- 03 12月, 2006 40 次提交
-
-
由 Al Viro 提交于
a) struct sockaddr_storage * passed to sctp_ulpevent_make_peer_addr_change() actually points at union sctp_addr field in a structure. Then that sucker gets copied to userland, with whatever junk we might have there. b) it's actually having host-endian sin_port. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
It expects (and gets) laddr with net-endian sin_port. And then it calls sctp_bind_addr_match(), which *does* care about port numbers in case of ipv6 and expects them to be host-endian. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
That's going to be a long series. Introduced temporary helpers doing copy-and-convert for sctp_addr; they are used to kill flip-in-place in global data structures and will be used to gradually push host-endian uses of sctp_addr out of existence. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
also always get __be16 protocol error; switch to SCTP_PERR() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
argument stored for SCTP_CMD_INIT_FAILED is always __be16 (protocol error). Introduced new field and accessor for it (SCTP_PERR()); switched to their use (from SCTP_U32() and .u32) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch makes two needlessly global functions static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
Make copy_to_user_policy_type take a type instead a policy and fix its users to pass the type Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Removes dependency on buggy rta_buf, fixes a memory corruption bug due to a unvalidated netlink attribute, and simplifies the code. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian McDonald 提交于
This one got lost on the way from Ian to Gerrit to me, fix it. Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Ian McDonald 提交于
This removes a non-referenced variable. Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Ian McDonald 提交于
This patch just updates DCCP documentation a bit. Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Ian McDonald 提交于
This makes the code of the dccp_probe module more portable. Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This adds documentation to the CCID 3 rx/tx socket fields, plus some minor re-formatting. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This reaps the benefit of the earlier patch, which changed the type of CCID 3 states to use enums, in that many conditions are now simplified and the number of possible (unexpected) values is greatly reduced. In a few instances, this also allowed to simplify pre-conditions; where care has been taken to retain logical equivalence. [DCCP]: Introduce a consistent BUG/WARN message scheme This refines the existing set of DCCP messages so that * BUG(), BUG_ON(), WARN_ON() have meaningful DCCP-specific counterparts * DCCP_CRIT (for severe warnings) is not rate-limited * DCCP_WARN() is introduced as rate-limited wrapper Using these allows a faster and cleaner transition to their original counterparts once the code has matured into a full DCCP implementation. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Ian McDonald 提交于
Previously the transmit queue was unbounded. This patch: * puts a limit on transmit queue length and sends back EAGAIN if the buffer is full * sets the TX queue length to a sensible default * implements tx buffer sysctls for DCCP Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This adds a CCID3 debug option to the configuration menu which is missing in Kconfig, but already used by the code. CCID 2 already provides such an entry. To enable debugging, set CONFIG_IP_DCCP_CCID3_DEBUG=y NOTE: The use of ccid3_{t,r}x_state_name is safe, since now only enum values can appear. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This patch * makes debugging (when configured) work both for static / module build * provides generic debugging macros for use in other DCCP / CCID modules * adds missing information about debug parameters to Kconfig * performs some code tidy-up Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Michael Chan 提交于
Update version to 1.5.1. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add PCI ID and detection for 5709 copper and SerDes chips. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add basic support to initialize the 5709 chip. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Re-organize the firmware handling code and declarations a bit to make the code more compact. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Change a long udelay() in bnx2_setup_copper_phy() to msleep(). Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add code to parallel detect 1Gbps and 2.5Gbps link speeds. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Separate the 5706S SerDes handling code in bnx2_timer() and put it in a new function. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
1. Add support for 2.5Gbps forced speed setting. 2. Remove a long udelay() loop and change to msleep(). 3. Other misc. SerDes fixes. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-