提交 fdca4f16 编写于 作者: Q Qipeng Zha 提交者: Darren Hart

platform:x86: add Intel P-Unit mailbox IPC driver

This driver provides support for P-Unit mailbox IPC on Intel platforms.
The heart of the P-Unit is the Foxton microcontroller and its firmware,
which provide mailbox interface for power management usage.
Signed-off-by: NQipeng Zha <qipeng.zha@intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
上级 8cc7fb4a
......@@ -5680,12 +5680,14 @@ F: drivers/dma/mic_x100_dma.c
F: drivers/dma/mic_x100_dma.h
F Documentation/mic/
INTEL PMC IPC DRIVER
INTEL PMC/P-Unit IPC DRIVER
M: Zha Qipeng<qipeng.zha@intel.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/intel_pmc_ipc.c
F: drivers/platform/x86/intel_punit_ipc.c
F: arch/x86/include/asm/intel_pmc_ipc.h
F: arch/x86/include/asm/intel_punit_ipc.h
IOC3 ETHERNET DRIVER
M: Ralf Baechle <ralf@linux-mips.org>
......
#ifndef _ASM_X86_INTEL_PUNIT_IPC_H_
#define _ASM_X86_INTEL_PUNIT_IPC_H_
/*
* Three types of 8bit P-Unit IPC commands are supported,
* bit[7:6]: [00]: BIOS; [01]: GTD; [10]: ISPD.
*/
typedef enum {
BIOS_IPC = 0,
GTDRIVER_IPC,
ISPDRIVER_IPC,
RESERVED_IPC,
} IPC_TYPE;
#define IPC_TYPE_OFFSET 6
#define IPC_PUNIT_BIOS_CMD_BASE (BIOS_IPC << IPC_TYPE_OFFSET)
#define IPC_PUNIT_GTD_CMD_BASE (GTDDRIVER_IPC << IPC_TYPE_OFFSET)
#define IPC_PUNIT_ISPD_CMD_BASE (ISPDRIVER_IPC << IPC_TYPE_OFFSET)
#define IPC_PUNIT_CMD_TYPE_MASK (RESERVED_IPC << IPC_TYPE_OFFSET)
/* BIOS => Pcode commands */
#define IPC_PUNIT_BIOS_ZERO (IPC_PUNIT_BIOS_CMD_BASE | 0x00)
#define IPC_PUNIT_BIOS_VR_INTERFACE (IPC_PUNIT_BIOS_CMD_BASE | 0x01)
#define IPC_PUNIT_BIOS_READ_PCS (IPC_PUNIT_BIOS_CMD_BASE | 0x02)
#define IPC_PUNIT_BIOS_WRITE_PCS (IPC_PUNIT_BIOS_CMD_BASE | 0x03)
#define IPC_PUNIT_BIOS_READ_PCU_CONFIG (IPC_PUNIT_BIOS_CMD_BASE | 0x04)
#define IPC_PUNIT_BIOS_WRITE_PCU_CONFIG (IPC_PUNIT_BIOS_CMD_BASE | 0x05)
#define IPC_PUNIT_BIOS_READ_PL1_SETTING (IPC_PUNIT_BIOS_CMD_BASE | 0x06)
#define IPC_PUNIT_BIOS_WRITE_PL1_SETTING (IPC_PUNIT_BIOS_CMD_BASE | 0x07)
#define IPC_PUNIT_BIOS_TRIGGER_VDD_RAM (IPC_PUNIT_BIOS_CMD_BASE | 0x08)
#define IPC_PUNIT_BIOS_READ_TELE_INFO (IPC_PUNIT_BIOS_CMD_BASE | 0x09)
#define IPC_PUNIT_BIOS_READ_TELE_TRACE_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x0a)
#define IPC_PUNIT_BIOS_WRITE_TELE_TRACE_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x0b)
#define IPC_PUNIT_BIOS_READ_TELE_EVENT_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x0c)
#define IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x0d)
#define IPC_PUNIT_BIOS_READ_TELE_TRACE (IPC_PUNIT_BIOS_CMD_BASE | 0x0e)
#define IPC_PUNIT_BIOS_WRITE_TELE_TRACE (IPC_PUNIT_BIOS_CMD_BASE | 0x0f)
#define IPC_PUNIT_BIOS_READ_TELE_EVENT (IPC_PUNIT_BIOS_CMD_BASE | 0x10)
#define IPC_PUNIT_BIOS_WRITE_TELE_EVENT (IPC_PUNIT_BIOS_CMD_BASE | 0x11)
#define IPC_PUNIT_BIOS_READ_MODULE_TEMP (IPC_PUNIT_BIOS_CMD_BASE | 0x12)
#define IPC_PUNIT_BIOS_RESERVED (IPC_PUNIT_BIOS_CMD_BASE | 0x13)
#define IPC_PUNIT_BIOS_READ_VOLTAGE_OVER (IPC_PUNIT_BIOS_CMD_BASE | 0x14)
#define IPC_PUNIT_BIOS_WRITE_VOLTAGE_OVER (IPC_PUNIT_BIOS_CMD_BASE | 0x15)
#define IPC_PUNIT_BIOS_READ_RATIO_OVER (IPC_PUNIT_BIOS_CMD_BASE | 0x16)
#define IPC_PUNIT_BIOS_WRITE_RATIO_OVER (IPC_PUNIT_BIOS_CMD_BASE | 0x17)
#define IPC_PUNIT_BIOS_READ_VF_GL_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x18)
#define IPC_PUNIT_BIOS_WRITE_VF_GL_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x19)
#define IPC_PUNIT_BIOS_READ_FM_SOC_TEMP_THRESH (IPC_PUNIT_BIOS_CMD_BASE | 0x1a)
#define IPC_PUNIT_BIOS_WRITE_FM_SOC_TEMP_THRESH (IPC_PUNIT_BIOS_CMD_BASE | 0x1b)
/* GT Driver => Pcode commands */
#define IPC_PUNIT_GTD_ZERO (IPC_PUNIT_GTD_CMD_BASE | 0x00)
#define IPC_PUNIT_GTD_CONFIG (IPC_PUNIT_GTD_CMD_BASE | 0x01)
#define IPC_PUNIT_GTD_READ_ICCP_LIC_CDYN_SCAL (IPC_PUNIT_GTD_CMD_BASE | 0x02)
#define IPC_PUNIT_GTD_WRITE_ICCP_LIC_CDYN_SCAL (IPC_PUNIT_GTD_CMD_BASE | 0x03)
#define IPC_PUNIT_GTD_GET_WM_VAL (IPC_PUNIT_GTD_CMD_BASE | 0x06)
#define IPC_PUNIT_GTD_WRITE_CONFIG_WISHREQ (IPC_PUNIT_GTD_CMD_BASE | 0x07)
#define IPC_PUNIT_GTD_READ_REQ_DUTY_CYCLE (IPC_PUNIT_GTD_CMD_BASE | 0x16)
#define IPC_PUNIT_GTD_DIS_VOL_FREQ_CHG_REQUEST (IPC_PUNIT_GTD_CMD_BASE | 0x17)
#define IPC_PUNIT_GTD_DYNA_DUTY_CYCLE_CTRL (IPC_PUNIT_GTD_CMD_BASE | 0x1a)
#define IPC_PUNIT_GTD_DYNA_DUTY_CYCLE_TUNING (IPC_PUNIT_GTD_CMD_BASE | 0x1c)
/* ISP Driver => Pcode commands */
#define IPC_PUNIT_ISPD_ZERO (IPC_PUNIT_ISPD_CMD_BASE | 0x00)
#define IPC_PUNIT_ISPD_CONFIG (IPC_PUNIT_ISPD_CMD_BASE | 0x01)
#define IPC_PUNIT_ISPD_GET_ISP_LTR_VAL (IPC_PUNIT_ISPD_CMD_BASE | 0x02)
#define IPC_PUNIT_ISPD_ACCESS_IU_FREQ_BOUNDS (IPC_PUNIT_ISPD_CMD_BASE | 0x03)
#define IPC_PUNIT_ISPD_READ_CDYN_LEVEL (IPC_PUNIT_ISPD_CMD_BASE | 0x04)
#define IPC_PUNIT_ISPD_WRITE_CDYN_LEVEL (IPC_PUNIT_ISPD_CMD_BASE | 0x05)
/* Error codes */
#define IPC_PUNIT_ERR_SUCCESS 0
#define IPC_PUNIT_ERR_INVALID_CMD 1
#define IPC_PUNIT_ERR_INVALID_PARAMETER 2
#define IPC_PUNIT_ERR_CMD_TIMEOUT 3
#define IPC_PUNIT_ERR_CMD_LOCKED 4
#define IPC_PUNIT_ERR_INVALID_VR_ID 5
#define IPC_PUNIT_ERR_VR_ERR 6
#if IS_ENABLED(CONFIG_INTEL_PUNIT_IPC)
int intel_punit_ipc_simple_command(int cmd, int para1, int para2);
int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out);
#else
static inline int intel_punit_ipc_simple_command(int cmd,
int para1, int para2)
{
return -ENODEV;
}
static inline int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2,
u32 *in, u32 *out)
{
return -ENODEV;
}
#endif /* CONFIG_INTEL_PUNIT_IPC */
#endif
......@@ -944,4 +944,10 @@ config SURFACE_PRO3_BUTTON
depends on ACPI && INPUT
---help---
This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3 tablet.
config INTEL_PUNIT_IPC
tristate "Intel P-Unit IPC Driver"
---help---
This driver provides support for Intel P-Unit Mailbox IPC mechanism,
which is used to bridge the communications between kernel and P-Unit.
endif # X86_PLATFORM_DEVICES
......@@ -62,3 +62,4 @@ obj-$(CONFIG_PVPANIC) += pvpanic.o
obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o
obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o
obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
/*
* Driver for the Intel P-Unit Mailbox IPC mechanism
*
* (C) Copyright 2015 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The heart of the P-Unit is the Foxton microcontroller and its firmware,
* which provide mailbox interface for power management usage.
*/
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <asm/intel_punit_ipc.h>
/* IPC Mailbox registers */
#define OFFSET_DATA_LOW 0x0
#define OFFSET_DATA_HIGH 0x4
/* bit field of interface register */
#define CMD_RUN BIT(31)
#define CMD_ERRCODE_MASK GENMASK(7, 0)
#define CMD_PARA1_SHIFT 8
#define CMD_PARA2_SHIFT 16
#define CMD_TIMEOUT_SECONDS 1
enum {
BASE_DATA = 0,
BASE_IFACE,
BASE_MAX,
};
typedef struct {
struct device *dev;
struct mutex lock;
int irq;
struct completion cmd_complete;
/* base of interface and data registers */
void __iomem *base[RESERVED_IPC][BASE_MAX];
IPC_TYPE type;
} IPC_DEV;
static IPC_DEV *punit_ipcdev;
static inline u32 ipc_read_status(IPC_DEV *ipcdev, IPC_TYPE type)
{
return readl(ipcdev->base[type][BASE_IFACE]);
}
static inline void ipc_write_cmd(IPC_DEV *ipcdev, IPC_TYPE type, u32 cmd)
{
writel(cmd, ipcdev->base[type][BASE_IFACE]);
}
static inline u32 ipc_read_data_low(IPC_DEV *ipcdev, IPC_TYPE type)
{
return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW);
}
static inline u32 ipc_read_data_high(IPC_DEV *ipcdev, IPC_TYPE type)
{
return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH);
}
static inline void ipc_write_data_low(IPC_DEV *ipcdev, IPC_TYPE type, u32 data)
{
writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW);
}
static inline void ipc_write_data_high(IPC_DEV *ipcdev, IPC_TYPE type, u32 data)
{
writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH);
}
static const char *ipc_err_string(int error)
{
if (error == IPC_PUNIT_ERR_SUCCESS)
return "no error";
else if (error == IPC_PUNIT_ERR_INVALID_CMD)
return "invalid command";
else if (error == IPC_PUNIT_ERR_INVALID_PARAMETER)
return "invalid parameter";
else if (error == IPC_PUNIT_ERR_CMD_TIMEOUT)
return "command timeout";
else if (error == IPC_PUNIT_ERR_CMD_LOCKED)
return "command locked";
else if (error == IPC_PUNIT_ERR_INVALID_VR_ID)
return "invalid vr id";
else if (error == IPC_PUNIT_ERR_VR_ERR)
return "vr error";
else
return "unknown error";
}
static int intel_punit_ipc_check_status(IPC_DEV *ipcdev, IPC_TYPE type)
{
int loops = CMD_TIMEOUT_SECONDS * USEC_PER_SEC;
int errcode;
int status;
if (ipcdev->irq) {
if (!wait_for_completion_timeout(&ipcdev->cmd_complete,
CMD_TIMEOUT_SECONDS * HZ)) {
dev_err(ipcdev->dev, "IPC timed out\n");
return -ETIMEDOUT;
}
} else {
while ((ipc_read_status(ipcdev, type) & CMD_RUN) && --loops)
udelay(1);
if (!loops) {
dev_err(ipcdev->dev, "IPC timed out\n");
return -ETIMEDOUT;
}
}
status = ipc_read_status(ipcdev, type);
errcode = status & CMD_ERRCODE_MASK;
if (errcode) {
dev_err(ipcdev->dev, "IPC failed: %s, IPC_STS=0x%x\n",
ipc_err_string(errcode), status);
return -EIO;
}
return 0;
}
/**
* intel_punit_ipc_simple_command() - Simple IPC command
* @cmd: IPC command code.
* @para1: First 8bit parameter, set 0 if not used.
* @para2: Second 8bit parameter, set 0 if not used.
*
* Send a IPC command to P-Unit when there is no data transaction
*
* Return: IPC error code or 0 on success.
*/
int intel_punit_ipc_simple_command(int cmd, int para1, int para2)
{
IPC_DEV *ipcdev = punit_ipcdev;
IPC_TYPE type;
u32 val;
int ret;
mutex_lock(&ipcdev->lock);
reinit_completion(&ipcdev->cmd_complete);
type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET;
val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK;
val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT;
ipc_write_cmd(ipcdev, type, val);
ret = intel_punit_ipc_check_status(ipcdev, type);
mutex_unlock(&ipcdev->lock);
return ret;
}
EXPORT_SYMBOL(intel_punit_ipc_simple_command);
/**
* intel_punit_ipc_command() - IPC command with data and pointers
* @cmd: IPC command code.
* @para1: First 8bit parameter, set 0 if not used.
* @para2: Second 8bit parameter, set 0 if not used.
* @in: Input data, 32bit for BIOS cmd, two 32bit for GTD and ISPD.
* @out: Output data.
*
* Send a IPC command to P-Unit with data transaction
*
* Return: IPC error code or 0 on success.
*/
int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out)
{
IPC_DEV *ipcdev = punit_ipcdev;
IPC_TYPE type;
u32 val;
int ret;
mutex_lock(&ipcdev->lock);
reinit_completion(&ipcdev->cmd_complete);
type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET;
ipc_write_data_low(ipcdev, type, *in);
if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC)
ipc_write_data_high(ipcdev, type, *++in);
val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK;
val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT;
ipc_write_cmd(ipcdev, type, val);
ret = intel_punit_ipc_check_status(ipcdev, type);
if (ret)
goto out;
*out = ipc_read_data_low(ipcdev, type);
if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC)
*++out = ipc_read_data_high(ipcdev, type);
out:
mutex_unlock(&ipcdev->lock);
return ret;
}
EXPORT_SYMBOL_GPL(intel_punit_ipc_command);
static irqreturn_t intel_punit_ioc(int irq, void *dev_id)
{
IPC_DEV *ipcdev = dev_id;
complete(&ipcdev->cmd_complete);
return IRQ_HANDLED;
}
static int intel_punit_get_bars(struct platform_device *pdev)
{
struct resource *res;
void __iomem *addr;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(addr))
return PTR_ERR(addr);
punit_ipcdev->base[BIOS_IPC][BASE_DATA] = addr;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(addr))
return PTR_ERR(addr);
punit_ipcdev->base[BIOS_IPC][BASE_IFACE] = addr;
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(addr))
return PTR_ERR(addr);
punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr;
res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(addr))
return PTR_ERR(addr);
punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr;
res = platform_get_resource(pdev, IORESOURCE_MEM, 4);
addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(addr))
return PTR_ERR(addr);
punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr;
res = platform_get_resource(pdev, IORESOURCE_MEM, 5);
addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(addr))
return PTR_ERR(addr);
punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr;
return 0;
}
static int intel_punit_ipc_probe(struct platform_device *pdev)
{
int irq, ret;
punit_ipcdev = devm_kzalloc(&pdev->dev,
sizeof(*punit_ipcdev), GFP_KERNEL);
if (!punit_ipcdev)
return -ENOMEM;
platform_set_drvdata(pdev, punit_ipcdev);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
punit_ipcdev->irq = 0;
dev_warn(&pdev->dev, "Invalid IRQ, using polling mode\n");
} else {
ret = devm_request_irq(&pdev->dev, irq, intel_punit_ioc,
IRQF_NO_SUSPEND, "intel_punit_ipc",
&punit_ipcdev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq: %d\n", irq);
return ret;
}
punit_ipcdev->irq = irq;
}
ret = intel_punit_get_bars(pdev);
if (ret)
goto out;
punit_ipcdev->dev = &pdev->dev;
mutex_init(&punit_ipcdev->lock);
init_completion(&punit_ipcdev->cmd_complete);
out:
return ret;
}
static int intel_punit_ipc_remove(struct platform_device *pdev)
{
return 0;
}
static const struct acpi_device_id punit_ipc_acpi_ids[] = {
{ "INT34D4", 0 },
{ }
};
static struct platform_driver intel_punit_ipc_driver = {
.probe = intel_punit_ipc_probe,
.remove = intel_punit_ipc_remove,
.driver = {
.name = "intel_punit_ipc",
.acpi_match_table = ACPI_PTR(punit_ipc_acpi_ids),
},
};
static int __init intel_punit_ipc_init(void)
{
return platform_driver_register(&intel_punit_ipc_driver);
}
static void __exit intel_punit_ipc_exit(void)
{
platform_driver_unregister(&intel_punit_ipc_driver);
}
MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
MODULE_DESCRIPTION("Intel P-Unit IPC driver");
MODULE_LICENSE("GPL v2");
/* Some modules are dependent on this, so init earlier */
fs_initcall(intel_punit_ipc_init);
module_exit(intel_punit_ipc_exit);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册