- 27 2月, 2009 23 次提交
-
-
由 Greg Ungerer 提交于
Remove the ColdFire CPU specific setup from here. The ColdFire CPU platform code now sets up all this. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Ungerer 提交于
m68knommu: add FEC platform support to ColdFire CPU's setup code Move the per-CPU FEC driver setup code into the actual platform setup code for each ColdFire CPU varient. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Sesterhenn 提交于
Trivial cleanup, list_del(); list_add_tail() is equivalent to list_move_tail(). Semantic patch for coccinelle can be found at www.cccmz.de/~snakebyte/list_move_tail.spatch Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Acked-by: NKarsten Keil <kkeil@novell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Get rid of some noise that is for debug only. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
This organizes a few calls into a function table to enable adding new devices. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
This is not a logical change but rather a move of the inbound firmware event handler into it's own function as it will later be called by the outbound path. The addition of the mutex is to create exclusive access to the mailbox commands between inbound and outbound handling. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Add function for performing the reset rather than in-line. This function may later be called by a core dump process. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2009 17 次提交
-
-
由 David S. Miller 提交于
Conflicts: drivers/net/wireless/orinoco/orinoco.c
-
由 Greg Kroah-Hartman 提交于
This patch adds two new device ids to the asix driver. One comes directly from the asix driver on their web site, the other was reported by Armani Liao as needed for the MSI X320 to get the driver to work properly for it. Reported-by: NArmani Liao <aliao@novell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Currently there are two paths for filling rx buffer queues. One is used during initialization and the other during runtime. This patch removes ql_alloc_sbq_buffers() and ql_alloc_lbq_buffers() and replaces them with a call to the runtime functions ql_update_lbq() and ql_update_sbq(). Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
RX Buffers are refilled in chunks of 16 at a time before notifying the hardware with a register write. This can cause several writes to take place in a given napi poll call. This change causes the write to take place only once at the end of the call. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Instead of taking/giving the hw semaphore repeatedly when iterating over several frame to queue route settings, we have the caller hold it until all are done. This reduces PCI bus chatter and possible waits. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Instead of taking/giving the semaphore repeatedly when iterating over several adderesses, we have the caller hold it until all are done. This reduces PCI bus chatter and possible waits. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Setting MAC addresses and routing frames to various queues will need to be done in response to firmware events as well as during initialization. This change encapsulates the facilities into a single call that can later me made from other places. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
The functions time_before is more robust for comparing jiffies against other values. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
The functions time_before is more robust for comparing jiffies against other values. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
The functions time_before is more robust for comparing jiffies against other values. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Remove some pointless conditionals before kfree_skb(). The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; @@ - if (E) - kfree_skb(E); + kfree_skb(E); // </smpl> Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
This patch changes the return value of nlmsg_notify() as follows: If NETLINK_BROADCAST_ERROR is set by any of the listeners and an error in the delivery happened, return the broadcast error; else if there are no listeners apart from the socket that requested a change with the echo flag, return the result of the unicast notification. Thus, with this patch, the unicast notification is handled in the same way of a broadcast listener that has set the NETLINK_BROADCAST_ERROR socket flag. This patch is useful in case that the caller of nlmsg_notify() wants to know the result of the delivery of a netlink notification (including the broadcast delivery) and take any action in case that the delivery failed. For example, ctnetlink can drop packets if the event delivery failed to provide reliable logging and state-synchronization at the cost of dropping packets. This patch also modifies the rtnetlink code to ignore the return value of rtnl_notify() in all callers. The function rtnl_notify() (before this patch) returned the error of the unicast notification which makes rtnl_set_sk_err() reports errors to all listeners. This is not of any help since the origin of the change (the socket that requested the echoing) notices the ENOBUFS error if the notification fails and should resync itself. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
A receive coalescing timeout of 250 usec appears to strike a good balance between allowing enough received frames to be aggregated for LRO to do its job and not allowing the connection to stall due to delaying ACKs to the remote end for too long. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
Move the netif_carrier_off() call in ->open() to port probe, so that ethtool doesn't report the link as being up before we have up'd the interface. Move initialisation of the rx/tx coalescing timers from ->open() to port probe, so that we don't reset the coalescing timers every time the interface is up'd. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-