Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 19 3月, 2013 1 次提交
  3. 20 2月, 2013 1 次提交
    • K
      xen-blkfront: drop the use of llist_for_each_entry_safe · f84adf49
      由 Konrad Rzeszutek Wilk 提交于 
      Replace llist_for_each_entry_safe with a while loop.

llist_for_each_entry_safe can trigger a bug in GCC 4.1, so it's best
to remove it and use a while loop and do the deletion manually.

Specifically this bug can be triggered by hot-unplugging a disk, either
by doing xm block-detach or by save/restore cycle.

BUG: unable to handle kernel paging request at fffffffffffffff0
IP: [<ffffffffa0047223>] blkif_free+0x63/0x130 [xen_blkfront]
The crash call trace is:
	...
bad_area_nosemaphore+0x13/0x20
do_page_fault+0x25e/0x4b0
page_fault+0x25/0x30
? blkif_free+0x63/0x130 [xen_blkfront]
blkfront_resume+0x46/0xa0 [xen_blkfront]
xenbus_dev_resume+0x6c/0x140
pm_op+0x192/0x1b0
device_resume+0x82/0x1e0
dpm_resume+0xc9/0x1a0
dpm_resume_end+0x15/0x30
do_suspend+0x117/0x1e0

When drilling down to the assembler code, on newer GCC it does
.L29:
        cmpq    $-16, %r12      #, persistent_gnt check
        je      .L30    	#, out of the loop
.L25:
	... code in the loop
        testq   %r13, %r13      # n
        je      .L29    	#, back to the top of the loop
        cmpq    $-16, %r12      #, persistent_gnt check
        movq    16(%r12), %r13  # <variable>.node.next, n
        jne     .L25    	#,	back to the top of the loop
.L30:

While on GCC 4.1, it is:
L78:
	... code in the loop
	testq   %r13, %r13      # n
        je      .L78    #,	back to the top of the loop
        movq    16(%rbx), %r13  # <variable>.node.next, n
        jmp     .L78    #,	back to the top of the loop

Which basically means that the exit loop condition instead of
being:

	&(pos)->member != NULL;

is:
	;

which makes the loop unbound.

Since xen-blkfront is the only user of the llist_for_each_entry_safe
macro remove it from llist.h.

Orabug: 16263164
CC: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      f84adf49
  5. 18 12月, 2012 2 次提交
  7. 27 11月, 2012 1 次提交
  9. 04 11月, 2012 1 次提交
    • R
      xen/blkback: persistent-grants fixes · cb5bd4d1
      由 Roger Pau Monne 提交于 
      This patch contains fixes for persistent grants implementation v2:

 * handle == 0 is a valid handle, so initialize grants in blkback
   setting the handle to BLKBACK_INVALID_HANDLE instead of 0. Reported
   by Konrad Rzeszutek Wilk.

 * new_map is a boolean, use "true" or "false" instead of 1 and 0.
   Reported by Konrad Rzeszutek Wilk.

 * blkfront announces the persistent-grants feature as
   feature-persistent-grants, use feature-persistent instead which is
   consistent with blkback and the public Xen headers.

 * Add a consistency check in blkfront to make sure we don't try to
   access segments that have not been set.
Reported-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NRoger Pau Monne <roger.pau@citrix.com>
[v1: The new_map int->bool had already been changed]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      cb5bd4d1
  11. 30 10月, 2012 1 次提交
    • R
      xen/blkback: Persistent grant maps for xen blk drivers · 0a8704a5
      由 Roger Pau Monne 提交于 
      This patch implements persistent grants for the xen-blk{front,back}
mechanism. The effect of this change is to reduce the number of unmap
operations performed, since they cause a (costly) TLB shootdown. This
allows the I/O performance to scale better when a large number of VMs
are performing I/O.

Previously, the blkfront driver was supplied a bvec[] from the request
queue. This was granted to dom0; dom0 performed the I/O and wrote
directly into the grant-mapped memory and unmapped it; blkfront then
removed foreign access for that grant. The cost of unmapping scales
badly with the number of CPUs in Dom0. An experiment showed that when
Dom0 has 24 VCPUs, and guests are performing parallel I/O to a
ramdisk, the IPIs from performing unmap's is a bottleneck at 5 guests
(at which point 650,000 IOPS are being performed in total). If more
than 5 guests are used, the performance declines. By 10 guests, only
400,000 IOPS are being performed.

This patch improves performance by only unmapping when the connection
between blkfront and back is broken.

On startup blkfront notifies blkback that it is using persistent
grants, and blkback will do the same. If blkback is not capable of
persistent mapping, blkfront will still use the same grants, since it
is compatible with the previous protocol, and simplifies the code
complexity in blkfront.

To perform a read, in persistent mode, blkfront uses a separate pool
of pages that it maps to dom0. When a request comes in, blkfront
transmutes the request so that blkback will write into one of these
free pages. Blkback keeps note of which grefs it has already
mapped. When a new ring request comes to blkback, it looks to see if
it has already mapped that page. If so, it will not map it again. If
the page hasn't been previously mapped, it is mapped now, and a record
is kept of this mapping. Blkback proceeds as usual. When blkfront is
notified that blkback has completed a request, it memcpy's from the
shared memory, into the bvec supplied. A record that the {gref, page}
tuple is mapped, and not inflight is kept.

Writes are similar, except that the memcpy is peformed from the
supplied bvecs, into the shared pages, before the request is put onto
the ring.

Blkback stores a mapping of grefs=>{page mapped to by gref} in
a red-black tree. As the grefs are not known apriori, and provide no
guarantees on their ordering, we have to perform a search
through this tree to find the page, for every gref we receive. This
operation takes O(log n) time in the worst case. In blkfront grants
are stored using a single linked list.

The maximum number of grants that blkback will persistenly map is
currently set to RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST, to
prevent a malicios guest from attempting a DoS, by supplying fresh
grefs, causing the Dom0 kernel to map excessively. If a guest
is using persistent grants and exceeds the maximum number of grants to
map persistenly the newly passed grefs will be mapped and unmaped.
Using this approach, we can have requests that mix persistent and
non-persistent grants, and we need to handle them correctly.
This allows us to set the maximum number of persistent grants to a
lower value than RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST, although
setting it will lead to unpredictable performance.

In writing this patch, the question arrises as to if the additional
cost of performing memcpys in the guest (to/from the pool of granted
pages) outweigh the gains of not performing TLB shootdowns. The answer
to that question is `no'. There appears to be very little, if any
additional cost to the guest of using persistent grants. There is
perhaps a small saving, from the reduced number of hypercalls
performed in granting, and ending foreign access.
Signed-off-by: NOliver Chick <oliver.chick@citrix.com>
Signed-off-by: NRoger Pau Monne <roger.pau@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v1: Fixed up the misuse of bool as int]
      0a8704a5
  13. 21 8月, 2012 1 次提交
    • T
      workqueue: deprecate flush[_delayed]_work_sync() · 43829731
      由 Tejun Heo 提交于 
      flush[_delayed]_work_sync() are now spurious.  Mark them deprecated
and convert all users to flush[_delayed]_work().

If you're cc'd and wondering what's going on: Now all workqueues are
non-reentrant and the regular flushes guarantee that the work item is
not pending or running on any CPU on return, so there's no reason to
use the sync flushes at all and they're going away.

This patch doesn't make any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mattia Dongili <malattia@linux.it>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Avi Kivity <avi@redhat.com>
      43829731
  15. 19 7月, 2012 1 次提交
    • T
      xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op · 89c30f16
      由 Theodore Ts'o 提交于 
      With the changes in the random tree, IRQF_SAMPLE_RANDOM is now a
no-op; interrupt randomness is now collected unconditionally in a very
low-overhead fashion; see commit 775f4b29.  The IRQF_SAMPLE_RANDOM
flag was scheduled to be removed in 2009 on the
feature-removal-schedule, so this patch is preparation for the final
removal of this flag.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
      89c30f16
  17. 12 6月, 2012 1 次提交
    • K
      xen/blkfront: Add WARN to deal with misbehaving backends. · 6878c32e
      由 Konrad Rzeszutek Wilk 提交于 
      Part of the ring structure is the 'id' field which is under
control of the frontend. The frontend stamps it with "some"
value (this some in this implementation being a value less
than BLK_RING_SIZE), and when it gets a response expects
said value to be in the response structure. We have a check
for the id field when spolling new requests but not when
de-spolling responses.

We also add an extra check in add_id_to_freelist to make
sure that the 'struct request' was not NULL - as we cannot
pass a NULL to __blk_end_request_all, otherwise that crashes
(and all the operations that the response is dealing with
end up with __blk_end_request_all).

Lastly we also print the name of the operation that failed.

[v1: s/BUG/WARN/ suggested by Stefano]
[v2: Add extra check in add_id_to_freelist]
[v3: Redid op_name per Jan's suggestion]
[v4: add const * and add WARN on failure returns]
Acked-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      6878c32e
  19. 12 5月, 2012 2 次提交
  21. 07 4月, 2012 1 次提交
  23. 22 3月, 2012 1 次提交
  25. 20 3月, 2012 3 次提交
  27. 05 1月, 2012 1 次提交
    • J
      Xen: consolidate and simplify struct xenbus_driver instantiation · 73db144b
      由 Jan Beulich 提交于 
      The 'name', 'owner', and 'mod_name' members are redundant with the
identically named fields in the 'driver' sub-structure. Rather than
switching each instance to specify these fields explicitly, introduce
a macro to simplify this.

Eliminate further redundancy by allowing the drvname argument to
DEFINE_XENBUS_DRIVER() to be blank (in which case the first entry from
the ID table will be used for .driver.name).

Also eliminate the questionable xenbus_register_{back,front}end()
wrappers - their sole remaining purpose was the checking of the
'owner' field, proper setting of which shouldn't be an issue anymore
when the macro gets used.

v2: Restore DRV_NAME for the driver name in xen-pciback.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      73db144b
  29. 17 12月, 2011 1 次提交
  31. 19 11月, 2011 2 次提交
  33. 13 10月, 2011 4 次提交
  35. 15 7月, 2011 2 次提交
  37. 12 5月, 2011 2 次提交
  39. 09 3月, 2011 1 次提交
  41. 26 2月, 2011 1 次提交
  43. 24 12月, 2010 1 次提交
    • T
      xen: don't use flush_scheduled_work() · 30d65030
      由 Tejun Heo 提交于 
      flush_scheduled_work() is deprecated and scheduled to be removed.
Directly flush info->work instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      30d65030
  45. 16 12月, 2010 1 次提交
  47. 10 11月, 2010 1 次提交
    • C
      block: remove REQ_HARDBARRIER · 02e031cb
      由 Christoph Hellwig 提交于 
      REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
at this point is:

 - various checks inside the block layer.
 - sanity checks in bio based drivers.
 - now unused bio_empty_barrier helper.
 - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
   but Xen really needs to sort out it's barrier situaton.
 - setting of ordered tags in uas - dead code copied from old scsi
   drivers.
 - scsi different retry for barriers - it's dead and should have been
   removed when flushes were converted to FS requests.
 - blktrace handling of barriers - removed.  Someone who knows blktrace
   better should add support for REQ_FLUSH and REQ_FUA, though.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
      02e031cb
  49. 03 11月, 2010 1 次提交
  51. 02 11月, 2010 3 次提交
  53. 22 10月, 2010 1 次提交
  55. 18 10月, 2010 1 次提交