- 22 1月, 2008 10 次提交
-
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: tc35815: Use irq number for tc35815-mac platform device id [MIPS] Malta: Fix reading the PCI clock frequency on big-endian [MIPS] SMTC: Fix build error.
-
由 Andrew G. Morgan 提交于
In linux-2.6.24-rc1, security/commoncap.c:cap_inh_is_capped() was introduced. It has the exact reverse of its intended behavior. This led to an unintended privilege esculation involving a process' inheritable capability set. To be exposed to this bug, you need to have Filesystem Capabilities enabled and in use. That is: - CONFIG_SECURITY_FILE_CAPABILITIES must be defined for the buggy code to be compiled in. - You also need to have files on your system marked with fI bits raised. Signed-off-by: NAndrew G. Morgan <morgan@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
-
由 Stefan Schmidt 提交于
Fix line length calculation. var->width is the size of the display in mm. We like to use the pixel size. Without this fix, dynamic (fbset) based resolution and depths changes with s3c2410_fb don't work at all. Spotted by john cass <johnpcass@yahoo.com> Signed-off-by: NStefan Schmidt <stefan@openmoko.org> Signed-off-by: NHarald Welte <laforge@openmoko.org> Acked-by: NBen Dooks <ben-linux@fluff.org> Acked-by: NArnaud Patard <arnaud.patard@rtp-net.org> Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
-
由 Randy Dunlap 提交于
The caller is __cpuinit. Also, this code block and its caller are inside #ifdef CONFIG_HOTPLUG_CPU blocks, so this code should reflect that config symbol's usage. WARNING: vmlinux.o(.text+0x4252f): Section mismatch: reference to .init.text: (between 'timer_cpu_notify' and 'msleep') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix section mismatch in hrtimer.c: WARNING: vmlinux.o(.text+0x50c61): Section mismatch: reference to .init.text: (between 'hrtimer_cpu_notify' and 'down_read_trylock') Noticed by Johannes Berg and confirmed by Sam Ravnborg. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
-
由 Alan Cox 提交于
If we get a data URB back from the hardware after we have put the tty to bed we go kaboom. Fortunately all we need to do is process the URB without trying to ram its contents down the throat of an ex-tty. Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
The tc35815-mac platform device used a pci bus number and a devfn to identify its target device, but the pci bus number may vary if some bus-bridges are found. Use irq number which is be unique for embedded controllers. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The JMPRS register on Malta boards keeps a 32-bit CPU-endian value. The readw() function assumes that the value it reads is a little-endian 16-bit number. Therefore, using readw() to obtain the value of the JMPRS register is a mistake. This error leads to incorrect reading of the PCI clock frequency on big-endian during board start-up. Change readw() to __raw_readl(). This was tested by injecting a call to printk() and verifying that the value of the jmpr variable was consistent with current setting of the JP4 "PCI CLK" jumper. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Frank Rowand 提交于
Fix compile warning (which becomes compile error due to -Werror). Type of argument "flags" for spin_lock_irqsave() was incorrect in some functions. Signed-off-by: NFrank Rowand <frank.rowand@am.sony.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 20 1月, 2008 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6由 Russell King 提交于
* 'omap-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: ARM: OMAP1: Fix compile for board-nokia770 ARM: OMAP1: Keymap fix for f-sample and p2-sample
-
由 Dan Williams 提交于
'select' used by config symbol 'INTEL_IOATDMA' refers to undefined symbol 'DCA' Although drivers/dma is currently the only user future drivers outside of drivers/dma may select this option so it is better to add this to arch/arm/Kconfig than move DCA to drivers/dma/Kconfig. Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
r2 is not guaranteed to be preserved over a function call, so relying on it to store the link register over the call to sleep_phys_sp() is unreliable. Store the link register on the stack instead. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rusty Russell 提交于
It was moved to arch/x86/lguest/Kconfig, but I lost the deletion part in a patch suffle. My confused one-liner "fix" to turn it on is also reverted: 84f7466eSigned-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Josef 'Jeff' Sipek 提交于
The i386 and x86_64 arch directories contain nothing but a generated symlink to arch/x86/boot/bzImage when a tree a built. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Anvin <hpa@zytor.com> Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
The PDC202xx older devices do not support ATAPI DMA via the usual interfaces. What documentation I have isn't sufficient to support DMA and it isn't clear if the Windows drivers do this or it is possible at all. (Neither do the drivers/ide old drivers) So turn it ATAPI DMA off, these are disk optimised controllers. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: Fix receiving UD messages with immediate data
-
- 19 1月, 2008 23 次提交
-
-
由 Daniel Walker 提交于
Fix compile for board-nokia770 Signed-off-by: NDaniel Walker <dwalker@mvista.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Vivek Kutal 提交于
Keymap fix for f-sample and p2-sample. Signed-off-by: NVivek Kutal <vivek.kutal@celunite.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (31 commits) Replace cpmac fix dl2k: the rest dl2k: MSCR, MSSR, ESR, PHY_SCR fixes dl2k: BMSR fixes dl2k: ANAR, ANLPAR fixes dl2k: BMCR_t fixes 3c574, 3c515 bitfields abuse sbni endian fixes wan/lmc bitfields fixes dscc4 endian fixes S2io: Fixed synchronization between scheduling of napi with card reset and close atl1: fix frame length bug Documentation: add a guideline for hard_start_xmit method Revert "sky2: remove check for PCI wakeup setting from BIOS" e1000e Kconfig: remove ref to nonexistant docs bonding: Don't hold lock when calling rtnl_unlock bonding: fix lock ordering for rtnl and bonding_rwsem bonding: Fix up parameter parsing bonding: release slaves when master removed via sysfs bonding: fix locking during alb failover and slave removal ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] clarify watchdog operation in documentation [WATCHDOG] Revert "Stop looking for device as soon as one is found"
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: add support for the latest Intel processors to Oprofile
-
由 Rusty Russell 提交于
There's currently no way to turn on Lguest guest support; the planned Kconfig virtualization reorg didn't get into 2.6.25. This was unnoticed because if you already had CONFIG_LGUEST_GUEST=y in your config, it worked. Too bad about new users... Also, the Kconfig help was wrong now the virtio drivers are merged. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
The latest Intel processors (the 45nm ones) have a model number of 23 (old ones had 15); they're otherwise compatible on the oprofile side. This patch adds the new model number to the oprofile code. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andrew Dyer 提交于
It was not clear what the difference is/was between the nowayout feature and the Magic Close feature. Signed-off-by: N"Andrew Dyer" <amdyer@gmail.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Wim Van Sebroeck 提交于
This reverts commit 3ff6eb4a. the !found check in the for loop allready made sure that only one device was found. Signed-Off-By: NPádraig Brady <P@draigBrady.com> Signed-Off-By: NWim Van Sebroeck <wim@iguana.be>
-
由 Matteo Croce 提交于
Please apply this patch since i reverted by mistake the commit 4e3ab47a in 6cd043d9Signed-off-by: NMatteo Croce <technoboy85@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
remove an unused union-with-bitfield of the same sort, add missing conversions in debugging printk Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
same story, different registers... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
broken use of bitfields; FUBAR on big-endian (and not valid C, strictly speaking). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
wn3_config is shared by these cards; the way we deal with it is both bad C (union abuse) and broken on big-endian. For 3c515 it's less serious (ISA cards are quite rare outside of little-endian boxen), but 3c574 is a pcmcia one and that'd better be endian-independent... Fix is the same in both cases. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Sreenivasa Honnur 提交于
- Fixed synchronization between scheduling of napi with card reset and close by moving the enabling and disabling of napi to card up and card down functions respectively instead of open and close. Signed-off-by: NSurjit Reang <surjit.reang@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jay Cliburn 提交于
The driver sets up the hardware to accept a frame with max length equal to MTU + Ethernet header + FCS + VLAN tag, but we neglect to add the VLAN tag size to the ingress buffer. When a VLAN-tagged frame arrives, the hardware passes it, but bad things happen because the buffer is too small. This patch fixes that. Thanks to David Harris for reporting the bug and testing the fix. Tested-by: NDavid Harris <david.harris@cpni-inc.com> Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Matti Linnanvuori 提交于
Add a guideline not to modify SKBs. Signed-off-by: NMatti Linnanvuori <mattilinnanvuori@yahoo.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
This reverts commit 84cd2dfb. Some BIOS's break if Wake On Lan is enabled, and the machine can't boot. Better to have some user's have to call ethtool to enable WOL than to break a single user's boot. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-