- 16 10月, 2007 32 次提交
-
-
由 Yoichi Yuasa 提交于
Update AU1000 get_ethernet_addr(). Three functions were brought together in one. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
General cleanups mostly as suggested by checkpatch plus getting rid of homebrew version of offsetof(). Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
Caused by "[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()" aka 0795af57. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
msic_dcr_read() doesn't really do anything useful, just replace it with direct calls to dcr_read(). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
With the base stored in dcr_host_t, there's no need for callers to pass the dcr_n into dcr_unmap(). In fact this removes the possibility of them passing the incorrect value, which would then be iounmap()'ed. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
Now that all users of dcr_read()/dcr_write() add the dcr_host_t.base, we can save them the trouble and do it in dcr_read()/dcr_write(). As some background to why we just went through all this jiggery-pokery, benh sayeth: Initially the goal of the dcr_read/dcr_write routines was to operate like mfdcr/mtdcr which take absolute DCR numbers. The reason is that on 4xx hardware, indirect DCR access is a pain (goes through a table of instructions) and it's useful to have the compiler resolve an absolute DCR inline. We decided that wasn't worth the API bastardisation since most places where absolute DCR values are used are low level 4xx-only code which may as well continue using mfdcr/mtdcr, while the new API is designed for device "instances" that can exist on 4xx and Axon type platforms and may be located at variable DCR offsets. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
This requires us to do a sort-of fake dcr_map(), so that base is set properly. This will be fixed/removed when the device-tree-aware emac driver is merged. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
Now that dcr_host_t contains the base address, we can use that in the ibm_newemac code, rather than storing it separately. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Florin Malita 提交于
If pci_enable_device fails, bdx_probe returns without freeing the allocated pci_nic structure. Coverity CID 1908. Signed-off-by: NFlorin Malita <fmalita@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
bea3348e broke the build of tc35815.c for the non-NAPI case: CC drivers/net/tc35815.o drivers/net/tc35815.c: In function 'tc35815_interrupt': drivers/net/tc35815.c:1464: error: redefinition of 'lp' drivers/net/tc35815.c:1443: error: previous definition of 'lp' was here Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
Fix build breakage by the recent statistics cleanup in cset 09f75cd7. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Matteo Croce 提交于
New version which uses less locking and drops old API Signed-off-by: NMatteo Croce <technoboy85@gmail.com> Signed-off-by: NEugene Konev <ejka@imfi.kspu.ru> Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
The myri10ge driver is now at version 1.3.2-1.287. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Add support for IPv6 TSO to the myri10ge driver. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Add skb_is_gso_v6(). Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Update myri10ge firmware headers to latest upstream version with TSO6 and RSS support. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Fix one comment in myri10ge.c and update indendation and white spaces to match the code generated by indent from upstream CVS. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Vosburgh 提交于
Update the "don't change MAC of slaves" functionality added in previous changes to be a generic option, rather than something tied to IB devices, as it's occasionally useful for regular ethernet devices as well. Adds "fail_over_mac" option (which is automatically enabled for IB slaves), applicable only to active-backup mode. Includes documentation update. Updates bonding driver version to 3.2.0. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Moni Shoua 提交于
When bonding enslaves non Ethernet devices it takes pointers to functions in the module that owns the slaves. In this case it becomes unsafe to keep the bonding master registered after last slave was unenslaved because we don't know if the pointers are still valid. Destroying the bond when slave_cnt is zero ensures that these functions be used anymore. Signed-off-by: Moni Shoua <monis at voltaire.com> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Moni Shoua 提交于
Delay sending a gratuitous_arp when LINK_STATE_LINKWATCH_PENDING bit in dev->state field is on. This improves the chances for the arp packet to be transmitted. Signed-off-by: Moni Shoua <monis at voltaire.com> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Moni Shoua 提交于
bonding sometimes uses Ethernet constants (such as MTU and address length) which are not good when it enslaves non Ethernet devices (such as InfiniBand). Signed-off-by: Moni Shoua <monis at voltaire.com> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Moni Shoua 提交于
Allow to enslave devices when the bonding device is not up. Over the discussion held at the previous post this seemed to be the most clean way to go, where it is not expected to cause instabilities. Normally, the bonding driver is UP before any enslavement takes place. Once a netdevice is UP, the network stack acts to have it join some multicast groups (eg the all-hosts 224.0.0.1). Now, since ether_setup() have set the bonding device type to be ARPHRD_ETHER and address len to be ETHER_ALEN, the net core code computes a wrong multicast link address. This is b/c ip_eth_mc_map() is called where for multicast joins taking place after the enslavement another ip_xxx_mc_map() is called (eg ip_ib_mc_map() when the bond type is ARPHRD_INFINIBAND) Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Moni Shoua 提交于
This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Moni Shoua 提交于
This patch changes some of the bond netdevice attributes and functions to be that of the active slave for the case of the enslaved device not being of ARPHRD_ETHER type. Basically it overrides those setting done by ether_setup(), which are netdevice **type** dependent and hence might be not appropriate for devices of other types. It also enforces mutual exclusion on bonding slaves from dissimilar ether types, as was concluded over the v1 discussion. IPoIB (see Documentation/infiniband/ipoib.txt) MAC address is made of a 3 bytes IB QP (Queue Pair) number and 16 bytes IB port GID (Global ID) of the port this IPoIB device is bounded to. The QP is a resource created by the IB HW and the GID is an identifier burned into the HCA (i have omitted here some details which are not important for the bonding RFC). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Moni Shoua 提交于
When the bonding device senses a carrier loss of its active slave it replaces that slave with a new one. In between the times when the carrier of an IPoIB device goes down and ipoib_neigh is destroyed, it is possible that the bonding driver will send a packet on a new slave that uses an old ipoib_neigh. This patch detects and prevents this from happenning. Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: NRoland Dreier <rdreier@cisco.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Moni Shoua 提交于
IPoIB uses a two layer neighboring scheme, such that for each struct neighbour whose device is an ipoib one, there is a struct ipoib_neigh buddy which is created on demand at the tx flow by an ipoib_neigh_alloc(skb->dst->neighbour) call. When using the bonding driver, neighbours are created by the net stack on behalf of the bonding (master) device. On the tx flow the bonding code gets an skb such that skb->dev points to the master device, it changes this skb to point on the slave device and calls the slave hard_start_xmit function. Under this scheme, ipoib_neigh_destructor assumption that for each struct neighbour it gets, n->dev is an ipoib device and hence netdev_priv(n->dev) can be casted to struct ipoib_dev_priv is buggy. To fix it, this patch adds a dev field to struct ipoib_neigh which is used instead of the struct neighbour dev one, when n->dev->flags has the IFF_MASTER bit set. Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: NRoland Dreier <rdreier@cisco.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mark Brown 提交于
pci_enable_device() is __must_check so do that in natsemi_resume(). Signed-off-by: NMark Brown <broonie@sirena.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mark Brown 提交于
Unless we have failed to fill the RX ring the timer used by the natsemi driver is not particularly urgent and can use round_jiffies() to allow grouping with other timers. Signed-off-by: NMark Brown <broonie@sirena.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
git://git.linux-nfs.org/pub/linux/nfs-2.6由 Linus Torvalds 提交于
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (131 commits) NFSv4: Fix a typo in nfs_inode_reclaim_delegation NFS: Add a boot parameter to disable 64 bit inode numbers NFS: nfs_refresh_inode should clear cache_validity flags on success NFS: Fix a connectathon regression in NFSv3 and NFSv4 NFS: Use nfs_refresh_inode() in ops that aren't expected to change the inode SUNRPC: Don't call xprt_release in call refresh SUNRPC: Don't call xprt_release() if call_allocate fails SUNRPC: Fix buggy UDP transmission [23/37] Clean up duplicate includes in [2.6 patch] net/sunrpc/rpcb_clnt.c: make struct rpcb_program static SUNRPC: Use correct type in buffer length calculations SUNRPC: Fix default hostname created in rpc_create() nfs: add server port to rpc_pipe info file NFS: Get rid of some obsolete macros NFS: Simplify filehandle revalidation NFS: Ensure that nfs_link() returns a hashed dentry NFS: Be strict about dentry revalidation when doing exclusive create NFS: Don't zap the readdir caches upon error NFS: Remove the redundant nfs_reval_fsid() NFSv3: Always use directory post-op attributes in nfs3_proc_lookup ... Fix up trivial conflict due to sock_owned_by_user() cleanup manually in net/sunrpc/xprtsock.c
-
由 Linus Torvalds 提交于
Merge branch 'v2.6.24-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'v2.6.24-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: lockdep: annotate dir vs file i_mutex lockdep: per filesystem inode lock class lockdep: annotate kprobes irq fiddling lockdep: annotate rcu_read_{,un}lock{,_bh} lockdep: annotate journal_start() lockdep: s390: connect the sysexit hook lockdep: x86_64: connect the sysexit hook lockdep: i386: connect the sysexit hook lockdep: syscall exit check lockdep: fixup mutex annotations lockdep: fix mismatched lockdep_depth/curr_chain_hash lockdep: Avoid /proc/lockdep & lock_stat infinite output lockdep: maintainers
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] update sn2_defconfig [IA64] Fix kernel hangup in kdump on INIT [IA64] Fix kernel panic in kdump on INIT [IA64] Remove vector from ia64_machine_kexec() [IA64] Fix race when multiple cpus go through MCA [IA64] Remove needless delay in MCA rendezvous [IA64] add driver for ACPI methods to call native firmware [IA64] abstract SAL_CALL wrapper to allow other firmware entry points [IA64] perfmon: Remove exit_pfm_fs() [IA64] tree-wide: Misc __cpu{initdata, init, exit} annotations
-
由 Linus Torvalds 提交于
Commit 5a7ad7f0 removed all uses of 'retval', but didn't remove the variable itself. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 10月, 2007 8 次提交
-
-
由 Jes Sorensen 提交于
Update defonfig file for sn2 to match recent changes in config options. Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: (140 commits) sched: sync wakeups preempt too sched: affine sync wakeups sched: guest CPU accounting: maintain guest state in KVM sched: guest CPU accounting: maintain stats in account_system_time() sched: guest CPU accounting: add guest-CPU /proc/<pid>/stat fields sched: guest CPU accounting: add guest-CPU /proc/stat field sched: domain sysctl fixes: add terminator comment sched: domain sysctl fixes: do not crash on allocation failure sched: domain sysctl fixes: unregister the sysctl table before domains sched: domain sysctl fixes: use for_each_online_cpu() sched: domain sysctl fixes: use kcalloc() Make scheduler debug file operations const sched: enable wake-idle on CONFIG_SCHED_MC=y sched: reintroduce topology.h tunings sched: allow the immediate migration of cache-cold tasks sched: debug, improve migration statistics sched: debug: increase width of debug line sched: activate task_hot() only on fair-scheduled tasks sched: reintroduce cache-hot affinity sched: speed up context-switches a bit ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits) [SCSI] gdth: fix CONFIG_ISA build failure [SCSI] esp_scsi: remove __dev{init,exit} [SCSI] gdth: !use_sg cleanup and use of scsi accessors [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2 [SCSI] gdth: Setup proper per-command private data [SCSI] gdth: Remove gdth_ctr_tab[] [SCSI] gdth: switch to modern scsi host registration [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes [SCSI] gdth: clean up host private data [SCSI] gdth: Remove virt hosts [SCSI] gdth: Reorder scsi_host_template intitializers [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers [SCSI] gdth: Remove 2.4.x support, in-kernel changelog [SCSI] gdth: split out pci probing [SCSI] gdth: split out eisa probing [SCSI] gdth: split out isa probing gdth: Make one abuse of scsi_cmnd less obvious [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE ...
-
由 Linus Torvalds 提交于
* 'agp-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/agp-2.6: fix use after free in amd create gatt pages AGP fix race condition between unmapping and freeing pages
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-patches' of ssh://master.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: via invalid device ids removal radeon: Commit the ring after each partial texture upload blit. i915: fix vbl swap allocation size. drm: Replace DRM_IOCTL_ARGS with (dev, data, file_priv) and remove DRM_DEVICE. drm: remove XFREE86_VERSION macros. drm: Replace filp in ioctl arguments with drm_file *file_priv. drm: Remove DRM_ERR OS macro.
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'nfs-server-stable' of git://linux-nfs.org/~bfields/linux: knfsd: query filesystem for NFSv4 getattr of FATTR4_MAXNAME knfsd: nfsv4 delegation recall should take reference on client knfsd: don't shutdown callbacks until nfsv4 client is freed knfsd: let nfsd manage timing out its own leases knfsd: Add source address to sunrpc svc errors knfsd: 64 bit ino support for NFS server svcgss: move init code into separate function knfsd: remove code duplication in nfsd4_setclientid() nfsd warning fix knfsd: fix callback rpc cred knfsd: move nfsv4 slab creation/destruction to module init/exit knfsd: spawn kernel thread to probe callback channel knfsd: nfs4 name->id mapping not correctly parsing negative downcall knfsd: demote some printk()s to dprintk()s knfsd: cleanup of nfsd4 cmp_* functions knfsd: delete code made redundant by map_new_errors nfsd: fix horrible indentation in nfsd_setattr nfsd: remove unused cache_for_each macro nfsd: tone down inaccurate dprintk
-
由 Geert Uytterhoeven 提交于
Kill unused variables Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Kosina 提交于
Fix bogus copying of data into userspace when HIDIOCGRDESC is issued. HID-transport layer makes sure that dev->hid->rdesc is not larger than HID_MAX_DESCRIPTOR_SIZE. Noticed-by: NAl Viro <viro@ftp.linux.org.uk> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-