- 10 8月, 2017 2 次提交
-
-
由 Yunlong Song 提交于
Signed-off-by: NYunlong Song <yunlong.song@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlong Song 提交于
When cur_valid_map passes the f2fs_test_and_set(,clear)_bit test, cur_valid_map_mir update is skipped unlikely, so fix it. The fix now changes the mirror check together with cur_valid_map all the time. Signed-off-by: NYunlong Song <yunlong.song@huawei.com> Signed-off-by: NChao Yu <yuchao0@huawei.com> [Jaegeuk Kim: Fix unused variable and add unlikely for corner condition.] Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 8月, 2017 5 次提交
-
-
由 Jaegeuk Kim 提交于
This patch reduces contention of printks. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch exposes what features are supported by current f2fs build to sysfs entry via: /sys/fs/f2fs/features/ /sys/fs/f2fs/dev/features Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch adds to support inode checksum in f2fs. Signed-off-by: NChao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix verification flow] Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This must return size, not error number. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlong Song 提交于
Let node writeback also do f2fs_balance_fs to ensure there are always enough free segments. Signed-off-by: NYunlong Song <yunlong.song@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 01 8月, 2017 10 次提交
-
-
由 Chao Yu 提交于
This patch introduces f2fs_statfs_project, it enables to show usage status of directory tree which is limited with project quota. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch adds FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR ioctl interface support for f2fs. The interface is kept consistent with the one of ext4/xfs. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
We have a node chain to serialize node block writes, so if any IOs for node block writes are reordered, we'll get broken node chain. IOWs, roll-forward recovery will see all or none node blocks given fsync mark. E.g., Node chain consists of: N1 -> N2 -> N3 -> NFSYNC -> N1' -> N2' -> N'FSYNC Reordered to: 1) N1 -> N2 -> N3 -> N2' -> NFSYNC -> N'FSYNC -> power-cut 2) N1 -> N2 -> N3 -> N1' -> NFSYNC -> power-cut 3) N1 -> N2 -> NFSYNC -> N1' -> N'FSYNC -> N3 -> power-cut 4) N1 -> NFSYNC -> N1' -> N2' -> N'FSYNC -> N3 -> power-cut Roll-forward recovery can proceed to: 1) N1 -> N2 -> N3 -> NFSYNC -> X 2) N1 -> N2 -> N3 -> NFSYNC -> N1' -> X 3) N1 -> N2 -> N3 -> FSYNC -> N1' -> X 4) N1 -> X Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch changes the function names of sysfs init to follow ext4. f2fs_init_sysfs <-> f2fs_register_sysfs f2fs_exit_sysfs <-> f2fs_unregister_sysfs Suggested-by: NChao Yu <yuchao0@huawei.com> Reivewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch adds to support plain project quota. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In ->lookup(), we will have a try to recover dot or dotdot for corrupted directory, once disk quota is on, if it allocates new block during dotdot recovery, we need to record disk quota info for the allocation, so this patch fixes this issue by adding missing dquot_initialize() in __recover_dot_dentries. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch tries to make below macros calculating max inline size, inline dentry field size considerring reserving size-changeable space: - MAX_INLINE_DATA - NR_INLINE_DENTRY - INLINE_DENTRY_BITMAP_SIZE - INLINE_RESERVED_SIZE Then, when inline_{data,dentry} options is enabled, it allows us to reserve inline space with different size flexibly for adding newly introduced inode attribute. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch adds an ioctl to provide feature information to user. For exapmle, SQLite can use this ioctl to detect whether f2fs support atomic write or not. Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
When ->freeze_fs is called from lvm for doing snapshot, it needs to make sure there will be no more changes in filesystem's data, however, previously, background threads like GC thread wasn't aware of freezing, so in environment with active background threads, data of snapshot becomes unstable. This patch fixes this issue by adding sb_{start,end}_intwrite in below background threads: - GC thread - flush thread - discard thread Note that, don't use sb_start_intwrite() in gc_thread_func() due to: generic/241 reports below bug: ====================================================== WARNING: possible circular locking dependency detected 4.13.0-rc1+ #32 Tainted: G O ------------------------------------------------------ f2fs_gc-250:0/22186 is trying to acquire lock: (&sbi->gc_mutex){+.+...}, at: [<f8fa7f0b>] f2fs_sync_fs+0x7b/0x1b0 [f2fs] but task is already holding lock: (sb_internal#2){++++.-}, at: [<f8fb5609>] gc_thread_func+0x159/0x4a0 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (sb_internal#2){++++.-}: __lock_acquire+0x405/0x7b0 lock_acquire+0xae/0x220 __sb_start_write+0x11d/0x1f0 f2fs_evict_inode+0x2d6/0x4e0 [f2fs] evict+0xa8/0x170 iput+0x1fb/0x2c0 f2fs_sync_inode_meta+0x3f/0xf0 [f2fs] write_checkpoint+0x1b1/0x750 [f2fs] f2fs_sync_fs+0x85/0x1b0 [f2fs] f2fs_do_sync_file.isra.24+0x137/0xa30 [f2fs] f2fs_sync_file+0x34/0x40 [f2fs] vfs_fsync_range+0x4a/0xa0 do_fsync+0x3c/0x60 SyS_fdatasync+0x15/0x20 do_fast_syscall_32+0xa1/0x1b0 entry_SYSENTER_32+0x4c/0x7b -> #1 (&sbi->cp_mutex){+.+...}: __lock_acquire+0x405/0x7b0 lock_acquire+0xae/0x220 __mutex_lock+0x4f/0x830 mutex_lock_nested+0x25/0x30 write_checkpoint+0x2f/0x750 [f2fs] f2fs_sync_fs+0x85/0x1b0 [f2fs] sync_filesystem+0x67/0x80 generic_shutdown_super+0x27/0x100 kill_block_super+0x22/0x50 kill_f2fs_super+0x3a/0x40 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x69/0x80 exit_to_usermode_loop+0x57/0x92 do_fast_syscall_32+0x18c/0x1b0 entry_SYSENTER_32+0x4c/0x7b -> #0 (&sbi->gc_mutex){+.+...}: validate_chain.isra.36+0xc50/0xdb0 __lock_acquire+0x405/0x7b0 lock_acquire+0xae/0x220 __mutex_lock+0x4f/0x830 mutex_lock_nested+0x25/0x30 f2fs_sync_fs+0x7b/0x1b0 [f2fs] f2fs_balance_fs_bg+0xb9/0x200 [f2fs] gc_thread_func+0x302/0x4a0 [f2fs] kthread+0xe9/0x120 ret_from_fork+0x19/0x24 other info that might help us debug this: Chain exists of: &sbi->gc_mutex --> &sbi->cp_mutex --> sb_internal#2 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sb_internal#2); lock(&sbi->cp_mutex); lock(sb_internal#2); lock(&sbi->gc_mutex); *** DEADLOCK *** 1 lock held by f2fs_gc-250:0/22186: #0: (sb_internal#2){++++.-}, at: [<f8fb5609>] gc_thread_func+0x159/0x4a0 [f2fs] stack backtrace: CPU: 2 PID: 22186 Comm: f2fs_gc-250:0 Tainted: G O 4.13.0-rc1+ #32 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack+0x5f/0x92 print_circular_bug+0x1b3/0x1bd validate_chain.isra.36+0xc50/0xdb0 ? __this_cpu_preempt_check+0xf/0x20 __lock_acquire+0x405/0x7b0 lock_acquire+0xae/0x220 ? f2fs_sync_fs+0x7b/0x1b0 [f2fs] __mutex_lock+0x4f/0x830 ? f2fs_sync_fs+0x7b/0x1b0 [f2fs] mutex_lock_nested+0x25/0x30 ? f2fs_sync_fs+0x7b/0x1b0 [f2fs] f2fs_sync_fs+0x7b/0x1b0 [f2fs] f2fs_balance_fs_bg+0xb9/0x200 [f2fs] gc_thread_func+0x302/0x4a0 [f2fs] ? preempt_schedule_common+0x2f/0x4d ? f2fs_gc+0x540/0x540 [f2fs] kthread+0xe9/0x120 ? f2fs_gc+0x540/0x540 [f2fs] ? kthread_create_on_node+0x30/0x30 ret_from_fork+0x19/0x24 The deadlock occurs in below condition: GC Thread Thread B - sb_start_intwrite - f2fs_sync_file - f2fs_sync_fs - mutex_lock(&sbi->gc_mutex) - write_checkpoint - block_operations - f2fs_sync_inode_meta - iput - sb_start_intwrite - mutex_lock(&sbi->gc_mutex) Fix this by altering sb_start_intwrite to sb_start_write_trylock. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 29 7月, 2017 3 次提交
-
-
由 Jaegeuk Kim 提交于
This patch resolves the below scenario. == Process 1 == == Process 2 == open(w) open(rw) begin write(new_#1) process_crash f_op->flush locks_remove_posix f_op>release read (new_#1) In order to avoid corrupted database caused by new_#1, we must do roll-back at process_crash time. In order to check that, this patch keeps task which triggers transaction begin, and does roll-back in f_op->flush before removing file locks. Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
It'd be better to retry writing atomic pages when we get -ENOMEM. Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Ernesto A. Fernández 提交于
When changing a file's acl mask, __f2fs_set_acl() will first set the group bits of i_mode to the value of the mask, and only then set the actual extended attribute representing the new acl. If the second part fails (due to lack of space, for example) and the file had no acl attribute to begin with, the system will from now on assume that the mask permission bits are actual group permission bits, potentially granting access to the wrong users. Prevent this by only changing the inode mode after the acl has been set. Signed-off-by: NErnesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 27 7月, 2017 3 次提交
-
-
由 Yunlei He 提交于
recovery file A: recovery file B: -get_dnode_of_data -alloc_nid -recover_xattr_data -set_node_addr(sbi, &ni, NEW_ADDR, false); --->bug_on for nid has been used by file A In recovery process, new allocated node blocks may "reuse" xattr block nids, this patch alloc new nids for xattr blocks in recovery process to avoid this problem. Signed-off-by: NYunlei He <heyunlei@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Use f2fs_dentry_ptr structure to indicate inline dentry structure as much as possible, so we can wrap inline dentry with size-fixed fields to the one with size-changeable fields. With this change, we can handle size-changeable inline dentry more easily. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlei He 提交于
This patch remove unused input parameter in function new_node_page. Signed-off-by: NYunlei He <heyunlei@huawei.com> Signed-off-by: NYong Sheng <shengyong1@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 26 7月, 2017 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Three small fixes. The transfer size fixes are actually correcting some performance drops on the hpsa and smartpqi cards. The cards actually have an internal cache for request speed up but bypass it for transfers > 1MB. Since 4.3 the efficiency of our merges has rendered the cache mostly unused, so limit transfers to under 1MB to recover the cache boost" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: fix static checker warning in sg_is_valid_dxfer scsi: smartpqi: limit transfer length to 1MB scsi: hpsa: limit transfer length to 1MB
-
git://git.infradead.org/users/hch/uuid由 Linus Torvalds 提交于
Pull uuid fixes from Christoph Hellwig: - add a missing "!" in the uuid tests - remove the last remaining user of the uuid_be type, and then the type and its helpers * tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid: uuid: remove uuid_be thunderbolt: use uuid_t instead of uuid_be uuid: fix incorrect uuid_equal conversion in test_uuid_test
-
git://git.infradead.org/users/hch/dma-mapping由 Linus Torvalds 提交于
Pull dma mapping fixes from Christoph Hellwig: "split the global dma coherent pool from the per-device pool. This fixes a regression in the earlier 4.13 pull requests where the global pool would override a per-device CMA pool (Vladimir Murzin)" * tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping: ARM: NOMMU: Wire-up default DMA interface dma-coherent: introduce interface for default DMA pool
-
- 25 7月, 2017 3 次提交
-
-
git://github.com/kleikamp/linux-shaggy由 Linus Torvalds 提交于
Pull JFS fixes from David Kleikamp. * tag 'jfs-4.13' of git://github.com/kleikamp/linux-shaggy: jfs: preserve i_mode if __jfs_set_acl() fails jfs: Don't clear SGID when inheriting ACLs jfs: atomically read inode size
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - regression fix (missing IRQs) for devices that require 'always poll' quirk, from Dmitry Torokhov - new device ID addition to Ortek driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: ortek: add one more buggy device HID: usbhid: fix "always poll" quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "Three bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: set change and reference bit on lazy key enablement s390: chp: handle CRW_ERC_INIT for channel-path status change s390/perf: fix problem state detection
-
- 24 7月, 2017 7 次提交
-
-
由 Christoph Hellwig 提交于
Everything uses uuid_t now. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAmir Goldstein <amir73il@gmail.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Christoph Hellwig 提交于
Switch thunderbolt to the new uuid type. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAmir Goldstein <amir73il@gmail.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
-
由 Benjamin Tissoires 提交于
The iHome keypad also requires the same tweak we are doing for other Ortek devices. Reported-by: NMairin Duffy <duffy@redhat.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This adds a perl script to actually parse the MAINTAINERS file, clean up some whitespace in it, warn about errors in it, and then properly sort the end result. My perl-fu is atrocious, so the script has basically been created by randomly putting various characters in a pile, mixing them around, and then looking it the end result does anything interesting when used as a perl script. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Prepping for scripting the MAINTAINERS file cleanup (and possible split) showed a couple of cases where the headers for a couple of entries were bogus. There's a few different kinds of bogosities: - the X-GENE SOC EDAC case was confused and split over two lines - there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all different things. - the NOKIA N900 CAMERA SUPPORT" was duplicated all of which were more obvious when you started doing associative arrays in perl to track these things by the header (so that we can alphabetize this thing properly, and so that we might split it up by the data too). Cc: Joe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fixes from Juergen Gross: "Some fixes and cleanups for running under Xen" * tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: don't online new memory initially xen/x86: fix cpu hotplug xen/grant-table: log the lack of grants xen/x86: Don't BUG on CPU0 offlining
-
- 23 7月, 2017 4 次提交
-
-
由 Juergen Gross 提交于
When setting up the Xenstore watch for the memory target size the new watch will fire at once. Don't try to reach the configured target size by onlining new memory in this case, as the current memory size will be smaller in almost all cases due to e.g. BIOS reserved pages. Onlining new memory will lead to more problems e.g. undesired conflicts with NVMe devices meant to be operated as block devices. Instead remember the difference between target size and current size when the watch fires for the first time and apply it to any further size changes, too. In order to avoid races between balloon.c and xen-balloon.c init calls do the xen-balloon.c initialization from balloon.c. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Juergen Gross 提交于
Commit dc6416f1 ("xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()") introduced an error leading to a stack overflow of the idle task when a cpu was brought offline/online many times: by calling cpu_startup_entry() instead of returning at the end of xen_play_dead() do_idle() would be entered again and again. Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing to return from xen_play_dead(). Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Wengang Wang 提交于
log a message when we enter this situation: 1) we already allocated the max number of available grants from hypervisor and 2) we still need more (but the request fails because of 1)). Sometimes the lack of grants causes IO hangs in xen_blkfront devices. Adding this log would help debuging. Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
CONFIG_BOOTPARAM_HOTPLUG_CPU0 allows to offline CPU0 but Xen HVM guests BUG() in xen_teardown_timer(). Remove the BUG_ON(), this is probably a leftover from ancient times when CPU0 hotplug was impossible, it works just fine for HVM. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-