1. 31 10月, 2010 4 次提交
  2. 30 10月, 2010 6 次提交
    • C
      phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addr · 337ac9d5
      Cyril Chemparathy 提交于
      The marvell 88ec048's official part number is 88e1318s.  This patch renames
      definitions in the driver to reflect this.
      
      In addition, a minor bug fix has been added to write back the MSCR1 register
      value properly.
      Signed-off-by: NCyril Chemparathy <cyril@ti.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      337ac9d5
    • D
    • L
      b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd · 9f2a0fac
      Larry Finger 提交于
      On module removal, the sdio version of b43 generates the following warning:
      
      [  851.560519] ------------[ cut here ]------------
      [  851.560531] WARNING: at drivers/mmc/core/core.c:237 mmc_wait_for_cmd+0x88/0x90()
      [  851.560534] Hardware name: 20552PG
      [  851.560536] Modules linked in: b43(-) ssb mmc_block binfmt_misc rfcomm sco bnep ppdev l2cap ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp kvm_intel kvm arc4 iwlagn snd_hda_codec_conexant snd_hda_intel snd_hda_codec iwlcore snd_hwdep snd_pcm thinkpad_acpi mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq r852 joydev snd_timer sm_common pcmcia nand snd_seq_device cfg80211 sdhci_pci btusb psmouse tpm_tis yenta_socket nand_ids lp snd pcmcia_rsrc nand_ecc bluetooth sdhci tpm pcmcia_core parport mtd snd_page_alloc serio_raw tpm_bios soundcore nvram led_class sha256_generic aes_i586 aes_generic dm_crypt i915 drm_kms_helper drm ahci intel_agp i2c_algo_bit intel_gtt e1000e libahci video agpgart output
      [  851.560620] Pid: 2504, comm: rmmod Not tainted 2.6.36-titan0+ #1
      [  851.560622] Call Trace:
      [  851.560631]  [<c014a102>] warn_slowpath_common+0x72/0xa0
      [  851.560636]  [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
      [  851.560641]  [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
      [  851.560645]  [<c014a152>] warn_slowpath_null+0x22/0x30
      [  851.560649]  [<c04d94c8>] mmc_wait_for_cmd+0x88/0x90
      [  851.560655]  [<c0401585>] ? device_release+0x25/0x80
      [  851.560660]  [<c04df210>] mmc_io_rw_direct_host+0xa0/0x150
      [  851.560665]  [<c04df370>] mmc_io_rw_direct+0x30/0x40
      [  851.560669]  [<c04e06e7>] sdio_disable_func+0x37/0xa0
      [  851.560683]  [<f8dfcb80>] b43_sdio_remove+0x30/0x50 [b43]
      [  851.560687]  [<c04df8cc>] sdio_bus_remove+0x1c/0x60
      [  851.560692]  [<c016d39f>] ? blocking_notifier_call_chain+0x1f/0x30
      [  851.560697]  [<c0404991>] __device_release_driver+0x51/0xb0
      [  851.560701]  [<c0404a7f>] driver_detach+0x8f/0xa0
      [  851.560705]  [<c0403c83>] bus_remove_driver+0x63/0xa0
      [  851.560709]  [<c0405039>] driver_unregister+0x49/0x80
      [  851.560713]  [<c0405039>] ? driver_unregister+0x49/0x80
      [  851.560718]  [<c04dfad7>] sdio_unregister_driver+0x17/0x20
      [  851.560727]  [<f8dfcb42>] b43_sdio_exit+0x12/0x20 [b43]
      [  851.560734]  [<f8dfe76f>] b43_exit+0x17/0x3c [b43]
      [  851.560740]  [<c017fb8d>] sys_delete_module+0x13d/0x200
      [  851.560747]  [<c01fd7d2>] ? do_munmap+0x212/0x300
      [  851.560752]  [<c010311f>] sysenter_do_call+0x12/0x28
      [  851.560757] ---[ end trace 31e14488072d2f7d ]---
      [  851.560759] ------------[ cut here ]------------
      
      The warning is caused by b43 not claiming the device before calling
      sdio_disable_func().
      Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
      Reported-by: NArnd Hannemann <arnd@arndnet.de>
      Tested-by: NArnd Hannemann <arnd@arndnet.de>
      Cc: Stable <stable@kernel.org>
      Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      9f2a0fac
    • J
      mac80211: fix failure to check kmalloc return value in key_key_read · 520efd1a
      Jesper Juhl 提交于
      I noticed two small issues in mac80211/debugfs_key.c::key_key_read while
      reading through the code. Patch below.
      
      The key_key_read() function returns ssize_t and the value that's actually
      returned is the return value of simple_read_from_buffer() which also
      returns ssize_t, so let's hold the return value in a ssize_t local
      variable rather than a int one.
      
      Also, memory is allocated dynamically with kmalloc() which can fail, but
      the return value of kmalloc() is not checked, so we may end up operating
      on a null pointer further on. So check for a NULL return and bail out with
      -ENOMEM in that case.
      Signed-off-by: NJesper Juhl <jj@chaosbits.net>
      Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      520efd1a
    • P
      libertas: Fix sd8686 firmware reload · 731b2034
      Paul Fox 提交于
      For the SD8686, we cannot rely on the scratch register to read the firmware
      load status, because the same register is used for storing RX packet length.
      Broaden the check to account for this.
      
      The module can now be unloaded/reloaded successfully.
      
      Based on the implementation from libertas_tf.
      Signed-off-by: NDaniel Drake <dsd@laptop.org>
      Acked-by: NDan Williams <dcbw@redhat.com>
      Signed-off-by: NSteve deRosier <steve@cozybit.com>
      Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      731b2034
    • M
      ath9k: Fix incorrect access of rate flags in RC · 4fc4fbd1
      Mohammed Shafi Shajakhan 提交于
      The index variable to access the rate flags should be obtained from the
      inner loop counter which corresponds to the rate table structure.This
      fixes the invalid rate selection i.e when the supported basic rate is
      invalid on a particular band and also the following warning message.
      Thanks to Raj for finding this out.
      
      Call Trace:
      
       [<ffffffff8104ee4a>] warn_slowpath_common+0x7a/0xb0
      
       [<ffffffff8104ee95>] warn_slowpath_null+0x15/0x20
      
       [<ffffffffa0583c45>] ath_get_rate+0x595/0x5b0 [ath9k]
      
       [<ffffffff811a0636>] ? cpumask_next_and+0x36/0x50
      
       [<ffffffffa0405186>] rate_control_get_rate+0x86/0x160 [mac80211]
      
       [<ffffffffa040dfac>] invoke_tx_handlers+0x81c/0x12d0 [mac80211]
      
       [<ffffffffa040eae9>] ieee80211_tx+0x89/0x2b0 [mac80211]
      
       [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0
      
       [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]
      
       [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]
      
       [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]
      
       [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
      [mac80211]
      
       [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0
      
       [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]
      
       [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]
      
       [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]
      
       [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
      [mac80211]
      
       [<ffffffffa03f8896>] ieee80211_scan_work+0x146/0x600 [mac80211]
      
       [<ffffffff8133a375>] ? schedule+0x2f5/0x8e0
      
       [<ffffffffa03f8750>] ? ieee80211_scan_work+0x0/0x600 [mac80211]
      
       [<ffffffff81064fcf>] process_one_work+0x10f/0x380
      
       [<ffffffff81066bc2>] worker_thread+0x162/0x340
      
       [<ffffffff81066a60>] ? worker_thread+0x0/0x340
      
      Cc: stable@kernel.org
      Signed-off-by: NMohammed Shafi Shajakhan <mshajakhan@atheros.com>
      Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      4fc4fbd1
  3. 29 10月, 2010 21 次提交
    • D
      netfilter: xt_socket: Make tproto signed in socket_mt6_v1(). · 089282fb
      David S. Miller 提交于
      Otherwise error indications from ipv6_find_hdr() won't be noticed.
      
      This required making the protocol argument to extract_icmp6_fields()
      signed too.
      Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      089282fb
    • A
      stmmac: enable/disable rx/tx in the core with a single write. · 19449bfc
      avisconti 提交于
      This patch enables and disables the rx and tx bits in the MAC control reg
      by using a single write operation.
      This also solves a possible problem (spotted on SPEAr platforms) at 10Mbps
      where two consecutive writes to a MAC control register can take more than
      4 phy_clk cycles.
      Signed-off-by: NArmando Visconti <armando.visconti@st.com>
      Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      19449bfc
    • G
      net: atarilance - flags should be unsigned long · d1abc9a9
      Geert Uytterhoeven 提交于
      drivers/net/atarilance.c: In function ‘addr_accessible’:
      drivers/net/atarilance.c:413: warning: comparison of distinct pointer types lacks a cast
      drivers/net/atarilance.c:450: warning: comparison of distinct pointer types lacks a cast
      Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d1abc9a9
    • R
      netxen: fix kdump · 683b65f8
      Rajesh Borundia 提交于
      Reset the whole hw instead of freeing hw resources
      consumed by each pci function.
      Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
      Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      683b65f8
    • N
      pktgen: Limit how much data we copy onto the stack. · 448d7b5d
      Nelson Elhage 提交于
      A program that accidentally writes too much data to the pktgen file can overflow
      the kernel stack and oops the machine. This is only triggerable by root, so
      there's no security issue, but it's still an unfortunate bug.
      
      printk() won't print more than 1024 bytes in a single call, anyways, so let's
      just never copy more than that much data. We're on a fairly shallow stack, so
      that should be safe even with CONFIG_4KSTACKS.
      Signed-off-by: NNelson Elhage <nelhage@ksplice.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      448d7b5d
    • D
      net: Limit socket I/O iovec total length to INT_MAX. · 8acfe468
      David S. Miller 提交于
      This helps protect us from overflow issues down in the
      individual protocol sendmsg/recvmsg handlers.  Once
      we hit INT_MAX we truncate out the rest of the iovec
      by setting the iov_len members to zero.
      
      This works because:
      
      1) For SOCK_STREAM and SOCK_SEQPACKET sockets, partial
         writes are allowed and the application will just continue
         with another write to send the rest of the data.
      
      2) For datagram oriented sockets, where there must be a
         one-to-one correspondance between write() calls and
         packets on the wire, INT_MAX is going to be far larger
         than the packet size limit the protocol is going to
         check for and signal with -EMSGSIZE.
      
      Based upon a patch by Linus Torvalds.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8acfe468
    • D
      USB: gadget: fix ethernet gadget crash in gether_setup · 349f6c5c
      Dmitry Artamonow 提交于
      Crash is triggered by commit e6484930 ("net: allocate tx queues in
      register_netdevice"), which moved tx netqueue creation into register_netdev.
      So now calling netif_stop_queue() before register_netdev causes an oops.
      Move netif_stop_queue() after net device registration to fix crash.
      Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      349f6c5c
    • P
      fib: Fix fib zone and its hash leak on namespace stop · 4aa2c466
      Pavel Emelyanov 提交于
      When we stop a namespace we flush the table and free one, but the
      added fn_zone-s (and their hashes if grown) are leaked. Need to free.
      Tries releases all its stuff in the flushing code.
      
      Shame on us - this bug exists since the very first make-fib-per-net
      patches in 2.6.27 :(
      Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4aa2c466
    • K
      cxgb3: Fix panic in free_tx_desc() · b1424ed9
      Krishna Kumar 提交于
      I got a few of these panics (on 2.6.36-rc7) when running high
      number of netperf sessions:
      
      BUG: unable to handle kernel paging request at 0000100000000000
      IP: [<ffffffff813125f0>] skb_release_data+0xa0/0xd0
      Oops: 0000 [#1] SMP
      Pid: 2155, comm: vhost-2115 Not tainted 2.6.36-rc7-ORG #1 49Y6512     /System x3650 M2 -[7947AC1]-
      RIP: 0010:[<ffffffff813125f0>]  [<ffffffff813125f0>] skb_release_data+0xa0/0xd0
      RSP: 0018:ffff880001803738  EFLAGS: 00010206
      RAX: ffff880179b0fc00 RBX: ffff880178b441c0 RCX: 0000000000000000
      RSP: 0018:ffff880001803738  EFLAGS: 00010206
      RAX: ffff880179b0fc00 RBX: ffff880178b441c0 RCX: 0000000000000000
      RDX: ffff880179b0fd40 RSI: 0000000000000000 RDI: 0000100000000000
      RBP: ffff880001803748 R08: 0000000000000001 R09: ffff88017f117000
      R10: ffff88017b990608 R11: ffff88017f117090 R12: ffff880178b441c0
      R13: ffff88017f117090 R14: 0000000000000000 R15: ffff880178b441c0
      FS:  0000000000000000(0000) GS:ffff880001800000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      CR2: 0000100000000000 CR3: 000000017ea64000 CR4: 00000000000026e0
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
      Process vhost-2115 (pid: 2155, threadinfo ffff88017d872000, task ffff88017e954680)
      Stack:
      ffff880178b441c0 0000000000000007 ffff880001803768 ffffffff81312119
      <0> 0000000000000000 0000000000000002 ffff880001803778 ffffffff813121f9
      <0> ffff880001803818 ffffffffa012d14c ffffffffa02de076 ffff880001803700
      Call Trace:
      <IRQ>
      [<ffffffff81312119>] __kfree_skb+0x19/0xa0
      [<ffffffff813121f9>] kfree_skb+0x19/0x40
      [<ffffffffa012d14c>] free_tx_desc+0x2fc/0x350 [cxgb3]
      [<ffffffffa02de076>] ? vhost_poll_wakeup+0x16/0x20 [vhost_net]
      [<ffffffffa01323db>] t3_eth_xmit+0x28b/0x380 [cxgb3]
      [<ffffffff8131ce47>] dev_hard_start_xmit+0x377/0x5a0
      [<ffffffff81335a4a>] sch_direct_xmit+0xfa/0x1d0
      [<ffffffff8131d1a9>] dev_queue_xmit+0x139/0x450
      [<ffffffff81326225>] neigh_resolve_output+0x125/0x340
      [<ffffffff8135a77c>] ip_finish_output+0x14c/0x320
      [<ffffffff8135a9fe>] ip_output+0xae/0xc0
      [<ffffffff8135620f>] ip_forward_finish+0x3f/0x50
      [<ffffffff8135641f>] ip_forward+0x1ff/0x400
      [<ffffffff81354789>] ip_rcv_finish+0x119/0x3e0
      [<ffffffff81354c7d>] ip_rcv+0x22d/0x300
      [<ffffffff8131a95b>] __netif_receive_skb+0x29b/0x570
      [<ffffffff8131ba70>] ? netif_receive_skb+0x0/0x80
      [<ffffffff8131bae8>] netif_receive_skb+0x78/0x80
      [<ffffffffa02a96d8>] br_handle_frame_finish+0x198/0x260 [bridge]
      [<ffffffffa02aebc8>] br_nf_pre_routing_finish+0x238/0x380 [bridge]
      [<ffffffff813424bc>] ? nf_hook_slow+0x6c/0x100
      [<ffffffffa02ae990>] ? br_nf_pre_routing_finish+0x0/0x380 [bridge]
      [<ffffffffa02afb08>] br_nf_pre_routing+0x698/0x7a0 [bridge]
      [<ffffffff81342414>] nf_iterate+0x64/0xa0
      [<ffffffffa02a9540>] ? br_handle_frame_finish+0x0/0x260 [bridge]
      [<ffffffff813424bc>] nf_hook_slow+0x6c/0x100
      [<ffffffffa02a9540>] ? br_handle_frame_finish+0x0/0x260 [bridge]
      [<ffffffffa02a9931>] br_handle_frame+0x191/0x240 [bridge]
      [<ffffffffa02a97a0>] ? br_handle_frame+0x0/0x240 [bridge]
      [<ffffffff8131a863>] __netif_receive_skb+0x1a3/0x570
      [<ffffffff812ef3f6>] ? dma_issue_pending_all+0x76/0xa0
      [<ffffffff8131ad32>] process_backlog+0x102/0x200
      [<ffffffff8131c2d0>] net_rx_action+0x100/0x220
      [<ffffffff810548ef>] __do_softirq+0xaf/0x140
      [<ffffffff8100bcdc>] call_softirq+0x1c/0x30
      [<ffffffff8100dfc5>] ? do_softirq+0x65/0xa0
      [<ffffffff8131c6b8>] netif_rx_ni+0x28/0x30
      [<ffffffffa02c305d>] tun_sendmsg+0x2cd/0x4b0 [tun]
      [<ffffffffa02e01af>] handle_tx+0x1df/0x340 [vhost_net]
      [<ffffffffa02e0340>] handle_tx_kick+0x10/0x20 [vhost_net]
      [<ffffffffa02de29b>] vhost_worker+0xbb/0x130 [vhost_net]
      [<ffffffffa02de1e0>] ? vhost_worker+0x0/0x130 [vhost_net]
      [<ffffffffa02de1e0>] ? vhost_worker+0x0/0x130 [vhost_net]
      [<ffffffff81069686>] kthread+0x96/0xa0
      [<ffffffff8100bbe4>] kernel_thread_helper+0x4/0x10
      [<ffffffff810695f0>] ? kthread+0x0/0xa0
      [<ffffffff8100bbe0>] ? kernel_thread_helper+0x0/0x10
      Code: 8b 94 24 d0 00 00 00 49 8b 84 24 d8 00 00 00 48 8d 14 10 0f b7 0a 39 d9 7f d1 48 8b 7a 10 48 85 ff 74 20 48 c7 42 10 00 00 00 00 <48> 8b 1f e8 e8 fb ff ff 48 85 db 48 89 df 75 f0 49 8b 84 24 d8
      
      Patch below fixes the panic. cxgb4 and cxgb4vf already have this fix.
      Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b1424ed9
    • N
      cxgb3: fix crash due to manipulating queues before registration · 69dcfc8a
      Nishanth Aravamudan 提交于
      Along the same lines as "cxgb4: fix crash due to manipulating queues
      before registration" (8f6d9f40), before
      commit "net: allocate tx queues in register_netdevice"
      netif_tx_stop_all_queues and related functions could be used between
      device allocation and registration but now only after registration.
      cxgb4 has such a call before registration and crashes now.  Move it
      after register_netdev.
      Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
      Cc: eric.dumazet@gmail.com
      Cc: sonnyrao@us.ibm.com
      Cc: Divy Le Ray <divy@chelsio.com>
      Cc: Dimitris Michailidis <dm@chelsio.com>
      Cc: netdev@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Tested-by: NNishanth Aravamudan <nacc@us.ibm.com>
      Acked-by: NDivy Le Ray <divy@chelsio.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      69dcfc8a
    • P
      8390: Don't oops on starting dev queue · b7126d8c
      Pavel Emelyanov 提交于
      The __NS8390_init tries to start the device queue before the
      device is registered. This results in an oops (snipped):
      
      [    2.865493] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
      [    2.866106] IP: [<ffffffffa000602a>] netif_start_queue+0xb/0x12 [8390]
      [    2.881267] Call Trace:
      [    2.881437]  [<ffffffffa000624d>] __NS8390_init+0x102/0x15a [8390]
      [    2.881999]  [<ffffffffa00062ae>] NS8390_init+0x9/0xb [8390]
      [    2.882237]  [<ffffffffa000d820>] ne2k_pci_init_one+0x297/0x354 [ne2k_pci]
      [    2.882955]  [<ffffffff811c7a0e>] local_pci_probe+0x12/0x16
      [    2.883308]  [<ffffffff811c85ad>] pci_device_probe+0xc3/0xef
      [    2.884049]  [<ffffffff8129218d>] driver_probe_device+0xbe/0x14b
      [    2.884937]  [<ffffffff81292260>] __driver_attach+0x46/0x62
      [    2.885170]  [<ffffffff81291788>] bus_for_each_dev+0x49/0x78
      [    2.885781]  [<ffffffff81291fbb>] driver_attach+0x1c/0x1e
      [    2.886089]  [<ffffffff812912ab>] bus_add_driver+0xba/0x227
      [    2.886330]  [<ffffffff8129259a>] driver_register+0x9e/0x115
      [    2.886933]  [<ffffffff811c8815>] __pci_register_driver+0x50/0xac
      [    2.887785]  [<ffffffffa001102c>] ne2k_pci_init+0x2c/0x2e [ne2k_pci]
      [    2.888093]  [<ffffffff81000212>] do_one_initcall+0x7c/0x130
      [    2.888693]  [<ffffffff8106d74f>] sys_init_module+0x99/0x1da
      [    2.888946]  [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b
      
      This happens because the netif_start_queue sets respective bit on the dev->_tx
      array which is not yet allocated.
      
      As far as I understand the code removing the netif_start_queue from __NS8390_init
      is OK, since queue will be started later on device open. Plz, correct me if I'm wrong.
      
      Found in the Dave's current tree, so he's in Cc.
      Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b7126d8c
    • G
      dccp ccid-2: Stop polling · 1c0e0a05
      Gerrit Renker 提交于
      This updates CCID-2 to use the CCID dequeuing mechanism, converting from
      previous continuous-polling to a now event-driven mechanism.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1c0e0a05
    • G
      dccp: Refine the wait-for-ccid mechanism · b1fcf55e
      Gerrit Renker 提交于
      This extends the existing wait-for-ccid routine so that it may be used with
      different types of CCID, addressing the following problems:
      
       1) The queue-drain mechanism only works with rate-based CCIDs. If CCID-2 for
          example has a full TX queue and becomes network-limited just as the
          application wants to close, then waiting for CCID-2 to become unblocked
          could lead to an indefinite  delay (i.e., application "hangs").
       2) Since each TX CCID in turn uses a feedback mechanism, there may be changes
          in its sending policy while the queue is being drained. This can lead to
          further delays during which the application will not be able to terminate.
       3) The minimum wait time for CCID-3/4 can be expected to be the queue length
          times the current inter-packet delay. For example if tx_qlen=100 and a delay
          of 15 ms is used for each packet, then the application would have to wait
          for a minimum of 1.5 seconds before being allowed to exit.
       4) There is no way for the user/application to control this behaviour. It would
          be good to use the timeout argument of dccp_close() as an upper bound. Then
          the maximum time that an application is willing to wait for its CCIDs to can
          be set via the SO_LINGER option.
      
      These problems are addressed by giving the CCID a grace period of up to the
      `timeout' value.
      
      The wait-for-ccid function is, as before, used when the application
       (a) has read all the data in its receive buffer and
       (b) if SO_LINGER was set with a non-zero linger time, or
       (c) the socket is either in the OPEN (active close) or in the PASSIVE_CLOSEREQ
           state (client application closes after receiving CloseReq).
      
      In addition, there is a catch-all case of __skb_queue_purge() after waiting for
      the CCID. This is necessary since the write queue may still have data when
       (a) the host has been passively-closed,
       (b) abnormal termination (unread data, zero linger time),
       (c) wait-for-ccid could not finish within the given time limit.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b1fcf55e
    • G
      dccp: Extend CCID packet dequeueing interface · dc841e30
      Gerrit Renker 提交于
      This extends the packet dequeuing interface of dccp_write_xmit() to allow
       1. CCIDs to take care of timing when the next packet may be sent;
       2. delayed sending (as before, with an inter-packet gap up to 65.535 seconds).
      
      The main purpose is to take CCID-2 out of its polling mode (when it is network-
      limited, it tries every millisecond to send, without interruption).
      
      The mode of operation for (2) is as follows:
       * new packet is enqueued via dccp_sendmsg() => dccp_write_xmit(),
       * ccid_hc_tx_send_packet() detects that it may not send (e.g. window full),
       * it signals this condition via `CCID_PACKET_WILL_DEQUEUE_LATER',
       * dccp_write_xmit() returns without further action;
       * after some time the wait-condition for CCID becomes true,
       * that CCID schedules the tasklet,
       * tasklet function calls ccid_hc_tx_send_packet() via dccp_write_xmit(),
       * since the wait-condition is now true, ccid_hc_tx_packet() returns "send now",
       * packet is sent, and possibly more (since dccp_write_xmit() loops).
      
      Code reuse: the taskled function calls dccp_write_xmit(), the timer function
                  reduces to a wrapper around the same code.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      dc841e30
    • G
      dccp: Return-value convention of hc_tx_send_packet() · fe84f414
      Gerrit Renker 提交于
      This patch reorganises the return value convention of the CCID TX sending
      function, to permit more flexible schemes, as required by subsequent patches.
      
      Currently the convention is
       * values < 0     mean error,
       * a value == 0   means "send now", and
       * a value x > 0  means "send in x milliseconds".
      
      The patch provides symbolic constants and a function to interpret return values.
      
      In addition, it caps the maximum positive return value to 0xFFFF milliseconds,
      corresponding to 65.535 seconds.  This is possible since in CCID-3/4 the
      maximum possible inter-packet gap is fixed at t_mbi = 64 sec.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fe84f414
    • E
      igbvf: fix panic on load · de7fe787
      Emil Tantilov 提交于
      Introduced by commit:e6484930
      net: allocate tx queues in register_netdevice
      Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
      Acked-by: NGreg Rose <greg.v.rose@intel.com>
      Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
      Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      de7fe787
    • E
      ixgb: call pci_disable_device in ixgb_remove · ec43a81c
      Emil Tantilov 提交于
      ixgb fails to work after reload on recent kernels:
      
      rmmod ixgb (dev->current_state = PCI_UNKNOWN)
      modprobe ixgb (pci_enable_device will bail leaving current_state to PCI_UNKNOWN)
      ifup eth0
      do_IRQ: 2.82 No irq handler for vector (irq -1)
      
      The issue was exposed by commit fcd097f3
      PCI: MSI: Remove unsafe and unnecessary hardware access
      
      which avoids HW writes for power states != PCI_D0
      
      CC: Ben Hutchings <bhutchings@solarflare.com>
      Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
      Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
      Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ec43a81c
    • J
      ixgbe: DCB, fix TX hang occurring in stress condition with PFC · 9806307a
      John Fastabend 提交于
      The DCB credits refill quantum _must_ be greater than half the max
      packet size. This is needed to guarantee that TX DMA operations
      are not attempted during a pause state. Additionally, the min IFG
      must be set correctly for DCB mode. If a DMA operation is
      requested unexpectedly during the pause state the HW data
      store may be corrupted leading to a DMA hang.  The DMA hang
      requires a reset to correct. This fixes the HW configuration
      to avoid this condition.
      Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
      Tested-by: NRoss Brattain <ross.b.brattain@intel.com>
      Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9806307a
    • C
      e1000e: Add check for reset flags before displaying reset message · affa9dfb
      Carolyn Wyborny 提交于
      Some parts need to execute resets during normal operation.  This flag
      check ensures that those parts reset without needlessly alarming the
      user.  Other unexpected resets by other parts will dump debug info
      and message the reset action to the user, as originally intended.
      Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
      Acked-by: NBruce Allan <bruce.w.allan@intel.com>
      Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com>
      Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      affa9dfb
    • C
      e1000e: reset PHY after errors detected · ff10e13c
      Carolyn Wyborny 提交于
      Some errors can be induced in the PHY via environmental testing
      (specifically extreme temperature changes and electro static
      discharge testing), and in the case of the PHY hanging due to
      this input, this detects the problem and resets to continue.
      This issue only applies to 82574 silicon.
      Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
      Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
      Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com>
      Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ff10e13c
    • D
      pch_gbe: Select MII. · 116c1ea0
      David S. Miller 提交于
      Reported-by: NSteven Rostedt <rostedt@goodmis.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      116c1ea0
  4. 28 10月, 2010 9 次提交