SolutionEngine771x: add Ether TSU resource

After the  Ether platform data is fixed, the driver probe() method would
still fail since the 'struct sh_eth_cpu_data' corresponding  to SH771x
indicates the presence of TSU but the memory resource for it is absent.
Add the missing TSU resource  to both Ether devices and fix the harmless
off-by-one error in the main memory resources, while at it...

Fixes: 4986b996 ("net: sh_eth: remove the SH_TSU_ADDR")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

arch/sh/boards/mach-se/770x/setup.c

@@ -124,10 +124,15 @@ static struct sh_eth_plat_data sh_eth_plat = {
 static struct resource sh_eth0_resources[] = {
 	[0] = {
 		.start = SH_ETH0_BASE,
-		.end = SH_ETH0_BASE + 0x1B8,
+		.end = SH_ETH0_BASE + 0x1B8 - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
+		.start = SH_TSU_BASE,
+		.end = SH_TSU_BASE + 0x200 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
 		.start = SH_ETH0_IRQ,
 		.end = SH_ETH0_IRQ,
 		.flags = IORESOURCE_IRQ,
@@ -147,10 +152,15 @@ static struct platform_device sh_eth0_device = {
 static struct resource sh_eth1_resources[] = {
 	[0] = {
 		.start = SH_ETH1_BASE,
-		.end = SH_ETH1_BASE + 0x1B8,
+		.end = SH_ETH1_BASE + 0x1B8 - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
+		.start = SH_TSU_BASE,
+		.end = SH_TSU_BASE + 0x200 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
 		.start = SH_ETH1_IRQ,
 		.end = SH_ETH1_IRQ,
 		.flags = IORESOURCE_IRQ,

arch/sh/include/mach-se/mach/se.h

@@ -100,6 +100,7 @@
 /* Base address */
 #define SH_ETH0_BASE 0xA7000000
 #define SH_ETH1_BASE 0xA7000400
+#define SH_TSU_BASE  0xA7000800
 /* PHY ID */
 #if defined(CONFIG_CPU_SUBTYPE_SH7710)
 # define PHY_ID 0x00