- 11 4月, 2007 24 次提交
-
-
由 Brice Goglin 提交于
Update the myri10ge driver version number to 1.3.0-1.233. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Add the Intel 5000 southbridge (aka Intel 6310/6311/6321ESB) PCIe ports and the Intel E30x0 chipsets to the whitelist of aligned PCIe completion. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Simpler way of dealing with the firmware 4KB boundary crossing restriction for rx buffers. This fixes a variety of memory corruption issues when using an "uncommon" MTU with a 16KB page size. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Divy Le Ray 提交于
Remove specific CPL handler. Add missing CPL handler. Add missing register setting when the interface is brought up. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Divy Le Ray 提交于
The MAC watchdog was failing if the peer interface was brought down. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Divy Le Ray 提交于
Fix a deadlock when the interface s configured down and the watchdog tack is sleeping on rtnl_lock. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Need to rework wake on lan code to setup properly and get activated on shutdown (and suspend), not when ethtool is run. This does not need to go to stable queue because wake on lan was not even included in 2.6.20 (or earlier versions). Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
The workaround Yukon EC-U wasn't comparing with correct version and wasn't doing correct setup. Without it, 88e8056 throws all sorts of errors. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Some of these chips are disabled until clock is enabled. This fixes: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=404107Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Driver needs to turn off carrier when down. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Driver needs to turn off carrier when down, otherwise it can confuse bonding and bridging and looks like carrier is on immediately when it is brought back up. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 David Howells 提交于
Update the FRV arch MAINTAINER record to get a hit on "grep -i frv". Whilst FR-V is technically correct, it's normally thought of as FRV. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cliff Brake 提交于
The UCB1400 is missing a name parameter in the device_driver struct. This causes missing information in the /sys tree and seems to cause other problems with the AC97 functionality. This was tested on a PXA270 system. Signed-off-by: NCliff Brake <cbrake@bec-systems.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'for-2.6.21' of master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] intel_agp: fix G965 GTT size detect
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: change deprecation status of dv1394
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB/cm: Fix DMA direction typo IB/iser: Don't defer connection failure notification to workqueue
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Do not discard truncated input reports
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: add "optical" to sysfs "media" attribute ide: ugly messages trying to open CD drive with no media present ide: correctly prevent IDE timer expiry function to run if request was already handled
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: ipt_CLUSTERIP: fix oops in checkentry function [TCP]: slow_start_after_idle should influence cwnd validation too [SC92031]: Fix priv->lock context [NET_SCHED]: cls_tcindex: fix compatibility breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] SGI Altix : fix pcibr_dmamap_ate32() bug [IA64] Fix CPU freq displayed in /proc/cpuinfo [IA64] Fix wrong assumption about irq and vector in msi_ia64.c [IA64] BTE error timer fix
-
由 Danny Kukawka 提交于
Add "optical" to sysfs "media" attribute as already in /proc Signed-off-by: NDanny Kukawka <dkukawka@suse.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Stuart Hayes 提交于
I get the following error messages when trying to open a CD device (specifically, the Teac CD-ROM CD-224E) that has no media present: hda: packet command error: status=3D0x51 { DriveReady SeekComplete Error } hda: packet command error: error=3D0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown This happens when a "start stop unit" command (0x1b 0 0 0 3 0 0 0 0 0) is sent to the drive to try to close the CD-ROM tray, but this drive doesn't have that capability (it's a slim portable-type CD-ROM), so it reports sense key 5 (illegal request) with asc/ascq 24/0. This is exactly how SFF8090i says it should respond. But ide-cd.c (in cdrom_decode_status() ) just sees sense key 5 and spews out an error. It then goes on to request sense data, and cdrom_log_sense() understands this error and doesn't log it. The patch, for kernel 2.6.20.4, suppresses this error message. Signed-off-by: NStuart Hayes <stuart_hayes@dell.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Suleiman Souhlal 提交于
It is possible for the timer expiry function to run even though the request has already been handled: ide_timer_expiry() only checks that the handler is not NULL, but it is possible that we have handled a request (thus clearing the handler) and then started a new request (thus starting the timer again, and setting a handler). A simple way to exhibit this is to set the DMA timeout to 1 jiffy and run dd: The kernel will panic after a few minutes because ide_timer_expiry() tries to add a timer when it's already active. To fix this, we simply add a request generation count that gets incremented at every interrupt, and check in ide_timer_expiry() that we have not already handled a new interrupt before running the expiry function. Signed-off-by: NSuleiman Souhlal <suleiman@google.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jaroslav Kysela 提交于
The clusterip_config_find_get() already increases entries reference counter, so there is no reason to do it twice in checkentry() callback. This causes the config to be freed before it is removed from the list, resulting in a crash when adding the next rule. Signed-off-by: NJaroslav Kysela <perex@suse.cz> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 4月, 2007 7 次提交
-
-
由 Michael S. Tsirkin 提交于
Receive buffers need to be mapped with DMA_FROM_DEVICE. Incorrectly mapping with DMA_TO_DEVICE causes a hard lock on ppc64 machines with an IOMMU. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=431> Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Wang Zhenyu 提交于
On G965, I810_PGETBL_CTL is a mmio offset, but we wrongly take it as pci config space offset in detecting GTT size. This one line patch fixs this. Signed-off-by: NWang Zhenyu <zhenyu.z.wang@intel.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 David S. Miller 提交于
For the cases that slow_start_after_idle are meant to deal with, it is almost a certainty that the congestion window tests will think the connection is application limited and we'll thus decrease the cwnd there too. This defeats the whole point of setting slow_start_after_idle to zero. So test it there too. We do not cancel out the entire tcp_cwnd_validate() function so that if the sysctl is changed we still have the validation state maintained. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The spin_lock calls made in dev->open and dev->close must disable BH since open/close are made in process context. Conversely, the call in dev->hard_start_xmit does not need to disable BH since it is already executing with BH disabled. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Userspace uses an integer for TCA_TCINDEX_SHIFT, the kernel was changed to expect and use a u16 value in 2.6.11, which broke compatibility on big endian machines. Change back to use int. Reported by Ole Reinartz <ole.reinartz@gmx.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* 'for-2.6.21' of master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] intel_agp: PCI id update for Intel 965GM
-
由 Stefan Richter 提交于
Nobody ported ffmpeg from dv1394 to rawiso yet, and there is no justification to remove dv1394 right now. Nevertheless, a strong deprecation of this ABI makes a lot of sense, especially as Kristian H's drivers shape up to be an attractive alternative to the existing ones. But we don't have a schedule at the moment. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
- 09 4月, 2007 6 次提交
-
-
由 Andrew Morton 提交于
WARNING: arch/i386/kernel/built-in.o - Section mismatch: reference to .init.text:irqbalance_disable from .text between 'quirk_intel_irqbalance' (at offset 0x80a5) and 'i8237A_suspend' Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:nvidia_bugs from .data between 'early_qrk' (at offset 0x8428) and 'enable_cpu_hotplug' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:via_bugs from .data between 'early_qrk' (at offset 0x8438) and 'enable_cpu_hotplug' WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text:ati_bugs from .data between 'early_qrk' (at offset 0x8448) and 'enable_cpu_hotplug' The compiler is putting it into .data because the __initdata is in the wrong place. Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Convert omap_cf into a platform_driver ... this resolves oopsing during suspend/resume. Evidently folk haven't tried suspend/resume on an OSK (the main platform for this driver) since September or so, which is when platform_device learned about suspend_late()/resume_early() and stopped being able to suspend/resume without a platform_driver. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zachary Amsden 提交于
Since lazy MMU batching mode still allows interrupts to enter, it is possible for interrupt handlers to try to use kmap_atomic, which fails when lazy mode is active, since the PTE update to highmem will be delayed. The best workaround is to issue an explicit flush in kmap_atomic_functions case; this is the only way nested PTE updates can happen in the interrupt handler. Thanks to Jeremy Fitzhardinge for noting the bug and suggestions on a fix. This patch gets reverted again when we start 2.6.22 and the bug gets fixed differently. Signed-off-by: NZachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Timo Savola 提交于
If rootmode isn't valid, we hit the BUG() in fuse_init_inode. Now EINVAL is returned. Signed-off-by: NTimo Savola <tsavola@movial.fi> Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wang Zhenyu 提交于
Update PCI id info for Intel 965GM chipset. Signed-off-by: NWang Zhenyu <zhenyu.z.wang@intel.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 08 4月, 2007 3 次提交
-
-
由 Linus Torvalds 提交于
Getting rid of the p->children printout in show_task() left behind an unused variable. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
the p->parent PID printout gives us all the information about the task tree that we need - the eldest_child()/older_sibling()/ younger_sibling() printouts are mostly historic and i do not remember ever having used those fields. (IMO in fact they confuse the SysRq-T output.) So remove them. This code has sentimental value though, those fields and printouts are one of the oldest ones still surviving from Linux v0.95's kernel/sched.c: if (p->p_ysptr || p->p_osptr) printk(" Younger sib=%d, older sib=%d\n\r", p->p_ysptr ? p->p_ysptr->pid : -1, p->p_osptr ? p->p_osptr->pid : -1); else printk("\n\r"); written 15 years ago, in early 1992. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus 'snif' Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
devres should be deallocated with devres_free() not kfree(). This bug corrupts slab on IRQ request failure. Fix it. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-