Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 16 8月, 2013 1 次提交
    • L
      Fix TLB gather virtual address range invalidation corner cases · 2b047252
      由 Linus Torvalds 提交于 
      Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc6 ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c35 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a9 ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.
Reported-bisected-and-tested-by: NBen Tebulin <tebulin@googlemail.com>
Build-testing-by: NStephen Rothwell <sfr@canb.auug.org.au>
Build-testing-by: NRichard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2b047252
  3. 01 8月, 2013 1 次提交
  5. 11 7月, 2013 1 次提交
  7. 10 7月, 2013 2 次提交
  9. 04 7月, 2013 1 次提交
  11. 10 5月, 2013 1 次提交
  13. 08 5月, 2013 1 次提交
  15. 30 4月, 2013 7 次提交
    • C
      mm/mmap: check for RLIMIT_AS before unmapping · e8420a8e
      由 Cyril Hrubis 提交于 
      Fix a corner case for MAP_FIXED when requested mapping length is larger
than rlimit for virtual memory.  In such case any overlapping mappings
are unmapped before we check for the limit and return ENOMEM.

The check is moved before the loop that unmaps overlapping parts of
existing mappings.  When we are about to hit the limit (currently mapped
pages + len > limit) we scan for overlapping pages and check again
accounting for them.

This fixes situation when userspace program expects that the previous
mappings are preserved after the mmap() syscall has returned with error.
(POSIX clearly states that successfull mapping shall replace any
previous mappings.)

This corner case was found and can be tested with LTP testcase:

testcases/open_posix_testsuite/conformance/interfaces/mmap/24-2.c

In this case the mmap, which is clearly over current limit, unmaps
dynamic libraries and the testcase segfaults right after returning into
userspace.

I've also looked at the second instance of the unmapping loop in the
do_brk().  The do_brk() is called from brk() syscall and from vm_brk().
The brk() syscall checks for overlapping mappings and bails out when
there are any (so it can't be triggered from the brk syscall).  The
vm_brk() is called only from binmft handlers so it shouldn't be
triggered unless binmft handler created overlapping mappings.
Signed-off-by: NCyril Hrubis <chrubis@suse.cz>
Reviewed-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e8420a8e
    • A
      mm: reinititalise user and admin reserves if memory is added or removed · 1640879a
      由 Andrew Shewmaker 提交于 
      Alter the admin and user reserves of the previous patches in this series
when memory is added or removed.

If memory is added and the reserves have been eliminated or increased
above the default max, then we'll trust the admin.

If memory is removed and there isn't enough free memory, then we need to
reset the reserves.

Otherwise keep the reserve set by the admin.

The reserve reset code is the same as the reserve initialization code.

I tested hot addition and removal by triggering it via sysfs.  The
reserves shrunk when they were set high and memory was removed.  They
were reset higher when memory was added again.

[akpm@linux-foundation.org: use register_hotmemory_notifier()]
[akpm@linux-foundation.org: init_user_reserve() and init_admin_reserve can no longer be __meminit]
[fengguang.wu@intel.com: make init_reserve_notifier() static]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NAndrew Shewmaker <agshew@gmail.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1640879a
    • A
      mm: replace hardcoded 3% with admin_reserve_pages knob · 4eeab4f5
      由 Andrew Shewmaker 提交于 
      Add an admin_reserve_kbytes knob to allow admins to change the hardcoded
memory reserve to something other than 3%, which may be multiple
gigabytes on large memory systems.  Only about 8MB is necessary to
enable recovery in the default mode, and only a few hundred MB are
required even when overcommit is disabled.

This affects OVERCOMMIT_GUESS and OVERCOMMIT_NEVER.

admin_reserve_kbytes is initialized to min(3% free pages, 8MB)

I arrived at 8MB by summing the RSS of sshd or login, bash, and top.

Please see first patch in this series for full background, motivation,
testing, and full changelog.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make init_admin_reserve() static]
Signed-off-by: NAndrew Shewmaker <agshew@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4eeab4f5
    • A
      mm: limit growth of 3% hardcoded other user reserve · c9b1d098
      由 Andrew Shewmaker 提交于 
      Add user_reserve_kbytes knob.

Limit the growth of the memory reserved for other user processes to
min(3% current process size, user_reserve_pages).  Only about 8MB is
necessary to enable recovery in the default mode, and only a few hundred
MB are required even when overcommit is disabled.

user_reserve_pages defaults to min(3% free pages, 128MB)

I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ...
then adding the RSS of each.

This only affects OVERCOMMIT_NEVER mode.

Background

1. user reserve

__vm_enough_memory reserves a hardcoded 3% of the current process size for
other applications when overcommit is disabled.  This was done so that a
user could recover if they launched a memory hogging process.  Without the
reserve, a user would easily run into a message such as:

bash: fork: Cannot allocate memory

2. admin reserve

Additionally, a hardcoded 3% of free memory is reserved for root in both
overcommit 'guess' and 'never' modes.  This was intended to prevent a
scenario where root-cant-log-in and perform recovery operations.

Note that this reserve shrinks, and doesn't guarantee a useful reserve.

Motivation

The two hardcoded memory reserves should be updated to account for current
memory sizes.

Also, the admin reserve would be more useful if it didn't shrink too much.

When the current code was originally written, 1GB was considered
"enterprise".  Now the 3% reserve can grow to multiple GB on large memory
systems, and it only needs to be a few hundred MB at most to enable a user
or admin to recover a system with an unwanted memory hogging process.

I've found that reducing these reserves is especially beneficial for a
specific type of application load:

 * single application system
 * one or few processes (e.g. one per core)
 * allocating all available memory
 * not initializing every page immediately
 * long running

I've run scientific clusters with this sort of load.  A long running job
sometimes failed many hours (weeks of CPU time) into a calculation.  They
weren't initializing all of their memory immediately, and they weren't
using calloc, so I put systems into overcommit 'never' mode.  These
clusters run diskless and have no swap.

However, with the current reserves, a user wishing to allocate as much
memory as possible to one process may be prevented from using, for
example, almost 2GB out of 32GB.

The effect is less, but still significant when a user starts a job with
one process per core.  I have repeatedly seen a set of processes
requesting the same amount of memory fail because one of them could not
allocate the amount of memory a user would expect to be able to allocate.
For example, Message Passing Interfce (MPI) processes, one per core.  And
it is similar for other parallel programming frameworks.

Changing this reserve code will make the overcommit never mode more useful
by allowing applications to allocate nearly all of the available memory.

Also, the new admin_reserve_kbytes will be safer than the current behavior
since the hardcoded 3% of available memory reserve can shrink to something
useless in the case where applications have grabbed all available memory.

Risks

* "bash: fork: Cannot allocate memory"

  The downside of the first patch-- which creates a tunable user reserve
  that is only used in overcommit 'never' mode--is that an admin can set
  it so low that a user may not be able to kill their process, even if
  they already have a shell prompt.

  Of course, a user can get in the same predicament with the current 3%
  reserve--they just have to launch processes until 3% becomes negligible.

* root-cant-log-in problem

  The second patch, adding the tunable rootuser_reserve_pages, allows
  the admin to shoot themselves in the foot by setting it too small.  They
  can easily get the system into a state where root-can't-log-in.

  However, the new admin_reserve_kbytes will be safer than the current
  behavior since the hardcoded 3% of available memory reserve can shrink
  to something useless in the case where applications have grabbed all
  available memory.

Alternatives

 * Memory cgroups provide a more flexible way to limit application memory.

   Not everyone wants to set up cgroups or deal with their overhead.

 * We could create a fourth overcommit mode which provides smaller reserves.

   The size of useful reserves may be drastically different depending
   on the whether the system is embedded or enterprise.

 * Force users to initialize all of their memory or use calloc.

   Some users don't want/expect the system to overcommit when they malloc.
   Overcommit 'never' mode is for this scenario, and it should work well.

The new user and admin reserve tunables are simple to use, with low
overhead compared to cgroups.  The patches preserve current behavior where
3% of memory is less than 128MB, except that the admin reserve doesn't
shrink to an unusable size under pressure.  The code allows admins to tune
for embedded and enterprise usage.

FAQ

 * How is the root-cant-login problem addressed?
   What happens if admin_reserve_pages is set to 0?

   Root is free to shoot themselves in the foot by setting
   admin_reserve_kbytes too low.

   On x86_64, the minimum useful reserve is:
     8MB for overcommit 'guess'
   128MB for overcommit 'never'

   admin_reserve_pages defaults to min(3% free memory, 8MB)

   So, anyone switching to 'never' mode needs to adjust
   admin_reserve_pages.

 * How do you calculate a minimum useful reserve?

   A user or the admin needs enough memory to login and perform
   recovery operations, which includes, at a minimum:

   sshd or login + bash (or some other shell) + top (or ps, kill, etc.)

   For overcommit 'guess', we can sum resident set sizes (RSS)
   because we only need enough memory to handle what the recovery
   programs will typically use. On x86_64 this is about 8MB.

   For overcommit 'never', we can take the max of their virtual sizes (VSZ)
   and add the sum of their RSS. We use VSZ instead of RSS because mode
   forces us to ensure we can fulfill all of the requested memory allocations--
   even if the programs only use a fraction of what they ask for.
   On x86_64 this is about 128MB.

   When swap is enabled, reserves are useful even when they are as
   small as 10MB, regardless of overcommit mode.

   When both swap and overcommit are disabled, then the admin should
   tune the reserves higher to be absolutley safe. Over 230MB each
   was safest in my testing.

 * What happens if user_reserve_pages is set to 0?

   Note, this only affects overcomitt 'never' mode.

   Then a user will be able to allocate all available memory minus
   admin_reserve_kbytes.

   However, they will easily see a message such as:

   "bash: fork: Cannot allocate memory"

   And they won't be able to recover/kill their application.
   The admin should be able to recover the system if
   admin_reserve_kbytes is set appropriately.

 * What's the difference between overcommit 'guess' and 'never'?

   "Guess" allows an allocation if there are enough free + reclaimable
   pages. It has a hardcoded 3% of free pages reserved for root.

   "Never" allows an allocation if there is enough swap + a configurable
   percentage (default is 50) of physical RAM. It has a hardcoded 3% of
   free pages reserved for root, like "Guess" mode. It also has a
   hardcoded 3% of the current process size reserved for additional
   applications.

 * Why is overcommit 'guess' not suitable even when an app eventually
   writes to every page? It takes free pages, file pages, available
   swap pages, reclaimable slab pages into consideration. In other words,
   these are all pages available, then why isn't overcommit suitable?

   Because it only looks at the present state of the system. It
   does not take into account the memory that other applications have
   malloced, but haven't initialized yet. It overcommits the system.

Test Summary

There was little change in behavior in the default overcommit 'guess'
mode with swap enabled before and after the patch. This was expected.

Systems run most predictably (i.e. no oom kills) in overcommit 'never'
mode with swap enabled. This also allowed the most memory to be allocated
to a user application.

Overcommit 'guess' mode without swap is a bad idea. It is easy to
crash the system. None of the other tested combinations crashed.
This matches my experience on the Roadrunner supercomputer.

Without the tunable user reserve, a system in overcommit 'never' mode
and without swap does not allow the admin to recover, although the
admin can.

With the new tunable reserves, a system in overcommit 'never' mode
and without swap can be configured to:

1. maximize user-allocatable memory, running close to the edge of
recoverability

2. maximize recoverability, sacrificing allocatable memory to
ensure that a user cannot take down a system

Test Description

Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap

System is booted into multiuser console mode, with unnecessary services
turned off. Caches were dropped before each test.

Hogs are user memtester processes that attempt to allocate all free memory
as reported by /proc/meminfo

In overcommit 'never' mode, memory_ratio=100

Test Results

3.9.0-rc1-mm1

Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
----------   ----   ----   -------------   ----   -------------   --------------
guess        yes    1      5432/5432       no     yes             yes
guess        yes    4      5444/5444       1      yes             yes
guess        no     1      5302/5449       no     yes             yes
guess        no     4      -               crash  no              no

never        yes    1      5460/5460       1      yes             yes
never        yes    4      5460/5460       1      yes             yes
never        no     1      5218/5432       no     no              yes
never        no     4      5203/5448       no     no              yes

3.9.0-rc1-mm1-tunablereserves

User and Admin Recovery show their respective reserves, if applicable.

Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
----------   ----   ----   -------------   ----   -------------   --------------
guess        yes    1      5419/5419       no     - yes           8MB yes
guess        yes    4      5436/5436       1      - yes           8MB yes
guess        no     1      5440/5440       *      - yes           8MB yes
guess        no     4      -               crash  - no            8MB no

* process would successfully mlock, then the oom killer would pick it

never        yes    1      5446/5446       no     10MB yes        20MB yes
never        yes    4      5456/5456       no     10MB yes        20MB yes
never        no     1      5387/5429       no     128MB no        8MB barely
never        no     1      5323/5428       no     226MB barely    8MB barely
never        no     1      5323/5428       no     226MB barely    8MB barely

never        no     1      5359/5448       no     10MB no         10MB barely

never        no     1      5323/5428       no     0MB no          10MB barely
never        no     1      5332/5428       no     0MB no          50MB yes
never        no     1      5293/5429       no     0MB no          90MB yes

never        no     1      5001/5427       no     230MB yes       338MB yes
never        no     4*     4998/5424       no     230MB yes       338MB yes

* more memtesters were launched, able to allocate approximately another 100MB

Future Work

 - Test larger memory systems.

 - Test an embedded image.

 - Test other architectures.

 - Time malloc microbenchmarks.

 - Would it be useful to be able to set overcommit policy for
   each memory cgroup?

 - Some lines are slightly above 80 chars.
   Perhaps define a macro to convert between pages and kb?
   Other places in the kernel do this.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make init_user_reserve() static]
Signed-off-by: NAndrew Shewmaker <agshew@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c9b1d098
    • H
      mm: merging memory blocks resets mempolicy · 1444f92c
      由 Hampson, Steven T 提交于 
      Using mbind to change the mempolicy to MPOL_BIND on several adjacent
mmapped blocks may result in a reset of the mempolicy to MPOL_DEFAULT in
vma_adjust.

Test code.  Correct result is three lines containing "OK".

#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
#include <numaif.h>
#include <errno.h>

/* gcc mbind_test.c -lnuma -o mbind_test -Wall */
#define MAXNODE 4096

void allocate()
{
	int ret;
	int len;
	int policy = -1;
	unsigned char *p;
	unsigned long mask[MAXNODE] = { 0 };
	unsigned long retmask[MAXNODE] = { 0 };

	len = getpagesize() * 0x2fc00;
	p = mmap(NULL, len, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
		 -1, 0);
	if (p == MAP_FAILED)
		printf("mbind err: %d\n", errno);

	mask[0] = 1;
	ret = mbind(p, len, MPOL_BIND, mask, MAXNODE, 0);
	if (ret < 0)
		printf("mbind err: %d %d\n", ret, errno);
	ret = get_mempolicy(&policy, retmask, MAXNODE, p, MPOL_F_ADDR);
	if (ret < 0)
		printf("get_mempolicy err: %d %d\n", ret, errno);

	if (policy == MPOL_BIND)
		printf("OK\n");
	else
		printf("ERROR: policy is %d\n", policy);
}

int main()
{
	allocate();
	allocate();
	allocate();
	return 0;
}
Signed-off-by: NSteven T Hampson <steven.t.hampson@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1444f92c
    • H
      mm: allow arch code to control the user page table ceiling · 6ee8630e
      由 Hugh Dickins 提交于 
      On architectures where a pgd entry may be shared between user and kernel
(e.g.  ARM+LPAE), freeing page tables needs a ceiling other than 0.
This patch introduces a generic USER_PGTABLES_CEILING that arch code can
override.  It is the responsibility of the arch code setting the ceiling
to ensure the complete freeing of the page tables (usually in
pgd_free()).

[catalin.marinas@arm.com: commit log; shift_arg_pages(), asm-generic/pgtables.h changes]
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: <stable@vger.kernel.org>	[3.3+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6ee8630e
    • Z
      mmap: find_vma: remove the WARN_ON_ONCE(!mm) check · ee5df057
      由 Zhang Yanfei 提交于 
      Remove the WARN_ON_ONCE(!mm) check as the comment suggested.  Kernel
code calls find_vma only when it is absolutely sure that the mm_struct
arg to it is non-NULL.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: k80c <k80ck80c@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ee5df057
  17. 25 4月, 2013 1 次提交
  19. 05 4月, 2013 1 次提交
    • J
      mm: prevent mmap_cache race in find_vma() · b6a9b7f6
      由 Jan Stancek 提交于 
      find_vma() can be called by multiple threads with read lock
held on mm->mmap_sem and any of them can update mm->mmap_cache.
Prevent compiler from re-fetching mm->mmap_cache, because other
readers could update it in the meantime:

               thread 1                             thread 2
                                        |
  find_vma()                            |  find_vma()
    struct vm_area_struct *vma = NULL;  |
    vma = mm->mmap_cache;               |
    if (!(vma && vma->vm_end > addr     |
        && vma->vm_start <= addr)) {    |
                                        |    mm->mmap_cache = vma;
    return vma;                         |
     ^^ compiler may optimize this      |
        local variable out and re-read  |
        mm->mmap_cache                  |

This issue can be reproduced with gcc-4.8.0-1 on s390x by running
mallocstress testcase from LTP, which triggers:

  kernel BUG at mm/rmap.c:1088!
    Call Trace:
     ([<000003d100c57000>] 0x3d100c57000)
      [<000000000023a1c0>] do_wp_page+0x2fc/0xa88
      [<000000000023baae>] handle_pte_fault+0x41a/0xac8
      [<000000000023d832>] handle_mm_fault+0x17a/0x268
      [<000000000060507a>] do_protection_exception+0x1e2/0x394
      [<0000000000603a04>] pgm_check_handler+0x138/0x13c
      [<000003fffcf1f07a>] 0x3fffcf1f07a
    Last Breaking-Event-Address:
      [<000000000024755e>] page_add_new_anon_rmap+0xc2/0x168

Thanks to Jakub Jelinek for his insight on gcc and helping to
track this down.
Signed-off-by: NJan Stancek <jstancek@redhat.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b6a9b7f6
  21. 29 3月, 2013 1 次提交
  23. 28 2月, 2013 1 次提交
    • L
      mm: do not grow the stack vma just because of an overrun on preceding vma · 09884964
      由 Linus Torvalds 提交于 
      The stack vma is designed to grow automatically (marked with VM_GROWSUP
or VM_GROWSDOWN depending on architecture) when an access is made beyond
the existing boundary.  However, particularly if you have not limited
your stack at all ("ulimit -s unlimited"), this can cause the stack to
grow even if the access was really just one past *another* segment.

And that's wrong, especially since we first grow the segment, but then
immediately later enforce the stack guard page on the last page of the
segment.  So _despite_ first growing the stack segment as a result of
the access, the kernel will then make the access cause a SIGSEGV anyway!

So do the same logic as the guard page check does, and consider an
access to within one page of the next segment to be a bad access, rather
than growing the stack to abut the next segment.
Reported-and-tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      09884964
  25. 24 2月, 2013 8 次提交
  27. 23 2月, 2013 1 次提交
  29. 08 2月, 2013 1 次提交
  31. 05 2月, 2013 1 次提交
  33. 12 1月, 2013 1 次提交
    • J
      mm: mmap: annotate vm_lock_anon_vma locking properly for lockdep · 572043c9
      由 Jiri Kosina 提交于 
      Commit 5a505085 ("mm/rmap: Convert the struct anon_vma::mutex to an
rwsem") turned anon_vma mutex to rwsem.

However, the properly annotated nested locking in mm_take_all_locks()
has been converted from

	mutex_lock_nest_lock(&anon_vma->root->mutex, &mm->mmap_sem);

to

	down_write(&anon_vma->root->rwsem);

which is incomplete, and causes the false positive report from lockdep
below.

Annotate the fact that mmap_sem is used as an outter lock to serialize
taking of all the anon_vma rwsems at once no matter the order, using the
down_write_nest_lock() primitive.

This patch fixes this lockdep report:

 =============================================
 [ INFO: possible recursive locking detected ]
 3.8.0-rc2-00036-g5f738967 #171 Not tainted
 ---------------------------------------------
 qemu-kvm/2315 is trying to acquire lock:
  (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0

 but task is already holding lock:
  (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&anon_vma->rwsem);
   lock(&anon_vma->rwsem);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 4 locks held by qemu-kvm/2315:
  #0:  (&mm->mmap_sem){++++++}, at: do_mmu_notifier_register+0xfc/0x170
  #1:  (mm_all_locks_mutex){+.+...}, at: mm_take_all_locks+0x36/0x1b0
  #2:  (&mapping->i_mmap_mutex){+.+...}, at: mm_take_all_locks+0xc9/0x1b0
  #3:  (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0

 stack backtrace:
 Pid: 2315, comm: qemu-kvm Not tainted 3.8.0-rc2-00036-g5f738967 #171
 Call Trace:
   print_deadlock_bug+0xf2/0x100
   validate_chain+0x4f6/0x720
   __lock_acquire+0x359/0x580
   lock_acquire+0x121/0x190
   down_write+0x3f/0x70
   mm_take_all_locks+0x149/0x1b0
   do_mmu_notifier_register+0x68/0x170
   mmu_notifier_register+0xe/0x10
   kvm_create_vm+0x22b/0x330 [kvm]
   kvm_dev_ioctl+0xf8/0x1a0 [kvm]
   do_vfs_ioctl+0x9d/0x350
   sys_ioctl+0x91/0xb0
   system_call_fastpath+0x16/0x1b
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mel Gorman <mel@csn.ul.ie>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      572043c9
  35. 13 12月, 2012 2 次提交
    • M
      mm: protect against concurrent vma expansion · 4128997b
      由 Michel Lespinasse 提交于 
      expand_stack() runs with a shared mmap_sem lock.  Because of this, there
could be multiple concurrent stack expansions in the same mm, which may
cause problems in the vma gap update code.

I propose to solve this by taking the mm->page_table_lock around such vma
expansions, in order to avoid the concurrency issue.  We only have to
worry about concurrent expand_stack() calls here, since we hold a shared
mmap_sem lock and all vma modificaitons other than expand_stack() are done
under an exclusive mmap_sem lock.

I previously tried to achieve the same effect by making sure all growable
vmas in a given mm would share the same anon_vma, which we already lock
here.  However this turned out to be difficult - all of the schemes I
tried for refcounting the growable anon_vma and clearing turned out ugly.
So, I'm now proposing only the minimal fix.

The overhead of taking the page table lock during stack expansion is
expected to be small: glibc doesn't use expandable stacks for the threads
it creates, so having multiple growable stacks is actually uncommon and we
don't expect the page table lock to get bounced between threads.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4128997b
    • J
      mm: WARN_ON_ONCE if f_op->mmap() change vma's start address · 2897b4d2
      由 Joonsoo Kim 提交于 
      During reviewing the source code, I found a comment which mention that
after f_op->mmap(), vma's start address can be changed.  I didn't verify
that it is really possible, because there are so many f_op->mmap()
implementation.  But if there are some mmap() which change vma's start
address, it is possible error situation, because we already prepare prev
vma, rb_link and rb_parent and these are related to original address.

So add WARN_ON_ONCE for finding that this situtation really happens.
Signed-off-by: NJoonsoo Kim <js1304@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2897b4d2
  37. 12 12月, 2012 4 次提交
    • M
      mm: vm_unmapped_area() lookup function · db4fbfb9
      由 Michel Lespinasse 提交于 
      Implement vm_unmapped_area() using the rb_subtree_gap and highest_vm_end
information to look up for suitable virtual address space gaps.

struct vm_unmapped_area_info is used to define the desired allocation
request:
 - lowest or highest possible address matching the remaining constraints
 - desired gap length
 - low/high address limits that the gap must fit into
 - alignment mask and offset

Also update the generic arch_get_unmapped_area[_topdown] functions to make
use of vm_unmapped_area() instead of implementing a brute force search.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      db4fbfb9
    • M
      mm: check rb_subtree_gap correctness · 5a0768f6
      由 Michel Lespinasse 提交于 
      When CONFIG_DEBUG_VM_RB is enabled, check that rb_subtree_gap is correctly
set for every vma and that mm->highest_vm_end is also correct.

Also add an explicit 'bug' variable to track if browse_rb() detected any
invalid condition.

[akpm@linux-foundation.org: repair innovative coding-style inventions]
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5a0768f6
    • M
      mm: augment vma rbtree with rb_subtree_gap · d3737187
      由 Michel Lespinasse 提交于 
      Define vma->rb_subtree_gap as the largest gap between any vma in the
subtree rooted at that vma, and their predecessor.  Or, for a recursive
definition, vma->rb_subtree_gap is the max of:

 - vma->vm_start - vma->vm_prev->vm_end
 - rb_subtree_gap fields of the vmas pointed by vma->rb.rb_left and
   vma->rb.rb_right

This will allow get_unmapped_area_* to find a free area of the right
size in O(log(N)) time, instead of potentially having to do a linear
walk across all the VMAs.

Also define mm->highest_vm_end as the vm_end field of the highest vma,
so that we can easily check if the following gap is suitable.

This does have the potential to make unmapping VMAs more expensive,
especially for processes with very large numbers of VMAs, where the VMA
rbtree can grow quite deep.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d3737187
    • A
      mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB · 42d7395f
      由 Andi Kleen 提交于 
      There was some desire in large applications using MAP_HUGETLB or
SHM_HUGETLB to use 1GB huge pages on some mappings, and stay with 2MB on
others.  This is useful together with NUMA policy: use 2MB interleaving
on some mappings, but 1GB on local mappings.

This patch extends the IPC/SHM syscall interfaces slightly to allow
specifying the page size.

It borrows some upper bits in the existing flag arguments and allows
encoding the log of the desired page size in addition to the *_HUGETLB
flag.  When 0 is specified the default size is used, this makes the
change fully compatible.

Extending the internal hugetlb code to handle this is straight forward.
Instead of a single mount it just keeps an array of them and selects the
right mount based on the specified page size.  When no page size is
specified it uses the mount of the default page size.

The change is not visible in /proc/mounts because internal mounts don't
appear there.  It also has very little overhead: the additional mounts
just consume a super block, but not more memory when not used.

I also exported the new flags to the user headers (they were previously
under __KERNEL__).  Right now only symbols for x86 and some other
architecture for 1GB and 2MB are defined.  The interface should already
work for all other architectures though.  Only architectures that define
multiple hugetlb sizes actually need it (that is currently x86, tile,
powerpc).  However tile and powerpc have user configurable hugetlb
sizes, so it's not easy to add defines.  A program on those
architectures would need to query sysfs and use the appropiate log2.

[akpm@linux-foundation.org: cleanups]
[rientjes@google.com: fix build]
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      42d7395f
  39. 11 12月, 2012 2 次提交
    • I
      mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable · 4fc3f1d6
      由 Ingo Molnar 提交于 
      rmap_walk_anon() and try_to_unmap_anon() appears to be too
careful about locking the anon vma: while it needs protection
against anon vma list modifications, it does not need exclusive
access to the list itself.

Transforming this exclusive lock to a read-locked rwsem removes
a global lock from the hot path of page-migration intense
threaded workloads which can cause pathological performance like
this:

    96.43%        process 0  [kernel.kallsyms]  [k] perf_trace_sched_switch
                  |
                  --- perf_trace_sched_switch
                      __schedule
                      schedule
                      schedule_preempt_disabled
                      __mutex_lock_common.isra.6
                      __mutex_lock_slowpath
                      mutex_lock
                     |
                     |--50.61%-- rmap_walk
                     |          move_to_new_page
                     |          migrate_pages
                     |          migrate_misplaced_page
                     |          __do_numa_page.isra.69
                     |          handle_pte_fault
                     |          handle_mm_fault
                     |          __do_page_fault
                     |          do_page_fault
                     |          page_fault
                     |          __memset_sse2
                     |          |
                     |           --100.00%-- worker_thread
                     |                     |
                     |                      --100.00%-- start_thread
                     |
                      --49.39%-- page_lock_anon_vma
                                try_to_unmap_anon
                                try_to_unmap
                                migrate_pages
                                migrate_misplaced_page
                                __do_numa_page.isra.69
                                handle_pte_fault
                                handle_mm_fault
                                __do_page_fault
                                do_page_fault
                                page_fault
                                __memset_sse2
                                |
                                 --100.00%-- worker_thread
                                           start_thread

With this change applied the profile is now nicely flat
and there's no anon-vma related scheduling/blocking.

Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(),
to make it clearer that it's an exclusive write-lock in
that case - suggested by Rik van Riel.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Turner <pjt@google.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NMel Gorman <mgorman@suse.de>
      4fc3f1d6
    • I
      mm/rmap: Convert the struct anon_vma::mutex to an rwsem · 5a505085
      由 Ingo Molnar 提交于 
      Convert the struct anon_vma::mutex to an rwsem, which will help
in solving a page-migration scalability problem. (Addressed in
a separate patch.)

The conversion is simple and straightforward: in every case
where we mutex_lock()ed we'll now down_write().
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Turner <pjt@google.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NMel Gorman <mgorman@suse.de>
      5a505085
  41. 17 11月, 2012 1 次提交
    • M
      mm: add anon_vma_lock to validate_mm() · 63c3b902
      由 Michel Lespinasse 提交于 
      Iterating over the vma->anon_vma_chain without anon_vma_lock may cause
NULL ptr deref in anon_vma_interval_tree_verify(), because the node in the
chain might have been removed.

  BUG: unable to handle kernel paging request at fffffffffffffff0
  IP: [<ffffffff8122c29c>] anon_vma_interval_tree_verify+0xc/0xa0
  PGD 4e28067 PUD 4e29067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU 0
  Pid: 9050, comm: trinity-child64 Tainted: G        W    3.7.0-rc2-next-20121025-sasha-00001-g673f98e-dirty #77
  RIP: 0010: anon_vma_interval_tree_verify+0xc/0xa0
  Process trinity-child64 (pid: 9050, threadinfo ffff880045f80000, task ffff880048eb0000)
  Call Trace:
    validate_mm+0x58/0x1e0
    vma_adjust+0x635/0x6b0
    __split_vma.isra.22+0x161/0x220
    split_vma+0x24/0x30
    sys_madvise+0x5da/0x7b0
    tracesys+0xe1/0xe6
  RIP  anon_vma_interval_tree_verify+0xc/0xa0
  CR2: fffffffffffffff0

Figured out by Bob Liu.
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Bob Liu <lliubbo@gmail.com>
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      63c3b902