- 30 11月, 2006 40 次提交
-
-
由 Steven Whitehouse 提交于
Four of the sysfs files are unused and can therefore be removed. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This moves the locking for bmap into the bmap function itself rather than using a wrapper function. It also fixes a bug where the boundary flag was set on the wrong bh. Also the flags on the mapped bh are reset earlier in the function to ensure that they are 100% correct on the error path. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Change from GFP_KERNEL to GFP_NOFS as this was causing a slow down when trying to push inodes from cache. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Patrick Caulfield 提交于
The attached patch fixes the DLM config so that it selects the chosen network transport. It should fix the bug where DLM can be left selected when NET gets unselected. This incorporates all the comments received about this patch. Cc: Adrian Bunk <bunk@stusta.de> Cc: Andrew Morton <akpm@osdl.org> Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
RH BZ 211622 The ALTMODE flag can be set in the lock master's copy of the lock but never cleared, so ALTMODE will also be returned in a subsequent conversion of the lock when it shouldn't be. This results in lock_dlm incorrectly switching to the alternate lock mode when returning the result to gfs which then asserts when it sees the wrong lock state. The fix is to propagate the cleared sbflags value to the master node when the lock is requested. QA's d_rwrandirectlarge test triggers this bug very quickly. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Red Hat BZ 211914 The previous patch "[DLM] fix aborted recovery during node removal" was incomplete as discovered with further testing. It set the bit for the RS_LOCKS barrier but did not then wait for the barrier. This is often ok, but sometimes it will cause yet another recovery hang. If it's a new node that also has the lowest nodeid that skips the barrier wait, then it misses the important step of collecting and reporting the barrier status from the other nodes (which is the job of the low nodeid in the barrier wait routine). Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Red Hat BZ 211914 When many nodes are joining a lockspace simultaneously, the dlm gets a quick sequence of stop/start events, a pair for adding each node. dlm_controld in user space sends dlm_recoverd in the kernel each stop and start event. dlm_controld will sometimes send the stop before dlm_recoverd has had a chance to take up the previously queued start. The stop aborts the processing of the previous start by setting the RECOVERY_STOP flag. dlm_recoverd is erroneously clearing this flag and ignoring the stop/abort if it happens to take up the start after the stop meant to abort it. The fix is to check the sequence number that's incremented for each stop/start before clearing the flag. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Red Hat BZ 211914 With the new cluster infrastructure, dlm recovery for a node removal can be aborted and restarted for a node addition. When this happens, the restarted recovery isn't aware that it's doing recovery for the earlier removal as well as the addition. So, it then skips the recovery steps only required when nodes are removed. This can result in locks not being purged for failed/removed nodes. The fix is to check for removed nodes for which recovery has not been completed at the start of a new recovery sequence. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Red Hat BZ 211914 There's a race between dlm_recoverd (1) enabling locking and (2) clearing out the requestqueue, and dlm_recvd (1) checking if locking is enabled and (2) adding a message to the requestqueue. An order of recoverd(1), recvd(1), recvd(2), recoverd(2) will result in a message being left on the requestqueue. The fix is to have dlm_recvd check if dlm_recoverd has enabled locking after taking the mutex for the requestqueue and if it has processing the message instead of queueing it. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Red Hat BZ 213682 If two nodes leave the lockspace (while unmounting the fs in the case of gfs) after one has sent a STATUS message to the other, STATUS/STATUS_REPLY messages will then ping-pong between the nodes when neither of them can find the lockspace in question any longer. We kill this by not sending another STATUS message when we get a STATUS_REPLY for an unknown lockspace. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Red Hat BZ 213684 If a node sends an lkb to the new master (RCOM_LOCK message) during recovery and recovery is then aborted on both nodes before it gets a reply, the res_recover_locks_count needs to be reset to 0 so that when the subsequent recovery comes along and sends the lkb to the new master again the assertion doesn't trigger that checks that counter is zero. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Patrick Caulfield 提交于
The following patch adds a TCP based communications layer to the DLM which is compile time selectable. The existing SCTP layer gives the advantage of allowing multihoming, whereas the TCP layer has been heavily tested in previous versions of the DLM and is known to be robust and therefore can be used as a baseline for performance testing. Signed-off-by: NPatrick Caulfield <pcaulfie@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Russell Cattelan 提交于
Stuffed files only consist of a maximum of (gfs2 block size - sizeof(struct gfs2_dinode)) bytes. Since the gfs2 block size is always less than page size, we will never see a call to stuffed_readpage for anything other than the first page in the file. Signed-off-by: NRussell Cattelan <cattelan@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Russell Cattelan 提交于
The log lock is dropped prior to io submittion, but this exposes a hole in which the log data structures may be going away due to a truncate. Store the buffer head in a local pointer prior to dropping the lock and relay on the buffer_head lock for consitency on the buffer head. Signed-Off-By: NRussell Cattelan <cattelan@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This function wasn't really doing the right thing. There was no need to update the inode size at this point and the updating of the i_blocks field has now been moved to the places where di_blocks is updated. A result of this patch and some those preceeding it is that unlocking a glock is now a much more efficient process, since there is no longer any requirement to copy data from the gfs2 inode into the vfs inode at this point. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Since the inode number is constant, we don't need to keep updating it everytime we refresh the other inode fields. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
We were setting the inode flags from GFS2's flags far too often, even when they couldn't possibly have changed. This patch reduces the amount of flag setting going on so that we do it only when the inode is read in or when the flags have changed. The create case is covered by the "when the inode is read in" case. This also fixes a bug where we didn't set S_SYNC correctly. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This fixes a race between the glock and the page lock encountered during truncate in gfs2_readpage and gfs2_prepare_write. The gfs2_readpages function doesn't need the same fix since it only uses a try lock anyway, so it will fail back to gfs2_readpage in the case of a potential deadlock. This bug was spotted by Russell Cattelan. Cc: Russell Cattelan <cattelan@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
There is no way to set the GL_DUMP flag, and in any case the same thing can be done with systemtap if required for debugging, so this removes it. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The meta_header for an ondisk rgrp never changes, so there is no point copying it in and back out to disk. Also there is no reason to keep a copy for each rgrp in memory. The code already checks to ensure that the header is correct before it calls the routine to copy the data in, so that we don't even need to check whether its correct on disk in the functions in ondisk.c Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
We don't need to use endian conversions for 0 initialisations when creating a new on-disk inode. Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This shrinks the size of the gfs2_inode by 8 bytes by replacing the version counter with a one bit valid/invalid flag. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This is almost never used. Its there for backward compatibility with GFS1. It doesn't need its own field since it can always be calculated from the inode mode & flags. This saves a bit more space in the gfs2_inode. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Remove the di_[amc]time fields and use inode->i_[amc]time fields instead. This saves 24 bytes from the gfs2_inode. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Remove the di_nlink field in favour of inode->i_nlink and update the nlink handling to use the proper macros. This saves 4 bytes. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Remove duplicate di_uid/di_gid fields in favour of using inode->i_uid/inode->i_gid instead. This saves 8 bytes. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This removes the duplicate di_mode field in favour of using the inode->i_mode field. This saves 4 bytes. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This removes the device numbers from this structure by using inode->i_rdev instead. It also cleans up the code in gfs2_mknod. It results in shrinking the gfs2_inode by 8 bytes. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The metadata header doesn't need to be stored in the incore struct gfs2_inode since its constant, and this patch removes it. Also, there is already a field for the inode's number in the struct gfs2_inode, so we don't need one in struct gfs2_dinode_host as well. This saves 28 bytes of space in the struct gfs2_inode. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Change argument for gfs2_dinode_print in order to prepare for removal of duplicate fields between struct inode and struct gfs2_dinode_host. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
gfs2_dinode_in() is only ever called from one place, so move it to that place (in inode.c) and make it static. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This is a preliminary patch to enable the removal of fields in gfs2_dinode_host which are duplicated in struct inode. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Everywhere this was called, a struct gfs2_inode was available, but despite that, it was always called with a struct gfs2_dinode as an argument. By making this change it paves the way to start eliminating fields duplicated between the kernel's struct inode and the struct gfs2_dinode. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-