Thist patch removes the depends on USB_EHCI_HCD that the various USB
EHCI HCD drivers use and encloses every driver within an if USB_EHCI_HCD
/ endif block. The EHCI HCD platform and Octeon drivers have been moved
around to remain enclosed within this block.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Just like the OHCI counter part we just can remove the architecture
specific symbols which prevent these configuration symbols from being
selected by platforms/architectures requiring it. The original
implementation did not scale at all since it required each and every
single architecture to be added for these configuration symbols to be
selected. Now it is up to the EHCI driver and/or platform to select
these configuration symbols accordingly.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the depends on USB from all config symbols in
drivers/usb/host/Kconfig and replace that with an if USB / endif block
as suggested by Alan Stern. Some source ... Kconfig lines have been
shuffled around to permit a better regroupment of the Kconfig files
depending on "config USB" item. No functionnal change is introduced.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding support for a Mediatek based device labelled as
D-Link Model: DWM-156, H/W Ver: A7

Also adding two other device IDs found in the Debian(!)
packages included on the embedded device driver CD.

This is a composite MBIM + serial ports + card reader device:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2001 ProdID=7d01 Rev= 3.00
S:  Manufacturer=D-Link,Inc
S:  Product=D-Link DWM-156
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=500us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

7edb3daf: (USB: EHCI: make ehci-s5p a separate driver)
raised an issue with ehci-s5p's driver data.
Now that 's5p_ehci_hcd' doesn't maintain pointer to 'usb_hcd'
and s5p_ehci is nothing but a pointer to hcd->priv;
add hcd to the driver data rather than s5p_ehci.

This fixes issues with null pointer dereferencing in
s5p_ehci_shutdown(), s5p_ehci_suspend(), s5p_ehci_resume().
Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com>
CC: Manjunath Goudar <manjunath.goudar@linaro.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Jingoo Han <jg1.han@samsung.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'for-usb-next-2012-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next

Sarah writes:

	xHCI misc cleanup patches for 3.10

	Hi Greg,

	Here's three cleanup patches for 3.10.  Nothing big here, just some debugging
	output changes, a macro rename, and a math macro change that should have no
	behavioral effects.

	Tested on the Intel Panther Point xHCI host, with USB storage and mouse, with
	xHCI debugging turned on.  I don't have the TI host that causes the debugging
	output changes to trigger.

	Sarah Sharp

Separate the  Qualcomm QSD/MSM on-chip host controller driver from
ehci-hcd host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before Qualcomm QSD/MSM
can be booted with a multi-platform kernel, which is not expected before
3.11.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the msm bus glue.

In V5 (arnd):
 - add FIXME about missing usb_add_hcd() or usb_remove_hcd() calls

In V3:
 - Detailed commit message added here describing why this patch is required.
 - Arranged  #include's in alphabetical order.
 - driver.name initialized hcd_name[] = "ehci-msm" in platform_driver
   structure initialization instead of "msm-ehci", which was the reason
   why it broke in EHCI USB testing

In V2:
Tegra patch related changes removed from this patch.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Separate the Atmel host controller driver from ehci-hcd host code
so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before Atmel can be
booted with a multi-platform kernel. This is currently planned for
Linux-3.11.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the Atmel bus glue.

In V4 (arnd):
 - reordered #include statements.
 - removed call to ehci_shutdown and the corresponding export

In V3:
 - Detailed commit message added here about why this patch is required.
 - Replaced hcd_name string "ehci-atmel" to "atmel-ehci".
 - Inserted blank line in the Makefile to separate the EHCI drivers from
   the following non-EHCI drivers.
 - Exported ehci_shutdown symbol as it is needed by the Atmel driver.
 - Eliminated ehci_atmel_setup routine because hcd registers
   can be directly set in the ehci_atmel_drv_probe function.

In V2:
  Resolved below compiler error.
  drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove':
  drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown'
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Separate the  Samsung S5P/EXYNOS host controller driver from ehci-hcd
host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before S5P/EXYNOS can
be booted with a multi-platform kernel. We currently expect those
to get merged for 3.10.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the s5p bus glue.

In V4 (arnd)
 - revert some of the pointless changes.
 - fix allocation of s5p specific data structure.

In V3:
 - Detailed commit message added here, why this patch is required.
 - MODULE_LICENSE is GPL v2.
 - Added .extra_priv_size to eliminate the separate allocation of
   the s5p_ehci_hcd structure and removed .reset function pointer
   initialization.
 - Arranged  #include's in alphabetical order.
 - After using extra_priv_size initialization, struct usb_hcd *hcd
   is redundant and can be removed from the probe function.
 - Eliminated s5p_ehci_phy_enable,contents of statements moved
   into the s5p_ehci_probe
 - Eliminated s5p_ehci_phy_disable, contents of statements moved into
   the s5p_ehci_remove.

In V2:
 - Tegra patch related changes removed from this patch.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Separate the SPEAr host controller driver from ehci-hcd host code
so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before SPEAr can be
booted with a multi-platform kernel, but they are queued in the
arm-soc tree for 3.10.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the SPEAr bus glue.

In V4 (arnd):
 - renamed all 'struct spear_ehci' pointers from 'ehci' to the
   less ambiguous 'sehci'.
 - folded trivial spear_start_ehci/spear_stop_ehci functions into
   callers.
 - brought back initialization of ehci->caps.

In V3:
 - Detailed commit message added here about why this patch is required.
 - Eliminated ehci_spear_setup routine because hcd registers can
   be directly set in the spear_ehci_hcd_drv_probe function.
 - spear_overrides struct initialized.
 - Converted to using .extra_priv_size for allocating spear_ehci,
   and updated all users of that structure.
 - to_spear_ehci() macro modified for spear_ehci.

In V2:
 - Replaced spear as SPEAr everywhere, leaving functions/variables/config options.
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NViresh Kumar <viresh.linux@gmail.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: spear-devel@list.st.com
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Separate the Orion host controller driver from ehci-hcd host
code into its own driver module because of following reason.

With the multiplatform changes in arm-soc tree, it becomes
possible to enable the mvebu platform (which uses
ehci-orion) at the same time as other platforms that require
a conflicting EHCI bus glue. At the moment, this results
in a warning like

drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition
drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable]

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the orion bus glue.

An earlier version of this patch was included in 3.9 but caused
a regression there, which has subsequently been fixed.

While we are here, use the opportunity to disabiguate the two
Marvell EHCI controller implementations in Kconfig.

In V4 (arnd):
- Improve Kconfig text

In V3:
- More detail provided in commit message regarding this patch.
- Replaced hcd_name string "ehci-orion" into "orion-ehci".
- MODULE_LICENSE is GPL v2.
- In ehci_init_driver calling second argument passed  as NULL instead of
  ehci_orion_overrides because ehci_orion_overrides is removed.

In V2:
- Tegra patch related changes removed from this patch.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch add a missing usb device id for the GDMBoost V1.x device

The patch is against 3.9-rc5
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the appropriate WARN() and WARN_ON() accessors to avoid a build error
when CONFIG_BUG=n:

	drivers/usb/gadget/configfs.c: In function 'config_usb_cfg_unlink':
	drivers/usb/gadget/configfs.c:442:2: error: implicit declaration of function '__WARN_printf'
	drivers/usb/gadget/configfs.c: In function 'configfs_do_nothing':
	drivers/usb/gadget/configfs.c:733:2: error: implicit declaration of function '__WARN'
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There are no functional changes in this patch. However, because the
compliance mode timer can be deleted in more than one function, it
seemed expedient to include the function name in the debug strings.

Also limited the use of capitals to the first word in the compliance
mode debug messages, except after a function name where all words
start with lower case, in keeping with the style prevalent elsewhere
in xhci.c.
Signed-off-by: NTony Camuso <tcamuso@redhat.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>

We want the fixes here as well.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull KVM fix from Gleb Natapov:
 "Bugfix for the regression introduced by commit c300aa64"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Allow cross page reads and writes from cached translations.

Pull x86 fixes from Peter Anvin:
 "Two quite small fixes: one a build problem, and the other fixes
  seccomp filters on x32."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix rebuild with EFI_STUB enabled
  x86: remove the x32 syscall bitmask from syscall_get_nr()

Interrupt handlers are always invoked with interrupts disabled, so
remove all uses of the deprecated IRQF_DISABLED flag.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Linux has expected that interrupt handlers are executed with local
interrupts disabled for a while now, so ensure that this is the case on
Alpha even for non-device interrupts such as IPIs.

Without this patch, secondary boot results in the following backtrace:

  warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0()
  trace:
    __local_bh_enable+0xb8/0xd0
    irq_enter+0x74/0xa0
    scheduler_ipi+0x50/0x100
    handle_ipi+0x84/0x260
    do_entint+0x1ac/0x2e0
    irq_exit+0x60/0xa0
    handle_irq+0x98/0x100
    do_entint+0x2c8/0x2e0
    ret_from_sys_call+0x0/0x10
    load_balance+0x3e4/0x870
    cpu_idle+0x24/0x80
    rcu_eqs_enter_common.isra.38+0x0/0x120
    cpu_idle+0x40/0x80
    rest_init+0xc0/0xe0
    _stext+0x1c/0x20

A similar dump occurs if you try to reboot using magic-sysrq.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Due to all of the goodness being packed into today's kernels, the
resulting image isn't as slim as it once was.

In light of this, don't pass -msmall-data to gcc, which otherwise results
in link failures due to impossible relocations when compiling anything but
the most trivial configurations.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Tested-by: NThorsten Kranzkowski <dl8bcu@dl8bcu.de>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes a NULL pointer dereference at boot on UP1500.

Cc: stable@vger.kernel.org
Reviewed-and-Tested-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NJay Estabrook <jay.estabrook@gmail.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for kvm_gfn_to_hva_cache_init functions for
reads and writes that will cross a page.  If the range falls within
the same memslot, then this will be a fast operation.  If the range
is split between two memslots, then the slower kvm_read_guest and
kvm_write_guest are used.

Tested: Test against kvm_clock unit tests.
Signed-off-by: NAndrew Honig <ahonig@google.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Pull device-mapper fixes from Alasdair Kergon:
 "A pair of patches to fix the writethrough mode of the device-mapper
  cache target when the device being cached is not itself wrapped with
  device-mapper."

* tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm cache: reduce bio front_pad size in writeback mode
  dm cache: fix writes to cache device in writethrough mode

Pull PCI fixes from Bjorn Helgaas:
 "PCI updates for v3.9:

  ASPM
      Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"
  kexec
      PCI: Don't try to disable Bus Master on disconnected PCI devices
  Platform ROM images
      PCI: Add PCI ROM helper for platform-provided ROM images
      nouveau: Attempt to use platform-provided ROM image
      radeon: Attempt to use platform-provided ROM image
  Hotplug
      PCI/ACPI: Always resume devices on ACPI wakeup notifications
      PCI/PM: Disable runtime PM of PCIe ports
  EISA
      EISA/PCI: Fix bus res reference
      EISA/PCI: Init EISA early, before PNP"

* tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/PM: Disable runtime PM of PCIe ports
  PCI/ACPI: Always resume devices on ACPI wakeup notifications
  PCI: Don't try to disable Bus Master on disconnected PCI devices
  Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"
  radeon: Attempt to use platform-provided ROM image
  nouveau: Attempt to use platform-provided ROM image
  EISA/PCI: Init EISA early, before PNP
  EISA/PCI: Fix bus res reference
  PCI: Add PCI ROM helper for platform-provided ROM images

tty_port_tty_get might return a tty which is NULL. But it is
dereferenced unconditionally in edge_send. Stop dereferencing that by
sending usb_serial_port pointer around.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Johan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.
Signed-of-by: NFelipe Balbi <balbi@ti.com>

"len" comes from the USB transfer and it's probably correct.  The thing
is that we already have similar checks like:

        if (data[i] >= serial->num_ports) {

So adding a sanity test here matches the rest of the code and is a good
idea.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We can remove the "if (urb->actual_length) {" check because checking for
"while (i < urb->actual_length) {" is sufficient.  This lets us pull the
code in one indent level.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In hardware_enqueue code adds one extra td with dma_pool_alloc if
mReq->req.zero is true. When _ep_nuke will be called for that endpoint,
dma_pool_free will not be called to free that memory again. That patch
fixes this.

Cc: stable <stable@vger.kernel.org> # v3.5
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull networking fixes from David Miller:

 1) Fix erroneous sock_orphan() leading to crashes and double
    kfree_skb() in NFC protocol.  From Thierry Escande and Samuel Ortiz.

 2) Fix use after free in remain-on-channel mac80211 code, from Johannes
    Berg.

 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can
    leak it from one namespace into another.  Fix from Gao Feng and
    Patrick McHardy.

 4) Fix overflow in channel scanning array of mwifiex driver, from Stone
    Piao.

 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang.

 6) Synchronization of unicast address lists to the undelying device
    doesn't work because whether to sync is maintained as a boolean
    rather than a true count.  Fix from Vlad Yasevich.

 7) Fix corruption of TSO packets in atl1e by limiting the segmented
    packet length.  From Hannes Frederic Sowa.

 8) Revert bogus AF_UNIX credential passing change and fix the
    coalescing issue properly, from Eric W Biederman.

 9) Changes of ipv4 address lifetime settings needs to generate a
    notification, from Jiri Pirko.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
  netfilter: don't reset nf_trace in nf_reset()
  net: ipv4: notify when address lifetime changes
  ixgbe: fix registration order of driver and DCA nofitication
  af_unix: If we don't care about credentials coallesce all messages
  Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL"
  bonding: remove sysfs before removing devices
  atl1e: limit gso segment size to prevent generation of wrong ip length fields
  net: count hw_addr syncs so that unsync works properly.
  r8169: fix auto speed down issue
  netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths
  mwifiex: limit channel number not to overflow memory
  NFC: microread: Fix build failure due to a new MEI bus API
  iwlwifi: dvm: fix the passive-no-RX workaround
  netfilter: nf_conntrack: fix error return code
  NFC: llcp: Keep the connected socket parent pointer alive
  mac80211: fix idle handling sequence
  netfilter: nfnetlink_acct: return -EINVAL if object name is empty
  netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init()
  netfilter: reset nf_trace in nf_reset
  mac80211: fix remain-on-channel cancel crash
  ...

eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence
their .cmd files don't get included by the build machinery, leading to
the files always getting rebuilt.

Rather than adding the two files individually, take the opportunity and
add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment
at the top of the file to be shrunk quite a bit.

At the same time, remove a pointless flags override line - the variable
assigned to was misspelled anyway, and the options added are
meaningless for assembly sources.

[ hpa: the patch is not minimal, but I am taking it for -urgent anyway
  since the excess impact of the patch seems to be small enough. ]
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The udc uses an shared dma memory space between hard and software. This
memory layout is described in ci13xxx_qh and ci13xxx_td which are marked
with the attribute ((packed)).

The compiler currently does not know about the alignment of the memory
layout, and will create strb and ldrb operations.

The Datasheet of the synopsys core describes, that some operations on
the mapped memory need to be atomic double word operations. I.e. the
next pointer addressing in the qhead, as otherwise the hardware will
read wrong data and totally stuck.

This is also possible while working with the current active td queue,
and preparing the td->ptr.next in software while the hardware is still
working with the current active td which is supposed to be changed:

writeb(0xde, &td->ptr.next + 0x0); /* strb */
writeb(0xad, &td->ptr.next + 0x1); /* strb */

<----- hardware reads value of td->ptr.next and get stuck!

writeb(0xbe, &td->ptr.next + 0x2); /* strb */
writeb(0xef, &td->ptr.next + 0x3); /* strb */

This appeares on armv5 machines where the hardware does not support
unaligned 32bit operations.

This patch adds the attribute ((aligned(4))) to the structures to tell
the compiler to use 32bit operations. It also adds an wmb() for the
prepared TD data before it gets enqueued into the qhead.

Cc: stable <stable@vger.kernel.org> # v3.5
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code
to reset nf_trace in nf_reset(). This is wrong and unnecessary.

nf_reset() is used in the following cases:

- when passing packets up the the socket layer, at which point we want to
  release all netfilter references that might keep modules pinned while
  the packet is queued. nf_trace doesn't matter anymore at this point.

- when encapsulating or decapsulating IPsec packets. We want to continue
  tracing these packets after IPsec processing.

- when passing packets through virtual network devices. Only devices on
  that encapsulate in IPv4/v6 matter since otherwise nf_trace is not
  used anymore. Its not entirely clear whether those packets should
  be traced after that, however we've always done that.

- when passing packets through virtual network devices that make the
  packet cross network namespace boundaries. This is the only cases
  where we clearly want to reset nf_trace and is also what the
  original patch intended to fix.

Add a new function nf_reset_trace() and use it in dev_forward_skb() to
fix this properly.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull MIPS fixes from Ralf Baechle:
 "Fixes for a number of small glitches in various corners of the MIPS
  tree.  No particular areas is standing out.

  With this applied all MIPS defconfigs are building fine.  No merge
  conflicts are expected."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Delete definition of SA_RESTORER.
  MIPS: Fix ISA level which causes secondary cache init bypassing and more
  MIPS: Fix build error cavium-octeon without CONFIG_SMP
  MIPS: Kconfig: Rename SNIPROM too
  MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI"
  MIPS: Unbreak function tracer for 64-bit kernel.

Pull GFS2 fixes from Steven Whitehouse:
 "There are two patches which fix up a couple of minor issues in the DLM
  interface code, a missing error path in gfs2_rs_alloc(), one patch
  which fixes a problem during "withdraw" and a fix for discards/FITRIM
  when using 4k sector sized devices."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Issue discards in 512b sectors
  GFS2: Fix unlock of fcntl locks during withdrawn state
  GFS2: return error if malloc failed in gfs2_rs_alloc()
  GFS2: use memchr_inv
  GFS2: use kmalloc for lvb bitmap

Commit e2eed58b ("IB/qib: change QLogic to Intel") moved a firmware
file potentially breaking the ABI.

This patch reverts that aspect of the fix as well as reverting the
firmware name as used in qib.
Reported-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull spi fixes from Mark Brown:
 "A bunch of small driver fixes plus a fix for error handling in the
  core - nothing too exciting overall."

* tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts
  spi: Unlock a spinlock before calling into the controller driver.
  spi/s3c64xx: modified error interrupt handling and init
  spi/bcm63xx: don't disable non enabled clocks in probe error path
  spi/bcm63xx: Remove unused variable
  spi: slink-tegra20: move runtime pm calls to transfer_one_message

This patch changes GFS2's discard issuing code so that it calls
function sb_issue_discard rather than blkdev_issue_discard. The
code was calling blkdev_issue_discard and specifying the correct
sector offset and sector size, but blkdev_issue_discard expects
these values to be in terms of 512 byte sectors, even if the native
sector size for the device is different. Calling sb_issue_discard
with the BLOCK size instead ensures the correct block-to-512b-sector
translation. I verified that "minlen" is specified in blocks, so
comparing it to a number of blocks is correct.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>