This use of netdev->priv is wrong.
The right way is:
alloc_netdev() with no memory for private data.
make netdev->ml_priv to point to c2_dev.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Acked-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. convert netdev->priv to netdev_priv().
2. make sbni_pci_probe() be static.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Freeing previously allocated buffers in case of error.
Signed-off-by: NJirka Pirko <jirka@pirko.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pointed out by Joe Perches. Error message after tx_ring allocation check was
wrong.
Signed-off-by: NJirka Pirko <jirka@jirka.pirko.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed typo when allocating rx_ring, tx_ring was checked for null instead.
Signed-off-by: NJirka Pirko <jirka@pirko.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of using call by reference use the PTR_ERR macros to handle
return value with error case. Compile tested only.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is still a call to sock_prot_inuse_add() in af_netlink
while in a preemptable section. Add explicit BH disable around
this call.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rule of calling sock_prot_inuse_add() is that BHs must
be disabled.  Some new calls were added where this was not
true and this tiggers warnings as reported by Ilpo.

Fix this by adding explicit BH disabling around those call sites,
or moving sock_prot_inuse_add() call inside an existing BH disabled
section.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Linus mentioned we could try to perform long word operations, even
on potentially unaligned addresses, on x86 at least. David mentioned
the HAVE_EFFICIENT_UNALIGNED_ACCESS test to handle this on all
arches that have efficient unailgned accesses.

I tried this idea and got nice assembly on 32 bits:

158:   33 82 38 01 00 00       xor    0x138(%edx),%eax
15e:   33 8a 34 01 00 00       xor    0x134(%edx),%ecx
164:   c1 e0 10                shl    $0x10,%eax
167:   09 c1                   or     %eax,%ecx
169:   74 0b                   je     176 <eth_type_trans+0x87>

And very nice assembly on 64 bits of course (one xor, one shl)

Nice oprofile improvement in eth_type_trans(), 0.17 % instead of 0.41 %,
expected since we remove 8 instructions on a fast path.

This patch implements a compare_ether_addr_64bits() function, that
uses the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS ifdef to efficiently
perform the 6 bytes comparison on all capable arches.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 4e4fd4e4 ("ne2k: convert to
net_device_ops") exported some ei_* symbols from the 8390 library,
but the axnet_cs driver defines local static versions of the same
functions.

Rename them to avoid the namespace conflict.

Reported by Stephen Rothwell.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rule of calling sock_prot_inuse_add() is that BHs must
be disabled.  Some new calls were added where this was not
true and this tiggers warnings as reported by Ilpo.

Fix this by adding explicit BH disabling around those call sites.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev_net_set() should be the very first thing after alloc_netdev().

"ndo_" changes turned simple assignment (which is OK to do before netns
assignment) into quite non-trivial operation (which is not OK, init_net was
used). This leads to incomplete initialisation of tunnel device in netns.

BUG: unable to handle kernel NULL pointer dereference at 00000004
IP: [<c02efdb5>] ip6_tnl_exit_net+0x37/0x4f
*pde = 00000000 
Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
last sysfs file: /sys/class/net/lo/operstate

Pid: 10, comm: netns Not tainted (2.6.28-rc6 #1) 
EIP: 0060:[<c02efdb5>] EFLAGS: 00010246 CPU: 0
EIP is at ip6_tnl_exit_net+0x37/0x4f
EAX: 00000000 EBX: 00000020 ECX: 00000000 EDX: 00000003
ESI: c5caef30 EDI: c782bbe8 EBP: c7909f50 ESP: c7909f48
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process netns (pid: 10, ti=c7908000 task=c7905780 task.ti=c7908000)
Stack:
 c03e75e0 c7390bc8 c7909f60 c0245448 c7390bd8 c7390bf0 c7909fa8 c012577a
 00000000 00000002 00000000 c0125736 c782bbe8 c7909f90 c0308fe3 c782bc04
 c7390bd4 c0245406 c084b718 c04f0770 c03ad785 c782bbe8 c782bc04 c782bc0c
Call Trace:
 [<c0245448>] ? cleanup_net+0x42/0x82
 [<c012577a>] ? run_workqueue+0xd6/0x1ae
 [<c0125736>] ? run_workqueue+0x92/0x1ae
 [<c0308fe3>] ? schedule+0x275/0x285
 [<c0245406>] ? cleanup_net+0x0/0x82
 [<c0125ae1>] ? worker_thread+0x81/0x8d
 [<c0128344>] ? autoremove_wake_function+0x0/0x33
 [<c0125a60>] ? worker_thread+0x0/0x8d
 [<c012815c>] ? kthread+0x39/0x5e
 [<c0128123>] ? kthread+0x0/0x5e
 [<c0103b9f>] ? kernel_thread_helper+0x7/0x10
Code: db e8 05 ff ff ff 89 c6 e8 dc 04 f6 ff eb 08 8b 40 04 e8 38 89 f5 ff 8b 44 9e 04 85 c0 75 f0 43 83 fb 20 75 f2 8b 86 84 00 00 00 <8b> 40 04 e8 1c 89 f5 ff e8 98 04 f6 ff 89 f0 e8 f8 63 e6 ff 5b 
EIP: [<c02efdb5>] ip6_tnl_exit_net+0x37/0x4f SS:ESP 0068:c7909f48
---[ end trace 6c2f2328fccd3e0c ]---
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is the last step to be able to perform full RCU lookups
in __inet_lookup() : After established/timewait tables, we
add RCU lookups to listening hash table.

The only trick here is that a socket of a given type (TCP ipv4,
TCP ipv6, ...) can now flight between two different tables
(established and listening) during a RCU grace period, so we
must use different 'nulls' end-of-chain values for two tables.

We define a large value :

#define LISTENING_NULLS_BASE (1U << 29)

So that slots in listening table are guaranteed to have different
end-of-chain values than slots in established table. A reader can
still detect it finished its lookup in the right chain.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch extends existing code:
 * Confirm options divide into the confirmed value plus an optional preference
   list for SP values. Previously only the preference list was echoed for SP
   values, now the confirmed value is added as per RFC 4340, 6.1;
 * length and sanity checks are added to avoid illegal memory (or NULL) access.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support for Mandatory options is provided by this patch, which will
be used by subsequent feature-negotiation patches.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This extends the scope of two available functions,
encode|decode_value_var, to work up to 6 (8) bytes, to match maximum
requirements in the RFC.

These functions are going to be used both by general option processing
and feature negotiation code, hence declarations have been put into
feat.h.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This provides function to query the current TX/RX CCID dynamically,
without reliance on the minisock value, using dynamic information
available in the currently loaded CCID module.

This query function is then used to
 (a) provide the getsockopt part for getting/setting CCIDs via sockopts;
 (b) replace the current test for "which CCID is in use" in probe.c.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With this patch, TX/RX CCIDs can now be changed on a per-connection
basis, which overrides the defaults set by the global sysctl variables
for TX/RX CCIDs.

To make full use of this facility, the remaining patches of this patch
set are needed, which track dependencies and activate negotiated
feature values.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update myri10ge firmware headers.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update DCA sections closing comments.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to have relevant information for NETLINK protocol, in
/proc/net/protocols, we should use sock_prot_inuse_add() to
update a (percpu and pernamespace) counter of inuse sockets.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) Use eq_net() in inet_netns_ok() to speedup socket creation if
   !CONFIG_NET_NS

2) Reorder the tests about inet_ehash_secret generation (once only)
   Use the unlikely() macro when testing if inet_ehash_secret already
   generated.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the igb driver is experiencing a panic due to a null function
pointer being used during the cleanup of the ethtool looback test on
fiber/serdes parts.  This patch prevents that and adds a check prior to
calling any phy function.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clarrify reading PBA has no side-effect (clearing).
Add missing GPL license text.
Signed-off-by: NScott Feldman <scofeldm@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NScott Feldman <scofeldm@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NScott Feldman <scofeldm@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add driver/firmware compatibility check.
Update firmware notify cmd to honor notify area size.
Add new version of init cmd.
Add link_down_cnt to notify area to track link down count.
Signed-off-by: NScott Feldman <scofeldm@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable ethtool support for get/set_flags so LRO can be turned on/off
by fwding drivers such as the bridge driver.  LRO is not compatible
with fwding drivers.
Signed-off-by: NScott Feldman <scofeldm@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pc300too driver works around a bug in PCI9050 bridge.  Unfortunately
it was doing that too late.
Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>