User space defines the model to emulate to a guest and should therefore
decide which addresses are used for both the virtual CPU interface
directly mapped in the guest physical address space and for the emulated
distributor interface, which is mapped in software by the in-kernel VGIC
support.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Wire the basic framework code for VGIC support and the initial in-kernel
MMIO support code for the VGIC, used for the distributor emulation.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When an interrupt occurs for the guest, it is sometimes necessary
to find out which vcpu was running at that point.

Keep track of which vcpu is being run in kvm_arch_vcpu_ioctl_run(),
and allow the data to be retrieved using either:
- kvm_arm_get_running_vcpu(): returns the vcpu running at this point
  on the current CPU. Can only be used in a non-preemptible context.
- kvm_arm_get_running_vcpus(): returns the per-CPU variable holding
  the running vcpus, usable for per-CPU interrupts.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

On ARM some bits are specific to the model being emulated for the guest and
user space needs a way to tell the kernel about those bits.  An example is mmio
device base addresses, where KVM must know the base address for a given device
to properly emulate mmio accesses within a certain address range or directly
map a device with virtualiation extensions into the guest address space.

We make this API ARM-specific as we haven't yet reached a consensus for a
generic API for all KVM architectures that will allow us to do something like
this.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Implement the PSCI specification (ARM DEN 0022A) to control
virtual CPUs being "powered" on or off.

PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability.

A virtual CPU can now be initialized in a "powered off" state,
using the KVM_ARM_VCPU_POWER_OFF feature flag.

The guest can use either SMC or HVC to execute a PSCI function.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>

When the guest accesses I/O memory this will create data abort
exceptions and they are handled by decoding the HSR information
(physical address, read/write, length, register) and forwarding reads
and writes to QEMU which performs the device emulation.

Certain classes of load/store operations do not support the syndrome
information provided in the HSR.  We don't support decoding these (patches
are available elsewhere), so we report an error to user space in this case.

This requires changing the general flow somewhat since new calls to run
the VCPU must check if there's a pending MMIO load and perform the write
after userspace has made the data available.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>

Adds a new important function in the main KVM/ARM code called
handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns
from guest execution. This function examines the Hyp-Syndrome-Register
(HSR), which contains information telling KVM what caused the exit from
the guest.

Some of the reasons for an exit are CP15 accesses, which are
not allowed from the guest and this commit handles these exits by
emulating the intended operation in software and skipping the guest
instruction.

Minor notes about the coproc register reset:
1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our
   table, at cost of 4 bytes per vcpu.

2) Added comments on the table indicating how we handle each register, for
   simplicity of understanding.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>

Provides complete world-switch implementation to switch to other guests
running in non-secure modes. Includes Hyp exception handlers that
capture necessary exception information and stores the information on
the VCPU and KVM structures.

The following Hyp-ABI is also documented in the code:

Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
   Switching to Hyp mode is done through a simple HVC #0 instruction. The
   exception vector code will check that the HVC comes from VMID==0 and if
   so will push the necessary state (SPSR, lr_usr) on the Hyp stack.
   - r0 contains a pointer to a HYP function
   - r1, r2, and r3 contain arguments to the above function.
   - The HYP function will be called with its arguments in r0, r1 and r2.
   On HYP function return, we return directly to SVC.

A call to a function executing in Hyp mode is performed like the following:

        <svc code>
        ldr     r0, =BSYM(my_hyp_fn)
        ldr     r1, =my_param
        hvc #0  ; Call my_hyp_fn(my_param) from HYP mode
        <svc code>

Otherwise, the world-switch is pretty straight-forward. All state that
can be modified by the guest is first backed up on the Hyp stack and the
VCPU values is loaded onto the hardware. State, which is not loaded, but
theoretically modifiable by the guest is protected through the
virtualiation features to generate a trap and cause software emulation.
Upon guest returns, all state is restored from hardware onto the VCPU
struct and the original state is restored from the Hyp-stack onto the
hardware.

SMP support using the VMPIDR calculated on the basis of the host MPIDR
and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier.

Reuse of VMIDs has been implemented by Antonios Motakis and adapated from
a separate patch into the appropriate patches introducing the
functionality. Note that the VMIDs are stored per VM as required by the ARM
architecture reference manual.

To support VFP/NEON we trap those instructions using the HPCTR. When
we trap, we switch the FPU.  After a guest exit, the VFP state is
returned to the host.  When disabling access to floating point
instructions, we also mask FPEXC_EN in order to avoid the guest
receiving Undefined instruction exceptions before we have a chance to
switch back the floating point state.  We are reusing vfp_hard_struct,
so we depend on VFPv3 being enabled in the host kernel, if not, we still
trap cp10 and cp11 in order to inject an undefined instruction exception
whenever the guest tries to use VFP/NEON. VFP/NEON developed by
Antionios Motakis and Rusty Russell.

Aborts that are permission faults, and not stage-1 page table walk, do
not report the faulting address in the HPFAR.  We have to resolve the
IPA, and store it just like the HPFAR register on the VCPU struct. If
the IPA cannot be resolved, it means another CPU is playing with the
page tables, and we simply restart the guest.  This quirk was fixed by
Marc Zyngier.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAntonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>

All interrupt injection is now based on the VM ioctl KVM_IRQ_LINE.  This
works semantically well for the GIC as we in fact raise/lower a line on
a machine component (the gic).  The IOCTL uses the follwing struct.

struct kvm_irq_level {
	union {
		__u32 irq;     /* GSI */
		__s32 status;  /* not used for KVM_IRQ_LEVEL */
	};
	__u32 level;           /* 0 or 1 */
};

ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip
(GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for
specific cpus.  The irq field is interpreted like this:

  bits:  | 31 ... 24 | 23  ... 16 | 15    ...    0 |
  field: | irq_type  | vcpu_index |   irq_number   |

The irq_type field has the following values:
- irq_type[0]: out-of-kernel GIC: irq_number 0 is IRQ, irq_number 1 is FIQ
- irq_type[1]: in-kernel GIC: SPI, irq_number between 32 and 1019 (incl.)
               (the vcpu_index field is ignored)
- irq_type[2]: in-kernel GIC: PPI, irq_number between 16 and 31 (incl.)

The irq_number thus corresponds to the irq ID in as in the GICv2 specs.

This is documented in Documentation/kvm/api.txt.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>

This commit introduces the framework for guest memory management
through the use of 2nd stage translation. Each VM has a pointer
to a level-1 table (the pgd field in struct kvm_arch) which is
used for the 2nd stage translations. Entries are added when handling
guest faults (later patch) and the table itself can be allocated and
freed through the following functions implemented in
arch/arm/kvm/arm_mmu.c:
 - kvm_alloc_stage2_pgd(struct kvm *kvm);
 - kvm_free_stage2_pgd(struct kvm *kvm);

Each entry in TLBs and caches are tagged with a VMID identifier in
addition to ASIDs. The VMIDs are assigned consecutively to VMs in the
order that VMs are executed, and caches and tlbs are invalidated when
the VMID space has been used to allow for more than 255 simultaenously
running guests.

The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is
freed in kvm_arch_destroy_vm(). Both functions are called from the main
KVM code.

We pre-allocate page table memory to be able to synchronize using a
spinlock and be called under rcu_read_lock from the MMU notifiers.  We
steal the mmu_memory_cache implementation from x86 and adapt for our
specific usage.

We support MMU notifiers (thanks to Marc Zyngier) through
kvm_unmap_hva and kvm_set_spte_hva.

Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA,
which is used by VGIC support to map the virtual CPU interface registers
to the guest. This support is added by Marc Zyngier.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>

Sets up KVM code to handle all exceptions taken to Hyp mode.

When the kernel is booted in Hyp mode, calling an hvc instruction with r0
pointing to the new vectors, the HVBAR is changed to the the vector pointers.
This allows subsystems (like KVM here) to execute code in Hyp-mode with the
MMU disabled.

We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from
the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to
point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode
to perform a world-switch into a KVM guest.

Also provides memory mapping code to map required code pages, data structures,
and I/O regions  accessed in Hyp mode at the same virtual address as the host
kernel virtual addresses, but which conforms to the architectural requirements
for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c
and comprises:
 - create_hyp_mappings(from, to);
 - create_hyp_io_mappings(from, to, phys_addr);
 - free_hyp_pmds();
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>

Targets KVM support for Cortex A-15 processors.

Contains all the framework components, make files, header files, some
tracing functionality, and basic user space API.

Only supported core is Cortex-A15 for now.

Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h.
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>