- 08 3月, 2014 18 次提交
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A number of ARM updates for -rc, covering mostly ARM specific code, but with one change to modpost.c to allow Thumb section mismatches to be detected. ARM changes include reporting when an attempt is made to boot a LPAE kernel on hardware which does not support LPAE, rather than just being silent about it. A number of other minor fixes are included too" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7992/1: boot: compressed: ignore bswapsdi2.S ARM: 7991/1: sa1100: fix compile problem on Collie ARM: fix noMMU kallsyms symbol filtering ARM: 7980/1: kernel: improve error message when LPAE config doesn't match CPU ARM: 7964/1: Detect section mismatches in thumb relocations ARM: 7963/1: mm: report both sections from PMD
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "A small collection of minor fixes. The FPU stuff is still pending, I fear. I haven't heard anything from Suresh so I suspect I'm going to have to dig into the init specifics myself and fix up the patchset" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Ignore NMIs that come in during early boot x86, trace: Further robustify CR2 handling vs tracing x86, trace: Fix CR2 corruption when tracing page faults x86/efi: Quirk out SGI UV
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull power fixes from Ben Herrenschmidt: "Here are a couple of powerpc fixes for 3.14. One is (another!) nasty TM problem, we can crash the kernel by forking inside a transaction. The other one is a simple fix for an alignment issue which can hurt in LE mode" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Align p_dyn, p_rela and p_st symbols powerpc/tm: Fix crash when forking inside a transaction
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "In the past, I've had lots of reports about trace events not working. Developers would say they put a trace_printk() before and after the trace event but when they enable it (and the trace event said it was enabled) they would see the trace_printks but not the trace event. I was not able to reproduce this, but that's because I wasn't looking at the right location. Recently, another bug came up that showed the issue. If your kernel supports signed modules but allows for non-signed modules to be loaded, then when one is, the kernel will silently set the MODULE_FORCED taint on the module. Although, this taint happens without the need for insmod --force or anything of the kind, it labels the module with that taint anyway. If this tainted module has tracepoints, the tracepoints will be ignored because of the MODULE_FORCED taint. But no error message will be displayed. Worse yet, the event infrastructure will still be created letting users enable the trace event represented by the tracepoint, although that event will never actually be enabled. This is because the tracepoint infrastructure allows for non-existing tracepoints to be enabled for new modules to arrive and have their tracepoints set. Although there are several things wrong with the above, this change only addresses the creation of the trace event files for tracepoints that are not created when a module is loaded and is tainted. This change will print an error message about the module being tainted and not the trace events will not be created, and it does not create the trace event infrastructure" * tag 'trace-fixes-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not add event files for modules that fail tracepoints
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: - a bugfix for a long standing waitqueue race - a trivial fix for a missing include * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Include missing header file in irqdomain.c genirq: Remove racy waitqueue_active check
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: - dm-cache memory allocation failure fix - fix DM's Kconfig identation - dm-snapshot metadata corruption fix for bug introduced in 3.14-rc1 - important refcount < 0 fix for the DM persistent data library's space map metadata interface which fixes corruption reported by a few dm-thinp users and last but not least: - more extensive fixes than ideal for dm-thinp's data resize capability (which has had growing pain much like we've seen from -ENOSPC handling of filesystems that mature). The end result is dm-thinp now handles metadata operation failure and no data space error conditions much better than before. * tag 'dm-3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm space map metadata: fix refcount decrement below 0 which caused corruption dm thin: fix Documentation for held metadata root feature dm thin: fix noflush suspend IO queueing dm thin: fix deadlock in __requeue_bio_list dm thin: fix out of data space handling dm thin: ensure user takes action to validate data and metadata consistency dm thin: synchronize the pool mode during suspend dm snapshot: fix metadata corruption dm: fix Kconfig indentation dm cache mq: fix memory allocation failure for large cache devices
-
由 H. Peter Anvin 提交于
Don Zickus reports: A customer generated an external NMI using their iLO to test kdump worked. Unfortunately, the machine hung. Disabling the nmi_watchdog made things work. I speculated the external NMI fired, caused the machine to panic (as expected) and the perf NMI from the watchdog came in and was latched. My guess was this somehow caused the hang. ---- It appears that the latched NMI stays latched until the early page table generation on 64 bits, which causes exceptions to happen which end in IRET, which re-enable NMI. Therefore, ignore NMIs that come in during early execution, until we have proper exception handling. Reported-and-tested-by: NDon Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1394221143-29713-1-git-send-email-dzickus@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.5+, older with some backport effort
-
由 Mark Rutland 提交于
Commit 017f161a (ARM: 7877/1: use built-in byte swap function) added bswapsdi2.{o,S} to arch/arm/boot/compressed/Makefile, but didn't update the .gitignore. Thus after a a build git status shows bswapsdi2.S as a new file, which is a little annoying. This patch updates arch/arm/boot/compressed/.gitignore to ignore bswapsdi2.S, as we already do for ashldi3.S and others. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NKim Phillips <kim.phillips@freescale.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
Due to a problem in the MFD Kconfig it was not possible to compile the UCB battery driver for the Collie SA1100 system, in turn making it impossible to compile in the battery driver. (See patch "mfd: include all drivers in subsystem menu".) After fixing the MFD Kconfig (separate patch) a compile error appears in the Collie battery driver due to the <mach/collie.h> implicitly requiring <mach/hardware.h> through <linux/gpio.h> via <mach/gpio.h> prior to commit 40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface". Fix this up by including the required header into <mach/collie.h>. Cc: stable@vger.kernel.org Cc: Andrea Adami <andrea.adami@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
With noMMU, CONFIG_PAGE_OFFSET was not being set correctly. As there's no MMU, PAGE_OFFSET should be equal to PHYS_OFFSET in all cases. This commit makes that explicit. Since we do this, we don't need to mess around in asm/memory.h with ifdefs to sort this out, so let's get rid of that, and there's no point offering the "Memory split" option for noMMU as that's meaningless there. Fixes: b9b32bf7 ("ARM: use linker magic for vectors and vector stubs") Cc: <stable@vger.kernel.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Vineet Gupta 提交于
This fixes a subtle issue with cache flush which could potentially cause random userspace crashes because of stale icache lines. This error crept in when consolidating the cache flush code Fixes: bd12976c (ARC: cacheflush refactor #3: Unify the {d,i}cache) Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 3.13 Cc: arc-linux-dev@synopsys.com Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Just a few device-specific quirks for HD-audio and USB-audio, most of which are one-liners" * tag 'sound-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add quirk for Logitech Webcam C500 ALSA: hda - Use analog beep for Thinkpads with AD1984 codecs ALSA: hda - Add missing loopback merge path for AD1884/1984 codecs ALSA: hda - add automute fix for another dell AIO model ALSA: hda - Added inverted digital-mic handling for Acer TravelMate 8371
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Mostly intel and radeon fixes, one tda998x, one kconfig dep fix and two more MAINTAINERS updates, All pretty run of the mill for this stage" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/atom: select the proper number of lanes in transmitter setup MAINTAINERS: add maintainer entry for TDA998x driver drm: fix bochs kconfig dependencies drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters drm/radeon/cik: fix typo in documentation drm/radeon: silence GCC warning on 32 bit drm/radeon: resume old pm late drm/radeon: TTM must be init with cpu-visible VRAM, v2 DRM: armada: fix use of kfifo_put() drm/i915: Reject >165MHz modes w/ DVI monitors drm/i915: fix assert_cursor on BDW drm/i915: vlv: reserve GT power context early drm/i915: fix pch pci device enumeration drm/i915: Resolving the memory region conflict for Stolen area drm/i915: use backlight legacy combination mode also for i915gm/i945gm MAINTAINERS: update AGP tree to point at drm tree
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Small collection of fixes for 3.14-rc. It contains: - Three minor update to blk-mq from Christoph. - Reduce number of unaligned (< 4kb) in-flight writes on mtip32xx to two. From Micron. - Make the blk-mq CPU notify spinlock raw, since it can't be a sleeper spinlock on RT. From Mike Galbraith. - Drop now bogus BUG_ON() for bio iteration with blk integrity. From Nic Bellinger. - Properly propagate the SYNC flag on requests. From Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: add REQ_SYNC early rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock bio-integrity: Drop bio_integrity_verify BUG_ON in post bip->bip_iter world blk-mq: support partial I/O completions blk-mq: merge blk_mq_insert_request and blk_mq_run_request blk-mq: remove blk_mq_alloc_rq mtip32xx: Reduce the number of unaligned writes to 2
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: "This is a set of pin control fixes I have collected over the last few days. Some have rotated more than others in linux-next, but they were rebased on v3.14-rc5 due to sloppy commit messages. I am quite convinced that they are all good fixes that only hit this or that individual driver and not the entire subsystem. - Fix chained interrupts, interrupt masking and register offset calculation for the sunxi driver - Make MSM a bool rather than a tristate to stop build problems to happen - chained interrupt controllers cannot currently be defined in modules - Fix a clock in the PFC driver - Fix a kernel panic in the sirf driver" * tag 'pinctrl-v3.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sirf: fix kernel panic in gpio_lock_as_irq pinctrl: sh-pfc: r8a7791: SD1_CLK fix pinctrl: msm: make PINCTRL_MSM bool instead of tristate pinctrl: sunxi: Fix interrupt register offset calculation pinctrl: sunxi: Fix masking when setting irq type pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull Xen fix from Konrad Rzeszutek Wilk: "This has exactly one patch for Xen ARM. It sets the dependency to compile the kernel with MMU enabled - otherwise - the guest won't work very well" * tag 'stable/for-linus-3.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: ARM: XEN depends on having a MMU
-
git://linux-c6x.org/git/projects/linux-c6x-upstreaming由 Linus Torvalds 提交于
Pull c6x build fix from Mark Salter: "Build fix for c6x" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: c6x: fix build failure caused by cache.h
-
由 Joe Thornber 提交于
This has been a relatively long-standing issue that wasn't nailed down until Teng-Feng Yang's meticulous bug report to dm-devel on 3/7/2014, see: http://www.redhat.com/archives/dm-devel/2014-March/msg00021.html From that report: "When decreasing the reference count of a metadata block with its reference count equals 3, we will call dm_btree_remove() to remove this enrty from the B+tree which keeps the reference count info in metadata device. The B+tree will try to rebalance the entry of the child nodes in each node it traversed, and the rebalance process contains the following steps. (1) Finding the corresponding children in current node (shadow_current(s)) (2) Shadow the children block (issue BOP_INC) (3) redistribute keys among children, and free children if necessary (issue BOP_DEC) Since the update of a metadata block's reference count could be recursive, we will stash these reference count update operations in smm->uncommitted and then process them in a FILO fashion. The problem is that step(3) could free the children which is created in step(2), so the BOP_DEC issued in step(3) will be carried out before the BOP_INC issued in step(2) since these BOPs will be processed in FILO fashion. Once the BOP_DEC from step(3) tries to decrease the reference count of newly shadow block, it will report failure for its reference equals 0 before decreasing. It looks like we can solve this issue by processing these BOPs in a FIFO fashion instead of FILO." Commit 5b564d80 ("dm space map: disallow decrementing a reference count below zero") changed the code to report an error for this temporary refcount decrement below zero. So what was previously a harmless invalid refcount became a hard failure due to the new error path: device-mapper: space map common: unable to decrement a reference count below 0 device-mapper: thin: 253:6: dm_thin_insert_block() failed: error = -22 device-mapper: thin: 253:6: switching pool to read-only mode This bug is in dm persistent-data code that is common to the DM thin and cache targets. So any users of those targets should apply this fix. Fix this by applying recursive space map operations in FIFO order rather than FILO. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=68801Reported-by: NApollon Oikonomopoulos <apoikos@debian.org> Reported-by: edwillam1007@gmail.com Reported-by: NTeng-Feng Yang <shinrairis@gmail.com> Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.13+
-
- 07 3月, 2014 16 次提交
-
-
由 Shaohua Li 提交于
Add REQ_SYNC early, so rq_dispatched[] in blk_mq_rq_ctx_init is set correctly. Signed-off-by: Shaohua Li<shli@fusionio.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Anton Blanchard 提交于
The 64bit relocation code places a few symbols in the text segment. These symbols are only 4 byte aligned where they need to be 8 byte aligned. Add an explicit alignment. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Tested-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
When we fork/clone we currently don't copy any of the TM state to the new thread. This results in a TM bad thing (program check) when the new process is switched in as the kernel does a tmrechkpt with TEXASR FS not set. Also, since R1 is from userspace, we trigger the bad kernel stack pointer detection. So we end up with something like this: Bad kernel stack pointer 0 at c0000000000404fc cpu 0x2: Vector: 700 (Program Check) at [c00000003ffefd40] pc: c0000000000404fc: restore_gprs+0xc0/0x148 lr: 0000000000000000 sp: 0 msr: 9000000100201030 current = 0xc000001dd1417c30 paca = 0xc00000000fe00800 softe: 0 irq_happened: 0x01 pid = 0, comm = swapper/2 WARNING: exception is not recoverable, can't continue The below fixes this by flushing the TM state before we copy the task_struct to the clone. To do this we go through the tmreclaim patch, which removes the checkpointed registers from the CPU and transitions the CPU out of TM suspend mode. Hence we need to call tmrechkpt after to restore the checkpointed state and the TM mode for the current task. To make this fail from userspace is simply: tbegin li r0, 2 sc <boom> Kudos to Adhemerval Zanella Neto for finding this. Signed-off-by: NMichael Neuling <mikey@neuling.org> cc: Adhemerval Zanella Neto <azanella@br.ibm.com> cc: stable@vger.kernel.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
one more radeon fix. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/atom: select the proper number of lanes in transmitter setup
-
由 Alex Deucher 提交于
We need to check for DVI vs. HDMI when setting up duallink since HDMI is single link only. Fixes 4k modes on newer asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75223Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Russell King 提交于
Add a maintainers entry for the TDA998x driver. Rob Clark has handed this driver over to me to look after. Acked-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://ftp.arm.linux.org.uk/~rmk/linux-cubox由 Dave Airlie 提交于
fix for kfifo api change. * 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: DRM: armada: fix use of kfifo_put()
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
a few more radeon fixes. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters drm/radeon/cik: fix typo in documentation drm/radeon: silence GCC warning on 32 bit drm/radeon: resume old pm late drm/radeon: TTM must be init with cpu-visible VRAM, v2
-
由 Alex Deucher 提交于
Should be at 0x8 rather than 0. fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60523 Noticed by ArtForz on #radeon Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Copy-paste typo. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Paul Bolle 提交于
Building radeon_ttm.o on 32 bit x86 triggers a warning: In file included from include/asm-generic/bug.h:13:0, from [...]/arch/x86/include/asm/bug.h:38, from include/linux/bug.h:4, from include/drm/drm_mm.h:39, from include/drm/drm_vma_manager.h:26, from include/drm/ttm/ttm_bo_api.h:35, from drivers/gpu/drm/radeon/radeon_ttm.c:32: drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_ttm_gtt_read': include/linux/kernel.h:712:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ ^ drivers/gpu/drm/radeon/radeon_ttm.c:938:22: note: in expansion of macro 'min' ssize_t cur_size = min(size, PAGE_SIZE - off); ^ Silence this warning by using min_t(). Since cur_size will never be negative and its upper bound is PAGE_SIZE, we can change its type to size_t and use min_t(size_t, [...]) here. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Moving the pm resume up in the init order to fix dpm seems to have regressed somes cases with the old pm code. Move it back to late resume. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Lauri Kasanen 提交于
Without this, a bo may get created in the cpu-inaccessible vram. Before the CP engines get setup, all copies are done via cpu memcpy. This means that the cpu tries to read from inaccessible memory, fails, and the radeon module proceeds to disable acceleration. Doing this has no downsides, as the real VRAM size gets set as soon as the CP engines get init. This is a candidate for 3.14 fixes. v2: Add comment on why the function is used Signed-off-by: NLauri Kasanen <cand@gmx.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
-
由 Mike Snitzer 提交于
The Documentation for the thin provisioning target's held metadata root feature was incorrect. It is now available and the value for the held metadata root is in block units (not 512b sectors). Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Peter Zijlstra 提交于
Building on commit 0ac09f9f ("x86, trace: Fix CR2 corruption when tracing page faults") this patch addresses another few issues: - Now that read_cr2() is lifted into trace_do_page_fault(), we should pass the address to trace_page_fault_entries() to avoid it re-reading a potentially changed cr2. - Put both trace_do_page_fault() and trace_page_fault_entries() under CONFIG_TRACING. - Mark both fault entry functions {,trace_}do_page_fault() as notrace to avoid getting __mcount or other function entry trace callbacks before we've observed CR2. - Mark __do_page_fault() as noinline to guarantee the function tracer does get to see the fault. Cc: <jolsa@redhat.com> Cc: <vincent.weaver@maine.edu> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140306145300.GO9987@twins.programming.kicks-ass.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 06 3月, 2014 4 次提交
-
-
由 Joe Thornber 提交于
i) by the time DM core calls the postsuspend hook the dm_noflush flag has been cleared. So the old thin_postsuspend did nothing. We need to use the presuspend hook instead. ii) There was a race between bios leaving DM core and arriving in the deferred queue. thin_presuspend now sets a 'requeue' flag causing all bios destined for that thin to be requeued back to DM core. Then it requeues all held IO, and all IO on the deferred queue (destined for that thin). Finally postsuspend clears the 'requeue' flag. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Joe Thornber 提交于
The spin lock in requeue_io() was held for too long, allowing deadlock. Don't worry, due to other issues addressed in the following "dm thin: fix noflush suspend IO queueing" commit, this code was never called. Fix this by taking the spin lock for a much shorter period of time. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Joe Thornber 提交于
Ideally a thin pool would never run out of data space; the low water mark would trigger userland to extend the pool before we completely run out of space. However, many small random IOs to unprovisioned space can consume data space at an alarming rate. Adjust your low water mark if you're frequently seeing "out-of-data-space" mode. Before this fix, if data space ran out the pool would be put in PM_READ_ONLY mode which also aborted the pool's current metadata transaction (data loss for any changes in the transaction). This had a side-effect of needlessly compromising data consistency. And retry of queued unserviceable bios, once the data pool was resized, could initiate changes to potentially inconsistent pool metadata. Now when the pool's data space is exhausted transition to a new pool mode (PM_OUT_OF_DATA_SPACE) that allows metadata to be changed but data may not be allocated. This allows users to remove thin volumes or discard data to recover data space. The pool is no longer put in PM_READ_ONLY mode in response to the pool running out of data space. And PM_READ_ONLY mode no longer aborts the pool's current metadata transaction. Also, set_pool_mode() will now notify userspace when the pool mode is changed. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Mike Snitzer 提交于
If a thin metadata operation fails the current transaction will abort, whereby causing potential for IO layers up the stack (e.g. filesystems) to have data loss. As such, set THIN_METADATA_NEEDS_CHECK_FLAG in the thin metadata's superblock which: 1) requires the user verify the thin metadata is consistent (e.g. use thin_check, etc) 2) suggests the user verify the thin data is consistent (e.g. use fsck) The only way to clear the superblock's THIN_METADATA_NEEDS_CHECK_FLAG is to run thin_repair. On metadata operation failure: abort current metadata transaction, set pool in read-only mode, and now set the needs_check flag. As part of this change, constraints are introduced or relaxed: * don't allow a pool to transition to write mode if needs_check is set * don't allow data or metadata space to be resized if needs_check is set * if a thin pool's metadata space is exhausted: the kernel will now force the user to take the pool offline for repair before the kernel will allow the metadata space to be extended. Also, update Documentation to include information about when the thin provisioning target commits metadata, how it handles metadata failures and running out of space. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NJoe Thornber <ejt@redhat.com>
-
- 05 3月, 2014 2 次提交
-
-
由 Takashi Iwai 提交于
Logitech C500 (046d:0807) needs the same workaround like other Logitech Webcams. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
For making the driver behavior compatible with the earlier kernels, use the analog beep in the loopback path instead of the digital beep. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-