount option which enables a new "lazytime" mode. This mode causes atime, mtime, and ctime updates to only be made to the in-memory version of the inode. The on-disk times will only get updated when (a) if the inode needs to be updated for some non-time related change, (b) if userspace calls fsync(), syncfs() or sync(), or (c) just before an undeleted inode is evicted from memory. This is OK according to POSIX because there are no guarantees after a crash unless userspace explicitly requests via a fsync(2) call. For workloads which feature a large number of random write to a preallocated file, the lazytime mount option significantly reduces writes to the inode table. The repeated 4k writes to a single block will result in undesirable stress on flash devices and SMR disk drives. Even on conventional HDD's, the repeated writes to the inode table block will trigger Adjacent Track Interference (ATI) remediation latencies, which very negatively impact long tail latencies --- which is a very big deal for web serving tiers (for example). Google-Bug-Id: 18297052 Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 04 11月, 2014 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 08 10月, 2014 1 次提交
-
-
由 Jeff Layton 提交于
In later patches, we're going to add a new lock_manager_operation to finish setting up the lease while still holding the i_lock. To do this, we'll need to pass a little bit of info in the fcntl setlease case (primarily an fasync structure). Plumb the extra pointer into there in advance of that. We declare this pointer as a void ** to make it clear that this is private info, and that the caller isn't required to set this unless the lm_setup specifically requires it. Signed-off-by: NJeff Layton <jlayton@primarydata.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 10 9月, 2014 1 次提交
-
-
由 Jeff Layton 提交于
GFS2 and NFS have setlease routines that always just return -EINVAL. Turn that into a generic routine that can live in fs/libfs.c. Cc: <linux-nfs@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: <cluster-devel@redhat.com> Signed-off-by: NJeff Layton <jlayton@primarydata.com> Acked-by: NTrond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 05 6月, 2014 1 次提交
-
-
由 Fabian Frederick 提交于
Description by Jan Kara: "A lot of older filesystems don't properly flush volatile disk caches on fsync(2) which can lead to loss of fsynced data after power failure. This patch makes generic_file_fsync() issue proper cache flush to fix the problem. Sysadmin can use /sys/devices/.../cache_type to tell the system it should not send the cache flush." [akpm@linux-foundation.org: nuke ifdef] [akpm@linux-foundation.org: fix warning] Signed-off-by: NFabian Frederick <fabf@skynet.be> Suggested-by: NJan Kara <jack@suse.cz> Suggested-by: NChristoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 11月, 2013 1 次提交
-
-
由 Al Viro 提交于
Rename simple_delete_dentry() to always_delete_dentry() and export it. Export simple_dentry_operations, while we are at it, and get rid of their duplicates Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 09 11月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 10月, 2013 2 次提交
-
-
由 Al Viro 提交于
duplicated to hell and back... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 7月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 29 6月, 2013 1 次提交
-
-
由 Al Viro 提交于
new helpers - dir_emit_dot(file, ctx, dentry), dir_emit_dotdot(file, ctx), dir_emit_dots(file, ctx). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 12月, 2012 1 次提交
-
-
由 Marco Stornelli 提交于
Removed vmtruncate Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 18 12月, 2012 1 次提交
-
-
由 Andrew Morton 提交于
But the kernel decided to call it "origin" instead. Fix most of the sites. Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 9月, 2012 1 次提交
-
-
由 Yanchuan Nian 提交于
Wrong function name in the kerneldoc description of generic_fh_to_parent(). Signed-off-by: NYanchuan Nian <ycnian@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 14 7月, 2012 2 次提交
-
-
由 David Howells 提交于
Pass mount flags to sget() so that it can use them in initialising a new superblock before the set function is called. They could also be passed to the compare function. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Just the flags; only NFS cares even about that, but there are legitimate uses for such argument. And getting rid of that completely would require splitting ->lookup() into a couple of methods (at least), so let's leave that alone for now... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 5月, 2012 1 次提交
-
-
由 Linus Torvalds 提交于
This allows comparing hash and len in one operation on 64-bit architectures. Right now only __d_lookup_rcu() takes advantage of this, since that is the case we care most about. The use of anonymous struct/unions hides the alternate 64-bit approach from most users, the exception being a few cases where we initialize a 'struct qstr' with a static initializer. This makes the problematic cases use a new QSTR_INIT() helper function for that (but initializing just the name pointer with a "{ .name = xyzzy }" initializer remains valid, as does just copying another qstr structure). Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 4月, 2012 1 次提交
-
-
由 Al Viro 提交于
d_genocide() does _not_ evict dentries; it just removes extra ref pinning each of those. Normally it's followed by shrinking the tree (it's done just before generic_shutdown_super() by kill_litter_super()), but in case of simple_fill_super() nothing of that kind will follow. Just do shrink_dcache_parent() manually. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-