- 05 2月, 2008 12 次提交
-
-
由 Glenn Streiff 提交于
Add a standard NIC and RDMA/iWARP driver for NetEffect 1/10Gb ethernet adapters. Signed-off-by: NGlenn Streiff <gstreiff@neteffect.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Olaf Kirch 提交于
If the allocation of the MTT or the mailbox failed, mthca_fmr_alloc() would return 0 (success) no matter what. This leads to crashes a little down the road, when we try to dereference eg mr->mtt, which was really ERR_PTR(-Ewhatever). Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The string mlx4_ib_version was defined, but never used. Print out the version once when the first device is initialized. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eli Cohen 提交于
We have recently discovered that Tavor mode requires each WQE in a posted list of receive WQEs to have a valid NDA field at all times. This requirement holds true for regular QPs as well as for SRQs. This patch prelinks the receive queue in a regular QP and keeps the free list in SRQ always properly linked. Signed-off-by: NEli Cohen <eli@mellanox.co.il> Reviewed-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eli Cohen 提交于
The SRQ receive posting functions make sure that srq->first_free never becomes negative, so we can remove tests of whether it is negative. Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Jack Morgenstein 提交于
The firmware QUERY_ADAPTER command does not return vendor_id, device_id, and revision_id; eliminate these fields from the query. Initialize the rev_id field of the mlx4 device via init_node_data (MAD IFC query), as is done in the query_device verb implementation. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Jack Morgenstein 提交于
For memfree devices, the firmware QUERY_ADAPTER command does not return vendor_id, device_id, and revision_id; do not return these fields in the QUERY_ADAPTER function for memfree devices. Instead, for memfree devices, initialize the rev_id field of the mthca device via init_node_data (MAD IFC query), as is done in the query_device verb implementation. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
In mthca_reg_phys_mr(), we calculate the page size for the HCA hardware to use to map the buffer list passed in by the consumer. For example, if the consumer passes in [0] addr 0x1000, size 0x1000 [1] addr 0x2000, size 0x1000 then the algorithm would come up with a page size of 0x2000 and a list of two pages, at 0x0000 and 0x2000. Usually, this would work fine since the memory region would start at an offset of 0x1000 and have a length of 0x2000. However, the old code did not take into account the alignment of the IO virtual address passed in. For example, if the consumer passed in a virtual address of 0x6000 for the above, then the offset of 0x1000 would not be used correctly because the page mask of 0x1fff would result in an offset of 0. We can fix this quite neatly by making sure that the page shift we use is no bigger than the first bit where the start of the first buffer and the IO virtual address differ. Also, we can further simplify the code by removing the special case for a single buffer by noticing that it doesn't matter if we use a page size that is too big. This allows the loop to compute the page shift to be replaced with __ffs(). Thanks to Bryan S Rosenburg <rosnbrg@us.ibm.com> for pointing out the original bug and suggesting several ways to improve this patch. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Hoang-Nam Nguyen 提交于
This patch enables ehca to redirect any PMA queries to the actual PMA QP. Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Reviewed-by: NJoachim Fenkes <fenkes@de.ibm.com> Reviewed-by: NChristoph Raisch <raisch@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Joachim Fenkes 提交于
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Joachim Fenkes 提交于
The IB spec doesn't allow packets to QP0 sent on any other VL than VL15. Hardware doesn't filter those packets on the send side, so we need to do this in the driver and firmware. As eHCA doesn't support QP0, we can just filter out all traffic going to QP0, regardless of SL or VL. Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 29 1月, 2008 2 次提交
-
-
由 Denis V. Lunev 提交于
Needed to propagate it down to the __ip_route_output_key. Signed_off_by: Denis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
This patch removes TOPDIR from infiniband Makefile and delete one include statement pointing to a non-existing directory Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <mshefty@ichips.intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 26 1月, 2008 26 次提交
-
-
由 Steve Wise 提交于
Correctly work around T3A issues by checking "hwtype != T3A" instead of "hwtype == T3B". This will be needed for new hardware types. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
This is needed to support zero-stag properly. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
The existing logic incorrectly maps this buffer list: 0: addr 0x10001000, size 0x1000 1: addr 0x10002000, size 0x1000 To this bogus page list: 0: 0x10000000 1: 0x10002000 The shift calculation must also take into account the address of the first entry masked by the page_mask as well as the last address+size rounded up to the next page size. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
- for kernel mode cqs, call event notification handler when flushing. - flush QP when moving from RTS -> CLOSING. - fix logic to identify a kernel mode qp. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Ralph Campbell 提交于
Move the increment of s_hdrwords into the existing if block that tests if we're doing a send with immediate, to save one test of the opcode. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Ralph Campbell 提交于
Add new mappings from port physical state (a HW register value) to the IB SubnGet(PortInfo) port physical state. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dave Olson 提交于
The IBA7220 uses a count-based triggering mechanism, and therefore can't use the same bandwidth verification mechanism as older chips. To support the 7220, allow enabling and disabling armlaunch errors on application request. Minor robustness improvements as well. Signed-off-by: NDave Olson <dave.olson@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dave Olson 提交于
Clean up some unused header fields, minor related cleanup. Signed-off-by: NDave Olson <dave.olson@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael Albaugh 提交于
IBA7220 includes many more configurable IB settings. Getting/setting these is now grouped into a pair of chip specific functions accessed via function pointers. Provide sysfs access to these settings. Signed-off-by: NMichael Albaugh <michael.albaugh@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dave Olson 提交于
This adds the new (sometimes empty) chip-specific functions to the older chips, and makes the initialization and related functions consistent across all 3 chips. Signed-off-by: NDave Olson <dave.olson@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dave Olson 提交于
This code has been unused for some time, but still had leftovers from when it was used. Signed-off-by: Dave Olson <dave.olson@qlogic.com Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Joachim Fenkes 提交于
Some HW revisions of eHCA2 may cause an RC connection to break if they received RDMA Reads over that connection before. This can be prevented by assuring that, after the first RDMA Read, the QP receives a new RDMA Read every few million link packets. Include code into the driver that inserts an empty (size 0) RDMA Read into the message stream every now and then if the consumer doesn't post them frequently enough. Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Hoang-Nam Nguyen 提交于
This patch enhances ehca with a capability to "autodetect" the ports being connected physically. In order to utilize that function the module option nr_ports must be set to -1 (default is 2 - two ports). This feature is experimental and will made the default later. More detail: If the user connects only one port to the switch, current code requires 1) port one to be connected and 2) module option nr_ports=1 to be given. If autodetect is enabled, ehca will not wait at creation of the GSI QP for the respective port to become active. Since firmware does not accept modify_qp() while the port is down at initialization, we need to cache all calls to modify_qp() for the SMI/GSI QP and just return a good return code. When a port is activated and we get a PORT_ACTIVE event, we replay the cached modify-qp() parms and re-trigger any posted recv WRs. Only then do we forward the PORT_ACTIVE event to registered clients. The result of this autodetect patch is that all ports will be accessible by the users. Depending on their respective cabling only those ports that are connected properly will become operable. If a user tries to modify a regular QP of a non-connected port, modify_qp() will fail. Furthermore, ibv_devinfo should show the port state accordingly. Note that this patch primarily improves the loading behaviour of ehca. If the cable is removed while the driver is operating and plugged in again, firmware will handle that properly by sending an appropriate async event. Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Hoang-Nam Nguyen 提交于
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Hoang-Nam Nguyen 提交于
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
There are a few places in the ipath driver where a variable is re-declared within a block where it is already in scope. Most of these extra declarations can simply be removed, since the variable from the outer scope is used in a way so that it does not need to keep its variable across the block with the re-declaration. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
t3_rdma_init_wr.irs is a big-endian field, so declare it as __be32. This fixes one sparse warning. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Anton Blanchard 提交于
Use round_jiffies() to align ehca's 1-second timer with other timers and potentially save power by sleeping cores for longer. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dave Olson 提交于
The original QHT7040 had significant performance issues so there was an additional check in the driver for a newer serial number. Support for the small quantities of that board shipped has been dropped, so this patch removes the special checks to simplify the code. Signed-off-by: NDave Olson <dave.olson@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Arthur Jones 提交于
Different chips have different width interrupt status registers, so add a flag and accessor function to decide which width register read to use. Signed-off-by: NArthur Jones <arthur.jones@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Ralph Campbell 提交于
The 6110 had a bug that caused some registers to be swapped; it was fixed for the 7220 (and didn't affect the 6120 because it had fewer registers). This adds a flag and related code to handle that, and includes some minor cleanups in the same area. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
-
由 Ralph Campbell 提交于
The number of configured ports for the 7220 changes the number of eager TIDs available per port, for all but port 0 (kernel port) which remains constant, so add a field to give port0 count separate from the portdata structure. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Ralph Campbell 提交于
User registers have different alignments on different chips (4KB on older, 64KB on 7220). Allow mapping the user registers on kernels with page sizes up to 64K. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Dave Olson 提交于
Signed-off-by: NDave Olson <dave.olson@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-