- 19 5月, 2011 13 次提交
-
-
由 Jan Glauber 提交于
While debugging I stumbled over two problems in the code that protects module pages. First issue is that disabling the protection before freeing init or unload of a module is not symmetric with the enablement. For instance, if pages are set to RO the page range from module_core to module_core + core_ro_size is protected. If a module is unloaded the page range from module_core to module_core + core_size is set back to RW. So pages that were not set to RO are also changed to RW. This is not critical but IMHO it should be symmetric. Second issue is that while set_memory_rw & set_memory_ro are used for RO/RW changes only set_memory_nx is involved for NX/X. One would await that the inverse function is called when the NX protection should be removed, which is not the case here, unless I'm missing something. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jan Glauber 提交于
Reset mod->init_ro_size to zero after the init part of a module is unloaded. Otherwise we need to check if module->init is NULL in the unprotect functions in the next patch. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Daniel J Blueman 提交于
Fix function prototype to be ANSI-C compliant, consistent with other function prototypes, addressing a sparse warning. Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Richard Kennedy 提交于
Reorder structure kparam_array to remove 8 bytes of alignment padding on 64 bit builds, dropping its size from 40 to 32 bytes. Also update the macro module_param_array_named to initialise the structure using its member names to allow it to be changed without touching all its call sites. 'git grep' finds module_param_array in 1037 places so this patch will save a small amount of data space across many modules. Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Richard Kennedy 提交于
Reorder struct module to remove 24 bytes of alignment padding on 64 bit builds when the CONFIG_TRACE options are selected. This allows the structure to fit into one fewer cache lines, and its size drops from 592 to 568 on x86_64. Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Dmitry Torokhov 提交于
Doing so prevents the following warning from sparse: CHECK kernel/params.c kernel/params.c:817:9: warning: symbol '__modver_version_show' was not declared. Should it be static? since kernel/params.c is never compiled with MODULE being set. Signed-off-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Dmitry Torokhov 提交于
On m68k natural alignment is 2-byte boundary but we are trying to align structures in __modver section on sizeof(void *) boundary. This causes trouble when we try to access elements in this section in array-like fashion when create "version" attributes for built-in modules. Moreover, as DaveM said, we can't reliably put structures into independent objects, put them into a special section, and then expect array access over them (via the section boundaries) after linking the objects together to just "work" due to variable alignment choices in different situations. The only solution that seems to work reliably is to make an array of plain pointers to the objects in question and put those pointers in the special section. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: configfs: Fix race between configfs_readdir() and configfs_d_iput() configfs: Don't try to d_delete() negative dentries. ocfs2/dlm: Target node death during resource migration leads to thread spin ocfs2: Skip mount recovery for hard-ro mounts ocfs2/cluster: Heartbeat mismatch message improved ocfs2/cluster: Increase the live threshold for global heartbeat ocfs2/dlm: Use negotiated o2dlm protocol version ocfs2: skip existing hole when removing the last extent_rec in punching-hole codes. ocfs2: Initialize data_ac (might be used uninitialized)
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: drivercore: revert addition of of_match to struct device of: fix race when matching drivers
-
git://git.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Kludge IP27 build for 2.6.39. MIPS: AR7: Fix GPIO register size for Titan variant. MIPS: Fix duplicate invocation of notify_die. MIPS: RB532: Fix iomap resource size miscalculation.
-
由 Grant Likely 提交于
Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Milton Miller 提交于
If two drivers are probing devices at the same time, both will write their match table result to the dev->of_match cache at the same time. Only write the result if the device matches. In a thread titled "SBus devices sometimes detected, sometimes not", Meelis reported his SBus hme was not detected about 50% of the time. From the debug suggested by Grant it was obvious another driver matched some devices between the call to match the hme and the hme discovery failling. Reported-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NMilton Miller <miltonm@bga.com> [grant.likely: modified to only call of_match_device() once] Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 18 5月, 2011 19 次提交
-
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: don't delay blk_run_queue_async scsi: remove performance regression due to async queue run blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup block: rescan partitions on invalidated devices on -ENOMEDIA too cdrom: always check_disk_change() on open block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
The 'size' variable contains the correct register size for both AR7 and Titan, but we never used it to ioremap the correct register size. This problem only shows up on Titan. [ralf@linux-mips.org: Fixed the fix. The original patch as in patchwork recognizes the problem correctly then fails to fix it ...] Reported-by: NAlexander Clouter <alex@digriz.org.uk> Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/2380/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Initial patch by Yury Polyanskiy <ypolyans@princeton.edu>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2373/
-
由 Ralf Baechle 提交于
This is the MIPS portion of Joe Perches <joe@perches.com>'s https://patchwork.linux-mips.org/patch/2172/ which seems to have been lost in time and space. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Joel Becker 提交于
configfs_readdir() will use the existing inode numbers of inodes in the dcache, but it makes them up for attribute files that aren't currently instantiated. There is a race where a closing attribute file can be tearing down at the same time as configfs_readdir() is trying to get its inode number. We want to get the inode number of open attribute files, because they should match while instantiated. We can't lock down the transition where dentry->d_inode is set to NULL, so we just check for NULL there. We can, however, ensure that an inode we find isn't iput() in configfs_d_iput() until after we've accessed it. Signed-off-by: NJoel Becker <jlbec@evilplan.org>
-
由 Joel Becker 提交于
When configfs is faking mkdir() on its subsystem or default group objects, it starts by adding a negative dentry. It then tries to instantiate the group. If that should fail, it must clean up after itself. I was using d_delete() here, but configfs_attach_group() promises to return an empty dentry on error. d_delete() explodes with the entry dentry. Let's try d_drop() instead. The unhashing is what we want for our dentry. Signed-off-by: NJoel Becker <jlbec@evilplan.org>
-
由 Shaohua Li 提交于
Let's check a scenario: 1. blk_delay_queue(q, SCSI_QUEUE_DELAY); 2. blk_run_queue_async(); the second one will became a noop, because q->delay_work already has WORK_STRUCT_PENDING_BIT set, so the delayed work will still run after SCSI_QUEUE_DELAY. But blk_run_queue_async actually hopes the delayed work runs immediately. Fix this by doing a cancel on potentially pending delayed work before queuing an immediate run of the workqueue. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] V4L: soc-camera: regression fix: calculate .sizeimage in soc_camera.c [media] v4l2-subdev: fix broken subdev control enumeration [media] Fix cx88 remote control input [media] v4l: Release module if subdev registration fails
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, AMD: Fix ARAT feature setting again Revert "x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors" x86, apic: Fix spurious error interrupts triggering on all non-boot APs x86, mce, AMD: Fix leaving freed data in a list x86: Fix UV BAU for non-consecutive nasids x86, UV: Fix NMI handler for UV platforms
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf evlist: Fix per thread mmap setup perf tools: Honour the cpu list parameter when also monitoring a thread list kprobes, x86: Disable irqs during optimized callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix cifsConvertToUCS() for the mapchars case cifs: add fallback in is_path_accessible for old servers
-
由 Randy Dunlap 提交于
Provide a stub for proc_mkdir_mode() when CONFIG_PROC_FS is not enabled, just like the stub for proc_mkdir(). Fixes this linux-next build error: drivers/net/wireless/airo.c:4504: error: implicit declaration of function 'proc_mkdir_mode' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Weinberger 提交于
os_dump_core() uses abort() to terminate UML in case of an fatal error. glibc's abort() calls raise(SIGABRT) which makes use of tgkill(). tgkill() has no effect within UML's kernel threads because they are not pthreads. As fallback abort() executes an invalid instruction to terminate the process. Therefore UML gets killed by SIGSEGV and leaves a ugly log entry in the host's kernel ring buffer. To get rid of this we use our own abort routine. Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
ZONE_CONGESTED should be a state of global memory reclaim. If not, a busy memcg sets this and give unnecessary throttoling in wait_iff_congested() against memory recalim in other contexts. This makes system performance bad. I'll think about "memcg is congested!" flag is required or not, later. But this fix is required first. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: NMinchan Kim <minchan.kim@gmail.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: NYing Han <yinghan@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Axel Lin 提交于
Adding the necessary MODULE_DEVICE_TABLE() information allows the driver to be automatically loaded by udev. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Fix switch initialization to ensure that all switches have default routing disabled. This guarantees that no unexpected RapidIO packets arrive to the default port set by reset and there is no default routing destination until it is properly configured by software. This update also unifies handling of unmapped destinations by tsi57x, IDT Gen1 and IDT Gen2 switches. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: <stable@kernel.org> [2.6.37+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Layton 提交于
As Metze pointed out, commit 84cdf74e broke mapchars option: Commit "cifs: fix unaligned accesses in cifsConvertToUCS" (84cdf74e) does multiple steps in just one commit (moving the function and changing it without testing). put_unaligned_le16(temp, &target[j]); is never called for any codepoint the goes via the 'default' switch statement. As a result we put just zero (or maybe uninitialized) bytes into the target buffer. His proposed patch looks correct, but doesn't apply to the current head of the tree. This patch should also fix it. Cc: <stable@kernel.org> # .38.x: 581ade4d: cifs: clean up various nits in unicode routines (try #2) Reported-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
The is_path_accessible check uses a QPathInfo call, which isn't supported by ancient win9x era servers. Fall back to an older SMBQueryInfo call if it fails with the magic error codes. Cc: stable@kernel.org Reported-and-Tested-by: NSandro Bonazzola <sandro.bonazzola@gmail.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 17 5月, 2011 8 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tick: Clear broadcast active bit when switching to oneshot rtc: mc13xxx: Don't call rtc_device_register while holding lock rtc: rp5c01: Initialize drvdata before registering device rtc: pcap: Initialize drvdata before registering device rtc: msm6242: Initialize drvdata before registering device rtc: max8998: Initialize drvdata before registering device rtc: max8925: Initialize drvdata before registering device rtc: m41t80: Initialize clientdata before registering device rtc: ds1286: Initialize drvdata before registering device rtc: ep93xx: Initialize drvdata before registering device rtc: davinci: Initialize drvdata before registering device rtc: mxc: Initialize drvdata before registering device clocksource: Install completely before selecting
-
由 Borislav Petkov 提交于
Trying to enable the local APIC timer on early K8 revisions uncovers a number of other issues with it, in conjunction with the C1E enter path on AMD. Fixing those causes much more churn and troubles than the benefit of using that timer brings so don't enable it on K8 at all, falling back to the original functionality the kernel had wrt to that. Reported-and-bisected-by: NNick Bowler <nbowler@elliptictech.com> Cc: Boris Ostrovsky <Boris.Ostrovsky@amd.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Nick Bowler <nbowler@elliptictech.com> Cc: Joerg-Volker-Peetz <jvpeetz@web.de> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/1305636919-31165-3-git-send-email-bp@amd64.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Borislav Petkov 提交于
This reverts commit e20a2d20, as it crashes certain boxes with specific AMD CPU models. Moving the lower endpoint of the Erratum 400 check to accomodate earlier K8 revisions (A-E) opens a can of worms which is simply not worth to fix properly by tweaking the errata checking framework: * missing IntPenging MSR on revisions < CG cause #GP: http://marc.info/?l=linux-kernel&m=130541471818831 * makes earlier revisions use the LAPIC timer instead of the C1E idle routine which switches to HPET, thus not waking up in deeper C-states: http://lkml.org/lkml/2011/4/24/20 Therefore, leave the original boundary starting with K8-revF. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jens Axboe 提交于
Commit c21e6beb removed our queue request_fn re-enter protection, and defaulted to always running the queues from kblockd to be safe. This was a known potential slow down, but should be safe. Unfortunately this is causing big performance regressions for some, so we need to improve this logic. Looking into the details of the re-enter, the real issue is on requeue of requests. Requeue of requests upon seeing a BUSY condition from the device ends up re-running the queue, causing traces like this: scsi_request_fn() scsi_dispatch_cmd() scsi_queue_insert() __scsi_queue_insert() scsi_run_queue() scsi_request_fn() ... potentially causing the issue we want to avoid. So special case the requeue re-run of the queue, but improve it to offload the entire run of local queue and starved queue from a single workqueue callback. This is a lot better than potentially kicking off a workqueue run for each device seen. This also fixes the issue of the local device going into recursion, since the above mentioned commit never moved that queue run out of line. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Change netdev_fix_features messages loglevel vmxnet3: Fix inconsistent LRO state after initialization sfc: Fix oops in register dump after mapping change IPVS: fix netns if reading ip_vs_* procfs entries bridge: fix forwarding of IPv6
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: Revert "mmc: fix a race between card-detect rescan and clock-gate work instances"
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning in mm/page_alloc.c: Warning(mm/page_alloc.c:2370): No description found for parameter 'nid' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
During pci remove/rescan testing found: pci 0000:c0:03.0: PCI bridge to [bus c4-c9] pci 0000:c0:03.0: bridge window [io 0x1000-0x0fff] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref] pci 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff]) pci 0000:c0:03.0: Error enabling bridge (-22), continuing pci 0000:c0:03.0: enabling bus mastering pci 0000:c0:03.0: setting latency timer to 64 pcieport 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff]) pcieport: probe of 0000:c0:03.0 failed with error -22 This bug was caused by commit c8adf9a3 ("PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.") After that commit, pci_hotplug_io_size is changed to additional_io_size from minium size. So it will not go through resource_size(res) != 0 path, and will not be reset. The root cause is: pci_bridge_check_ranges will set RESOURCE_IO flag for pci bridge, and later if children do not need IO resource. those bridge resources will not need to be allocated. but flags is still there. that will confuse the the pci_enable_bridges later. related code: static void assign_requested_resources_sorted(struct resource_list *head, struct resource_list_x *fail_head) { struct resource *res; struct resource_list *list; int idx; for (list = head->next; list; list = list->next) { res = list->res; idx = res - &list->dev->resource[0]; if (resource_size(res) && pci_assign_resource(list->dev, idx)) { ... reset_resource(res); } } } At last, We have to clear the flags in pbus_size_mem/io when requested size == 0 and !add_head. becasue this case it will not go through adjust_resources_sorted(). Just make size1 = size0 when !add_head. it will make flags get cleared. At the same time when requested size == 0, add_size != 0, will still have in head and add_list. because we do not clear the flags for it. After this, we will get right result: pci 0000:c0:03.0: PCI bridge to [bus c4-c9] pci 0000:c0:03.0: bridge window [io disabled] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref] pci 0000:c0:03.0: enabling bus mastering pci 0000:c0:03.0: setting latency timer to 64 pcieport 0000:c0:03.0: setting latency timer to 64 pcieport 0000:c0:03.0: irq 160 for MSI/MSI-X pcieport 0000:c0:03.0: Signaling PME through PCIe PME interrupt pci 0000:c4:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:c0:03.0:pcie01: service driver pcie_pme loaded aer 0000:c0:03.0:pcie02: service driver aer loaded pciehp 0000:c0:03.0:pcie04: Hotplug Controller: v3: more simple fix. also fix one typo in pbus_size_mem Signed-off-by: NYinghai Lu <yinghai@kernel.org> Reviewed-by: NRam Pai <linuxram@us.ibm.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-