- 18 8月, 2010 17 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: AppArmor: fix task_setrlimit prototype
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: vt,console,kdb: preserve console_blanked while in kdb vt: fix regression warnings from KMS merge arm,kgdb: fix GDB_MAX_REGS no longer used kgdb: add missing __percpu markup in arch/x86/kernel/kgdb.c kdb: fix compile error without CONFIG_KALLSYMS
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: platform/x86: move rfkill for Dell Mini 1012 to compal-laptop thinkpad-acpi: Add KEY_CAMERA (Fn-F6) for Lenovo keyboards thinkpad-acpi: add support for model-specific keymaps thinkpad-acpi: lock down size of hotkey keymap thinkpad-acpi: untangle ACPI/vendor backlight selection thinkpad-acpi: find ACPI video device by synthetic HID intel_ips: potential null dereference drivers/platform/x86: Adjust confusing if indentation x86: intel_ips: do not use PCI resources before pci_enable_device()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix false warning saying one of two super blocks is broken nilfs2: fix list corruption after ifile creation failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Fix a memmove bug in dev_gro_receive() net sched: fix some kernel memory leaks netfilter: {ip,ip6,arp}_tables: avoid lockdep false positive Revert "netlink: netlink_recvmsg() fix" ipv6: remove sysctl jiffies conversion on gc_elasticity and min_adv_mss xfrm: Use GFP_ATOMIC in xfrm_compile_policy ath5k: disable ASPM L0s for all cards ath9k_htc: load proper firmware for device ID 7015 wl1251: fix trigger scan timeout usage ath9k_htc: Fix disconnect issue in HT40 mode. ath9k_htc: fix panic on packet injection using airbase-ng tool. ipw2100: register pm_qos request before registering pci driver
-
由 Hugh Dickins 提交于
list_add() corruption messages reported from shmem_fill_super()'s recently introduced percpu_counter_init(): shmem_put_super() needs to remember to percpu_counter_destroy(). And also check error from percpu_counter_init(). Reported-bisected-and-tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix atomic64_t routine return values. sparc64: Fix rwsem constant bug leading to hangs. sparc: Hook up new fanotify and prlimit64 syscalls. sparc: Really fix "console=" for serial consoles.
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: amba clcd: don't disable an already disabled clock ARM: Tighten check for allowable CPSR values ARM: 6329/1: wire up sys_accept4() on ARM ARM: 6328/1: Build with -fno-dwarf2-cfi-asm ARM: 6326/1: kgdb: fix GDB_MAX_REGS no longer used
-
由 David Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel J Blueman 提交于
Using a program like the following: #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/wait.h> int main() { id_t id; siginfo_t infop; pid_t res; id = fork(); if (id == 0) { sleep(1); exit(0); } kill(id, SIGSTOP); alarm(1); waitid(P_PID, id, &infop, WCONTINUED); return 0; } to call waitid() on a stopped process results in access to the child task's credentials without the RCU read lock being held - which may be replaced in the meantime - eliciting the following warning: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/exit.c:1460 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 2 locks held by waitid02/22252: #0: (tasklist_lock){.?.?..}, at: [<ffffffff81061ce5>] do_wait+0xc5/0x310 #1: (&(&sighand->siglock)->rlock){-.-...}, at: [<ffffffff810611da>] wait_consider_task+0x19a/0xbe0 stack backtrace: Pid: 22252, comm: waitid02 Not tainted 2.6.35-323cd+ #3 Call Trace: [<ffffffff81095da4>] lockdep_rcu_dereference+0xa4/0xc0 [<ffffffff81061b31>] wait_consider_task+0xaf1/0xbe0 [<ffffffff81061d15>] do_wait+0xf5/0x310 [<ffffffff810620b6>] sys_waitid+0x86/0x1f0 [<ffffffff8105fce0>] ? child_wait_callback+0x0/0x70 [<ffffffff81003282>] system_call_fastpath+0x16/0x1b This is fixed by holding the RCU read lock in wait_task_continued() to ensure that the task's current credentials aren't destroyed between us reading the cred pointer and us reading the UID from those credentials. Furthermore, protect wait_task_stopped() in the same way. We don't need to keep holding the RCU read lock once we've read the UID from the credentials as holding the RCU read lock doesn't stop the target task from changing its creds under us - so the credentials may be outdated immediately after we've read the pointer, lock or no lock. Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jarek Poplawski 提交于
>Xin Xiaohui wrote: > I looked into the code dev_gro_receive(), found the code here: > if the frags[0] is pulled to 0, then the page will be released, > and memmove() frags left. > Is that right? I'm not sure if memmove do right or not, but > frags[0].size is never set after memove at least. what I think > a simple way is not to do anything if we found frags[0].size == 0. > The patch is as followed. ... This version of the patch fixes the bug directly in memmove. Reported-by: N"Xin, Xiaohui" <xiaohui.xin@intel.com> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Should return 'long' instead of 'int'. Thanks to Dimitris Michailidis and Tony Luck. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
As noticed by Linus, it is critical that some of the rwsem constants be signed. Yet, hex constants are unsigned unless explicitly casted or negated. The most critical one is RWSEM_WAITING_BIAS. This bug was exacerbated by commit 424acaae ("rwsem: wake queued readers when writer blocks on active read lock") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We leak at least 32bits of kernel memory to user land in tc dump, because we dont init all fields (capab ?) of the dumped structure. Use C99 initializers so that holes and non explicit fields are zeroed. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
After commit 24b36f01 (netfilter: {ip,ip6,arp}_tables: dont block bottom half more than necessary), lockdep can raise a warning because we attempt to lock a spinlock with BH enabled, while the same lock is usually locked by another cpu in a softirq context. Disable again BH to avoid these lockdep warnings. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Diagnosed-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Fix the clock enable/disable tracking in the AMBA CLCD driver so that the driver doesn't try to disable an already disabled clock, thereby causing the clock (if shared) to become unbalanced. This resolves a problem with CLCD on LPC32xx ARM platforms. Reported-by: NKevin Wells <wellsk40@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 8月, 2010 10 次提交
-
-
由 Jiri Slaby 提交于
After rlimits tree was merged we get the following errors: security/apparmor/lsm.c:663:2: warning: initialization from incompatible pointer type It is because AppArmor was merged in the meantime, but uses the old prototype. So fix it by adding struct task_struct as a first parameter of apparmor_task_setrlimit. NOTE that this is ONLY a compilation warning fix (and crashes caused by that). It needs proper handling in AppArmor depending on who is the 'task'. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NJohn Johansen <john.johansen@canonical.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 David S. Miller 提交于
The only tricky bit is the compat version of fanotify_mark, which which on 32-bit the 64-bit mark argument is passed in as "high32", "low32". Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wessel 提交于
Commit b45cfba4 (vt,console,kdb: implement atomic console enter/leave functions) introduced the ability to atomically change the console mode with kernel mode setting but did not preserve the state of the console_blanked variable. The console_blanked variable must be restored when executing the con_debug_leave() or further kernel mode set changes (such as using chvt X) will fail to correctly set the state of console. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> CC: Andrew Morton <akpm@linux-foundation.org>
-
由 Jason Wessel 提交于
Fix the following new sparse warnings in vt.c introduced by the commit b45cfba4 (vt,console,kdb: implement atomic console enter/leave functions): drivers/char/vt.c:197:5: warning: symbol 'saved_fg_console' was not declared. Should it be static? drivers/char/vt.c:198:5: warning: symbol 'saved_last_console' was not declared. Should it be static? drivers/char/vt.c:199:5: warning: symbol 'saved_want_console' was not declared. Should it be static? drivers/char/vt.c:200:5: warning: symbol 'saved_vc_mode' was not declared. Should it be static? Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> CC: Andrew Morton <akpm@linux-foundation.org>
-
由 Eric Miao 提交于
According to commit 22eeef4b kgdb,arm: Individual register get/set for arm It's now replaced by DBG_MAX_REG_NUM. Signed-off-by: NEric Miao <eric.y.miao@gmail.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Namhyung Kim 提交于
breakinfo->pev is a pointer to percpu pointer but was missing __percpu markup. Add it. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
If CONFIG_KGDB_KDB is set and CONFIG_KALLSYMS is not set the kernel will fail to build with the error: kernel/built-in.o: In function `kallsyms_symbol_next': kernel/debug/kdb/kdb_support.c:237: undefined reference to `kdb_walk_kallsyms' kernel/built-in.o: In function `kallsyms_symbol_complete': kernel/debug/kdb/kdb_support.c:193: undefined reference to `kdb_walk_kallsyms' The kdb_walk_kallsyms needs a #ifdef proper header to match the C implementation. This patch also fixes the compiler warnings in kdb_support.c when compiling without CONFIG_KALLSYMS set. The compiler warnings are a result of the kallsyms_lookup() macro not initializing the two of the pass by reference variables. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Reported-by: NMichal Simek <monstr@monstr.eu>
-
由 David S. Miller 提交于
If a video head and keyboard are hooked up, specifying "console=ttyS0" or similar to use a serial console will not work properly. The key issue is that we must register all serial console capable devices with register_console(), otherwise the command line specified device won't be found. The sun serial drivers would only register themselves as console devices if the OpenFirmware specified console device node matched. To fix this part we now unconditionally get the serial console register by setting serial_drv->cons always. Secondarily we must not add_preferred_console() using the firmware provided console setting if the user gaven an override on the kernel command line using "console=" The "primary framebuffer" matching logic was always triggering o n openfirmware device node match, make it not when a command line override was given. Reported-by: NFrans Pop <elendil@planet.nl> Tested-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 8月, 2010 13 次提交
-
-
由 Victor van den Elzen 提交于
Like others in the Mini series, the Dell Mini 1012 does not support the smbios hook required by dell-laptop. Signed-off-by: NVictor van den Elzen <victor.vde@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Jens Taprogge 提交于
On the T410s and most likely other current models, Fn-F6 is labeled as Camera/Headphone key. Report key presses as KEY_CAMERA. Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org> Acked-by: NJerone Young <jerone.young@canonical.com> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
Use the quirks engine to select model-specific keymaps, which makes it much easier to extend should we need it. Keycodes are based on the tables at http://www.thinkwiki.org/wiki/Default_meanings_of_special_keys. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
Use a safer coding style for the hotkey keymap. This does not fix any problems, as the current code is correct. But it might help avoid mistakes in the future. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
acpi_video_backlight_support() already tells us if ACPI is handling backlight control through the generic ACPI handle. It is better to just trust it. While at it, adjust down a printk priority, and test earlier for brightness_enable=0. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
The Linux ACPI core locates the ACPI video devices for us and marks them with ACPI_VIDEO_HID. Use that information to locate the video device instead of a half-baked hunt for _BCL. This uncouples the detection of the number of backlight brightness levels on ThinkPads from the ACPI paths in vid_handle. With this change, the driver should be able to always detect whether the ThinkPad uses a 8-level or 16-level brightness scale even on newer models for which the vid_handle paths have not been updated yet. It will skip deactivated devices in the ACPI device tree, which is a change in behaviour. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Dan Carpenter 提交于
There is a potential NULL dereference of "limits." We can just return NULL earlier to avoid it. The caller already handles NULL returns. Signed-off-by: NDan Carpenter <error27@gmail.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Julia Lawall 提交于
The assignment of ret to -EIO appears to only make sense if the branch that it is aligned with is executed, so move it into that branch. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Kulikov Vasiliy 提交于
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 David S. Miller 提交于
This reverts commit 1235f504. It causes regressions worse than the problem it was trying to fix. Eric will try to solve the problem another way. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ryusuke Konishi 提交于
After applying commit b2ac86e1, the following message got appeared after unclean shutdown: > NILFS warning: broken superblock. using spare superblock. This turns out to be a false message due to the change which updates two super blocks alternately. The secondary super block now can be selected if it's newer than the primary one. This kills the false warning by suppressing it if another super block is not actually broken. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
If nilfs_attach_checkpoint() gets a memory allocation failure during creation of ifile, it will return without removing nilfs_sb_info struct from ns_supers list. When a concurrently mounted snapshot is unmounted or another new snapshot is mounted after that, this causes kernel oops as below: > BUG: unable to handle kernel NULL pointer dereference at (null) > IP: [<f83662ff>] nilfs_find_sbinfo+0x74/0xa4 [nilfs2] > *pde = 00000000 > Oops: 0000 [#1] SMP <snip> > Call Trace: > [<f835dc29>] ? nilfs_get_sb+0x165/0x532 [nilfs2] > [<c1173c87>] ? ida_get_new_above+0x16d/0x187 > [<c109a7f8>] ? alloc_vfsmnt+0x7e/0x10a > [<c1070790>] ? kstrdup+0x2c/0x40 > [<c1089041>] ? vfs_kern_mount+0x96/0x14e > [<c108913d>] ? do_kern_mount+0x32/0xbd > [<c109b331>] ? do_mount+0x642/0x6a1 > [<c101a415>] ? do_page_fault+0x0/0x2d1 > [<c1099c00>] ? copy_mount_options+0x80/0xe2 > [<c10705d8>] ? strndup_user+0x48/0x67 > [<c109b3f1>] ? sys_mount+0x61/0x90 > [<c10027cc>] ? sysenter_do_call+0x12/0x22 This fixes the problem. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: stable@kernel.org
-
由 Linus Torvalds 提交于
-