- 12 11月, 2014 1 次提交
-
-
由 Johannes Berg 提交于
Put duplicate detection into its own RX handler, and separate out the conditions a bit to make the code more readable. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 10 11月, 2014 5 次提交
-
-
由 Johannes Berg 提交于
Radiotap vendor namespace data might still be useful, but we reverted it because it used too much space in the RX status. Put it back, but address the space problem by using a single bit only and putting everything else into the skb->data. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Luciano Coelho 提交于
For multi-vif channel switches, we want to send NL80211_CMD_CH_SWITCH_NOTIFY to the userspace to let it decide whether other interfaces need to be moved as well. This is needed when we want a P2P GO interface to follow the channel of a station, for example. Modify the code so that all interfaces can send CSA notifications. Additionally, send notifications for STA CSA as well. Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Luciano Coelho 提交于
Send a channel switch notification to userspace when a channel switch is requested or when we react to a remote CSA. Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Luciano Coelho 提交于
The device_timestamp value was left out of the event trace for drv_pre_channel_switch by mistake. Add it. Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Luciano Coelho 提交于
There was a mistake when merging commit 6d027bcc (mac80211: add pre_channel_switch driver operation) for upstream. The assignment of the values in the ch_switch structure came below the call to drv_pre_channel_switch. Fix the order. Fixes: 6d027bcc (mac80211: add pre_channel_switch driver operation) Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 04 11月, 2014 6 次提交
-
-
由 Eliad Peller 提交于
Drivers might want to know also when mac80211 has completed reconfiguring after resume (e.g. in order to know when frames can be passed to mac80211). Rename restart_complete() to a more-generic reconfig_complete(), and add a new enum to indicate the reconfiguration type. Update the current users with the new prototype. Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Andrei Otcheretianski 提交于
Deliver up to 128 frames during service period instead of 8 if unlimited is specified by the client during association. 8 was just an arbitrary value; so is 128 since unlimited can be any number. However for large traffic bursts, increasing this value looks reasonable. Also, it seems that a few certification tests expect more frames to be delivered during SP. Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
When the RIC data element (RDE) is included in the IEs coming from userspace for an association request, its handling is currently broken as any IEs that are contained within it would be split off from it and inserted again after all the IEs that mac80211 generates (e.g. HT, VHT.) To fix this, treat the RIC element specially, and stop after it only when we find something that doesn't actually belong to it. This assumes userspace is actually correctly building it, directly after the fast BSS transition IE and before all the others like extended capabilities. This leaves as a potential problem the case where userspace is building the following IEs: [RDE] [vendor resource description] [vendor non-resource IE] In this case, we'd erroneously consider all three IEs to be part of the RIC data together, and not split them between the two vendor IEs. Unfortunately, it isn't easily possible to distinguish vendor IEs, so this isn't easy to fix. Luckily, this case is rare as normally wpa_supplicant will include an extended capabilities IE in the IEs, and that certainly will break the two vendor IEs apart correctly. Reviewed-by: NEliad Peller <eliad@wizery.com> Reviewed-by: NBeni Lev <beni.lev@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Rostislav Lisovy 提交于
This patch adds 802.11p OCB (Outside the Context of a BSS) mode support. When communicating in OCB mode a mandatory wildcard BSSID (48 '1' bits) is used. The EDCA parameters handling function was changed to support 802.11p specific values. The insertion of a newly discovered STAs is done in the similar way as in the IBSS mode -- through the deferred insertion. The OCB mode uses a periodic 'housekeeping task' for expiration of disconnected STAs (in the similar manner as in the MESH mode). New Kconfig option for verbose OCB debugging outputs is added. Signed-off-by: NRostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Rostislav Lisovy 提交于
This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: NRostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
The configured tx power is often limited by hardware capabilities, channel settings, antenna configuration, etc. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> [fix tracing compilation] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 31 10月, 2014 1 次提交
-
-
由 Stephen Hemminger 提交于
Use codespell to find spelling errors. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 27 10月, 2014 5 次提交
-
-
由 Karl Beldan 提交于
When CONFIG_MAC80211_RC_MINSTREL_VHT is set, the module param minstrel_vht_only tells minstrel_ht whether to allow the mix of ht rates with vht rates. ATM, minstrel_ht skips ht rates when minstrel_vht_only is true, but it does that even if vht is not supported, which makes the sta rates fallback to legacy as no ht rate gets enabled. Fixes: 9208247d ("mac80211: minstrel_ht: add basic support for VHT rates <= 3SS@80MHz") Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
All the callers of ieee80211_mgd_probe_ap_send return right after they call the flush() callback. This means that calling flush() is uneeded since its meaning is to wait until the queues of the device are empty. Devices that know how to report status on Tx will do so using the regular path (ieee80211_tx_status) and this status will trigger the continuation of the flow of the probe (ieee80211_sta_tx_notify). Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Ben Greear 提交于
This is useful when creating virtual interfaces. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Ben Greear 提交于
This will be helpful when using the mac80211_hwsim wiphys and automated testing. Let user create the vifs as needed, and named as expected. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Ben Greear 提交于
Support creating wiphy devices with an optional name. This will be used by hwsim to have better automated control over virtual radio creation/deletion. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 24 10月, 2014 6 次提交
-
-
由 Arik Nemtsov 提交于
Allow drivers to iterate all stations currently uploaded to them. Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arik Nemtsov 提交于
During reconfig the station list is traversed in order and station are added back to the driver. Make sure the stations are added to the driver in the same order they were added to mac80211. This has a real side effect - some drivers (iwlwifi) require TDLS stations to be added only after the AP station for the same network. Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arik Nemtsov 提交于
Some drivers need to know which station is the TDLS link initiator. Expose this value via the mac80211 ieee80211_sta structure. Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arik Nemtsov 提交于
When an IV is generated, only the MAC header is moved back. The network header location remains the same relative to the skb head, as the new IV is using headroom space that was reserved in advance. Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Andrei Otcheretianski 提交于
Export ieee80211_ie_split function, so it can be reused by drivers which need to insert additional elements. Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Karl Beldan 提交于
When displaying a rate through debugfs minstrel_ht guesses its flags comparing group indexes. Since 3ec373c4 ("mac80211: minstrel_ht: include type (cck/ht) in rates flag"), the rate flags of interest are present in the mcs_group-s, so use it. While improving the code, this also fixes a smatch false positive "error: testing array offset 'i' after use" in minstrel_ht_stats_dump. This warning only triggers after 9208247d ("mac80211: minstrel_ht: add basic support for VHT rates <= 3SS@80MHz") with CONFIG_MAC80211_RC_MINSTREL_VHT unset because then MINSTREL_VHT_GROUP_0 is above MINSTREL_GROUPS_NB and smatch only barks when the "testing array offset" seems to prevent possible out of bonds accesses (which does not happen here since i < ARRAY_SIZE(mi->groups)). Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 22 10月, 2014 4 次提交
-
-
由 Johannes Berg 提交于
When a key is tainted during resume, it is no longer programmed into the device; however, it's uploaded flag may (will) be set. Clear the flag when not programming it because it's tainted to avoid attempting to remove it again later. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Use the currently existing APIs between mac80211 and the low level driver to implement WMM admission control. The low level driver needs to report the media time used by each transmitted packet in ieee80211_tx_status. Based on that information, mac80211 will modify the QoS parameters of the admission controlled Access Category when the limit is reached. Once the original QoS parameters can be restored, mac80211 will do so. One issue with this approach is that management frames will also erroneously be downgraded, but the upside is that the implementation is simple. In the future, it can be extended to driver- or device-based implementations that are better. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
There's no reason to ever set invalid CW_min/CW_max to the drivers, we should catch it in higher layers. However, the consequences of setting it wrong can be quite severe, so double-check at a low level and error out for invalid data. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Fabian Frederick 提交于
The debugfs_remove() function can safely take NULL parameters so the additionally null test isn't required, and there's no other reason to have it here, so remove it. Signed-off-by: NFabian Frederick <fabf@skynet.be> [rewrite commit message, re-introduce blank line after assert] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 21 10月, 2014 5 次提交
-
-
由 Karl Beldan 提交于
When the new CONFIG_MAC80211_RC_MINSTREL_VHT is not set (default 'N'), there is no behavioral change including in sampling and MCS_GROUP_RATES remains 8. Otherwise MCS_GROUP_RATES is 10, and a module parameter *vht_only* (default 'true'), restricts the rates selection to VHT when VHT is supported. Regarding the debugfs stats buffer: It is explicitly increased from 8k to 32k to fit every rates incl. when both HT and VHT rates are enabled, as for the format, before: type rate tpt eprob *prob ret *ok(*cum) ok( cum) HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0( 0) after: type rate tpt eprob *prob ret *ok(*cum) ok( cum) HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0( 0) VHT40/LGI MCS5/2 0.0 0.0 0.0 0 0( 0) 0( 0) Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Karl Beldan 提交于
ATM, we grep cck rates idx with idx / MCS_GROUP_RATES == MINSTREL_CCK_GROUP. Matching neither-cck-non-ht rates could be done by replacing '==' with '>', however it would be less versatile or explicit. This will allow to match VHT rates with IEEE80211_TX_RC_VHT_MCS. Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Karl Beldan 提交于
No functional change. Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Karl Beldan 提交于
Since 5935839a ("mac80211: improve minstrel_ht rate sorting by throughput & probability"), the rate indexes are manipulated via u8's and hence allow for a maximum of 256 mcs_group entries in minstrel_mcs_groups. ATM, minstrel_ht advertizes support up to 3HTSS@40MHz, consuming: 8(MCS_GROUP_RATES) * (3(SS)*2(GI)*2(BW)+1(CCK)), i.e. 104 entries. Support for 3VHTSS@80MHz will require: 10(MCS_GROUP_RATES) * (3(SS)*2(GI)*2(BW)+1(CCK)) + 10(MCS_GROUP_RATES) * (3(SS)*2(GI)*3(BW)), i.e. 130 + 180 entries. This change moves from u8s to u16s where necessary. Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
This showed up as a sparse warning (with higher verbosity) and is certainly correct - the change flags should be unsigned. It's not that important since high flag numbers aren't used and bitwise operations would still work. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 20 10月, 2014 2 次提交
-
-
由 Karl Beldan 提交于
ATM an HT rc_stats line is 106 chars. Times 8(MCS_GROUP_RATES)*3(SS)*2(GI)*2(BW) + CCK(4), i.e. x100, this is well above the current 8192 - sizeof(*ms) currently allocated. Fix this by squeezing the output as follows (not that we're short on memory but this also improves readability and range, the new format adds one more digit to *ok/*cum and ok/cum): - Before (HT) (106 ch): type rate throughput ewma prob this prob retry this succ/attempt success attempts CCK/LP 5.5M 0.0 0.0 0.0 0 0( 0) 0 0 HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0 0 - After (75 ch): type rate tpt eprob *prob ret *ok(*cum) ok( cum) CCK/LP 5.5M 0.0 0.0 0.0 0 0( 0) 0( 0) HT20/LGI ABCDP MCS0 0.0 0.0 0.0 1 0( 0) 0( 0) - Align non-HT format Before (non-HT) (83 ch): rate throughput ewma prob this prob this succ/attempt success attempts ABCDP 6 0.0 0.0 0.0 0( 0) 0 0 54 0.0 0.0 0.0 0( 0) 0 0 - After (61 ch): rate tpt eprob *prob *ok(*cum) ok( cum) ABCDP 1 0.0 0.0 0.0 0( 0) 0( 0) 54 0.0 0.0 0.0 0( 0) 0( 0) *This also adds dynamic checks for overflow, lowers the size of the non-HT request (allowing > 30 entries) and replaces the buddy-rounded allocations (s/sizeof(*ms) + 8192/8192). Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Acked-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Jouni Malinen 提交于
This makes it easier to add new parameters for the del_station calls without having to modify all drivers that use this. Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 14 10月, 2014 1 次提交
-
-
由 Karl Beldan 提交于
It affects non-(V)HT rates and can lead to selecting an rts_cts rate that is not a basic rate or way superior to the reference rate (ATM rates[0] used for the 1st attempt of the protected frame data). E.g, assuming drivers register growing (bitrate) sorted tables of ieee80211_rate-s, having : - rates[0].idx == d'2 and basic_rates == b'10100 will select rts_cts idx b'10011 & ~d'(BIT(2)-1), i.e. 1, likewise - rates[0].idx == d'2 and basic_rates == b'10001 will select rts_cts idx b'10000 The first is not a basic rate and the second is > rates[0]. Also, wrt severity of the addressed misbehavior, ATM we only have one rts_cts_rate_idx rather than one per rate table entry, so this idx might still point to bitrates > rates[1..MAX_RATES]. Fixes: 5253ffb8 ("mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates") Cc: stable@vger.kernel.org Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 10 10月, 2014 2 次提交
-
-
由 Michal Kazior 提交于
It is okay to enable DFS for channel contexts based drivers as long as no combination advertises radar detection and multi-channel operation at the same time. Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Fabian Frederick 提交于
No need to store ieee80211_vif_use_reserved_context() result and test it before returning. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 09 10月, 2014 2 次提交
-
-
由 Luciano Coelho 提交于
Channel switch with multiple channel contexts should now work fine. Remove check that disallows switches when multiple contexts are in use. Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Luciano Coelho 提交于
Instead of immediately reopening the queues (in case of block_tx), calling the post_channel_switch operation and sending the notification, wait for the first beacon on the new channel. This makes sure that we don't lose packets if the AP/GO is not on the new channel yet. Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-