- 28 7月, 2013 9 次提交
-
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
UDP checksums are optional, hence pktgen has been omitting them in favour of performance. The optional flag UDPCSUM enables UDP checksumming. If the output device supports hardware checksumming the skb is prepared and marked CHECKSUM_PARTIAL, otherwise the checksum is generated in software. Signed-off-by: NThomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <edumazet@google.com> Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Asias He 提交于
This is useful for other VSOCK transport implemented outside the net/vmw_vsock/ directory to use these headers. Signed-off-by: NAsias He <asias@redhat.com> Acked-by: NAndy King <acking@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.infradead.org/users/dvhart/linux-2.6由 David S. Miller 提交于
Darren Hart says: ==================== Add support for the MinnowBoard in the pch_gbe driver. This was originally sent to LKML as part of the MinnowBoard support series. That is now partially merged and this version of the patch has been isolated from those changes and is now completely self-contained. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ming Lei 提交于
The default RX_QLEN()/TX_QLEN() didn't consider super speed USB device, so only max 4 URBs are scheduled at the same time for tx/rx, then USB3 NIC can't perform very well. With this patch, both rx and tx thoughput are increased more than 100Mbps when doing iperf test on ax88179_178a USB 3.0 NIC. Signed-off-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ming Lei 提交于
This patch centralizes computing of max rx/tx qlen, because: - RX_QLEN()/TX_QLEN() is called in hot path - computing depends on device's usb speed, now we have ls/fs, hs, ss, so more checks need to be involved - in fact, max rx/tx qlen should not only depend on device USB speed, but also depend on ethernet link speed, so we need to consider that in future. - if SG support is done, max tx qlen may need change too Generally, hard_mtu and rx_urb_size are changed in bind(), reset() and link_reset() callback, and change mtu network operation, this patches introduces the API of usbnet_update_max_qlen(), and calls it in above path. Signed-off-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
Inspired by commit f09e2249 (macvtap: restore vlan header on user read). This patch adds hardware vlan tx support for tuntap. This is done by copying vlan header directly into userspace in tun_put_user() instead of doing it through __vlan_put_tag() in dev_hard_start_xmit(). This eliminates one unnecessary memmove() in vlan_insert_tag() for 802.1ad and 802.1q traffic. pktgen test shows about 20% improvement for 802.1q traffic: Before: 662149pps 317Mb/sec (317831520bps) errors: 0 After: 801033pps 384Mb/sec (384495840bps) errors: 0 Cc: Basil Gor <basil.gor@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Stringer 提交于
This patch consolidates the SCTP checksum calculation code from various places to a single new function, sctp_compute_cksum(skb, offset). Signed-off-by: NJoe Stringer <joe@wand.net.nz> Reviewed-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
For small packets we can simplify xmit processing by linearizing buffers with the header: most packets seem to have enough head room we can use for this purpose. Since existing hypervisors require that header is the first s/g element, we need a feature bit for this. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 7月, 2013 4 次提交
-
-
由 stephen hemminger 提交于
This started out with fixing a sparse warning, then I realized that the wrapper function bond_netpoll_info could just be removed by rolling it into the enable code. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
This started out with fixing a sparse warning, then I realized that the wrapper function team_netpoll_info could just be collapsed away by rolling it into the enable code. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Acked-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
This started out with fixing a sparse warning, then I realized that the wrapper function br_netpoll_info could just be collapsed away by rolling it into the enable code. Also, eliminate unnecessary goto's Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Sheng-Hui 提交于
We have BOND_MODE_ROUNDROBIN pre-defined as 0, and it's the lowest mode number. Use it to check the arg lower bound instead of magic number 0 in bond_mode_name. Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2013 26 次提交
-
-
由 Darren Hart 提交于
The MinnowBoard uses an AR803x PHY with the PCH GBE which requires special handling. Use the MinnowBoard PCI Subsystem ID to detect this and add a pci_device_id.driver_data structure and functions to handle platform setup. The AR803x does not implement the RGMII 2ns TX clock delay in the trace routing nor via strapping. Add a detection method for the board and the PHY and enable the TX clock delay via the registers. This PHY will hibernate without link for 10 seconds. Ensure the PHY is awake for probe and then disable hibernation. A future improvement would be to convert pch_gbe to using PHYLIB and making sure we can wake the PHY at the necessary times rather than permanently disabling it. Signed-off-by: NDarren Hart <dvhart@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Joe Perches <joe@perches.com> Cc: netdev@vger.kernel.org
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Darren Hart 提交于
Avoid using magic numbers when we have perfectly good defines just lying around. Signed-off-by: NDarren Hart <dvhart@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: netdev@vger.kernel.org
-
由 Thomas Gleixner 提交于
No users outside net/core/dev.c. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Idea of this patch is to add optional limitation of number of unsent bytes in TCP sockets, to reduce usage of kernel memory. TCP receiver might announce a big window, and TCP sender autotuning might allow a large amount of bytes in write queue, but this has little performance impact if a large part of this buffering is wasted : Write queue needs to be large only to deal with large BDP, not necessarily to cope with scheduling delays (incoming ACKS make room for the application to queue more bytes) For most workloads, using a value of 128 KB or less is OK to give applications enough time to react to POLLOUT events in time (or being awaken in a blocking sendmsg()) This patch adds two ways to set the limit : 1) Per socket option TCP_NOTSENT_LOWAT 2) A sysctl (/proc/sys/net/ipv4/tcp_notsent_lowat) for sockets not using TCP_NOTSENT_LOWAT socket option (or setting a zero value) Default value being UINT_MAX (0xFFFFFFFF), meaning this has no effect. This changes poll()/select()/epoll() to report POLLOUT only if number of unsent bytes is below tp->nosent_lowat Note this might increase number of sendmsg()/sendfile() calls when using non blocking sockets, and increase number of context switches for blocking sockets. Note this is not related to SO_SNDLOWAT (as SO_SNDLOWAT is defined as : Specify the minimum number of bytes in the buffer until the socket layer will pass the data to the protocol) Tested: netperf sessions, and watching /proc/net/protocols "memory" column for TCP With 200 concurrent netperf -t TCP_STREAM sessions, amount of kernel memory used by TCP buffers shrinks by ~55 % (20567 pages instead of 45458) lpq83:~# echo -1 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# (super_netperf 200 -t TCP_STREAM -H remote -l 90 &); sleep 60 ; grep TCP /proc/net/protocols TCPv6 1880 2 45458 no 208 yes ipv6 y y y y y y y y y y y y y n y y y y y TCP 1696 508 45458 no 208 yes kernel y y y y y y y y y y y y y n y y y y y lpq83:~# echo 131072 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# (super_netperf 200 -t TCP_STREAM -H remote -l 90 &); sleep 60 ; grep TCP /proc/net/protocols TCPv6 1880 2 20567 no 208 yes ipv6 y y y y y y y y y y y y y n y y y y y TCP 1696 508 20567 no 208 yes kernel y y y y y y y y y y y y y n y y y y y Using 128KB has no bad effect on the throughput or cpu usage of a single flow, although there is an increase of context switches. A bonus is that we hold socket lock for a shorter amount of time and should improve latencies of ACK processing. lpq83:~# echo -1 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# perf stat -e context-switches ./netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3 OMNI Send TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : +/-2.500% @ 99% conf. Local Remote Local Elapsed Throughput Throughput Local Local Remote Remote Local Remote Service Send Socket Recv Socket Send Time Units CPU CPU CPU CPU Service Service Demand Size Size Size (sec) Util Util Util Util Demand Demand Units Final Final % Method % Method 1651584 6291456 16384 20.00 17447.90 10^6bits/s 3.13 S -1.00 U 0.353 -1.000 usec/KB Performance counter stats for './netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3': 412,514 context-switches 200.034645535 seconds time elapsed lpq83:~# echo 131072 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# perf stat -e context-switches ./netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3 OMNI Send TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : +/-2.500% @ 99% conf. Local Remote Local Elapsed Throughput Throughput Local Local Remote Remote Local Remote Service Send Socket Recv Socket Send Time Units CPU CPU CPU CPU Service Service Demand Size Size Size (sec) Util Util Util Util Demand Demand Units Final Final % Method % Method 1593240 6291456 16384 20.00 17321.16 10^6bits/s 3.35 S -1.00 U 0.381 -1.000 usec/KB Performance counter stats for './netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3': 2,675,818 context-switches 200.029651391 seconds time elapsed Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-By: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Several call sites use the hardcoded following condition : sk_stream_wspace(sk) >= sk_stream_min_wspace(sk) Lets use a helper because TCP_NOTSENT_LOWAT support will change this condition for TCP sockets. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
After this file has moved to the uapi section, we also need to update this in the maintainers file. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
The SCTP mailing list address to send patches or questions to is linux-sctp@vger.kernel.org and not lksctp-developers@lists.sourceforge.net anymore. Therefore, update all occurences. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
Add support to show CPSW hardware statistics to user via ethtool so user can find if there were any error reported by hardware or the system is over loaded duing high data rate transfer. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The error is found by the checkpatch.pl tools. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
We need rtnl protection while reading slave_cnt and updating the .fail_over_mac, and it also follows the logic "don't change anything slave-related without rtnl". :) Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
net/bonding/bond_sysfs.c:1302: ERROR: else should follow close brace '}' net/bonding/bond_sysfs.c:1314: ERROR: else should follow close brace '}' Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
This patch moves all enic ethtool hooks from enic_main.c to a new file enic_ethtool.c Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andi Shyti 提交于
This patch gets rid of the following warning: net/9p/trans_rdma.c:594:12: warning: ‘rdma_cancelled’ defined but not used [-Wunused-function] static int rdma_cancelled(struct p9_client *client, struct p9_req_t *req) The rdma_cancelled function is not called anywhere in the kernel Signed-off-by: NAndi Shyti <andi@etezian.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sathya Perla says: ==================== The following patches are mostly for providing MAC filtering ability for VFs. Pls apply. Thanks! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Currently the UC-list is being deleted from the HW MAC table, but the primary MAC is not. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
On SH-R and Lancer-R, GET_MAC_LIST cmd is better supported (instead of NTWK_MAC_QUERY cmd) to query provisioned MAC addresses. Similiarly, (on SH-R and Lancer-R) SET_MAC_LIST must be used by the PF to provision a permanent MAC addresses to the VF. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
The code to configure the permanent MAC in be_setup() has become quite complicated, with different FW cmds being used for BEx, SH-R and Lancer. Simplify the logic by moving some of this complexity to be_cmds.c. This makes the code in be_setup() a little more readable. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
For BE3 VFs, the permanent MAC is added by its PF. The VF can retrieve its pmac_id only via the IFACE_CREATE cmd. This is not true for Lancer and SH-R VFs which get the pmac_id by issuing a ADD_IFACE_MAC cmd. So, use this hack only for BE3 VFs. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
In the current design VFs were not allowed to program MAC/VLAN filters. Only the PF driver was allowed to configure/provision MAC and transparent VLANs to a VF. Change this to support MAC/VLAN filtering on a VF by a VM. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Currently, the VFs by default don't have the privilege to modify MAC address. This will change in a subsequent fix wherein VFs will have the ability to modify MAC/VLAN filters. Fix be_mac_addr_set() logic to support MAC address modification on a privileged VF too. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
This is a copy of support for r8a7778/9 with the .rmiimode mode bit of struct sh_eth_cpu_data set. Also update R8A7779 to R8A777x. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
This register is prsent on the r8a7790 SoC. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 fan.du 提交于
The "int addrlen" in fib6_add_1 is rebundant, as we can get it from parameter "struct in6_addr *addr" once we modified its type. And also fix some coding style issues in fib6_add_1 Signed-off-by: NFan Du <fan.du@windriver.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 fan.du 提交于
Seting rt->rt6i_nsiblings to zero is rebundant, because above memset zeroed the rest of rt excluding the first dst memember. Signed-off-by: NFan Du <fan.du@windriver.com> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 7月, 2013 1 次提交
-
-
由 Amerigo Wang 提交于
GRE tunnel and IPIP tunnel already switched to the new ip tunnel code, VTI tunnel can use it too. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-