提交 fc6bdb59 编写于 作者: L Linus Torvalds

Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc

Pull OLPC platform updates from Andres Salomon:
 "These move the OLPC Embedded Controller driver out of
  arch/x86/platform and into drivers/platform/olpc.

  OLPC machines are now ARM-based (which means lots of x86 and ARM
  changes), but are typically pretty self-contained..  so it makes more
  sense to go through a separate OLPC tree after getting the appropriate
  review/ACKs."

* 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc:
  x86: OLPC: move s/r-related EC cmds to EC driver
  Platform: OLPC: move global variables into priv struct
  Platform: OLPC: move debugfs support from x86 EC driver
  x86: OLPC: switch over to using new EC driver on x86
  Platform: OLPC: add a suspended flag to the EC driver
  Platform: OLPC: turn EC driver into a platform_driver
  Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it
  drivers: OLPC: update various drivers to include olpc-ec.h
  Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
......@@ -100,25 +100,6 @@ extern void olpc_xo1_pm_wakeup_clear(u16 value);
extern int pci_olpc_init(void);
/* EC related functions */
extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
unsigned char *outbuf, size_t outlen);
/* EC commands */
#define EC_FIRMWARE_REV 0x08
#define EC_WRITE_SCI_MASK 0x1b
#define EC_WAKE_UP_WLAN 0x24
#define EC_WLAN_LEAVE_RESET 0x25
#define EC_READ_EB_MODE 0x2a
#define EC_SET_SCI_INHIBIT 0x32
#define EC_SET_SCI_INHIBIT_RELEASE 0x34
#define EC_WLAN_ENTER_RESET 0x35
#define EC_WRITE_EXT_SCI_MASK 0x38
#define EC_SCI_QUERY 0x84
#define EC_EXT_SCI_QUERY 0x85
/* SCI source values */
#define EC_SCI_SRC_EMPTY 0x00
......
......@@ -18,6 +18,7 @@
#include <linux/pm.h>
#include <linux/mfd/core.h>
#include <linux/suspend.h>
#include <linux/olpc-ec.h>
#include <asm/io.h>
#include <asm/olpc.h>
......@@ -51,16 +52,11 @@ EXPORT_SYMBOL_GPL(olpc_xo1_pm_wakeup_clear);
static int xo1_power_state_enter(suspend_state_t pm_state)
{
unsigned long saved_sci_mask;
int r;
/* Only STR is supported */
if (pm_state != PM_SUSPEND_MEM)
return -EINVAL;
r = olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0);
if (r)
return r;
/*
* Save SCI mask (this gets lost since PM1_EN is used as a mask for
* wakeup events, which is not necessarily the same event set)
......@@ -76,16 +72,6 @@ static int xo1_power_state_enter(suspend_state_t pm_state)
/* Restore SCI mask (using dword access to CS5536_PM1_EN) */
outl(saved_sci_mask, acpi_base + CS5536_PM1_STS);
/* Tell the EC to stop inhibiting SCIs */
olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0);
/*
* Tell the wireless module to restart USB communication.
* Must be done twice.
*/
olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
return 0;
}
......
......@@ -23,6 +23,7 @@
#include <linux/power_supply.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
#include <linux/olpc-ec.h>
#include <asm/io.h>
#include <asm/msr.h>
......
......@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/power_supply.h>
#include <linux/olpc-ec.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
......
......@@ -14,14 +14,13 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/syscore_ops.h>
#include <linux/debugfs.h>
#include <linux/mutex.h>
#include <linux/olpc-ec.h>
#include <asm/geode.h>
#include <asm/setup.h>
......@@ -31,17 +30,6 @@
struct olpc_platform_t olpc_platform_info;
EXPORT_SYMBOL_GPL(olpc_platform_info);
static DEFINE_SPINLOCK(ec_lock);
/* debugfs interface to EC commands */
#define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */
#define EC_MAX_CMD_REPLY (8)
static struct dentry *ec_debugfs_dir;
static DEFINE_MUTEX(ec_debugfs_cmd_lock);
static unsigned char ec_debugfs_resp[EC_MAX_CMD_REPLY];
static unsigned int ec_debugfs_resp_bytes;
/* EC event mask to be applied during suspend (defining wakeup sources). */
static u16 ec_wakeup_mask;
......@@ -125,16 +113,13 @@ static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
* <http://wiki.laptop.org/go/Ec_specification>. Unfortunately, while
* OpenFirmware's source is available, the EC's is not.
*/
int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
unsigned char *outbuf, size_t outlen)
static int olpc_xo1_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
size_t outlen, void *arg)
{
unsigned long flags;
int ret = -EIO;
int i;
int restarts = 0;
spin_lock_irqsave(&ec_lock, flags);
/* Clear OBF */
for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
inb(0x68);
......@@ -198,10 +183,8 @@ int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
ret = 0;
err:
spin_unlock_irqrestore(&ec_lock, flags);
return ret;
}
EXPORT_SYMBOL_GPL(olpc_ec_cmd);
void olpc_ec_wakeup_set(u16 value)
{
......@@ -280,96 +263,6 @@ int olpc_ec_sci_query(u16 *sci_value)
}
EXPORT_SYMBOL_GPL(olpc_ec_sci_query);
static ssize_t ec_debugfs_cmd_write(struct file *file, const char __user *buf,
size_t size, loff_t *ppos)
{
int i, m;
unsigned char ec_cmd[EC_MAX_CMD_ARGS];
unsigned int ec_cmd_int[EC_MAX_CMD_ARGS];
char cmdbuf[64];
int ec_cmd_bytes;
mutex_lock(&ec_debugfs_cmd_lock);
size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
m = sscanf(cmdbuf, "%x:%u %x %x %x %x %x", &ec_cmd_int[0],
&ec_debugfs_resp_bytes,
&ec_cmd_int[1], &ec_cmd_int[2], &ec_cmd_int[3],
&ec_cmd_int[4], &ec_cmd_int[5]);
if (m < 2 || ec_debugfs_resp_bytes > EC_MAX_CMD_REPLY) {
/* reset to prevent overflow on read */
ec_debugfs_resp_bytes = 0;
printk(KERN_DEBUG "olpc-ec: bad ec cmd: "
"cmd:response-count [arg1 [arg2 ...]]\n");
size = -EINVAL;
goto out;
}
/* convert scanf'd ints to char */
ec_cmd_bytes = m - 2;
for (i = 0; i <= ec_cmd_bytes; i++)
ec_cmd[i] = ec_cmd_int[i];
printk(KERN_DEBUG "olpc-ec: debugfs cmd 0x%02x with %d args "
"%02x %02x %02x %02x %02x, want %d returns\n",
ec_cmd[0], ec_cmd_bytes, ec_cmd[1], ec_cmd[2], ec_cmd[3],
ec_cmd[4], ec_cmd[5], ec_debugfs_resp_bytes);
olpc_ec_cmd(ec_cmd[0], (ec_cmd_bytes == 0) ? NULL : &ec_cmd[1],
ec_cmd_bytes, ec_debugfs_resp, ec_debugfs_resp_bytes);
printk(KERN_DEBUG "olpc-ec: response "
"%02x %02x %02x %02x %02x %02x %02x %02x (%d bytes expected)\n",
ec_debugfs_resp[0], ec_debugfs_resp[1], ec_debugfs_resp[2],
ec_debugfs_resp[3], ec_debugfs_resp[4], ec_debugfs_resp[5],
ec_debugfs_resp[6], ec_debugfs_resp[7], ec_debugfs_resp_bytes);
out:
mutex_unlock(&ec_debugfs_cmd_lock);
return size;
}
static ssize_t ec_debugfs_cmd_read(struct file *file, char __user *buf,
size_t size, loff_t *ppos)
{
unsigned int i, r;
char *rp;
char respbuf[64];
mutex_lock(&ec_debugfs_cmd_lock);
rp = respbuf;
rp += sprintf(rp, "%02x", ec_debugfs_resp[0]);
for (i = 1; i < ec_debugfs_resp_bytes; i++)
rp += sprintf(rp, ", %02x", ec_debugfs_resp[i]);
mutex_unlock(&ec_debugfs_cmd_lock);
rp += sprintf(rp, "\n");
r = rp - respbuf;
return simple_read_from_buffer(buf, size, ppos, respbuf, r);
}
static const struct file_operations ec_debugfs_genops = {
.write = ec_debugfs_cmd_write,
.read = ec_debugfs_cmd_read,
};
static void setup_debugfs(void)
{
ec_debugfs_dir = debugfs_create_dir("olpc-ec", 0);
if (ec_debugfs_dir == ERR_PTR(-ENODEV))
return;
debugfs_create_file("cmd", 0600, ec_debugfs_dir, NULL,
&ec_debugfs_genops);
}
static int olpc_ec_suspend(void)
{
return olpc_ec_mask_write(ec_wakeup_mask);
}
static bool __init check_ofw_architecture(struct device_node *root)
{
const char *olpc_arch;
......@@ -424,8 +317,59 @@ static int __init add_xo1_platform_devices(void)
return 0;
}
static struct syscore_ops olpc_syscore_ops = {
.suspend = olpc_ec_suspend,
static int olpc_xo1_ec_probe(struct platform_device *pdev)
{
/* get the EC revision */
olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
(unsigned char *) &olpc_platform_info.ecver, 1);
/* EC version 0x5f adds support for wide SCI mask */
if (olpc_platform_info.ecver >= 0x5f)
olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
pr_info("OLPC board revision %s%X (EC=%x)\n",
((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
olpc_platform_info.boardrev >> 4,
olpc_platform_info.ecver);
return 0;
}
static int olpc_xo1_ec_suspend(struct platform_device *pdev)
{
olpc_ec_mask_write(ec_wakeup_mask);
/*
* Squelch SCIs while suspended. This is a fix for
* <http://dev.laptop.org/ticket/1835>.
*/
return olpc_ec_cmd(EC_SET_SCI_INHIBIT, NULL, 0, NULL, 0);
}
static int olpc_xo1_ec_resume(struct platform_device *pdev)
{
/* Tell the EC to stop inhibiting SCIs */
olpc_ec_cmd(EC_SET_SCI_INHIBIT_RELEASE, NULL, 0, NULL, 0);
/*
* Tell the wireless module to restart USB communication.
* Must be done twice.
*/
olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
olpc_ec_cmd(EC_WAKE_UP_WLAN, NULL, 0, NULL, 0);
return 0;
}
static struct olpc_ec_driver ec_xo1_driver = {
.probe = olpc_xo1_ec_probe,
.suspend = olpc_xo1_ec_suspend,
.resume = olpc_xo1_ec_resume,
.ec_cmd = olpc_xo1_ec_cmd,
};
static struct olpc_ec_driver ec_xo1_5_driver = {
.probe = olpc_xo1_ec_probe,
.ec_cmd = olpc_xo1_ec_cmd,
};
static int __init olpc_init(void)
......@@ -435,16 +379,17 @@ static int __init olpc_init(void)
if (!olpc_ofw_present() || !platform_detect())
return 0;
spin_lock_init(&ec_lock);
/* register the XO-1 and 1.5-specific EC handler */
if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) /* XO-1 */
olpc_ec_driver_register(&ec_xo1_driver, NULL);
else
olpc_ec_driver_register(&ec_xo1_5_driver, NULL);
platform_device_register_simple("olpc-ec", -1, NULL, 0);
/* assume B1 and above models always have a DCON */
if (olpc_board_at_least(olpc_board(0xb1)))
olpc_platform_info.flags |= OLPC_F_DCON;
/* get the EC revision */
olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
(unsigned char *) &olpc_platform_info.ecver, 1);
#ifdef CONFIG_PCI_OLPC
/* If the VSA exists let it emulate PCI, if not emulate in kernel.
* XO-1 only. */
......@@ -452,14 +397,6 @@ static int __init olpc_init(void)
!cs5535_has_vsa2())
x86_init.pci.arch_init = pci_olpc_init;
#endif
/* EC version 0x5f adds support for wide SCI mask */
if (olpc_platform_info.ecver >= 0x5f)
olpc_platform_info.flags |= OLPC_F_EC_WIDE_SCI;
printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
olpc_platform_info.boardrev >> 4,
olpc_platform_info.ecver);
if (olpc_platform_info.boardrev < olpc_board_pre(0xd0)) { /* XO-1 */
r = add_xo1_platform_devices();
......@@ -467,9 +404,6 @@ static int __init olpc_init(void)
return r;
}
register_syscore_ops(&olpc_syscore_ops);
setup_debugfs();
return 0;
}
......
......@@ -10,6 +10,7 @@
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/olpc-ec.h>
#ifdef CONFIG_OLPC
#include <asm/olpc.h>
......
......@@ -3,3 +3,4 @@
#
obj-$(CONFIG_X86) += x86/
obj-$(CONFIG_OLPC) += olpc/
#
# OLPC XO platform-specific drivers
#
obj-$(CONFIG_OLPC) += olpc-ec.o
/*
* Generic driver for the OLPC Embedded Controller.
*
* Copyright (C) 2011-2012 One Laptop per Child Foundation.
*
* Licensed under the GPL v2 or later.
*/
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/olpc-ec.h>
#include <asm/olpc.h>
struct ec_cmd_desc {
u8 cmd;
u8 *inbuf, *outbuf;
size_t inlen, outlen;
int err;
struct completion finished;
struct list_head node;
void *priv;
};
struct olpc_ec_priv {
struct olpc_ec_driver *drv;
struct work_struct worker;
struct mutex cmd_lock;
/* Pending EC commands */
struct list_head cmd_q;
spinlock_t cmd_q_lock;
struct dentry *dbgfs_dir;
/*
* Running an EC command while suspending means we don't always finish
* the command before the machine suspends. This means that the EC
* is expecting the command protocol to finish, but we after a period
* of time (while the OS is asleep) the EC times out and restarts its
* idle loop. Meanwhile, the OS wakes up, thinks it's still in the
* middle of the command protocol, starts throwing random things at
* the EC... and everyone's uphappy.
*/
bool suspended;
};
static struct olpc_ec_driver *ec_driver;
static struct olpc_ec_priv *ec_priv;
static void *ec_cb_arg;
void olpc_ec_driver_register(struct olpc_ec_driver *drv, void *arg)
{
ec_driver = drv;
ec_cb_arg = arg;
}
EXPORT_SYMBOL_GPL(olpc_ec_driver_register);
static void olpc_ec_worker(struct work_struct *w)
{
struct olpc_ec_priv *ec = container_of(w, struct olpc_ec_priv, worker);
struct ec_cmd_desc *desc = NULL;
unsigned long flags;
/* Grab the first pending command from the queue */
spin_lock_irqsave(&ec->cmd_q_lock, flags);
if (!list_empty(&ec->cmd_q)) {
desc = list_first_entry(&ec->cmd_q, struct ec_cmd_desc, node);
list_del(&desc->node);
}
spin_unlock_irqrestore(&ec->cmd_q_lock, flags);
/* Do we actually have anything to do? */
if (!desc)
return;
/* Protect the EC hw with a mutex; only run one cmd at a time */
mutex_lock(&ec->cmd_lock);
desc->err = ec_driver->ec_cmd(desc->cmd, desc->inbuf, desc->inlen,
desc->outbuf, desc->outlen, ec_cb_arg);
mutex_unlock(&ec->cmd_lock);
/* Finished, wake up olpc_ec_cmd() */
complete(&desc->finished);
/* Run the worker thread again in case there are more cmds pending */
schedule_work(&ec->worker);
}
/*
* Throw a cmd descripter onto the list. We now have SMP OLPC machines, so
* locking is pretty critical.
*/
static void queue_ec_descriptor(struct ec_cmd_desc *desc,
struct olpc_ec_priv *ec)
{
unsigned long flags;
INIT_LIST_HEAD(&desc->node);
spin_lock_irqsave(&ec->cmd_q_lock, flags);
list_add_tail(&desc->node, &ec->cmd_q);
spin_unlock_irqrestore(&ec->cmd_q_lock, flags);
schedule_work(&ec->worker);
}
int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf, size_t outlen)
{
struct olpc_ec_priv *ec = ec_priv;
struct ec_cmd_desc desc;
/* Ensure a driver and ec hook have been registered */
if (WARN_ON(!ec_driver || !ec_driver->ec_cmd))
return -ENODEV;
if (!ec)
return -ENOMEM;
/* Suspending in the middle of a command hoses things really badly */
if (WARN_ON(ec->suspended))
return -EBUSY;
might_sleep();
desc.cmd = cmd;
desc.inbuf = inbuf;
desc.outbuf = outbuf;
desc.inlen = inlen;
desc.outlen = outlen;
desc.err = 0;
init_completion(&desc.finished);
queue_ec_descriptor(&desc, ec);
/* Timeouts must be handled in the platform-specific EC hook */
wait_for_completion(&desc.finished);
/* The worker thread dequeues the cmd; no need to do anything here */
return desc.err;
}
EXPORT_SYMBOL_GPL(olpc_ec_cmd);
#ifdef CONFIG_DEBUG_FS
/*
* debugfs support for "generic commands", to allow sending
* arbitrary EC commands from userspace.
*/
#define EC_MAX_CMD_ARGS (5 + 1) /* cmd byte + 5 args */
#define EC_MAX_CMD_REPLY (8)
static DEFINE_MUTEX(ec_dbgfs_lock);
static unsigned char ec_dbgfs_resp[EC_MAX_CMD_REPLY];
static unsigned int ec_dbgfs_resp_bytes;
static ssize_t ec_dbgfs_cmd_write(struct file *file, const char __user *buf,
size_t size, loff_t *ppos)
{
int i, m;
unsigned char ec_cmd[EC_MAX_CMD_ARGS];
unsigned int ec_cmd_int[EC_MAX_CMD_ARGS];
char cmdbuf[64];
int ec_cmd_bytes;
mutex_lock(&ec_dbgfs_lock);
size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
m = sscanf(cmdbuf, "%x:%u %x %x %x %x %x", &ec_cmd_int[0],
&ec_dbgfs_resp_bytes, &ec_cmd_int[1], &ec_cmd_int[2],
&ec_cmd_int[3], &ec_cmd_int[4], &ec_cmd_int[5]);
if (m < 2 || ec_dbgfs_resp_bytes > EC_MAX_CMD_REPLY) {
/* reset to prevent overflow on read */
ec_dbgfs_resp_bytes = 0;
pr_debug("olpc-ec: bad ec cmd: cmd:response-count [arg1 [arg2 ...]]\n");
size = -EINVAL;
goto out;
}
/* convert scanf'd ints to char */
ec_cmd_bytes = m - 2;
for (i = 0; i <= ec_cmd_bytes; i++)
ec_cmd[i] = ec_cmd_int[i];
pr_debug("olpc-ec: debugfs cmd 0x%02x with %d args %02x %02x %02x %02x %02x, want %d returns\n",
ec_cmd[0], ec_cmd_bytes, ec_cmd[1], ec_cmd[2],
ec_cmd[3], ec_cmd[4], ec_cmd[5], ec_dbgfs_resp_bytes);
olpc_ec_cmd(ec_cmd[0], (ec_cmd_bytes == 0) ? NULL : &ec_cmd[1],
ec_cmd_bytes, ec_dbgfs_resp, ec_dbgfs_resp_bytes);
pr_debug("olpc-ec: response %02x %02x %02x %02x %02x %02x %02x %02x (%d bytes expected)\n",
ec_dbgfs_resp[0], ec_dbgfs_resp[1], ec_dbgfs_resp[2],
ec_dbgfs_resp[3], ec_dbgfs_resp[4], ec_dbgfs_resp[5],
ec_dbgfs_resp[6], ec_dbgfs_resp[7],
ec_dbgfs_resp_bytes);
out:
mutex_unlock(&ec_dbgfs_lock);
return size;
}
static ssize_t ec_dbgfs_cmd_read(struct file *file, char __user *buf,
size_t size, loff_t *ppos)
{
unsigned int i, r;
char *rp;
char respbuf[64];
mutex_lock(&ec_dbgfs_lock);
rp = respbuf;
rp += sprintf(rp, "%02x", ec_dbgfs_resp[0]);
for (i = 1; i < ec_dbgfs_resp_bytes; i++)
rp += sprintf(rp, ", %02x", ec_dbgfs_resp[i]);
mutex_unlock(&ec_dbgfs_lock);
rp += sprintf(rp, "\n");
r = rp - respbuf;
return simple_read_from_buffer(buf, size, ppos, respbuf, r);
}
static const struct file_operations ec_dbgfs_ops = {
.write = ec_dbgfs_cmd_write,
.read = ec_dbgfs_cmd_read,
};
static struct dentry *olpc_ec_setup_debugfs(void)
{
struct dentry *dbgfs_dir;
dbgfs_dir = debugfs_create_dir("olpc-ec", NULL);
if (IS_ERR_OR_NULL(dbgfs_dir))
return NULL;
debugfs_create_file("cmd", 0600, dbgfs_dir, NULL, &ec_dbgfs_ops);
return dbgfs_dir;
}
#else
static struct dentry *olpc_ec_setup_debugfs(void)
{
return NULL;
}
#endif /* CONFIG_DEBUG_FS */
static int olpc_ec_probe(struct platform_device *pdev)
{
struct olpc_ec_priv *ec;
int err;
if (!ec_driver)
return -ENODEV;
ec = kzalloc(sizeof(*ec), GFP_KERNEL);
if (!ec)
return -ENOMEM;
ec->drv = ec_driver;
INIT_WORK(&ec->worker, olpc_ec_worker);
mutex_init(&ec->cmd_lock);
INIT_LIST_HEAD(&ec->cmd_q);
spin_lock_init(&ec->cmd_q_lock);
ec_priv = ec;
platform_set_drvdata(pdev, ec);
err = ec_driver->probe ? ec_driver->probe(pdev) : 0;
if (err) {
ec_priv = NULL;
kfree(ec);
} else {
ec->dbgfs_dir = olpc_ec_setup_debugfs();
}
return err;
}
static int olpc_ec_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct olpc_ec_priv *ec = platform_get_drvdata(pdev);
int err = 0;
if (ec_driver->suspend)
err = ec_driver->suspend(pdev);
if (!err)
ec->suspended = true;
return err;
}
static int olpc_ec_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct olpc_ec_priv *ec = platform_get_drvdata(pdev);
ec->suspended = false;
return ec_driver->resume ? ec_driver->resume(pdev) : 0;
}
static const struct dev_pm_ops olpc_ec_pm_ops = {
.suspend_late = olpc_ec_suspend,
.resume_early = olpc_ec_resume,
};
static struct platform_driver olpc_ec_plat_driver = {
.probe = olpc_ec_probe,
.driver = {
.name = "olpc-ec",
.pm = &olpc_ec_pm_ops,
},
};
static int __init olpc_ec_init_module(void)
{
return platform_driver_register(&olpc_ec_plat_driver);
}
module_init(olpc_ec_init_module);
MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_LICENSE("GPL");
......@@ -12,8 +12,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/rfkill.h>
#include <asm/olpc.h>
#include <linux/olpc-ec.h>
static bool card_blocked;
......
......@@ -17,6 +17,7 @@
#include <linux/power_supply.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
#include <linux/olpc-ec.h>
#include <asm/olpc.h>
......
......@@ -27,6 +27,7 @@
#include <linux/uaccess.h>
#include <linux/ctype.h>
#include <linux/reboot.h>
#include <linux/olpc-ec.h>
#include <asm/tsc.h>
#include <asm/olpc.h>
......
#ifndef _LINUX_OLPC_EC_H
#define _LINUX_OLPC_EC_H
/* XO-1 EC commands */
#define EC_FIRMWARE_REV 0x08
#define EC_WRITE_SCI_MASK 0x1b
#define EC_WAKE_UP_WLAN 0x24
#define EC_WLAN_LEAVE_RESET 0x25
#define EC_READ_EB_MODE 0x2a
#define EC_SET_SCI_INHIBIT 0x32
#define EC_SET_SCI_INHIBIT_RELEASE 0x34
#define EC_WLAN_ENTER_RESET 0x35
#define EC_WRITE_EXT_SCI_MASK 0x38
#define EC_SCI_QUERY 0x84
#define EC_EXT_SCI_QUERY 0x85
struct platform_device;
struct olpc_ec_driver {
int (*probe)(struct platform_device *);
int (*suspend)(struct platform_device *);
int (*resume)(struct platform_device *);
int (*ec_cmd)(u8, u8 *, size_t, u8 *, size_t, void *);
};
#ifdef CONFIG_OLPC
extern void olpc_ec_driver_register(struct olpc_ec_driver *drv, void *arg);
extern int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
size_t outlen);
#else
static inline int olpc_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *outbuf,
size_t outlen) { return -ENODEV; }
#endif /* CONFIG_OLPC */
#endif /* _LINUX_OLPC_EC_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册