- 08 5月, 2014 10 次提交
-
-
由 Andrea Merello 提交于
CTS protection was not working properly because the HW needs RTS flag to be asserted, and it need also RTS duration field to be filled with CTS-to-self duration. This patch makes the driver to do this. Signed-off-by: NAndrea Merello <andrea.merello@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrea Merello 提交于
CTS protection was not working properly because the HW still need RTS flag to be asserted, and it need also RTS rate field to be set with CTS-to-self rate and RTS duration field to be filled with CTS-to-self duration. This patch makes the driver to do this. Signed-off-by: NAndrea Merello <andrea.merello@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrea Merello 提交于
This patch make it possible to mac80211 to know whether a frame has been received with short preamble. It simply checks for the "splcp" flag in the RX status descriptor, and eventually set RX_FLAG_SHORTPRE in mac80211 rx status structure. Signed-off-by: NAndrea Merello <andrea.merello@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrea Merello 提交于
This patch make it possible to mac80211 to know whether a frame has been received with short preamble. It simply checks for the "splcp" flag in the RX status descriptor, and eventually set RX_FLAG_SHORTPRE in mac80211 rx status structure. Signed-off-by: NAndrea Merello <andrea.merello@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
Add a new platform data flag "use_eeprom" that indicates that the eeprom found on the card itself should be used instead of the one present in the platform data. This allows to override the MAC address of a PCI card while preserving the eeprom data from the card itself. The default behavior is preserved. Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds support to populate HT operatation IE in TDLS setup confirm command. This is required for setting wider bandwidths for TDLS operations. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds code to disable TDLS link upon reception of TDLS teardown event from peer. Teardown event can happen either because of TDLS teardown packet from peer or internal timeout configured during TDLS setup. Event is propogated to cfg80211 so that userspace application can take appropriate action. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
This patch adds configuration timeout for TDLS link. This is configuered at the time of TDLS link configuration. If TDLS link is inactive for more than timeout, FW will tear this link. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Eyal Shapira 提交于
After fixes to the rs algorithm reenable MCS9. Signed-off-by: NEyal Shapira <eyalx.shapira@intel.com> Reviewed-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
- 07 5月, 2014 28 次提交
-
-
由 Emmanuel Grumbach 提交于
Since the declaration of iwl_mvm_fw_error_rxf_dump and iwl_mvm_fw_error_sram_dump is under ifdef CONFIG_IWLWIFI_DEBUGFS, do the same for their implementation. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Emmanuel Grumbach 提交于
This allows mac80211 to flush the Tx queues before it sends critical management frames. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Andrei Otcheretianski 提交于
Publish WIPHY_FLAG_HAS_CHANNEL_SWITCH if the fw supports newly introduced IWL_UCODE_TLV_API_CSA_FLOW. When CSA starts, save the switching vif inside mvm and during the CSA period configure fw with a new beacon after each beacon transmission in order to update the csa counters. Also, handle correctly the CSA unbind-bind flow which is triggered by mac80211 when the actual channel switch happens. Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: NLuciano Coelho <luciano.coelho@intel.com> Reviewed-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eliad Peller 提交于
Some ampdu actions change queues by direct target access. Since the bus is disabled in d0i3, make sure to exit d0i3 before handling these actions. Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Reviewed-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Johannes Berg 提交于
When a firmware error occurs, capture the last 32 commands (which are still in memory) in the error dump debugfs file. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Felix Fietkau 提交于
The SREV register in the WMAC register space does not contain the chip revision, so it needs to be passed in from the kernel. With an updated kernel, this fixes tx gain table selection. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andy Spencer 提交于
With certain hardware combinations the poll interval is exceeded before initialization completes. Tested on a MacBookPro10,1 using a Sabrent USB-A11N USB adapter. Signed-off-by: NAndy Spencer <andy753421@ucla.edu> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rajkumar Manoharan 提交于
This will enable AP mode to change channel width dynamically based on 20/40 intolerance report sent by associated client. Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Greear 提交于
A similar patch fixed crashes seen on an ath9k system when testing against a broken ath10k AP. This patch is slightly less protective, but probably will do the job and is less redundant. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Merge branch 'rfkill-gpio-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
-
由 Johannes Berg 提交于
This variable always tracks a constant value (256) so there's no need to have it. Removing it simplifies code generation, reducing the .text size (by about 240 bytes on x86-64.) Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Johannes Berg 提交于
The 'reset' argument is clearly a boolean, so use bool instead of u8 with 0/1 values. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Johannes Berg 提交于
If there's no LED on the system, it doesn't make a lot of sense to include close to 4k of LED-related code (mostly in mac80211), so instead of forcing LED support into the kernel, don't build iwlwifi/mac80211 LED support if there's no LED class support. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Reviewed-by: NEliadX Peller <eliad@wizery.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eran Harary 提交于
The old code checks if hw_section_num is valid while the right thing to do is to check if section[hw_section_num].data is valid. Signed-off-by: NEran Harary <eran.harary@intel.com> Reviewed-by: NLiad Kaufman <liad.kaufman@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eran Harary 提交于
For family 8000 products, the driver should take the MAC address from the mac_override section and only if this section is empty it should take it from the HW section. Signed-off-by: NEran Harary <eran.harary@intel.com> Reviewed-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eran Harary 提交于
Read first the nvm sections from the OTP, then read the nvm sections from the external file and override the OTP values (if there were any values in the OTP). Signed-off-by: NEran Harary <eran.harary@intel.com> Reviewed-by: NDor Shaish <dor.shaish@intel.com> Reviewed-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eran Harary 提交于
A few devices aren't allowed to be powered up at driver load time. Add "power_up_nic_in_init" flag to iwl_cfg structure to customize the load flow according to the device. Signed-off-by: NEran Harary <eran.harary@intel.com> Reviewed-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eran Harary 提交于
OTP size changed in family 7000 and in family 8000. Signed-off-by: NEran Harary <eran.harary@intel.com> Reviewed-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Johannes Berg 提交于
There's no need to use a variable just to return the result of another function call at the end of a function, remove it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eyal Shapira 提交于
The expected throughput table used when estimating a new column depends on the channel bandwidth. When switching from legacy to siso or mimo the wrong expected throughput table was used as it was chosen based on the the channel bandwidth in legacy which is always 20Mhz. Instead it should be chosen based on the current sta bandwidth which could be also 40Mhz or 80Mhz. When enabling MCS9 this bug leads to a problem where the max expected throughput of the siso or mimo column is 0 as MCS9 isn't supported in 20Mhz. This in turns prevents switching to siso or mimo. Fix this by using the sta bandwidth when deciding which table to choose. Signed-off-by: NEyal Shapira <eyalx.shapira@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eyal Shapira 提交于
TPC is a power optimization which should only be attempted when we're in the "stay in column" state after we've locked onto an optimal rate. Signed-off-by: NEyal Shapira <eyalx.shapira@intel.com> Reviewed-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eyal Shapira 提交于
Currently we were checking only if the driver power_scheme is set to CAM. TPC shouldn't be enabled also when disabling powersave on the interface (e.g. iw wlan0 set power_save off) which may occur even if power_scheme wasn't set to CAM. Signed-off-by: NEyal Shapira <eyalx.shapira@intel.com> Reviewed-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eyal Shapira 提交于
rs_get_best_rate determines the optimal rate to try in a new Tx column. Currently we were sometimes trying a too high rate which would lead us to fail and avoid switching to the new column despite it having a potential to be better. Change the logic to try and find the first rate which would exceed the current actual throughput or be more aggressive if the success ratio is good. Signed-off-by: NEyal Shapira <eyalx.shapira@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Eyal Shapira 提交于
Adding more options in the search cycle causes longer search cycles with additional wondering off to non optimal Tx configurations. Reduce the Tx configurations searched to improve throughput in non optimal attenuations. Signed-off-by: NEyal Shapira <eyalx.shapira@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Emmanuel Grumbach 提交于
-
由 Emmanuel Grumbach 提交于
-
由 Emmanuel Grumbach 提交于
My bad - I forgot to update this when sending the patch upstream. Fixes: 87d5e415 ("iwlwifi: mvm: rs: reinit rs if no tx for a long time") Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Emmanuel Grumbach 提交于
The commit below introduced a bug in the validity bits in init. Due to that, all the Coex mechanism stopped sending kills to the BT side. Fix that. Fixes: b9fae2d5 ("iwlwifi: mvm: BT Coex add support for Co-running block") Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 01 5月, 2014 2 次提交
-
-
由 Jahnavi Meher 提交于
Signed-off-by: NJahnavi Meher <jahnavi.meher@redpinesignals.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rajkumar Manoharan 提交于
Adjust FIR filter co-efficients to improve EVM for 11b rates. Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-