- 16 8月, 2008 4 次提交
-
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: cancel check/repair requests when recovery is needed Allow raid10 resync to happening in larger chunks. Allow faulty devices to be removed from a readonly array. Don't let a blocked_rdev interfere with read request in raid5/6 Fail safely when trying to grow an array with a write-intent bitmap. Restore force switch of md array to readonly at reboot time. Make writes to md/safe_mode_delay immediately effective.
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xilinx_ps2 - fix warning Input: bcm5974 - implement autosuspend support Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads Input: paper over a bug in Synaptics X driver Input: evdev - split EVIOCGBIT handlig into a separate function Input: i8042 - Add Dritek quirk for Acer TravelMate 4280 Input: xpad - add Pelican Eclipse D-Pad to the list of devices Input: gpio-keys - make gpio_keys_device_driver static Input: gpio-keys - fix possible NULL pointer dereference Input: wm97xx - enable sub-drivers by default
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6: ACPI: Fix thermal shutdowns ACPI: bounds check IRQ to prevent memory corruption ACPI: Avoid bogus EC timeout when EC is in Polling mode ACPI : Add the EC dmi table to fix the incorrect ECDT table ACPI: Properly clear flags on false-positives and send uevent on sudden unplug acpi: trivial cleanups acer-wmi: Fix wireless and bluetooth on early AMW0 v2 laptops ACPI: WMI: Set instance for query block calls ACPICA: Additional error checking for pathname utilities ACPICA: Fix possible memory leak in Unload() operator ACPICA: Fix memory leak when deleting thermal/processor objects
-
由 Linus Torvalds 提交于
Sam Ravnborg did the build-test that the direct header file move works, I'm just committing it. This is a pure move: mkdir arch/alpha/include git mv include/asm-alpha arch/alpha/include/asm with no other changes. Requested-and-tested-by: NSam Ravnborg <sam@ravnborg.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 8月, 2008 36 次提交
-
-
由 Bob Copeland 提交于
A fuzzed fileystem image failed with OMFS when the extent count was used in a loop without being checked against the max number of extents. It also provoked a signed division for an array index that was checked as if unsigned, leading to index by -1. omfsck will be updated to fix these cases, in the meantime bail out gracefully. Reported-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bob Copeland 提交于
Testing with a modified fsfuzzer reveals a couple of locations in omfs where filesystem variables are ultimately used as loop counters with insufficient sanity checking. In this case, dir->i_size is used to compute the number of buckets in the directory hash. If too large, readdir will overrun a buffer. Since it's an invariant that dir->i_size is equal to the sysblock size, and we already sanity check that, just use that value instead. This fixes the following oops: BUG: unable to handle kernel paging request at c978e004 IP: [<c032298e>] omfs_readdir+0x18e/0x32f Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: Pid: 4796, comm: ls Not tainted (2.6.27-rc2 #12) EIP: 0060:[<c032298e>] EFLAGS: 00010287 CPU: 0 EIP is at omfs_readdir+0x18e/0x32f EAX: c978d000 EBX: 00000000 ECX: cbfcfaf8 EDX: cb2cf100 ESI: 00001000 EDI: 00000800 EBP: cb2d3f68 ESP: cb2d3f0c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process ls (pid: 4796, ti=cb2d3000 task=cb175f40 task.ti=cb2d3000) Stack: 00000002 00000000 00000000 c018a820 cb2d3f94 cb2cf100 cbfb0000 ffffff10 cbfb3b80 cbfcfaf8 000001c9 00000a09 00000000 00000000 00000000 cbfcfbc8 c9697000 cbfb3b80 22222222 00001000 c08e6cd0 cb2cf100 cbfb3b80 cb2d3f88 Call Trace: [<c018a820>] ? filldir64+0x0/0xcd [<c018a9f2>] ? vfs_readdir+0x56/0x82 [<c018a820>] ? filldir64+0x0/0xcd [<c018aa7c>] ? sys_getdents64+0x5e/0xa0 [<c01038bd>] ? sysenter_do_call+0x12/0x31 ======================= Code: 00 89 f0 89 f3 0f ac f8 14 81 e3 ff ff 0f 00 48 8d 14 c5 b8 01 00 00 89 45 cc 89 55 f0 e9 8c 01 00 00 8b 4d c8 8b 75 f0 8b 41 18 <8b> 54 30 04 8b 04 30 31 f6 89 5d dc 89 d1 8b 55 b8 0f c8 0f c9 Reported-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Chinner 提交于
m68k fails to build with these functions inlined in completion.h. Move them out of line into sched.c and export them to avoid this problem. Signed-off-by: NDave Chinner <david@fromorbit.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
When reviewing a recent patch I noticed a potential trouble spot in the registration of new SPI devices. The SPI master driver is told to set the device up before adding it to the driver model, so that it's always properly set up when probe() is called. (This is important, because in the case of inverted chipselects, this device can make the bus misbehave until it's properly deselected. It's got to be set up even if no driver binds to the device.) The trouble spot is that it doesn't first verify that no other device has been added using that chipselect. If such a device has been added, its configuration gets trashed. (Fortunately this has not been a common error!) The fix here adds an explicit check, and a mutex to protect the relevant critical region. [akpm@linux-foundation.org: make the lock local to spi_add_device()] Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Mason 提交于
write_cache_pages() uses i_mapping->writeback_index to pick up where it left off the last time a given inode was found by pdflush or balance_dirty_pages (or anyone else who sets wbc->range_cyclic) alloc_inode() should set it to a sane value so that writeback doesn't start in the middle of a file. It is somewhat difficult to notice the bug since write_cache_pages will loop around to the start of the file and the elevator helps hide the resulting seeks. For whatever reason, Btrfs hits this often. Unpatched, untarring 30 copies of the linux kernel in series runs at 47MB/s on a single sata drive. With this fix, it jumps to 62MB/s. Signed-off-by: NChris Mason <chris.mason@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jack Steiner 提交于
Add MAINTAINERS for GRU, XPNET, XPC and XP drivers. Signed-off-by: NJack Steiner <steiner@sgi.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
Add in the CPUID for Nehalem chips. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Kent Liu <kent.liu@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
Currently, all sensors are read when the energy meter is queried via sysfs. This introduces a considerable amount of delay and variation in the sysfs reading, which is not desirable when trying to profile energy use. Therefore, read only the energy meters when a sysfs query comes in for them, and don't cache the results so that we always get the latest reading. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
On older machines, probing for a nonexistent AEM interface returned an IPMI error; when we saw this, we'd stop probing. On the x3650 M2 and (presumably) later, we are returned a value indicating success and a buffer full of garbage or zeroes. This causes the probe function to run in an infinite loop. To fix this, we add one last check--if the interface number we're looking for is higher than the number of interfaces that AEM claims to have, stop probing. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
Minor documentation update to reflect the current full name of the power management hardware interface and reflows the text a bit. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alistair John Strachan 提交于
Previously the driver was only using DMI to prevent smbus probing on non-Abit motherboards. However, since the manual probing method is brittle and prone to failure on some Abit motherboards (esp. the Abit IP35 Pro) it is better to use DMI to also read the board name and then decide whether or not to probe the bus. At the moment, we do not have a list of valid DMI name strings to use for existing and supported motherboards. This patch only implements DMI probing for the IP35 Pro. For motherboards that can not yet use DMI probing, a warning will be printed to the kernel log asking those users to email me their dmidecode output. The existing manual probing mechanism will be used if CONFIG_DMI is not enabled, if DMI probing fails (for DMI-unsupported motherboards), or if DMI probing fails and the "force" option is set (for DMI-supported motherboards). Ideally in the longer term this manual probing method would be removed. This patch should be safe to apply as it does not change the probing behaviour for most of the supported motherboards, just the IP35 Pro, which already has regressions filed against it in 2.6.26. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11212Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alistair John Strachan 提交于
Hans passed maintainership of the abituguru3 hwmon driver onto me. Add a new entry to the MAINTAINERS file for the abituguru3 driver and assign it to me. Also update the existing UGURU entry to indicate that Hans is only responsible for the abituguru driver. Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
Export the sensor -> channel/dimm mapping in tempX_label. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marc Pignat 提交于
SPI driver for analog to digital converters national semiconductor ADC081S101, ADC124S501, ... Code for 8 channels by Tobias Himmer. This driver adds support for National Semiconductor ADC<bb><c>S<sss> chip family, where: * bb is the resolution in number of bits (8, 10, 12) * c is the number of channels (1, 2, 4, 8) * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS and 101 for 1 MSPS) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch> Cc: Tobias Himmer <tobias@himmer-online.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Borisov 提交于
drivers/hwmon/w83791d.c: In function `w83791d_probe': drivers/hwmon/w83791d.c:1049: warning: unused variable `val1' Signed-off-by: NMichael Borisov <niro@tut.by> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Guilherme M. Schroeder 提交于
Add support for Macbook v3 (sensors and accelerometer). Signed-off-by: NNicolas Boichat <nicolas@boichat.ch> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roberto De Ioris 提交于
This adds support for fans and temperature sensors on intel iMac. Tested on iMac 24" 2.8ghz (iMac8,1), it supports the following sensors: cpu A ambient gpu gpu diode gpu heatsink hd bay 1 memory controller optical drive power Signed-off-by: NRoberto De Ioris <roberto@unbit.it> Cc: Nicolas Boichat <nicolas@boichat.ch> Cc: Jean Delvare <khali@linux-fr.org> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 York Sun 提交于
AOI position cannot be negative. Signed-off-by: NYork Sun <yorksun@freescale.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 York Sun 提交于
Application can now have the virtual resoltuion and use FBIOPAN_DISPLAY ioctl to pan. Signed-off-by: NYork Sun <yorksun@freescale.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Functionally the same, but more conventional. Cc: Huang Ying <ying.huang@intel.com> Tested-by: NVivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
Ftrace depends on some processor state that we destroyed during kexec and restored by restore_processor_state(). So save_processor_state() and restore_processor_state() are moved into machine_kexec() and ftrace is restored after restore_processor_state(). Signed-off-by: NHuang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
Add __ftrace_enabled_save/restore, used to disable ftrace for a while. Now, this is used by kexec jump, which need a version without lock, for general situation, a locked version should be used. Signed-off-by: NHuang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
Add device_pm_lock() and device_pm_unlock() in kernel_kexec() in sync with current hibernation implementation. Signed-off-by: NHuang Ying <ying.huang@intel.com> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
Call kernel_restart_prepare() in kernel_kexec() instead of duplicating the code. Signed-off-by: NHuang Ying <ying.huang@intel.com> Acked-by: NPavel Machek <pavel@suse.cz> Acked-by: NVivek Goyal <vgoyal@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
Kexec/Kexec-jump require code size in control page is less than PAGE_SIZE/2. This patch add link-time checking for this. ASSERT() of ld link script is used as the link-time checking mechanism. [akpm@linux-foundation.org: build fix] Signed-off-by: NHuang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NVivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
Rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZE, because control page is used for not only code on some platform. For example in kexec jump, it is used for data and stack too. [akpm@linux-foundation.org: unbreak powerpc and arm, finish conversion] Signed-off-by: NHuang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
Move if (kexec_image->preserve_context) { ... } into #ifdef CONFIG_KEXEC_JUMP to make code looks cleaner. Fix no longer correct comments of kernel_kexec(). Signed-off-by: NHuang Ying <ying.huang@intel.com> Acked-by: NVivek Goyal <vgoyal@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
kernel/kexec.c: In function 'kernel_kexec': kernel/kexec.c:1506: warning: value computed is not used Signed-off-by: NHuang Ying <ying.huang@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marcin Slusarz 提交于
WARNING: vmlinux.o(.text+0xe684): Section mismatch in reference from the function register_nosave_region() to the function .init.text:__register_nosave_region() The function register_nosave_region() references the function __init __register_nosave_region(). This is often because register_nosave_region lacks a __init annotation or the annotation of __register_nosave_region is wrong. register_nosave_region calls __init function and is called only from __init functions Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Kerrisk 提交于
With man-pages-3.07, the numa_maps documentation home is now proc(5), so the reference in Documentation/vm/page_migration needs updating. (Cliff/Lee are removing numa_maps.5 from the numactl package.) Also, the download location for the numactl package changed a while back. This patch fixes both things, as well as a typo (provided-->provides). Signed-off-by: NMichael Kerrisk <mtk.manpages@gmail.com> Cc: Cliff Wickman <cpw@sgi.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
This is the minimal sequence that jams the allocator: void *p, *q, *r; p = alloc_bootmem(PAGE_SIZE); q = alloc_bootmem(64); free_bootmem(p, PAGE_SIZE); p = alloc_bootmem(PAGE_SIZE); r = alloc_bootmem(64); after this sequence (assuming that the allocator was empty or page-aligned before), pointer "q" will be equal to pointer "r". What's hapenning inside the allocator: p = alloc_bootmem(PAGE_SIZE); in allocator: last_end_off == PAGE_SIZE, bitmap contains bits 10000... q = alloc_bootmem(64); in allocator: last_end_off == PAGE_SIZE + 64, bitmap contains 11000... free_bootmem(p, PAGE_SIZE); in allocator: last_end_off == PAGE_SIZE + 64, bitmap contains 01000... p = alloc_bootmem(PAGE_SIZE); in allocator: last_end_off == PAGE_SIZE, bitmap contains 11000... r = alloc_bootmem(64); and now: it finds bit "2", as a place where to allocate (sidx) it hits the condition if (bdata->last_end_off && PFN_DOWN(bdata->last_end_off) + 1 == sidx)) start_off = ALIGN(bdata->last_end_off, align); -you can see that the condition is true, so it assigns start_off = ALIGN(bdata->last_end_off, align); (that is PAGE_SIZE) and allocates over already allocated block. With the patch it tries to continue at the end of previous allocation only if the previous allocation ended in the middle of the page. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Acked-by: NJohannes Weiner <hannes@saeurebad.de> Cc: David Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Merge branches 'acpica-release-fixes', 'ec-fix', 'dock', 'irq-bounds', 'thermal-fix', 'wmi' and 'acpi-cleanups' into release-2.6.27
-
由 Milan Broz 提交于
Do not use unsigned int if there is test for negative number... See drivers/acpi/processor_perflib.c static unsigned int ignore_ppc = -1; ... if (event == CPUFREQ_START && ignore_ppc <= 0) { ignore_ppc = 0; ... Signed-off-by: NMilan Broz <mbroz@redhat.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bjorn Helgaas 提交于
acpi_penalize_isa_irq() should validate irq before using it to index the acpi_irq_penalty[] table. Here's the path I'm concerned about: pnpacpi_parse_allocated_irqresource() { ... irq = acpi_register_gsi(gsi, triggering, polarity); if (irq >= 0) pcibios_penalize_isa_irq(irq, 1); There's no guarantee that acpi_register_gsi() will return an IRQ within the bounds of acpi_irq_penalty[]. I have not seen a failure I can attribute to this. However, ACPI_MAX_IRQS is only 256, and I'm pretty sure ia64 can have IRQs larger than that. I think this should go in 2.6.27. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Zhao Yakui 提交于
When EC is in Polling mode, OS will check the EC status continually by using the following source code: clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); while (time_before(jiffies, delay)) { if (acpi_ec_check_status(ec, event)) return 0; msleep(1); } But msleep is realized by the function of schedule_timeout. At the same time although one process is already waken up by some events, it won't be scheduled immediately. So maybe there exists the following phenomena: a. The current jiffies is already after the predefined jiffies. But before timeout happens, OS has no chance to check the EC status again. b. If preemptible schedule is enabled, maybe preempt schedule will happen before checking loop. When the process is resumed again, maybe timeout already happens, which means that OS has no chance to check the EC status. In such case maybe EC status is already what OS expects when timeout happens. But OS has no chance to check the EC status and regards it as AE_TIME. So it will be more appropriate that OS will try to check the EC status again when timeout happens. If the EC status is what we expect, it won't be regarded as timeout. Only when the EC status is not what we expect, it will be regarded as timeout, which means that EC controller can't give a response in time. http://bugzilla.kernel.org/show_bug.cgi?id=9823 http://bugzilla.kernel.org/show_bug.cgi?id=11141Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Zhao Yakui 提交于
On some ASUS laptops the ECDT gives the incorrect command/status & Data I/O register address. AK: it seems like the command/data addresses are exchanged. In such case it will cause that EC device can't be initialized correctly. To add the EC dmi table is to fix this issue. If the laptop falls into the EC dmi table, the EC command/data I/O address will be fixed. AK: Add comments describing this better http://bugzilla.kernel.org/show_bug.cgi?id=9399Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> tested-by : Jan Kasprzak <kas@fi.muni.cz> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-