- 30 1月, 2008 40 次提交
-
-
由 Avi Kivity 提交于
Instructions like 'inc reg' that have the register operand encoded in the opcode are currently specially decoded. Extend decode_register_operand() to handle that case, indicated by having DstReg or SrcReg without ModRM. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Share the common parts of SrcReg and DstReg decoding. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
This patch moves implementation of the following functions from kvm_main.c to x86.c: free_pio_guest_pages, vcpu_find_pio_dev, pio_copy_data, complete_pio, kernel_pio, pio_string_write, kvm_emulate_pio, kvm_emulate_pio_string The function inject_gp, which was duplicated by yesterday's patch series, is removed from kvm_main.c now because it is not needed anymore. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
This patch moves the following functions to from kvm_main.c to x86.c: emulator_read/write_std, vcpu_find_pervcpu_dev, vcpu_find_mmio_dev, emulator_read/write_emulated, emulator_write_phys, emulator_write_emulated_onepage, emulator_cmpxchg_emulated, get_setment_base, emulate_invlpg, emulate_clts, emulator_get/set_dr, kvm_report_emulation_failure, emulate_instruction The following data type is moved to x86.c: struct x86_emulate_ops emulate_ops Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
This patch moves the implementation of the functions of kvm_get/set_msr, kvm_get/set_msr_common, and set_efer from kvm_main.c to x86.c. The definition of EFER_RESERVED_BITS is moved too. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Anthony Liguori 提交于
KVM's nopage handler calls gfn_to_page() which acquires the mmap_sem when calling out to get_user_pages(). nopage handlers are already invoked with the mmap_sem held though. Introduce a __gfn_to_page() for use by the nopage handler which requires the lock to already be held. This was noticed by tglx. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
This patch based on CR8/TPR patch, and enable the TPR shadow (FlexPriority) for 32bit Windows. Since TPR is accessed very frequently by 32bit Windows, especially SMP guest, with FlexPriority enabled, we saw significant performance gain. Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
This patch moves the definitions of CR0_RESERVED_BITS, CR4_RESERVED_BITS, and CR8_RESERVED_BITS along with the following functions from kvm_main.c to x86.c: set_cr0(), set_cr3(), set_cr4(), set_cr8(), get_cr8(), lmsw(), load_pdptrs() The static function wrapper inject_gp is duplicated in kvm_main.c and x86.c for now, the version in kvm_main.c should disappear once the last user of it is gone too. The function load_pdptrs is no longer static, and now defined in x86.h for the time being, until the last user of it is gone from kvm_main.c. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
This patch moves the implementation of get_apic_base and set_apic_base from kvm_main.c to x86.c Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
This patch moves the definition of segment_descriptor_64 for AMD64 and EM64T from kvm_main.c to segment_descriptor.h. It also adds a proper #ifndef...#define...#endif around that header file. The implementation of segment_base is moved from kvm_main.c to x86.c. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Carsten Otte 提交于
This patch splits kvm_vm_ioctl into archtecture independent parts, and x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c. The patch is unchanged since last submission. Common ioctls for all architectures are: KVM_CREATE_VCPU, KVM_GET_DIRTY_LOG, KVM_SET_USER_MEMORY_REGION x86 specific ioctls are: KVM_SET_MEMORY_REGION, KVM_GET/SET_NR_MMU_PAGES, KVM_SET_MEMORY_ALIAS, KVM_CREATE_IRQCHIP, KVM_CREATE_IRQ_LINE, KVM_GET/SET_IRQCHIP KVM_SET_TSS_ADDR Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Emulation may cause a shadow pte to be instantiated, which requires memory resources. Make sure the caches are filled to avoid an oops. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The code that dispatches the page fault and emulates if we failed to map is duplicated across vmx and svm. Merge it to simplify further bugfixing. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The 'mov abs' instruction family (opcodes 0xa0 - 0xa3) still depends on cr2 provided by the page fault handler. This is wrong for several reasons: - if an instruction accessed misaligned data that crosses a page boundary, and if the fault happened on the second page, cr2 will point at the second page, not the data itself. - if we're emulating in real mode, or due to a FlexPriority exit, there is no cr2 generated. So, this change adds decoding for this instruction form and drops reliance on cr2. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
This patch lets GCC to determine which registers to save when we switch to/from a VCPU in the case of AMD i386 * Original code saves following registers: ebx, ecx, edx, esi, edi, ebp * Patched code: - informs GCC that we modify following registers using the clobber description: ebx, ecx, edx, esi, edi - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber description. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
This patch lets GCC to determine which registers to save when we switch to/from a VCPU in the case of AMD x86_64. * Original code saves following registers: rbx, rcx, rdx, rsi, rdi, rbp, r8, r9, r10, r11, r12, r13, r14, r15 * Patched code: - informs GCC that we modify following registers using the clobber description: rbx, rcx, rdx, rsi, rdi r8, r9, r10, r11, r12, r13, r14, r15 - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber description. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
This patch lets GCC to determine which registers to save when we switch to/from a VCPU in the case of intel i386. * Original code saves following registers: eax, ebx, ecx, edx, edi, esi, ebp (using popa) * Patched code: - informs GCC that we modify following registers using the clobber description: ebx, edi, rsi - doesn't save eax because it is an output operand (vmx->fail) - cannot put ecx in clobber description because it is an input operand, but as we modify it and we want to keep its value (vcpu), we must save it (pop/push) - ebp is saved (pop/push) because GCC seems to ignore its use the clobber description. - edx is saved (pop/push) because it is reserved by GCC (REGPARM) and cannot be put in the clobber description. - line "mov (%%esp), %3 \n\t" has been removed because %3 is ecx and ecx is restored just after. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
This patch lets GCC to determine which registers to save when we switch to/from a VCPU in the case of intel x86_64. * Original code saves following registers: rax, rbx, rcx, rdx, rsi, rdi, rbp, r8, r9, r10, r11, r12, r13, r14, r15 * Patched code: - informs GCC that we modify following registers using the clobber description: rbx, rdi, rsi, r8, r9, r10, r11, r12, r13, r14, r15 - doesn't save rax because it is an output operand (vmx->fail) - cannot put rcx in clobber description because it is an input operand, but as we modify it and we want to keep its value (vcpu), we must save it (pop/push) - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber description. - rdx is saved (pop/push) because it is reserved by GCC (REGPARM) and cannot be put in the clobber description. - line "mov (%%rsp), %3 \n\t" has been removed because %3 is rcx and rcx is restored just after. - line ASM_VMX_VMWRITE_RSP_RDX() is moved out of the ifdef/else/endif Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Currently kvm has a wart in that it requires three extra pages for use as a tss when emulating real mode on Intel. This patch moves the allocation internally, only requiring userspace to tell us where in the physical address space we can place the tss. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Reserve a few memory slots for kernel internal use. This is good for case you have to register memory region and you want to be sure it was not registered from userspace, and for case you want to register a memory region that won't be seen from userspace. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Remove kvm memory slot allocation mechanism from the ioctl and put it to exported function. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
kvm_vm_ioctl_set_memory_region() is able to remove memory in addition to adding it. Therefore when using kernel swapping support for old userspaces, we need to munmap the memory if the user request to remove it Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Christian Borntraeger 提交于
Currently kvm provides hypercalls only for x86* architectures. To provide hypercall infrastructure for other kvm architectures I split kvm_para.h into a generic header file and architecture specific definitions. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Eddie Dong 提交于
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Eddie Dong 提交于
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This will help trap accesses to guest memory in atomic context. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Split guest reset code out of vmx_vcpu_setup(). Besides being cleaner, this moves the realmode tss setup (which can sleep) outside vmx_vcpu_setup() (which is executed with preemption enabled). [izik: remove unused variable] Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Zhang Xiantao 提交于
First step to split kvm_vcpu. Currently, we just use an macro to define the common fields in kvm_vcpu for all archs, and all archs need to define its own kvm_vcpu struct. Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Anthony Liguori 提交于
Allocate a userspace buffer for older userspaces. Also eliminate phys_mem buffer. The memset() in kvmctl really kills initial memory usage but swapping works even with old userspaces. A side effect is that maximum guest side is reduced for older userspace on i386. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Christian Borntraeger 提交于
ppc and s390 offer the possibility to track process times precisely by looking at cpu timer on every context switch, irq, softirq etc. We can use that infrastructure as well for guest time accounting. We need to account the used time before we change the state. This patch adds a call to account_system_vtime to kvm_guest_enter and kvm_guest exit. If CONFIG_VIRT_CPU_ACCOUNTING is not set, account_system_vtime is defined in hardirq.h as an empty function, which means this patch does not change the behaviour on other platforms. I compile tested this patch on x86 and function tested the patch on s390. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
This allows guest memory to be swapped. Pages which are currently mapped via shadow page tables are pinned into memory, but all other pages can be freely swapped. The patch makes gfn_to_page() elevate the page's reference count, and introduces kvm_release_page() that pairs with it. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
In case the page is not present in the guest memory map, return a dummy page the guest can scribble on. This simplifies error checking in its users. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
The current kvm mmu only reverse maps writable translation. This is used to write-protect a page in case it becomes a pagetable. But with swapping support, we need a reverse mapping of read-only pages as well: when we evict a page, we need to remove any mapping to it, whether writable or not. Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Nitin A Kamble 提交于
Instruction: cmc, clc, cli, sti opcodes: 0xf5, 0xf8, 0xfa, 0xfb respectively. [avi: fix reference to EFLG_IF which is not defined anywhere] Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Simplify the walker level loop not to carry so much information from one loop to the next. In addition to being complex, this made kmap_atomic() critical sections difficult to manage. As a result of this change, kmap_atomic() sections are limited to actually touching the guest pte, which allows the other functions called from the walker to do sleepy operations. This will happen when we enable swapping. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Nitin A Kamble 提交于
Instructions: inc r16/r32 (opcode 0x40-0x47) dec r16/r32 (opcode 0x48-0x4f) Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
We now have a new namespace, KVM_REQ_*, for bits in vcpu->requests. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Beside the obvious goodness of making code more common, this prevents a livelock with the next patch which moves interrupt injection out of the critical section. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
Add new-line at end of debug strings. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-