- 05 8月, 2010 1 次提交
-
-
由 Abhilash Kesavan 提交于
Following is added for the CF-ATA driver: - Platform data strucure instantiation - Platform device enabling code - Addition of cfcon clock - Platform-specific gpio setup code Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 28 5月, 2010 1 次提交
-
-
由 Thomas Abraham 提交于
Add the USB OTG HCLK clock to the list of clocks to be registered during initialization. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 18 5月, 2010 1 次提交
-
-
由 Maurus Cuelenaere 提交于
This adds the xusbxti clock to S3C64XX platform. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 14 5月, 2010 3 次提交
-
-
由 Jassi Brar 提交于
Declare 'audio-bus' clock for IISv4 controller of S3C6410. Even though the name is same as that for IISv3, the id is set to -1(just one instance of the controller is available) which helps always fetch the correct clock. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jassi Brar 提交于
Declare possible sources of CLKAUDIO[2]/audio-bus for IISv4 controller. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jassi Brar 提交于
Declare the source of clock provided at Xi2sCDCLK2 pin for IISv4 controller. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 24 2月, 2010 1 次提交
-
-
由 Jassi Brar 提交于
[Updated the device ID to -1 since there's only one IISv4 device but the S3C clock API tries to match based on the ID of the requesting device (and not the name) -- broonie.] Signed-Off-by: NJassi Brar <jassi.brar@samsung.com> [ben-linux@fluff.org: Fixed Jassi's lastname] Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 21 2月, 2010 4 次提交
-
-
由 Ben Dooks 提交于
Turn the init sequence of s3c24xx_register_baseclocks(xtal); s3c64xx_register_clocks(); s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK); into a single call as this is now contained within one file. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Merge plat-s3c64xx/s3c6400-clock.c mach-s3c64xx/clock.c placing all the clock code into one place. Note, no effort is made in this patch to squash the init functions together. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the core S3C64XX support to mach-s3c64xx as it is unlikely to be used outside of this directory. Also move the SoC header files in with it. This includes the clock, cpu, cpufreq, dma, gpiolib and pll support. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the register and GPIO definition files from plat-s3c64xx into the machine include direcotry as they are unlikely to be reused outside mach-s3c64xx. This move includes removing the empty <mach/regs-clock.h> and replacing it with the <plat/regs-clock.h> implementation. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 18 1月, 2010 1 次提交
-
-
由 Jassi Brar 提交于
Defined special 48MHz clock sources for SPI-0,1. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 15 1月, 2010 1 次提交
-
-
由 Ben Dooks 提交于
Add s3c_register_clocks() to register an array of clocks, printing an error message if there is a problem. Replace all points in the code where this could be used. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 22 6月, 2009 1 次提交
-
-
由 Peter Korsgaard 提交于
The usb-host clock was using the wrong define (the SCLK enable for the usb-host-bus) to change the HCLK register instead of the HCLK_UHOST bit. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 07 5月, 2009 2 次提交
-
-
由 Mark Brown 提交于
Add missing DMA controller block clocks. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Werner Almesberger 提交于
Add doubled HCLK to S3C64xx. Signed-off-by: NWerner Almesberger <werner@openmoko.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 27 2月, 2009 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 19 12月, 2008 1 次提交
-
-
由 Ben Dooks 提交于
As per Russell King's last review comment, find and remove all unnecessary includes of <linux/delay.h> in the files that do not need them. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 16 12月, 2008 4 次提交
-
-
由 Ben Dooks 提交于
The S3C64XX timer is running at the wrong rate due to the assumptions made in the timer initialisation about the way the pwm dividers work. This means that time on the S3C64XX runs twice as fast as it should. Fix the problem by moving to using the clk framework to setup the pwm timer clock muxes, as the pwm-clock code has all the necessary knowledge of how the timer clock inputs are routed. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add apropriate enable call for clk_48m. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add the PLL clock initialisation and clock registration and include the clocks sourced via CLKDIVx for most of the on-chip peripherals. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add the initial clocks definitions for the s3c6400 and s3c6410. Move the epll and ext clock from the s3c2443 support into the common code. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-