- 23 2月, 2010 4 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Reimundo Heluani 提交于
Add support for Macbook Air 2,1 (late 2008) internal speaker and headphones. Create a "mba21" model for snd-hda-intel. Signed-off-by: NReimundo Heluani <rheluani@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Seth Heasley 提交于
This patch enables snoop, eliminating static during playback. This patch supersedes the previous Cougar Point audio patch. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The channel mode definitions for macmini3 model are identical with mb5. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 2月, 2010 5 次提交
-
-
由 Paul Menzel 提交于
With PulseAudio and an application accessing an input device like `gnome-volume-manager` both have high CPU load as reported in [1]. Loading `snd-hda-intel` with `position_fix=1` fixes this issue. Therefore add a quirk for ASUS M2V-MX SE. The only downside is, when now exiting for example MPlayer when it is playing an audio file a high pitched sound is outputted by the speaker. $ lspci -vvnn | grep -A10 Audio 20:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10) Subsystem: ASUSTeK Computer Inc. Device [1043:8290] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel [1] http://sourceforge.net/mailarchive/forum.php?thread_name=1265550675.4642.24.camel%40mattotaupa&forum_name=alsa-userSigned-off-by: NPaul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Paul Menzel 提交于
Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use the standard unsol_event callback with each setup callback for IntelMac models with Realtek ALC885 codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Luke Yelavich 提交于
BugLink: https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/343989 Add a model quirk for the NVIDIA based Macmini hardware, aka Macmini 3,1. The pinout is almost identical to the mb5 quirk, except for no microphone and the line-in mixer controls being on a different index. Everything works in 2ch mode, but as I am not sure what needs to be changed for 6ch mode, or whether the Mac Mini's chip supports 6ch mode, I have simply duplicated the code from the mb5 quirk for the mac mini chmode management. The new model parameter for this quirk is "macmini3". Signed-off-by: NLuke Yelavich <luke.yelavich@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel T Chen 提交于
BugLink: https://bugs.launchpad.net/bugs/524948 The OR has verified that the existing model=laptop-eapd quirk does not function correctly but instead needs model=3stack. Make this change so that manual corrections to module-init-tools file(s) are not required. Reported-by: NLasse Havelund <lasse@havelund.org> CC: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2010 1 次提交
-
-
由 Greg Alexander 提交于
Add patch for the Conexant 5066 HDA codec to support the Lenovo IdeaPad U150 Signed-off-by: NGreg Alexander <greigs@galexander.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 2月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
-
由 Jody Bruchon 提交于
On my AMD780V chipset, hda_intel.c can crash the kernel with a divide by zero for as-yet unknown reasons. A simple check for zero prevents it, though the problem that causes it remains. Since the workaround is harmless and won't affect anyone except victims of this bug, it should be safe; moreover, because this crash can be triggered by a user-mode application, there are denial of service implications on the systems affected by the bug without the patch. Signed-off-by: NJody Bruchon <jody@nctritech.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 2月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
The previous commit caused a regression on HP laptops with 92HD83x/88x codecs. The default polarity of mute-LED GPIO is inverted on these devices. Reference: Novell bnc#578190 https://bugzilla.novell.com/show_bug.cgi?id=578190Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 2月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
We have now a better mute-LED GPIO detection, and no need to assign the values statically per model option. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Merge the mute-LED status callback function for both IDT 92HD7x and 8x codecs to one function. Also it's changed to check all DACs, and called in the initialization to sync with the current status. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The GPIO pin number for the mute LED control on HP laptops can be determined more easily by checking the number of available GPIO pins of the codec chip. On a small package with up to 3 GPIOs, GPIO 0 is used while GPIO 3 is used for others. This fixes the missing mute GPIO for some HP laptops with new codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 2月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
-
由 Maxim Levitsky 提交于
This renames the interrupt name in /proc/interrupt. HDA Intel -> hda_intel This also eliminates space from the name, probably helping some parsers. Don't think anybody depends on this name in userspace Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Maxim Levitsky 提交于
My sound codec seems sometimes (very rarely) to omit interrupts (ALC268) However, interrupt mode still works. Thus if we get timeout, poll the codec once. If we get 3 such polls in a row, then switch to polling mode. This patch is maybe an bandaid, but this might be a workaround for hardware bug. Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 2月, 2010 5 次提交
-
-
由 Kailang Yang 提交于
- Add support for ALC665 - Add more ASUS model - Modify common patch for ALC272 ALC273 ALC661 ALC662 ALC663 ALC665 Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
- Add new models ALC269VB_AMIC ALC269VB_DMIC - Add alc269vb_laptop_dmic_setup The record source index Dmic is 0x6 for ALC269VB. - Change eeepc words for ALC269 - Modify init_verb tables of patch_alc269 patch_alc662 patch_alc882 - Modify common patch for ALC270 ALC269VB ALC275 Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
The default values are no need to be set in init_verbs. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Charles Chin 提交于
This patch fixes docking output support for IDT 92HD81/83/88 family codecs. Typically one of ports 0xE or 0xF is used for docking output, while only port 0xF is common on all the three codec families. We don't want the pin to select the analog mixer here. Signed-off-by: NCharles Chin <Charles.Chin@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 1月, 2010 5 次提交
-
-
由 Charles Chin 提交于
Signed-off-by: NCharles Chin <Charles.Chin@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
This patch adds HP mute LED support for IDT 92HD81/3 family of the codecs. Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The amp used for the mic input on HP Compaq F700 with Cxt5051 codec has no multiple inputs, thus its index should be 0 instead of 1. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Define the constant rather in the common header file. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wei Ni 提交于
In hda_codec.c, it has define "[HDA_PCM_TYPE_HDMI] = { 3, 7, 8, 9, -1 },", it support up to device 9 for HDMI. But in hda_intel.c, it only define AZX_MAX_PCMS as 8. So if it have 4 hdmi codecs, when run azx_attach_pcm_stream(), it will show error "Invalid PCM device number 8", and "... number 9", and return "-EINVAL". We should change the AZX_MAX_PCMS to 10. Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 1月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Allow the override of vendor-id, subsystem-id, revision-id and chip name via patch loading. Updated the document, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Sid Boyce reported that his machine locks up without enable_msi=0 option. This looks like another ASUS mobo with Nvidia combo. Reported-by: NSid Boyce <sboyce@blueyonder.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 1月, 2010 1 次提交
-
-
由 Wei Ni 提交于
In azx_stream_start() and azx_stream_stop(), it use azx_readb/azx_writeb to read/write SIE, it just enable/disable 8 streams. But according to the HDA spec, it support 30 streams, and the new HDA controller will support more then 8 streams. So we should use azx_readl/azx_writel to read/write SIE. Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 1月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
The COEF setup for model=auto seems problematic on some laptops, resulting in the silent speaker output. Better to disable it for now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The output of COEF index/value in the proc file for Realtek codecs is rather useless since the value varies together with the index. Let's get rid of it again. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Łukasz Wojniłowicz 提交于
Now one can choose speaker configuration in e.g. PulseAudio mixer Signed-off-by: NŁukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 1月, 2010 5 次提交
-
-
由 Takashi Iwai 提交于
The HP pin (0x16) control has to be changed dynamically depending on the master volume switch as well as the speaker pin (0x1a). Otherwise the headphone still sounds with master off. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed the wrongly set up for SPDIF output on Conexant 5051 codec. It must point to the audio out widget instead of a pin. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Initialize the mic ports B & C on Conexant 5051 codec dynamically according to the mic jack detection, instead of static init arrays. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
All cx5051 codec models have the same Master playback mixer definitions. Merge them together. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the support for Toshiba Satellite M300 with Conexant 5051 codec. Since the laptop has no port C connection and the pin reports always the jack sense true, we need to ignore port-C unsol event. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-