Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Blah.  The patch [0] I recently sent fixing errors with
in_hugepage_area() and prepare_hugepage_range() for powerpc itself has
an off-by-one bug.  Furthermore, the related functions
touches_hugepage_*_range() and within_hugepage_*_range() are also
buggy.  Some of the bugs, like those addressed in [0] originated with
commit 7d24f0b8 where we tweaked the
semantics of where hugepages are allowed.  Other bugs have been there
essentially forever, and are due to the undefined behaviour of '<<'
with shift counts greater than the type width (LOW_ESID_MASK could
return non-zero for high ranges with the right congruences).

The good news is that I now have a testsuite which should pick up
things like this if they creep in again.

[0] "powerpc-fix-for-hugepage-areas-straddling-4gb-boundary"
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

With the removal of include/asm-powerpc, we no longer need
arch/powerpc/include/asm for the 64 bit build.  We also do not need
-Iarch/powerpc for the 64 bit build either.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

SGI-PV: 946205
SGI-Modid: xfs-linux-melb:xfs-kern:24567a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 941645
SGI-Modid: xfs-linux-melb:xfs-kern:24566a
Signed-off-by: NNathan Scott <nathans@sgi.com>

its queue of IO completion callbacks, thus creating the deadlock between
umount and xfslogd. Breaking the loop solves the problem.

SGI-PV: 943821
SGI-Modid: xfs-linux-melb:xfs-kern:202363a
Signed-off-by: NFelix Blyakher <felixb@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

direct write.

SGI-PV: 944820
SGI-Modid: xfs-linux-melb:xfs-kern:24351a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 945483
SGI-Modid: xfs-linux-melb:xfs-kern:201884a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 945311
SGI-Modid: xfs-linux-melb:xfs-kern:201708a
Signed-off-by: NEric Sandeen <sandeen@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

This code fixes a tiny problem with the recent fbcon rotation changes:
fb_prepare_logo doesn't check the return value of fb_find_logo and that
causes a crash for my while booting.

Obvious & working & tested fix is here.
Signed-off-by: NJasper Spaans <jasper@vs19.net>
Acked-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

remove redundant include
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix kernel-doc warning in linux/usb.h.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On Wed, Nov 16, 2005 at 06:34:24PM -0800, Pete Zaitcev wrote:
>On Wed, 16 Nov 2005 23:52:32 +0100, David Hrdeman <david@2gen.com> wrote:
>> usb-storage: waiting for device to settle before scanning
>>   Vendor: I0MEGA    Model: UMni1GB*IOM2K4    Rev: 1.01
>>   Type:   Direct-Access                      ANSI SCSI revision: 02
>> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 00 00 00
>> sda: assuming drive cache: write through
>> ioctl_internal_command: <8 0 0 0> return code = 8000002
>>    : Current: sense key=0x0
>>     ASC=0x0 ASCQ=0x0
>> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
>
>I think it's harmless. I saw things like that, and initially I plugged
>them with workarounds like this:

Thanks for the pointer, and yes, it is harmless, but it floods the
console with the messages which hides other (potentially important)
messages...following your example I've made a patch which fixes the
problem.
Signed-off-by: NDavid Hrdeman <david@2gen.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This should fix a suspend/resume issues that appear with OHCI on some
PPC hardware.  The PCI layer should doesn't have the hooks needed for
such ASIC-specific hooks (in this case, software clock gating), so
this moves the code to do that into hcd-pci.c ... where it can be
done after the relevant PCI PM state transition (to/from D3).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Moving the PCI-specific parts of the EHCI driver into their own file
created a few issues ... notably on resume paths which (like swsusp)
require re-initializing the controller.  This patch:

 - Splits the EHCI startup code into run-once HCD setup code and
   separate "init the hardware" reinit code.  (That reinit code is
   a superset of the "early usb handoff" code.)

 - Then it makes the PCI init code run both, and the resume code only
   run the reinit code.

 - It also removes needless pci wrappers around EHCI start/stop methods.

 - Removes a byteswap issue that would be seen on big-endian hardware.

The HCD glue still doesn't actually provide a good way to do all this
run-one init stuff in one place though.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This cleans up the recent updates to EHCI PCI support:

  - Gets rid of checks for "is this a PCI device", they're no
    longer needed since this is now all PCI-only code.

  - Reduce log spamming:  MWI is only interesting in the atypical
    case that it can actually be used.

  - Whitespace cleanup, as appropriate for a new file with no
    other pending patches.

So other than that minor logging change, no functional updates.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes some bugs in EHCI suspend/resume that joined us over the past
few releases (as usbcore, PCI, pmcore, and other components evolved):

  - Removes suspend and resume recursion from the EHCI driver, getting
    rid of the USB_SUSPEND special casing.

  - Updates the wakeup mechanism to work again; there's a newish usbcore
    call it needs to use.

  - Provide simpler tests for "do we need to restart from scratch", to
    address another case where PCI Vaux was lost.  (In this case it was
    restoring a swsusp snapshot, but there could be others.)

Un-exports a symbol that was temporarily exported.

A notable change from previous version is that this doesn't move
the spinlock init, so there's still a resume/reinit path bug.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds two new devices to the ftdi_sio driver's device ID
table.  The device IDs were supplied by Stefan Nies of KOBIL Systems for
two of their devices using the FTDI chip.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch solves the following problem I've already discovered on the
latest 2.6.15-rc1-git1 kernel:

Nov 13 07:37:28 wrobel kernel: Bad page state at free_hot_cold_page (in process 'motion', page c164e020)
Nov 13 07:37:28 wrobel kernel: flags:0x40000400 mapping:00000000 mapcount:0 count:0
Nov 13 07:37:28 wrobel kernel: Backtrace:
Nov 13 07:37:28 wrobel kernel:  [<c0146d86>] bad_page+0x85/0xbe
Nov 13 07:37:28 wrobel kernel:  [<c0147629>] free_hot_cold_page+0x54/0x129
Nov 13 07:37:28 wrobel kernel:  [<c01598c6>] __vunmap+0xa9/0xfe
Nov 13 07:37:28 wrobel kernel:  [<c0154114>] vmalloc_to_page+0x34/0x55
Nov 13 07:37:28 wrobel kernel:  [<c0159942>] vfree+0x27/0x35
Nov 13 07:37:28 wrobel kernel:  [<f8a20292>]  sn9c102_release_buffers+0x30/0x3f [sn9c102]
Nov 13 07:37:28 wrobel kernel:  [<f8a231c2>] sn9c102_release+0x37/0xeb [sn9c102]
Nov 13 07:37:28 wrobel kernel:  [<c0163e74>] __fput+0xa9/0x1aa
Nov 13 07:37:28 wrobel kernel:  [<c01624f7>] filp_close+0x49/0x6d
Nov 13 07:37:30 wrobel kernel:  [<c016258f>] sys_close+0x74/0x95
Nov 13 07:37:30 wrobel kernel:  [<c0102ef9>] syscall_call+0x7/0xb
Nov 13 07:37:31 wrobel kernel: Trying to fix it up, but a reboot is needed
Signed-off-by: NDamian Wrobel <dwrobel@ertel.com.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The DBG() call where updated with the appropriate KERN_* symbol.
Signed-off-by: NDaniel Marjamki <daniel.marjamaki@comhem.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix kernel-doc warning in pci/pci-acpi.c.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When attempting to hotadd a PCI card with a bridge on it, I saw
the kernel reporting resource collision errors even when there were
really no collisions. The problem is that the code doesn't skip
over "invalid" resources with their resource type flag not set.
Others have reported similar problems at boot time and for
non-bridge PCI card hotplug too, where the code flags a
resource collision for disabled ROMs. This patch fixes both
problems.
Signed-off-by: NRajesh Shah <rajesh.shah@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Per the PCI Express spec, the power-fault-detected bit in the
slot status register can be set anytime hardware detects a power
fault, regardless of whether the slot has a device populated in
it or not. This bit is sticky and must be explicitly cleared.
This patch is needed to allow hot-add after such a power fault
has been detected.
Signed-off-by: NRajesh Shah <rajesh.shah@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Modified common.c so it's using the appropriate KERN_* in printk() calls.
Signed-off-by: NDaniel Marjamkia <daniel.marjamaki@comhem.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Trivial patch to report both hdaps axises to the joystick device, not
just the X axis.
Signed-off-by: NRobert Love <rml@novell.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a bug where setting the low fan speed limits will not work if no
data was ever read through the sysfs interface and the fan clock
dividers have not been explicitely set yet either. The reason is that
data->fan_div[nr] may currently be used before it is initialized from
the chip register values. The fix is to explicitely initialize
data->fan_div[nr] before using it.

Bug reported, and fix tested, by Nicolas Mailhot.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the lm78 VID reading, which I accidentally broke while making
this driver use the common vid_from_reg function rather than
reimplementing its own in 2.6.14-rc1.

I'm not proud of it, trust me.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add SENSORS_LIMIT in store VCore limit functions. This fixes a potential
u8 overflow on out-of-range user input.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Greg requested a patch to update MAINTAINERS with more SCM entries.
The patch below is what I've found so far.
Signed-off-by: NJosh Boyer <jwboyer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Pavel Machek points out that for git repos, what we include is not
actually a URL.  It is undesirable to use a URL since git repos can be
accessed in many different ways.
Signed-off-by: NJody McIntyre <scjody@steamballoon.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here's the MTD one.  More later as I find them.
Signed-off-by: NJosh Boyer <jwboyer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch (as603) makes a few small fixes to the driver core:

Change spin_lock_irq for a klist lock to spin_lock;

Fix reference count leaks;

Minor spelling and formatting changes.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We must recompute bridge features everytime the list of underlying 
devices changes, or we might end up with features that are not
supported by all devices (eg. NETIF_F_TSO)
This patch adds the missing recompute when adding a device to the bridge.
Signed-off-by: NOlaf Rempel <razzor@kopf-tisch.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/ipv4/netfilter/ip_conntrack_netlink.c: In function 'ctnetlink_dump_table':
net/ipv4/netfilter/ip_conntrack_netlink.c:409: warning: implicit declaration of function 'local_bh_disable'
net/ipv4/netfilter/ip_conntrack_netlink.c:427: warning: implicit declaration of function 'local_bh_enable'
Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a 32 bit integer overflow in invalidate_inode_pages2_range.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>