- 28 10月, 2016 1 次提交
-
-
由 Jiri Olsa 提交于
perf/core: Protect PMU device removal with a 'pmu_bus_running' check, to fix CONFIG_DEBUG_TEST_DRIVER_REMOVE=y kernel panic CAI Qian reported a crash in the PMU uncore device removal code, enabled by the CONFIG_DEBUG_TEST_DRIVER_REMOVE=y option: https://marc.info/?l=linux-kernel&m=147688837328451 The reason for the crash is that perf_pmu_unregister() tries to remove a PMU device which is not added at this point. We add PMU devices only after pmu_bus is registered, which happens in the perf_event_sysfs_init() call and sets the 'pmu_bus_running' flag. The fix is to get the 'pmu_bus_running' flag state at the point the PMU is taken out of the PMU list and remove the device later only if it's set. Reported-by: NCAI Qian <caiqian@redhat.com> Tested-by: NCAI Qian <caiqian@redhat.com> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161020111011.GA13361@kravaSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 19 10月, 2016 8 次提交
-
-
由 Lukasz Odzioba 提交于
Although KNL does support C1,C6,PC2,PC3,PC6 states, the patch only supports C6,PC2,PC3,PC6, because there is no counter for C1. C6 residency counter MSR on KNL has a different address than other platforms which is handled as a new quirk flag. Signed-off-by: NLukasz Odzioba <lukasz.odzioba@intel.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bp@suse.de Cc: dave.hansen@linux.intel.com Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1475598386-19597-1-git-send-email-lukasz.odzioba@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs由 Linus Torvalds 提交于
Pull f2fs bugfix from Jaegeuk Kim: "This fixes a bug which referenced the wrong pointer, sum_page, in f2fs_gc. It was newly introduced in 4.9-rc1. * tag 'for-f2fs-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: fix wrong sum_page pointer in f2fs_gc
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes, plus hw-enablement changes: - fix persistent RAM handling - remove pkeys warning - remove duplicate macro - fix debug warning in irq handler - add new 'Knights Mill' CPU related constants and enable the perf bits" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add Knights Mill CPUID perf/x86/intel/rapl: Add Knights Mill CPUID perf/x86/intel: Add Knights Mill CPUID x86/cpu/intel: Add Knights Mill to Intel family x86/e820: Don't merge consecutive E820_PRAM ranges pkeys: Remove easily triggered WARN x86: Remove duplicate rtit status MSR macro x86/smp: Add irq_enter/exit() in smp_reschedule_interrupt()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixlet from Ingo Molnar: "Remove an unused variable" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Remove unused but set variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fix from Ingo Molnar: "Fix a crash that can trigger when racing with CPU hotplug: we didn't use sched-domains data structures carefully enough in select_idle_cpu()" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix sched domains NULL dereference in select_idle_sibling()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Four tooling fixes, two kprobes KASAN related fixes and an x86 PMU driver fix/cleanup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf jit: Fix build issue on Ubuntu perf jevents: Handle events including .c and .o perf/x86/intel: Remove an inconsistent NULL check kprobes: Unpoison stack in jprobe_return() for KASAN kprobes: Avoid false KASAN reports during stack copy perf header: Set nr_numa_nodes only when we parsed all the data perf top: Fix refreshing hierarchy entries on TUI
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Ingo Molnar: "Two fixes: - a file locks fix (missing critical section, bug introduced in this merge window) - an x86 down_write() stack frame annotation" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking, fs/locks: Add missing file_sem locks locking/rwsem/x86: Add stack frame dependency for ____down_write()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Ingo Molnar: "Three irqchip driver fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gicv3: Handle loop timeout proper irqchip/jcore: Fix lost per-cpu interrupts irqchip/eznps: Acknowledge NPS_IPI before calling the handler
-
- 18 10月, 2016 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull misc fixes from Ingo Molnar: "A CPU hotplug debuggability fix and three objtool false positive warnings fixes for new GCC6 code generation patterns" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Use distinct name for cpu_hotplug.dep_map objtool: Skip all "unreachable instruction" warnings for gcov kernels objtool: Improve rare switch jump table pattern detection objtool: Support '-mtune=atom' stack frame setup instruction
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394由 Linus Torvalds 提交于
Pull firewire fixlet from Stefan Richter: "IEEE 1394 subsystem patch: catch an initialization error in the packet sniffer nosy" * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: nosy: do not ignore errors in ioremap_nocache()
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Just had a couple of amdgpu fixes and one core fix I wanted to get out early to fix some regressions. I'm sure I'll have more stuff this week for -rc2" * tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux: (22 commits) drm: Print device information again in debugfs drm/amd/powerplay: fix bug stop dpm can't work on Vi. drm/amd/powerplay: notify smu no display by default. drm/amdgpu/dpm: implement thermal sensor for CZ/ST drm/amdgpu/powerplay: implement thermal sensor for CZ/ST drm/amdgpu: disable smu hw first on tear down drm/amdgpu: fix amdgpu_need_full_reset (v2) drm/amdgpu/si_dpm: Limit clocks on HD86xx part drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amdgpu: potential NULL dereference in debugfs code drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amd/powerplay: fix static checker warnings in iceland_smc.c drm/radeon: change vblank_time's calculation method to reduce computational error. drm/amdgpu: change vblank_time's calculation method to reduce computational error. drm/amdgpu: clarify UVD/VCE special handling for CG drm/amd/amdgpu: enable clockgating only after late init drm/radeon: allow TA_CS_BC_BASE_ADDR on SI drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init drm/amdgpu/gfx8: fix CGCG_CGLS handling drm/radeon: fix modeset tear down code ...
-
由 Peter Zijlstra 提交于
I overlooked a few code-paths that can lead to locks_delete_global_locks(). Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NJeff Layton <jlayton@poochiereds.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bruce Fields <bfields@fieldses.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-fsdevel@vger.kernel.org Cc: syzkaller <syzkaller@googlegroups.com> Link: http://lkml.kernel.org/r/20161008081228.GF3142@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Josh Poimboeuf 提交于
Arnd reported the following objtool warning: kernel/locking/rwsem.o: warning: objtool: down_write_killable()+0x16: call without frame pointer save/setup The warning means gcc placed the ____down_write() inline asm (and its call instruction) before the frame pointer setup in down_write_killable(), which breaks frame pointer convention and can result in incorrect stack traces. Force the stack frame to be created before the call instruction by listing the stack pointer as an output operand in the inline asm statement. Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1188b7015f04baf361e59de499ee2d7272c59dce.1476393828.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Junjie Mao 提交于
Fixes: 4246a0b6 ("block: add a bi_error field to struct bio") Signed-off-by: NJunjie Mao <junjie.mao@enight.me> Acked-by: NDavid Sterba <dsterba@suse.cz> Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
pkey_set() and pkey_get() were syscalls present in older versions of the protection keys patches. The syscall number definitions were inadvertently left in place. This patch removes them. I did a git grep and verified that these are the last places in the tree that these appear, save for the protection_keys.c tests and Documentation. Those spots talk about functions called pkey_get/set() which are wrappers for the direct PKRU instructions, not the syscalls. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: mgorman@techsingularity.net Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Fixes: f9afc619 ("x86: Wire up protection keys system calls") Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
pkey_set() and pkey_get() were syscalls present in older versions of the protection keys patches. They were fully excised from the x86 code, but some cruft was left in the generic syscall code. The C++ comments were intended to help to make it more glaring to me to fix them before actually submitting them. That technique worked, but later than I would have liked. I test-compiled this for arm64. Fixes: a60f7b69 ("generic syscalls: Wire up memory protection keys syscalls") Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Cc: linux-arch@vger.kernel.org Cc: mgorman@techsingularity.net Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2016 11 次提交
-
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo-20161017' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix handling of NUMA nodes in perf.data files (Jiri Olsa) - Fix scrolling when refreshing 'perf top --tui --hierarchy' entries (Namhyung Kim) - Fix building of JIT support on Ubuntu 16.04 (Anton Blanchard) - Fix handling of events including .c and .o, that were being treated as BPF scripts instead of vendor ones (Wang Nan) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Anton Blanchard 提交于
When building on Ubuntu 16.04, I get the following error: Makefile:49: *** the openjdk development package appears to me missing, install and try again. Stop. The problem is that update-java-alternatives has multiple spaces between fields, and cut treats each space as a new delimiter: java-1.8.0-openjdk-ppc64el 1081 /usr/lib/jvm/java-1.8.0-openjdk-ppc64el Fix this by using awk, which handles this fine. Signed-off-by: NAnton Blanchard <anton@samba.org> Reviewed-by: NStephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1476325243-15788-1-git-send-email-anton@ozlabs.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Wang Nan 提交于
This patch helps with Sukadev's vendor event tree where such events can happen. >From Andi Kleen: Any event including a .c/.o/.bpf currently triggers BPF compilation or loading and then an error. This can happen for some Intel vendor events, which cannot be used. This patch fixes this problem by forbidding BPF file patch containing '{', '}' and ',', make sure flex consumes the leading '{', instead of matching it using a BPF file path. Tested result: $ perf stat -e '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' -a -I 1000 invalid or unsupported event: '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' Run 'perf list' for a list of valid events (as expected, interperted as event) $ perf stat -e 'aaa.c' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory (as expected, interpreted as BPF source) $ perf stat -e 'aaa.ccc' -a -I 1000 invalid or unsupported event: 'aaa.ccc' (as expected, interpreted as event) $ perf stat -e '{aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{aaa.c}' <SKIP> (as expected, interpreted as BPF source) $ perf stat -e '{cycles,aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{cycles,aaa.c}' (as expected, interpreted as BPF source) Signed-off-by: NWang Nan <wangnan0@huawei.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Reported-by: NAndi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1475900185-37967-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Tobias Klauser 提交于
Remove the set but unused variable base in alarm_clock_get to fix the following warning when building with 'W=1': kernel/time/alarmtimer.c: In function ‘alarm_timer_create’: kernel/time/alarmtimer.c:545:21: warning: variable ‘base’ set but not used [-Wunused-but-set-variable] Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20161017094702.10873-1-tklauser@distanz.chSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Piotr Luc 提交于
Add Knights Mill (KNM) to the list of CPUIDs supported by PMU. Signed-off-by: NPiotr Luc <piotr.luc@intel.com> Reviewed-by: NDave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161012182758.2925-1-piotr.luc@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Piotr Luc 提交于
Add Knights Mill (KNM) to the list of CPUIDs supported by rapl. Signed-off-by: NPiotr Luc <piotr.luc@intel.com> Reviewed-by: NDave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161012182725.2701-1-piotr.luc@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Piotr Luc 提交于
Add Knights Mill (KNM) to the list of CPUIDs supported by PMU. Signed-off-by: NPiotr Luc <piotr.luc@intel.com> Reviewed-by: NDave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161012182634.2462-1-piotr.luc@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Piotr Luc 提交于
Add CPUID of Knights Mill (KNM) processor to Intel family list. Signed-off-by: NPiotr Luc <piotr.luc@intel.com> Reviewed-by: NDave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161012180520.30976-1-piotr.luc@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Daniel Vetter 提交于
I was a bit over-eager in my cleanup in commit 95c081c1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jun 21 10:54:12 2016 +0200 drm: Move master pointer from drm_minor to drm_device Noticed by Chris Wilson. Fixes: 95c081c1 ("drm: Move master pointer from drm_minor to drm_device") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Tested-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Fixes for radeon and amdgpu for 4.9: - allow an additional reg in the SI reg checker - fix thermal sensor readback on CZ/ST - misc bug fixes * 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amd/powerplay: fix bug stop dpm can't work on Vi. drm/amd/powerplay: notify smu no display by default. drm/amdgpu/dpm: implement thermal sensor for CZ/ST drm/amdgpu/powerplay: implement thermal sensor for CZ/ST drm/amdgpu: disable smu hw first on tear down drm/amdgpu: fix amdgpu_need_full_reset (v2) drm/amdgpu/si_dpm: Limit clocks on HD86xx part drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amdgpu: potential NULL dereference in debugfs code drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amd/powerplay: fix static checker warnings in iceland_smc.c drm/radeon: change vblank_time's calculation method to reduce computational error. drm/amdgpu: change vblank_time's calculation method to reduce computational error. drm/amdgpu: clarify UVD/VCE special handling for CG drm/amd/amdgpu: enable clockgating only after late init drm/radeon: allow TA_CS_BC_BASE_ADDR on SI drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init drm/amdgpu/gfx8: fix CGCG_CGLS handling drm/radeon: fix modeset tear down code drm/radeon: fix up dp aux tear down (v2) ...
-
- 16 10月, 2016 12 次提交
-
-
由 Dan Carpenter 提交于
Smatch complains that we don't check "event->ctx" consistently. It's never NULL so we can just remove the check. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kernel-janitors@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dan Williams 提交于
Commit: 917db484 ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation") ... fixed up the broken manipulations of max_pfn in the presence of E820_PRAM ranges. However, it also broke the sanitize_e820_map() support for not merging E820_PRAM ranges. Re-introduce the enabling to keep resource boundaries between consecutive defined ranges. Otherwise, for example, an environment that boots with memmap=2G!8G,2G!10G will end up with a single 4G /dev/pmem0 device instead of a /dev/pmem0 and /dev/pmem1 device 2G in size. Reported-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhang Yi <yizhan@redhat.com> Cc: linux-nvdimm@lists.01.org Fixes: 917db484 ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation") Link: http://lkml.kernel.org/r/147629530854.10618.10383744751594021268.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Joonas Lahtinen 提交于
Use distinctive name for cpu_hotplug.dep_map to avoid the actual cpu_hotplug.lock appearing as cpu_hotplug.lock#2 in lockdep splats. Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gautham R . Shenoy <ego@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: intel-gfx@lists.freedesktop.org Cc: trivial@kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dmitry Vyukov 提交于
I observed false KSAN positives in the sctp code, when sctp uses jprobe_return() in jsctp_sf_eat_sack(). The stray 0xf4 in shadow memory are stack redzones: [ ] ================================================================== [ ] BUG: KASAN: stack-out-of-bounds in memcmp+0xe9/0x150 at addr ffff88005e48f480 [ ] Read of size 1 by task syz-executor/18535 [ ] page:ffffea00017923c0 count:0 mapcount:0 mapping: (null) index:0x0 [ ] flags: 0x1fffc0000000000() [ ] page dumped because: kasan: bad access detected [ ] CPU: 1 PID: 18535 Comm: syz-executor Not tainted 4.8.0+ #28 [ ] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ ] ffff88005e48f2d0 ffffffff82d2b849 ffffffff0bc91e90 fffffbfff10971e8 [ ] ffffed000bc91e90 ffffed000bc91e90 0000000000000001 0000000000000000 [ ] ffff88005e48f480 ffff88005e48f350 ffffffff817d3169 ffff88005e48f370 [ ] Call Trace: [ ] [<ffffffff82d2b849>] dump_stack+0x12e/0x185 [ ] [<ffffffff817d3169>] kasan_report+0x489/0x4b0 [ ] [<ffffffff817d31a9>] __asan_report_load1_noabort+0x19/0x20 [ ] [<ffffffff82d49529>] memcmp+0xe9/0x150 [ ] [<ffffffff82df7486>] depot_save_stack+0x176/0x5c0 [ ] [<ffffffff817d2031>] save_stack+0xb1/0xd0 [ ] [<ffffffff817d27f2>] kasan_slab_free+0x72/0xc0 [ ] [<ffffffff817d05b8>] kfree+0xc8/0x2a0 [ ] [<ffffffff85b03f19>] skb_free_head+0x79/0xb0 [ ] [<ffffffff85b0900a>] skb_release_data+0x37a/0x420 [ ] [<ffffffff85b090ff>] skb_release_all+0x4f/0x60 [ ] [<ffffffff85b11348>] consume_skb+0x138/0x370 [ ] [<ffffffff8676ad7b>] sctp_chunk_put+0xcb/0x180 [ ] [<ffffffff8676ae88>] sctp_chunk_free+0x58/0x70 [ ] [<ffffffff8677fa5f>] sctp_inq_pop+0x68f/0xef0 [ ] [<ffffffff8675ee36>] sctp_assoc_bh_rcv+0xd6/0x4b0 [ ] [<ffffffff8677f2c1>] sctp_inq_push+0x131/0x190 [ ] [<ffffffff867bad69>] sctp_backlog_rcv+0xe9/0xa20 [ ... ] [ ] Memory state around the buggy address: [ ] ffff88005e48f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ffff88005e48f400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] >ffff88005e48f480: f4 f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ^ [ ] ffff88005e48f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ffff88005e48f580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ================================================================== KASAN stack instrumentation poisons stack redzones on function entry and unpoisons them on function exit. If a function exits abnormally (e.g. with a longjmp like jprobe_return()), stack redzones are left poisoned. Later this leads to random KASAN false reports. Unpoison stack redzones in the frames we are going to jump over before doing actual longjmp in jprobe_return(). Signed-off-by: NDmitry Vyukov <dvyukov@google.com> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Reviewed-by: NMark Rutland <mark.rutland@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: kasan-dev@googlegroups.com Cc: surovegin@google.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1476454043-101898-1-git-send-email-dvyukov@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dmitry Vyukov 提交于
Kprobes save and restore raw stack chunks with memcpy(). With KASAN these chunks can contain poisoned stack redzones, as the result memcpy() interceptor produces false stack out-of-bounds reports. Use __memcpy() instead of memcpy() for stack copying. __memcpy() is not instrumented by KASAN and does not lead to the false reports. Currently there is a spew of KASAN reports during boot if CONFIG_KPROBES_SANITY_TEST is enabled: [ ] Kprobe smoke test: started [ ] ================================================================== [ ] BUG: KASAN: stack-out-of-bounds in setjmp_pre_handler+0x17c/0x280 at addr ffff88085259fba8 [ ] Read of size 64 by task swapper/0/1 [ ] page:ffffea00214967c0 count:0 mapcount:0 mapping: (null) index:0x0 [ ] flags: 0x2fffff80000000() [ ] page dumped because: kasan: bad access detected [...] Reported-by: NCAI Qian <caiqian@redhat.com> Tested-by: NCAI Qian <caiqian@redhat.com> Signed-off-by: NDmitry Vyukov <dvyukov@google.com> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kasan-dev@googlegroups.com [ Improved various details. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Josh Poimboeuf 提交于
Recently objtool has started reporting a few "unreachable instruction" warnings when CONFIG_GCOV is enabled for newer versions of GCC. Usually this warning means there's some new control flow that objtool doesn't understand. But in this case, objtool is correct and the instructions really are inaccessible. It's an annoying quirk of gcov, but it's harmless, so it's ok to just silence the warnings. With older versions of GCC, it was relatively easy to detect gcov-specific instructions and to skip any unreachable warnings produced by them. But GCC 6 has gotten craftier. Instead of continuing to play whack-a-mole with gcov, just use a bigger, more permanent hammer and disable unreachable warnings for the whole file when gcov is enabled. This is fine to do because a) unreachable warnings are usually of questionable value; and b) gcov isn't used for production kernels and we can relax the checks a bit there. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Josh Poimboeuf 提交于
GCC 6 added a new switch statement jump table optimization which makes objtool's life harder. It looks like: mov [rodata addr],%reg1 ... some instructions ... jmpq *(%reg1,%reg2,8) The optimization is quite rare, but objtool still needs to be able to identify the pattern so that it can follow all possible control flow paths related to the switch statement. In order to detect the pattern, objtool starts from the indirect jump and scans backwards through the function until it finds the first instruction in the pattern. If it encounters an unconditional jump along the way, it stops and considers the pattern to be not found. As it turns out, unconditional jumps can happen, as long as they are small forward jumps within the range being scanned. This fixes the following warnings: drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Linus Torvalds 提交于
-
git://github.com/luisbg/linux-befs由 Linus Torvalds 提交于
Pull befs fixes from Luis de Bethencourt: "I recently took maintainership of the befs file system [0]. This is the first time I send you a git pull request, so please let me know if all the below is OK. Salah Triki and myself have been cleaning the code and fixing a few small bugs. Sorry I couldn't send this sooner in the merge window, I was waiting to have my GPG key signed by kernel members at ELCE in Berlin a few days ago." [0] https://lkml.org/lkml/2016/7/27/502 * tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs: (39 commits) befs: befs: fix style issues in datastream.c befs: improve documentation in datastream.c befs: fix typos in datastream.c befs: fix typos in btree.c befs: fix style issues in super.c befs: fix comment style befs: add check for ag_shift in superblock befs: dump inode_size superblock information befs: remove unnecessary initialization befs: fix typo in befs_sb_info befs: add flags field to validate superblock state befs: fix typo in befs_find_key befs: remove unused BEFS_BT_PARMATCH fs: befs: remove ret variable fs: befs: remove in vain variable assignment fs: befs: remove unnecessary *befs_sb variable fs: befs: remove useless initialization to zero fs: befs: remove in vain variable assignment fs: befs: Insert NULL inode to dentry fs: befs: Remove useless calls to brelse in befs_find_brun_dblindirect ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull gcc plugins update from Kees Cook: "This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals" * tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: latent_entropy: Mark functions with __latent_entropy gcc-plugins: Add latent_entropy plugin
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
-